NAKAMURASEISAKU Vernier Calipers（Display Method：Digital）

• 

  [Kanon] Vernier Caliper, Flat Head Caliper E-PITA

  NAKAMURASEISAKU

  The flat head makes it easy to measure from any corner.
  [Features]
  ·The design has been completely redesigned! A wide variety of sizes are also available.
  ·Digital type pita calipers.
  ·The display is large and easy to read.
  
  List of vernier calipers List of standard vernier calipers List of digital vernier calipers See how to use vernier caliper

  • STOCK

  Standard Price:	2,800,616 IDR-
  Days to Ship:	1 Day(s)

• 

  [Kanon] Vernier Caliper, Centerline Caliper E-RM-J

  NAKAMURASEISAKU

  Two measurements are possible. Multifunctional round hole pitch vernier caliper.
  [Features]
  ·Both the hole-to-hole pitch and the pitch from the end face to the hole can be "directly read with a single tool".
  ·It can be read directly by offset input.
  ·By setting the upper offset value (15.00 mm) and the lower offset value (7.50 mm), this machine displays the measured pit dimensions in actual size, eliminating the need to calculate additions and subtractions to the displayed values like conventional products. has become much easier to use.
  ·With this single vernier caliper, you can directly read the pitch from hole to hole and the pitch from the edge to the hole.
  [Applications]
  ·Sheet metal processing products and construction housing.
  ·The upper and lower offset values can be easily set by pressing the "SET" button.
  
  List of vernier calipers List of hole pitch vernier calipers List of digital vernier calipers See how to use vernier caliper

  Standard Price:	12,013,847 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Wireless Vernier Caliper E-FW

  NAKAMURASEISAKU

  It helps shorten the quality control and measurement time.
  Just press a button to transmit measurement data.
  The measured value is sent simply by pressing a button after measurement is complete.
  As a transceiver is embedded in the caliper body, no cable is needed.
  The standardly equipped software can generate, from the measurement data, the average value, standard deviation, and pass/fail judgments.
  The receiver is a USB type which can be connected to a computer with a single touch. (1 caliper unit is included)
  
  [USB Receiver]
  · Model: USB-K1
  · Frequency band: 2.4 GHz low power radio
  · Power Source: Supplied from USB Terminal
  · Reception confirmation: LED lights up when receiving
  · Operating temperature range: 0°C – +40°C
  · Operating humidity range: 70% and below relative humidity
  · Mass: 10 g
  · Dimensions: 27 X 50.6 X 13 mm

  Standard Price:	13,293,846 IDR-
  Days to Ship:	8 Day(s) or more

• 

  [Kanon] Vernier Caliper, Long Jaw Caliper E-LSM

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring diameters for spheres, pipes, etc.
  · Long jaw calipers with "long length jaw" ideal for measuring large diameter pipes, etc.
  · Outer jaw length is 1/2 or more of the measurement length, ideal for diameter measurement of spheres, pipes, etc.
  · Printer output function included

  • STOCK

  Standard Price:	28,955,655 IDR
  Days to Ship:	10 Day(s) or more

• 

  [Kanon] ULJ Caliper with Judgment Function

  NAKAMURASEISAKU

  [Features]
  · "Judgment function" allows pass/fail to be determined instantly.
  · When dividing go/no-go products for mass production parts, work time can be significantly reduced.
  · By setting the acceptance criteria for the measured workpiece in advance, the OK/NG display can be checked instantaneously on the panel.
  · Anyone can make measurements, simply and quickly.
  · The flat head tip perfectly contacts complex shapes that had been difficult to measure with conventional calipers, allowing end face measurement without stress

  Standard Price:	2,172,450 IDR-
  Days to Ship:	8 Day(s) or more

• 

  [Kanon] Large Caliper EMA

  NAKAMURASEISAKU

  [Features]
  · A standard long digital vernier caliper.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For measuring turned workpieces.

  Standard Price:	10,496,719 IDR-
  Days to Ship:	1 Day(s) or more

• 

  [Kanon] Centerline Caliper E-RX

  NAKAMURASEISAKU

  [Features]
  · The pitch of circular holes can be measured by direct reading.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For measuring at various machining sites.

  • STOCK

  Standard Price:	16,101,538 IDR
  Days to Ship:	1 Day(s)

• 

  [Kanon] Centerline Caliper E-RM60B

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch between holes of the same diameter on a long workpiece.
  · Large digital calipers with a "measurement length of 600 mm" ideal for equal diameter hole measurements with long workpieces.
  · Long calipers which can measure the pitch between 2 holes of the same diameter and the distance between the edge and the hole center.
  · A dedicated gauge block is supplied as an accessory.
  · Printer output function included

  Standard Price:	24,646,251 IDR
  Days to Ship:	10 Day(s) or more

• 

  [Kanon] Centerline Caliper E-RM30DX

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring hole pitch from wall surfaces.
  · A multifunction, direct reading type, digital round hole pitch caliper, with which "3 measurements" can be enabled by replacing the gauge head.

  Standard Price:	13,473,683 IDR
  Days to Ship:	10 Day(s) or more

• 

  [Kanon] Vernier Caliper For Inside Measurement E-ICM-J

  NAKAMURASEISAKU

  [Features]
  · Ideal for internal measurements in deep places.
  · Inside calipers with a "long-narrow jaw" ideal for inner depth measurements.
  · Long and thin jaw is ideal for internal measurements in deep holes.
  · A digital direct reading type

  Standard Price:	7,635,045 IDR
  Days to Ship:	8 Day(s) or more

• 

  [Kanon] Digital Blade Caliper E-BL

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the gap between grooves for narrow grooved workpieces.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For measuring the gap between grooves for narrow workpieces.

  Standard Price:	11,241,538 IDR
  Days to Ship:	Quote

• 

  [Kanon] Caliper E-PEAK

  NAKAMURASEISAKU

  [Features]
  · Evolution of calipers (leading to reduced measurement time and labor saving).
  · Automatically retains the maximum and minimum values.
  · The maximum value mode (Max) is useful for measuring inner diameters. The E-PEAK calipers automatically hold the maximum value of the inner diameter.
  · Minimum value mode is convenient for outer diameter measurements in hard-to-see places. E-PEAK calipers automatically maintain the minimum value of the outer diameter.

  • STOCK

  Standard Price:	1,432,273 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Digital Round Hole Pitch Gun

  NAKAMURASEISAKU

  An excellent product with a digital display that can be read from an overhead view (looking down from above).
  [Features]
  · Optimal for measuring the pitch of circular holes. Direct-reading type.
  [Applications]
  · For measurement at various drilling sites.
  [Material]
  · Stainless steel (SUS420J2)

  Standard Price:	29,446,154 IDR
  Days to Ship:	12 Day(s)

Loading...