(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 23/2/2025 sampai dengan 6:00 pada tanggal 24/2. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 23/2 to 6:00 (WIB) 24/2/2025. We apologize for the inconvenience. - Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
NACHI(FUJIKOSHI) Square End Mills (Carbide)
| Days to Ship |
|
|---|
-
NACHI(FUJIKOSHI)
Capable of continuous high-performance drilling of holes and grooving with a wide range of materials, from raw materials to hardened materials.
Standard Price: 670,707 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL Slot 1.5D GSXSLT-1.5D
NACHI(FUJIKOSHI)
Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.
Standard Price: 417,085 IDR- Days to Ship: 8 Day(s) or more -
NACHI(FUJIKOSHI)
Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.
Standard Price: 584,662 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 4-Flute Blade 4D GSX4C-4D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Standard Price: 454,467 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 2-Flute Blade 4D GSX2C-4D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Standard Price: 351,390 IDR- Days to Ship: 8 Day(s) or more -
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.
Standard Price: 361,344 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Standard Price: 313,124 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 4-Flute Blade 2D GSX4C-2D
NACHI(FUJIKOSHI)
[Specifications]
· Shape: Square end mill (carbide)
· Coating: For General Steels (AlCrN, etc.)
· Work Material: General Steel [◎] / Tempered Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Casting [○] / Titanium [◎]
[Applications] Flat surfaces / side surfaces / grooves / inclined cuttingStandard Price: 313,124 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL VL Slot 2.5D GSXVLSLT3-2.5D
NACHI(FUJIKOSHI)
[Features]
· Reduces chattering, and capable of continuous high-efficiency machining from hole drilling to groove cutting.Standard Price: 761,246 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 3-Flute Blade 1.5D GSX3C-1.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Standard Price: 313,124 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Standard Price: 313,124 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 4-Flute Blade 3D GSX4C-3D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Standard Price: 313,124 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 2-Flute Blade 3D GSX2C-3D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Standard Price: 203,632 IDR- Days to Ship: 8 Day(s) or more -
NACHI(FUJIKOSHI)
Capable of high-feed and high-efficiency groove machining. Supports a wide range of applications from mold steel to difficult-to-cut materials.
Standard Price: 727,423 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 4-Flute Blade 1D GSX4C-1D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Standard Price: 313,124 IDR- Days to Ship: 8 Day(s) or more -
NACHI(FUJIKOSHI)
General purpose carbide end mill. Suitable for side surface machining.
Standard Price: 489,618 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 4-Flute Blade 2.5D P Type GSX4P-2.5D
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.
Standard Price: 313,124 IDR- Days to Ship: 8 Day(s) or more -
DLC Mill Long Sharp Corner, 2-Flute SL2DLCSC
NACHI(FUJIKOSHI)
End mill for aluminum, suitable for a wide range of side wall machining, grooving deep grooves or grooving in deep locations.
Standard Price: 759,628 IDR- Days to Ship: 8 Day(s) or more -
NACHI(FUJIKOSHI)
The GS hard coating makes it ideal for ultra-high-speed machining of high-hardness materials.
Standard Price: 713,841 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 2-Flute Blade 2.5D GSX2C-2.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials. The blade edge is a Gash Land type.
Standard Price: 203,632 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 2-Flute Blade 2.5D P Type GSX2P-2.5D
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing. Cutting edge has a sharp corner.
Standard Price: 203,632 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 2-Flute Blade 2D GSX2C-2D
NACHI(FUJIKOSHI)
[Specifications]
· Shape: Square end mill (carbide)
· Coating: For General Steels (AlCrN, etc.)
· Work Material: General Steel [◎] / Tempering Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Titanium [◎]
· Blade Shape: With Lead
[Applications] Flat surfaces / side surfaces / grooves / inclined cuttingStandard Price: 203,632 IDR- Days to Ship: 8 Day(s) or more -
NACHI(FUJIKOSHI)
Variable split and variable leads have been used to suppress chatter which is likely to occur during high-speed and high-efficiency processing.
Standard Price: 753,010 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL VL Ti/ SUS 2.5D GSXVL4T-2.5D
NACHI(FUJIKOSHI)
The variable split, variable lead, and sharp cutting edge suppress chatter and make it suitable for heat-resistant alloys.
Standard Price: 793,710 IDR- Days to Ship: 8 Day(s) or more -
NACHI(FUJIKOSHI)
Capable of high-efficient machining of hardened materials. Suitable for wide side finishing.
Standard Price: 1,689,343 IDR- Days to Ship: 8 Day(s) or more -
X's Mill Geo Long Shank 4GEOLS
NACHI(FUJIKOSHI)
High precision machining is possible even for deep engraving.
Standard Price: 855,472 IDR- Days to Ship: 8 Day(s) or more -
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing.
Standard Price: 255,170 IDR- Days to Ship: 8 Day(s) or more -
Carbide Mini Square End Mill with 2 Flutes 2MNE
NACHI(FUJIKOSHI)
Carbide solid type small diameter end mill. Suitable for grooving precision molds and precision components.
Standard Price: 520,807 IDR- Days to Ship: 8 Day(s) or more -
Carbide Mini Square End Mill with 4 Flutes 4MNE
NACHI(FUJIKOSHI)
Carbide solid type small diameter end mill. Suitable for side-wall machining precision molds and precision components.
Standard Price: 650,176 IDR- Days to Ship: 8 Day(s) or more -
NACHI(FUJIKOSHI)
[Features]
· End mill for aluminum and copper alloys.
· Dry machining of aluminum is possible.Standard Price: 493,619 IDR- Days to Ship: 8 Day(s) or more -
NACHI(FUJIKOSHI)
Supports a wide range of applications from raw materials to high hardness steel.
Standard Price: 862,041 IDR- Days to Ship: 8 Day(s) or more -
NACHI(FUJIKOSHI)
Suitable for side processing of wide side surfaces and deep positions.
Standard Price: 1,002,732 IDR- Days to Ship: 8 Day(s) or more -
Standard Price: 344,957 IDR- Days to Ship: 8 Day(s) or more -
DLC Mill, Sharp Corner, 2-Flute 2DLCSC
NACHI(FUJIKOSHI)
End mill for aluminum and copper alloys. Adopts sharp corners.
Standard Price: 493,619 IDR- Days to Ship: 8 Day(s) or more -
DLC Mill Slot Long Shank DLCSLTLS
NACHI(FUJIKOSHI)
Capable of continuous high-efficiency machining of aluminum alloys from hole drilling to groove cutting. Suitable for deep engraving work.
Standard Price: 599,991 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 3-Flute Blade 2D GSX3C-2D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Standard Price: 313,124 IDR- Days to Ship: 8 Day(s) or more -
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for side surface machining.
Standard Price: 1,298,703 IDR- Days to Ship: 10 Day(s) or more -
Standard Price: 378,578 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 2-Flute Blade 1.5D GSX2C-1.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials. The blade edge is a Gash Land type.
Standard Price: 203,632 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL VL Long Shank 1.5D GSXVLLS4-1.5D
NACHI(FUJIKOSHI)
[Features]
· Minimizes chattering during machining on vertical walls or deep engraving, allowing highly efficient high quality machining to be performed.
· For steel.Standard Price: 937,539 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL VL Long Shank 1.5 D for Ti/SUS GSXVLLS4T-1.5D
NACHI(FUJIKOSHI)
[Features]
· Minimizes chattering during machining on vertical walls or deep engraving, allowing highly efficient high-quality machining to be performed.Standard Price: 937,539 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL VL Multi-Edged 2.5D GSXVL6-2.5D
NACHI(FUJIKOSHI)
[Features]
· Unequal division and unequal lead enable high-speed and high-grade processing.
· For steel.Standard Price: 1,116,265 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL VL Multi-blade 2.5D for Ti/SUS GSXVL6T-2.5D
NACHI(FUJIKOSHI)
[Features]
· Unequal division and unequal lead enable high-speed and high-grade processing.
· For SUS/heat-resistant alloy.Standard Price: 1,204,882 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL VL Hard 2.5D GSXVLH6-2.5D
NACHI(FUJIKOSHI)
[Features]
· Unequal division and unequal lead enable high-speed and high-grade processing.
· For high-hardness materials.Standard Price: 1,332,475 IDR- Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) |
| Product Series | ||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more |
| Blade diameter (D)(φ) | 1 ～ 16 | 1 ～ 16 | 3 ～ 16 | 1 ～ 20 | 1 ～ 20 | 1 ～ 18 | 1 ～ 20 | 1 ～ 20 | 3 ～ 16 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 2 ～ 32 | 1 ～ 20 | 2 ～ 20 | 1 ～ 20 | 3 ～ 20 | 1 ～ 20 | 0.2 ～ 20 | 1 ～ 20 | 1 ～ 20 | 3 ～ 20 | 3 ～ 20 | 6 ～ 20 | 3 ～ 20 | 0.2 ～ 20 | 0.1 ～ 2 | 1 ～ 2 | 1 ～ 20 | 2 ～ 20 | 3 ～ 20 | 1 ～ 20 | 1 ～ 20 | 2 ～ 20 | 1 ～ 20 | 2 ～ 20 | 2 ～ 20 | 1 ～ 20 | 3 ～ 20 | 3 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 |
| Blade length (ℓ)(mm) | 3 ～ 32 | 1.5 ～ 24 | 8 ～ 32 | 4 ～ 80 | 4 ～ 80 | 2.5 ～ 32 | 1.5 ～ 30 | 2 ～ 40 | 7.5 ～ 40 | 1.5 ～ 30 | 2.5 ～ 50 | 3 ～ 60 | 3 ～ 60 | 6 ～ 70 | 1 ～ 20 | 6 ～ 38 | 2.5 ～ 50 | 12 ～ 56 | 3 ～ 38 | 0.5 ～ 50 | 2.5 ～ 50 | 2 ～ 40 | 7.5 ～ 50 | 7.5 ～ 50 | 25 ～ 75 | 4.5 ～ 30 | 0.4 ～ 38 | 0.2 ～ 6 | 3 ～ 6 | 3 ～ 38 | 10 ～ 56 | 18 ～ 75 | 3 ～ 38 | 3 ～ 38 | 3 ～ 30 | 2.5 ～ 40 | 6 ～ 38 | 6 ～ 38 | 1.5 ～ 30 | 4.5 ～ 30 | 4.5 ～ 30 | 15 ～ 50 | 15 ～ 50 | 15 ～ 50 |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 12 ～ 82 | - | - | - | - | - | - | - | - | 8 ～ 82 | - | - | - | - | 15 ～ 100 | 15 ～ 100 | - | - | - |
| Shank diameter (d)(mm) | 4 ～ 16 | 4 ～ 16 | 6 ～ 16 | 4 ～ 20 | 4 ～ 20 | 3 ～ 20 | 4 ～ 20 | 4 ～ 20 | 6 ～ 16 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 32 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 6 ～ 20 | 6 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 3 ～ 20 | 3 ～ 4 | 4 | 4 ～ 20 | 4 ～ 20 | 6 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 |
| Number of flutes(sheet) | 3 | 3 | 3 | 4 | 2 | 4 | 4 | 4 | 3 | 3 | 4 | 4 | 2 | 4 | 4 | 4 | 4 | 2 | 4 ～ 8 | 2 | 2 | 2 | 4 | 4 | 6 ～ 8 | 4 | 2 | 2 | 4 | 2 | 4 | 4 | 2 | 2 | 3 | 3 | 4 | 2 | 2 | 4 | 4 | 6 | 6 | 6 |
| Overall Length (L)(mm) | 50 ～ 115 | 40 ～ 90 | 50 ～ 115 | 40 ～ 140 | 40 ～ 140 | 38 ～ 100 | 40 ～ 100 | 40 ～ 100 | 45 ～ 90 | 40 ～ 100 | 40 ～ 100 | 40 ～ 120 | 40 ～ 120 | 50 ～ 175 | 40 ～ 100 | 50 ～ 100 | 40 ～ 100 | 50 ～ 125 | 50 ～ 100 | 40 ～ 100 | 40 ～ 100 | 40 ～ 100 | 45 ～ 100 | 45 ～ 100 | 70 ～ 155 | 60 ～ 200 | 38 ～ 100 | 40 | 40 | 40 ～ 100 | 50 ～ 125 | 60 ～ 155 | 50 ～ 100 | 40 ～ 100 | 50 ～ 200 | 40 ～ 100 | 40 ～ 100 | 50 ～ 100 | 40 ～ 100 | 60 ～ 160 | 60 ～ 160 | 50 ～ 100 | 50 ～ 100 | 50 ～ 100 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Aluminum[◎] / Copper[○] | Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] | Stainless Steel[◎] / Titanium[◎] | Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Cast Iron[○] | Stainless Steel[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Cast Iron[○] | Stainless Steel[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC65[○] |
| Torsion Angle (θ) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Variable lead | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | - | - | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Variable lead | Variable lead | Variable lead | Variable lead | Variable lead |
| Machining Application | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Groove | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Side | Side | Side | Side | Side |
| Coating | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) | - | For General Steels (AlCrN, etc.) | DLC | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | - | - | DLC | TiAlN | TiAlN | - | DLC | DLC | For General Steels (AlCrN, etc.) | TiAlN | - | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) |
| Blade tip shape | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | With Lead | With Lead | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | With Lead | With Lead | Sharp Edge | Sharp Edge | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge |
| Type | Square | Square | Square | Square | Square | Square | Square | Square | High Helical | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | High Helical | Square | High Helical | High Helical |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.8
-
14～14.8
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.7
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.7
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.6
- 47
- 47.2
- 47.5
- 47.6
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60
-
63
-
64
-
65
-
67
-
70
-
75
-
80
-
83
-
85
-
90
-
100
-
103
-
110
-
120
-
130
-
150
-
200
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Torsion Angle (θ)
-
Machining Application
-
Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- DG
-
Blade tip shape
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
Narrow search by specifying Manufacturer
-
- MISUMI (74)
- NS TOOL (106)
- OSG (77)
- NACHI(FUJIKOSHI) (44)
- GUHRING (43)
- KYOCERA (25)
- DIJET (24)
- MITSUBISHI HITACHI TOOL (23)
- ASAHI TOOLS (17)
- OKAZAKI SEIKO (16)
- SANDVIK (15)
- SUMITOMO ELECTRIC HARDMETAL (14)
- 7 LEADERS (13)
- KYOWA SEIKO (13)
- THE CUT (12)
- EIKOSHA (6)
- SANKO MFG (6)
- TOYO DRILL (5)
- ATOM (5)
- MAPAL (5)
- ISCAR (3)
- OMIKOGYO (3)
- GCT (2)
- Poulten&Graf (2)
- UNION TOOL (2)
- MITSUBISHI MATERIALS (1)
- PROCHI (1)
- TAIYO-TOOL (1)
- VAN HOORN (1)
- WIDIN (1)
CAD
-
- 2D
- 3D
Related Categories to Square End Mills (Carbide)
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy