MIYAWAKI Drain Traps, Steam Traps（Nominal Diameter：25A）

• 

  Disc Type Air Trap, S31N Type

  MIYAWAKI

  [Features]
  ・ The automatic blow-off mechanism significantly speeds up the startup time. Smoothly discharges low-temperature condensate and air at the beginning of ventilation
  ・ No restrictions on mounting orientation
  ・ Unit replacement of main parts is possible
  [Applications]
  ・ Food and cleaning equipment
  ・ Steam transport pipe
  ・ General equipment such as heat exchangers

  Standard Price:	4,269,200 IDR-
  Days to Ship:	17 Day(s) or more

• 

  Ball Float Steam Trap, GC1 Type

  MIYAWAKI

  [Features]
  ・ Energy saving design (Orifice self-adjusting continuous discharge float type): It achieves high sealing performance by using a high-precision polishing float. Reduces steam loss
  ・ Automatic blow-off mechanism (Built-in bimetal): Automatically discharges air and low-temperature condensate at the beginning of ventilation
  ・ Stainless Steel: All parts except bimetal are made of stainless steel which is resistant to corrosion and has excellent durability
  ・ Compact design: The number of parts is small and maintenance and inspection can be performed easily
  [Applications]
  ・ Steam transport pipe
  ・ Steam trace, etc.

  Standard Price:	8,901,833 IDR-
  Days to Ship:	22 Day(s) or more

• 

  Disc Type Air Trap, AV Type

  MIYAWAKI

  [Features]
  ・ Bypass piping can be omitted and it is cost-effective
  ・ By operating the handle to open the blow valve, scale and oil can be easily removed even during operation
  ・ With ideal on and off operation, condensate is discharged quickly.
  ・ Maintenance can be done easily by unitizing the main parts
  [Applications]
  ・ Suitable for air piping, after-cooler, receiver tank, etc.

  Standard Price:	7,789,167 IDR
  Days to Ship:	22 Day(s) or more

• 

  Diaphragm Type Steam Trap, DC1 Type

  MIYAWAKI

  [Features]
  ・ Since it operates at a temperature below the saturation temperature, there is no steam leakage. Due to the operating characteristics following the saturation temperature, a wide pressure range can be used without adjustment
  ・ Quickly discharges low-temperature condensate and air at the beginning of aeration. Also functions as an air vent
  ・ It can be installed in a small space, and can be installed in both vertical and horizontal pipes. The number of parts is small and maintenance can be easily performed
  ・ The main body and essential materials are made of stainless steel and have excellent corrosion resistance
  [Applications]
  ・ Suitable for food / bio equipment, small heat exchanger / tank heating, steam main pipe / steam trace / cleaning equipment, etc.

  Standard Price:	4,945,500 IDR
  Days to Ship:	22 Day(s) or more

• 

  Disc Type Steam Trap, S55 Type

  MIYAWAKI

  [Features]
  ・ Improvement of energy saving: It achieved valve closing below the steam saturation temperature, significantly reducing steam entrainment and leakage
  ・ Improved durability: Further improved durability of the valve seat (SUS)
  ・ Lightweight and miniaturization: The manufacturer is aiming to reduce costs through a lightweight and compact design
  ・ It uses an automatic blow-off mechanism: The interior bimetal smoothly discharges the air and low-temperature condensate at the beginning of ventilation
  [Applications]
  ・ High temperature / high pressure steam main pipe
  ・ Equipment

  Standard Price:	6,984,943 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Disc Type Steam Trap, SU2N/SU2H Type

  MIYAWAKI

  [Features]
  ・ The automatic blow-off mechanism significantly speeds up the startup time. Smoothly discharges low-temperature condensate and air at the beginning of ventilation
  ・ No restrictions on mounting orientation
  ・ Face to face can be made to order
  [Applications]
  ・ Steam transport pipe
  ・ Steam trace

  Standard Price:	7,912,667 IDR-
  Days to Ship:	22 Day(s) or more

• 

  BELL-MIGHTY Steam Trap, ES5/E5/8N/8B/10/12N Type

  MIYAWAKI

  [Features]
  ・ Double air-water separation (U-shaped passage of lift fitting structure and function of downward bucket) ensures air-water separation, and no steam entrapment leakage, etc.
  ・ Since the water is discharged intermittently or continuously depending on the amount of condensed water generated, there is no accumulation of condensed water on the primary side
  ・ Ideal almighty setting for various applications such as equipment, steam main pipes, etc.
  [Applications]
  ・ Plant industry
  ・ Food manufacturing
  ・ Cleaning, air conditioning, etc.

  Standard Price:	5,211,833 IDR-
  Days to Ship:	22 Day(s) or more

• 

  Combined Disc Type Steam Trap and Bypass Valve, SV1 Type

  MIYAWAKI

  [Features]
  ・ A bypass circuit is formed inside the trap with a single handle operation due to the interior of the blow valve
  ・ By omitting bypass piping, piping material costs and labor costs can be reduced. Also, the construction period can be significantly shortened
  ・ The main part of the trap (cap, disc, seat) is unitized, and the newly designed cartridge can be easily replaced, so maintenance can be performed in a very short time
  ・ The main part of the trap is designed to keep warm by using the re-evaporated steam of condensate of drainage water, so there is no blanking of the disc and it has excellent durability
  [Applications]
  ・ Ideal for cleaning equipment, food equipment, dyeing equipment, etc.

  Standard Price:	5,755,275 IDR
  Days to Ship:	13 Day(s) or more

• 

  Combined Disc Type Steam Trap and Bypass Valve, SV-N Type

  MIYAWAKI

  [Features]
  ・ A bypass circuit is formed inside the trap with a single handle operation due to the interior of the blow valve
  ・ By omitting bypass piping, piping material costs and labor costs can be reduced. Also, the construction period can be significantly shortened
  ・ The main part of the trap (cap, disc, seat) is unitized, and the newly designed cartridge can be easily replaced, so maintenance can be performed in a very short time
  ・ The main part of the trap is designed to keep warm by using the re-evaporated steam of condensate of drainage water, so there is no blanking of the disc and it has excellent durability
  ・ The automatic blow-off mechanism quickly discharges complex water in the early stages of ventilation, shortening the equipment start-up time. Also, there is almost no air obstruction during ventilation
  [Applications]
  ・ Ideal for cleaning equipment, food equipment, dyeing equipment, etc.

  Standard Price:	6,027,124 IDR-
  Days to Ship:	9 Day(s) or more

• 

  BELL-MIGHTY Steam Trap, ER105/110/116/120/25 Type

  MIYAWAKI

  [Features]
  ・ Double air-water separation (U-shaped passage of lift fitting structure and downward bucket function) ensures air-water separation, and there is no steam entrapment leakage, etc.
  ・ Since the water is discharged intermittently or continuously depending on the amount of condensed water generated, there is no accumulation of condensed water on the primary side
  ・ It is an almighty design ideal for machinery equipment
  [Applications]
  ・ Machinery/equipment
  ・ Insulation
  ・ Heating / air conditioning

  Standard Price:	21,636,333 IDR-
  Days to Ship:	22 Day(s) or more

• 

  Ball Float Steam Trap, GC1V Type

  MIYAWAKI

  [Features]
  ·Energy-saving design (orifice self-adjusting continuous discharge float type) and high-precision ground float achieve high sealing performance. Reduces steam loss.
  ·Automatic blow-off mechanism (built-in bimetal) automatically discharges air and low-temperature condensate at the beginning of ventilation.
  ·All parts, except stainless steel and bimetal, are made of stainless steel that is resistant to corrosion and has excellent durability.
  ·Compact design, few parts, easy maintenance and inspection.
  [Applications]
  ·Steam transport pipe.
  ·Steam trace etc.

  Standard Price:	8,901,833 IDR-
  Days to Ship:	22 Day(s) or more

• 

  Diaphragm Type Steam Trap, DL1 Type

  MIYAWAKI

  [Features]
  ・ Since it operates at a temperature below the saturation temperature, there is no steam leakage. Due to the operating characteristics following the saturation temperature, a wide pressure range can be used without adjustment
  ・ Quickly discharges low-temperature condensate and air at the beginning of aeration. Also functions as an air vent
  ・ It can be installed in a small space, and can be installed in both vertical and horizontal pipes. The number of parts is small and maintenance can be easily performed
  ・ The main body and essential materials are made of stainless steel and have excellent corrosion resistance
  [Applications]
  ・ Suitable for food / bio equipment, small heat exchanger / tank heating, steam main pipe / steam trace / cleaning equipment, etc.

  Standard Price:	4,945,500 IDR
  Days to Ship:	22 Day(s) or more

• 

  Diaphragm Type Steam Trap, DF1 Type

  MIYAWAKI

  [Features]
  ・ Since it operates at a temperature below the saturation temperature, there is no steam leakage. Due to the operating characteristics that follow the saturation temperature, a wide pressure range can be used without adjustment.
  ・ Quickly discharges low-temperature condensate and air at the beginning of aeration. It also functions as an air vent.
  ・ It can be installed in a small space, and can be installed in both vertical and horizontal pipes. The number of parts is small, and maintenance and inspection can be easily performed.
  [Applications]
  ·Suitable for food/bio equipment, small heat exchanger/tank heating, steam main pipe/steam tracing/cleaning equipment, etc.

  Standard Price:	4,986,667 IDR-
  Days to Ship:	22 Day(s) or more

• 

  Disc Type Steam Trap, SC31 Type

  MIYAWAKI

  [Features]
  ・ Stainless Steel: Parts other than bimetal and gasket are made of stainless steel and have excellent durability
  ・ No restrictions on mounting orientation: It can be used either vertically or horizontally
  ・ Automatic blow-off mechanism: The interior bimetal smoothly discharges low-temperature condensate and air at the beginning of ventilation
  ・ Compact design: The number of parts is small and maintenance and inspection can be performed easily
  [Applications]
  ・ Food equipment
  ・ Cleaning equipment
  ・ Steam transport pipes, small heat exchangers, etc.

  Standard Price:	6,676,333 IDR
  Days to Ship:	22 Day(s) or more

• 

  Ball Float Type Air Trap, AGC1V Type

  MIYAWAKI

  [Features]
  ・ Piping cost can be reduced because no pressure equalizing pipe is required
  ・ Vertical installation allows installation in a small space
  · Made of all stainless steel and has excellent corrosion resistance
  [Applications]
  ・ Suitable for air piping, after-cooler, receiver tank, etc.

  Standard Price:	10,385,500 IDR-
  Days to Ship:	22 Day(s) or more

• 

  Separator, H3 Type

  MIYAWAKI

  [Features]
  ·It separates and removes water droplets generated in steam pipes and condensate flowing to the bottom of pipes, and supplies high-quality dry steam.
  ·By adopting a baffle system (impingement type), the air-water separation capacity does not decrease even if the load fluctuates.
  ·The compact design makes it easy to systematize with pressure reducing valves and steam wraps.
  ·It can also be used as an air separator.
  [Applications]
  ·Steam and water separation for steam and air piping.

  Standard Price:	6,717,500 IDR
  Days to Ship:	22 Day(s) or more

• 

  Separator, H5 Type

  MIYAWAKI

  [Features]
  ·It separates and removes water droplets generated in steam pipes and condensate flowing in the bottom, and supplies high-quality dry steam.
  ·The tornado method (centrifugal separation method) is used to maintain the air-water separation ability even if the load fluctuates.
  ·The compact design makes it easy to systematize with pressure reducing valves and steam traps.
  ·It can also be used as an air separator.

  Standard Price:	6,952,434 IDR
  Days to Ship:	14 Day(s) or more

Loading...