MISUMI Locating Pins（Material：Steel Page2）

• 

  Locating Pins - Large Flat Head (Tapped)

  MISUMI

  - Locating Pins - Large Flat Head (Tapped) from MISUMI.
  - Large Flat Head with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The tolerance of the mounting part is g6.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Shouldered (Tapered Press Fit)

  MISUMI

  - Locating Pins - Shouldered (Tapered Press Fit) from MISUMI.
  - Shouldered Standard Tapered Head allows for height adjustment of the locating target.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - SUS440C or 13Cr stainless has an identification groove on D part.
  - A machining step remains on the shoulder top for Diamond Shape.
  - SUS304 may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Tip Shape Selectable (Press Fit)

  MISUMI

  - Locating Pins - Tip Shape Selectable (Press Fit) from MISUMI.
  - The tip shape is selectable from three types, Tapered (A), Taper R (B), Spherical (C). Highly customizable with each dimension configurable. Press Fit.
  - The material of pin can be selected 4 types, steel SKS3 Equivalent, S45C, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Pilot

  MISUMI

  "The pin body is secured by the bolts. Can be used even on portions where the tapped screws cannot be used, because the bolt can be tightened from the top of the insertion guide."

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	61,196 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Eccentric

  MISUMI

  Locating Pins used when the hole location differs in the mounting area and the locating area.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	97,531 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Feed Pins - Shouldered - Tapped

  MISUMI

  Locating Pins with the tapered part configurable to be longer. The Shoulder supports the workpiece so that it will not damage the base.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Feed Pins - Shouldered - Threaded

  MISUMI

  Locating Pins with the tapered part configurable to be longer. The Shoulder supports the workpiece so that it will not damage the base.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Marker Pins - Hexagon Socket Type

  MISUMI

  - Marker Pins - Hexagon Socket Type from MISUMI.
  - Hex hole enables easy mounting with a hex wrench.
  - The material of locating pin can be selected 4 types, SKS3 Equivalent, S45C Equivalent, SUS304, SUS440C or 13Cr stainless.
  - SUS304 may not be polished and may have no centering hole.
  - The pin with small thread diameter has thin under-head part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Tapped

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Tapped from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Tapped

  MISUMI

  Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Height Adjusting Pins - Press Fit

  MISUMI

  - Height Adjusting Pins - Press Fit from MISUMI.
  - Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Hard Chrome Plating products are not available in Precision Grade Tolerance.
  

  CAD ：

  2D / 3D

  Days to Ship:	2 Day(s) or more

• 

  Locating Pins - Sphere Large/Small Head (Set Screw-Notch Shape)

  MISUMI

  - Locating Pins - Sphere Large/Small Head (Set Screw-Notch Shape) from MISUMI.
  - Large Head/Small Head, Tapered, Set Screw Type. Selectable from Circumference Groove, Notched and Set Screw Flat Shapes.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - When the P dimension is small, a centering hole will cause the sphere section to become small.
  - The spherical head may be polished.
  

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Straight, Tapered (Press Fit)

  MISUMI

  - Locating Pins - Large Head, Tapered (Threaded) from MISUMI.
  - Large Head, Tapered, Press Fit + Lock Nut Shape. Improved maintainability compared to Press Fit Type.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 2 options of alteration, Wrench Hole Machining (LAC), or Wrench Flats (SC).
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Tapped)

  MISUMI

  - Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Tapped) from MISUMI.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - SUS440C or 13Cr stainless has an identification groove on D part.
  - A machining step remains on the shoulder top for Diamond Shape.
  - SUS304 may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Locating Pins for Grippers - Counterbored

  MISUMI

  [Features]Positioning pin counterbore type used for mounting an opening / closing chuck.

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  MiSUMi Economy

  Locating Pins Large Head, Round Tapered, Press Fit

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s)

• 

  Locating Pins - Large Flat Head (Threaded)

  MISUMI

  - Locating Pins - Large Flat Head (Threaded) from MISUMI.
  - Large Flat Head, Press Fit + Lock Nut Type. Improved maintainability compared to Press Fit Type.
  - Polished, Centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  - Provided 4 options of alteration, Sphere tip (RC), C Chamfered size (CN), Hex Socket Machining (RAC) or Wrench Hole Machining (LAC)
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Small Flat Head (Tapped)

  MISUMI

  Small Flat Head with the shape designed to be mounted from back using bolts. Improved maintainability compared to the press fit type.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded)

  MISUMI

  - Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded) from MISUMI.
  - The tip shape and the fixed shape of the Shouldered type are selectable from three types respectively.
  - The material of pin can be selected 4 types, steel SKS3 Equivalent, S45C, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS304 may not be polished and may have no centering hole.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - A machining step remains on the shoulder top for Diamond shape.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Height Adjusting Blocks

  MISUMI

  Seating Sensor Hole Type for confirming workpiece seating is now available.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Flanged Locating Pins - Flange Mounted

  MISUMI

  Locating Pins having the flange shaped for mount. The flange can be fixed with a screw.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Marker Pins - with Flathead Slot

  MISUMI

  - Marker Pins - with Flathead Slot, JPLB / JPLBK / JPLBM / JPLBS series from MISUMI.
  - Have the Flathead Slot provided and thus, can be mounted easily by using the screwdriver.
  - The material of marker pin can be selected 2 types, Steel S45C Equivalent, Stainless Steel SUS304.
  - SUS304 type marker pins may not be polished and may have no centering hole.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Plate Centering Pins

  MISUMI

  - Plate Centering Pins, BCMPA / CMPA / SCMPA series from MISUMI.
  - Suitable for centering thin objects.
  - Can be used for attaching gripper.
  - Center holes may disappear depending on dimension B.
  - The material of pin can be selected 2 types, steel S45C Equivalent or stainless steel SUS304.
  - SUS304 Plate Centering Pins may not be polished and may have no centering hole.
  - When the L dimension of tapped type is less than Mx4, the tapped hole or pilot hole for tapping may go through.
  

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Holders for Locating Pins - Standard

  MISUMI

  Use in combination with Locating Pins Set Screw Type or Internal Thread Type enables locating at higher position.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Holders for Locating Pins - Compact Flange

  MISUMI

  Use in combination with Locating Pins Set Screw Type or Internal Thread Type enables locating at higher position.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Small Diameter Locating Pin - Shouldered, Press Fit

  MISUMI

  - Small Diameter Locating Pin - Shouldered, Press Fit from MISUMI.
  - Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Taper R tip, Spherical tip, and Flat tip.
  - The material of locating pin can be selected 2 types, Steel SK95(SK4) Equivalent, Stainless Steel SUS304.
  - SUS304 may not be polished.
  - The hardness level of SK95 (SK4) Equivalent is 50～58HRC.
  - The outer diameter of the locating pin can be selectable up to 4 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Feed Pins - Solid - Press Fit

  MISUMI

  - Feed Pins - Solid - Press Fit from MISUMI.
  - Length of tapered part can be specified depending on applications or environment. It is installed by press-fitting.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS304 feed Pins may not be polished and may have no centering hole.
  - The outer diameter of the mounting part can be selectable from 2 mm to 10 mm.
  - The outer diameter of the feed pin tip can be selectable from 2.5 mm to 13 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Feed Pins - Solid - Tapped

  MISUMI

  - Feed Pins - Solid – Tapped from MISUMI.
  - Length of tapered part can be specified depending on applications or environment. It is attached with a female thread.
  - SUS304 feed Pins may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Feed Pins - Solid - Threaded

  MISUMI

  - Feed Pins - Solid – Threaded from MISUMI.
  - Length of tapered part can be specified depending on applications or environment. It is attached with a male thread.
  - SUS304 feed Pins may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Small Diameter Locating Pin - Shouldered, Threaded

  MISUMI

  - Small Diameter Locating Pin - Shouldered, Threaded from MISUMI.
  - Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
  - The material of pin can be selected 2 types, SK95 (SK4) Equivalent and SUS304.
  - The hardness of steel pin is 50～58HRC.
  - SUS304 may not be polished.
  - When L=0, an undercut will be added at the neck of the thread.
  - Shaft diameter can be selected up to 4 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Small Diameter Locating Pin - Small Head / Press Fit

  MISUMI

  - Small Diameter Locating Pin - Small Head / Press Fit from MISUMI.
  - Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
  - Material code SG and DG are applicable to L configurable type of sphere only.
  - L selectable type is applicable to spherical tip type only.
  - SUS304 may not be polished.
  - Chamfering of mounting portion and change of tolerance are available as alterations.
  - Shaft diameter can be configured up to 3 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Detection Pins for Weld Nuts

  MISUMI

  Weld nut detection pin. Please use it together with the workpiece detection unit (PCPNA).

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Small Head, Round Tapered - Threaded

  MISUMI

  Large Head, Tapered, with the configurable dimension for each part. The tolerances on both ends and the tapered dimensions are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Air Vent, Threaded

  MISUMI

  Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Large Flat Head - Side Locating - Press Fit

  MISUMI

  Grinding undercut shape and the pin material have been changed to give higher immunity against breaking for lateral load applications.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Locating Pins - Large Flat Head - Side Locating - Threaded

  MISUMI

  Grinding undercut shape and the pin material have been changed to give higher immunity against breaking for lateral load applications.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Locating Pins - Large Flat Head - Side Locating - Tapped

  MISUMI

  Grinding undercut shape and the pin material have been changed to give higher immunity against breaking for lateral load applications.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Locating Pins - Large Head, Bullet Nose, Compact - Press Fit

  MISUMI

  R shape at insertion guide enables smooth insertion of workpiece. Compact Type with specifiable shorter L dimension.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Large Head Tapered (Plastic Tip - Press Fit)

  MISUMI

  - Locating Pins - Large Head Tapered (Plastic Tip - Press Fit) from MISUMI.
  - Plastic material bonded to the tip of insertion guide prevents the workpiece from being scratched.
  - SUS304 locating Pins may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Locating Pins - Large Head Tapered (Plastic Tip - Threaded)

  MISUMI

  Plastic material bonded to the tip of insertion guide prevents workpiece from being scratched.

  CAD ：

  2D / 3D

  Days to Ship:	28 Day(s) or more

• 

  Locating Pins - Large Head Tapered (Plastic Tip - Tapped)

  MISUMI

  - Locating Pins - Large Head Tapered (Plastic Tip - Tapped) from MISUMI.
  - Plastic material bonded to the tip of insertion guide prevents the workpiece from being scratched.
  - SUS304 locating Pins may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	28 Day(s) or more

• 

  Locating Pins - Pilot Pins - Standard / Press Fit

  MISUMI

  [Features]It is inserted and positioned for purposes such as preventing pitch deviation. It is installed by press-fitting.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Pilot Pins - Tapped

  MISUMI

  [Features]It is inserted and positioned for purposes such as preventing pitch deviation. It is attached with a female thread.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins Double Stepped - Press Fit

  MISUMI

  [Features]Suitable for positioning workpieces with different hole diameters. It is installed by press-fitting.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Large/Small Head, Tapered (Set Screw-Circumference Groove Shape)

  MISUMI

  - Locating Pins - Large/Small Head, Tapered (Set Screw-Circumference Groove Shape) from MISUMI.
  - Large Head/Small Head, Tapered, Set Screw Type. Selectable from Circumference Groove, Notched and Set Screw Flat Shapes.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - SUS304 may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

Loading...