NABEYA Vises

• 

  Maker's Vise Wedge locking tool

  NABEYA

  [Features]
  · The accuracy is higher than the former JIS 0 class.
  · Tightening from the front is possible when mounted on a 1, 2 or 4-sided angle plate.
  · Uses SCM440 material that is hardened to HRC50 or higher to retain precision for longer.
  · Back surface has a guide block so precision can be easily improved

  Standard Price:	23,487,263 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Pull Down Vise【2 Pieces Per Package】

  NABEYA

  Handles small mouth openings caused by defects in machine vise, milling vise, shaper vise, or similar. Can grasp without restriction by matching up the table of the planar, shaper, milling cutter, or horizontal boring machine, etc., and the workpiece. The workpiece can be prevented from rising up with strong clamping as it is pulled down while clamped. Thanks to the use of specially made ductile iron, the body is damage-proof.

  Standard Price:	7,976,453 IDR-
  Days to Ship:	8 Day(s) or more

• 

  CV Vise Chip Cover

  NABEYA

  Loctite CV precise machine vise parts.

  Standard Price:	716,312 IDR
  Days to Ship:	8 Day(s) or more

• 

  Loctite CV Precision Machine Vise

  NABEYA

  The opening is nearly doubled compared with vises of the same class. Equipped with a pressure replenishment mechanism which does not disturb the operation when the pressure drops, enabling cutting fluid or fine chips in the body to be ejected from the blow hole using the chip blow mechanism. For the mechanical type, the handle can be operated even on the fixed clamp side. The LTCV-TH is a hydraulic internal type with a specification in which the handle is operated from the fixed clamp side.

  Standard Price:	28,893,270 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Vise Mounting Bolt Set【3 Pieces Per Package】

  NABEYA

  Provided as a set for vise mounting. A set that includes 3 bolts, 3 flat washers, and 3 spring washers.

  Standard Price:	284,268 IDR-
  Days to Ship:	8 Day(s) or more

• 

  C Clamp

  NABEYA

  [Features]
  · It is for light work in steel-plate pressing.
  · Lower price with mass production.
  · The handle is unichrome plated.

  Standard Price:	72,967 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Mounting Bolt Set

  NABEYA

  [Features]
  A component of Machine Vise Series · A mounting bolt.
  ·Compatible vise: LT200M,LT250M,LT-HPD80E
  ·Compatible slot width: 22 mm
  ·Set contents: TNM2220 (T-slot nut), FNM0020 (flange nut), BM20100 (stud bolt)

  Standard Price:	859,015 IDR
  Days to Ship:	11 Day(s) or more

• 

  Precision Parallel Block Set

  NABEYA

  [Features]
  · The 4 sides excluding the end faces have undergone finishing grinding and are machined in pairs.
  · S50C type hardened to HRC46-53 with improved wear resistance.
  · Comes inside a strong wooden storage case.
  · Also sold separately.
  · By using a high-precision parallel block to find the parallelism, precision machining can be performed while preventing the workpiece from floating

  Standard Price:	9,199,528 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Loctite Precision Machine Vise L Type

  NABEYA

  The opening is 45% bigger compared with vises of the same type (LT150M). Weight is 20% lighter than vises of the same size to make it easy to carry. The lifting prevention mechanism suppresses the uplift of a movable object or workpiece. It is made of ductile cast iron, preventing warping and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched.

  Standard Price:	19,706,947 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Loctite MC Jig Vise

  NABEYA

  A jig vise for MS.FA with a lifting prevention mechanism that suppresses the uplift of a movable object or workpiece. It incorporates a patent-pending hydraulic mechanism and enables smooth operation. Cost cutting is also possible through use as a horizontal, upright, or MC vise. Can be used for an upright MC or milling machine with the same precision as a 2-face, 4-face, or angle rest, on a horizontal type MC.

  Standard Price:	121,292,024 IDR
  Days to Ship:	11 Day(s) or more

• 

  Clamp Master Vise PA Spring

  NABEYA

  [Features]
  PA spring parts for clamp master vise.
  Compatible vise is EPA100-4.

  Standard Price:	424,482 IDR
  Days to Ship:	15 Day(s) or more

• 

  Loctite Precision Machine Vise

  NABEYA

  The lifting prevention mechanism suppresses the lifting of movable parts or workpieces. Made of ductile cast iron to prevent bending and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched (HRC45). The accuracy is higher than the former JIS 0 class. Even if it wears off, it can be easily disassembled to correct accuracy. The parallel accuracy of the parallel specification is within 0.01.

  Standard Price:	16,978,378 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Loctite 5-Axis Machine Vise

  NABEYA

  Raised structure that avoids the interference of the machine spindle: The length of the cutter can be shortened to reduce processing time and labor. Loctite lift prevention mechanism: A hemispherical segment is used to apply force on the movable part in a downward sloping direction at 45 degrees in order to prevent the workpiece from rising up. Socket replacement type: Three types of socket are included as standard and can be selected according to the machining conditions.

  Standard Price:	36,896,148 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Tool maker's vise

  NABEYA

  [Features]
  · Made of fully quenched materials, this is a precision tool that is finished by polishing.
  · The accuracy is within 5 microns in both squareness and parallelism.
  · Each machine comes with a beautiful wooden box case.

  Standard Price:	24,876,472 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Yankee Vise Spindle

  NABEYA

  Precision Small Boring Machine Vise Spindle

  Standard Price:	539,618 IDR-
  Days to Ship:	8 Day(s) or more

• 

  JIS Vise

  NABEYA

  For cast parts, the tough cast iron body, the movable body, and the female thread are designed to maintain sufficient strength with a hard material cast under the quality control of a JIS factory. Heading is used for the stopper balls on both ends of the handle to prevent them from falling out. Features rubber rings attached on both ends of the handle on the inside to prevent hands and fingers from getting caught.

  Standard Price:	7,720,938 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Jig Vise Jaw Plates

  NABEYA

  Optional parts for the machining vise series.

  Standard Price:	4,508,037 IDR
  Days to Ship:	11 Day(s) or more

• 

  Handle Joint for Loctite CV Precision Machine Vise

  NABEYA

  [Features]
  A component for Lock-Tight CV Precision Machine Vises.
  A handle joint.
  · RoHS compliant
  ·Overall length: 200 mm / 250 mm / 300 mm / 350 mm / 400 mm
  ·Compatible models: Common to all CV models

  Standard Price:	735,235 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Beta Vise Spindle

  NABEYA

  The movable part slides smoothly along the central groove. Designed to sufficiently withstand powerful tightening. FC250 is used for the main body and movable parts, preventing it from being damaged even when used for heavy-duty work. Planar processing on the bottom surface is particularly precisely finished, and does not tilt or deviate on the drill table.

  Standard Price:	544,178 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Loctite Double Clamp Vise

  NABEYA

  Double clamp type when shipped. Two workpieces can be quickly clamped at the same time even when they have different sizes. When tightened, the Loctite lift prevention mechanism restrains the workpiece from rising up. Can be made into a single clamp type as the standard accessories are reassembled, and the body is made of ductile cast iron that has been quenched on the sliding surface.

  Standard Price:	50,056,708 IDR-
  Days to Ship:	11 Day(s) or more

• 

  FA Mouthpiece for Machine Vise

  NABEYA

  [Features]
  A standard fitting for Machine Vise Series.
  ·Thread diameter: M8/M10/M12
  ·Compatible vise: LTFV75/LTFV100Q/LTFV·LTFH125Q/LTFV·LTFH150Q/LTFV·LTFH175Q

  Standard Price:	2,095,660 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Guide Block【2 Pieces Per Package】

  NABEYA

  S45C machine vise series guide block.

  Standard Price:	719,503 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Foot Jaw

  NABEYA

  Convenient for 5-face machining of the workpiece. Securely clamps the workpiece base. Two types of clamp are available depending on the workpiece. FOJ-BS is suitable for ferrous metals and FOJ-GS for non-ferrous metals.

  Standard Price:	6,403,380 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Flat Jaw Plates for 5-Axis Machine Vise

  NABEYA

  [Features]
  A flat jaw plate for Lock-Tight 5-Axis Machine Vises.
  ·Compatible vise: LT5AU-75 (F,FM)/LT5AU-75,100 (M)/LT5AU-100 (M)

  Standard Price:	1,276,505 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Joint bar

  NABEYA

  [Features]
  A Joint bar for Lock-Tight MC Jig Vises.
  ·Effective length: 0 mm / 150 mm

  Standard Price:	692,600 IDR-
  Days to Ship:	11 Day(s) or more

• 

  2 piece vise

  NABEYA

  [Features]
  · Capable of easily clasping long objects that cannot be tightened with machine vises.
  · Can clamp any work whatever the table (milling machine, sabre, boring machine, etc.) is.
  · Convenient for processing of mass produced products.
  · Large opening depth.

  Standard Price:	15,342,196 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Beta Vise

  NABEYA

  The movable part slides smoothly along the central groove. Designed to sufficiently withstand powerful tightening. FC250 is used for the main body and movable parts, preventing it from being damaged even when used for heavy-duty work. Planar processing on the bottom surface is particularly precisely finished, and does not tilt or deviate on the drill table.

  Standard Price:	1,916,790 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Loctite CV Precision Machine Vise Jaws

  NABEYA

  Standard clamp for machining vise.

  Standard Price:	2,489,857 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Work Stop

  NABEYA

  Optional parts for the machining vise series.

  Standard Price:	1,007,913 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Pull Down Vise Mouthpiece Coarse【2 Pieces Per Package】

  NABEYA

  Standard clamp (coarse) for pull-down vise (free jaw vise).

  Standard Price:	1,031,624 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Machine Vise Handle

  NABEYA

  Machine vise handle.
  [Features]
  · Machine vise replacement part.
  · Optional part for the machine vise series.
  [Application]
  · Replacement handle for the machine vise.

  Standard Price:	821,872 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Mold Vise

  NABEYA

  Ideal for machining mold plates. Features a large opening and fast-feed mechanism. The jaw opens 30% larger than conventional hydraulic vises to make the unit 30% more compact (in-house comparison). The main body and movable parts are made of ductile cast iron that does not get damaged, and the sliding surface features outstanding wear resistance thanks to the flame quenching. Provides overwhelmingly superior cost performance when compared with vises of the same size.

  Standard Price:	40,762,199 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Loctite Precision Machine Vise Jaws

  NABEYA

  Optional parts for the machining vise series.

  Standard Price:	2,095,660 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Thin Type Parallel Block

  NABEYA

  [Features]
  · The height is designed with the jaw depth of the vise in mind.
  · A thin type that's convenient for machining through holes close to the end face of a workpiece (especially the step type).
  · A 2-piece set.

  Standard Price:	2,487,318 IDR-
  Days to Ship:	8 Day(s) or more

• 

  FA Step Mouthpiece for Machine Vise

  NABEYA

  [Features]
  A step jaw plate for Machine Vise Series.
  ·Thread diameter: M8/M10/M12
  ·Compatible vise: LTFV75/LTFV100Q/LTFV·LTFH125Q/LTFV·LTFH150Q/LTFV·LTFH175Q

  Standard Price:	2,489,857 IDR-
  Days to Ship:	10 Day(s) or more

• 

  JIS Vise Collar

  NABEYA

  [Features]
  A JIS vise collar for horizontal vise parts.
  ·Compatible vise: A75/A100/A125/A150

  Standard Price:	233,882 IDR-
  Days to Ship:	12 Day(s) or more

• 

  JIS Vise Mouthpiece (2 Pieces 1 Set)

  NABEYA

  [Features]
  · JIS vise base (2-piece set) for side-vise parts

  Standard Price:	968,470 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Clamp Master Vise Guide Bar

  NABEYA

  [Features]
  Guide bar parts for clamp master vise.
  Compatible models are EVS, ETS, EPA, ETPA-75-3 (EVS75-GB), EVS, ETS, EPA, ETPA-100-4 (EVS100-GB), EVS, EPA-150-6 (EVS150-GB), EVS200-8 (EVS200-GB).

  Standard Price:	613,715 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Clamp Master Vise Knob (Black)

  NABEYA

  [Features]
  Holding Ball part of clamp master vise (Black).
  Compatible models are EVS200-8.

  Standard Price:	523,887 IDR
  Days to Ship:	15 Day(s) or more

• 

  Beta Vise Mouthpiece

  NABEYA

  Beta vise model A components for medium drilling machines.

  Standard Price:	501,772 IDR
  Days to Ship:	10 Day(s) or more

• 

  Hobby Vise (Bench Vise)

  NABEYA

  One unit does the work of three. (1) Vise (2) Pipe/Vise (3) Anvil

  Standard Price:	767,215 IDR
  Days to Ship:	8 Day(s) or more

• 

  Magnetic Clasp

  NABEYA

  [Features]
  · Can be mounted on your current vise with the magnet.
  · Can be used for any vise whether it is industrial or for do-it-yourself carpenters, machine vises, or work vises.

  Standard Price:	871,259 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Yankee Vise Rear Panel

  NABEYA

  Precision small boring machine vise rear plate.

  Standard Price:	385,040 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Woodworking vise for school teaching materials (understand type)

  NABEYA

  [Features]
  · A tool type that can be mounted on the top surface of a workbench.
  · The main body and movable parts are made of robust hard cast iron FC250.
  · Trapezoidal screws are used for powerful tightening.
  · Stopper balls are integrated casting, so they will not come off.
  · All parts are interchangeable and replaceable.

  Standard Price:	2,737,058 IDR-
  Days to Ship:	11 Day(s) or more

• 

  CV Vise Chip Cover Unit

  NABEYA

  Loctite CV precise machine vise parts.

  Standard Price:	1,812,038 IDR
  Days to Ship:	8 Day(s) or more

Loading...