(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 23/2/2025 sampai dengan 6:00 pada tanggal 24/2. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 23/2 to 6:00 (WIB) 24/2/2025. We apologize for the inconvenience.
Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

MISUMI Square End Mills (HSS)（Coating：Non-Coated）

22 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less

High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

MISUMI

[Features]
·High-speed steel uncoated square regular blade length 2-flute type with up to ø50
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
R (Regular)

Standard Price:	153,811 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill, 2-Flute, Short / Non-Coated Model

MISUMI

[Features]
·High speed steel powder square uncoated short flute length 2-flute type that can expect for durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
S (Short)

Standard Price:	217,397 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

MISUMI

[Features]
·High speed steel powder square uncoated regular flute length 2-flute type that can expect for durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
R (Regular)

Standard Price:	228,144 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model

MISUMI

[Features]
·Uncoated long flute length 2-flute type of high speed steel powder square that can expect for durability
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
L (Long)

Standard Price:	255,421 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model

MISUMI

[Features]
·High speed steel powder square uncoated short flute length 4-flute type that expect for durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
S (Short)

Standard Price:	236,685 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill 4-Flute / Regular / Non-Coated Type

MISUMI

[Features]
·High speed steel powder square uncoated regular flute length 4-flute type that can expect for durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
R (Regular)

Standard Price:	244,400 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill 4-Flute / Long / Non-Coated Type

MISUMI

[Features]
·Powdered high speed steel powder square uncoated long flute length 4-flute type that can expect for durability
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
L (Long)

Standard Price:	277,465 IDR-
Days to Ship:	8 Day(s) or more

High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model

MISUMI

[Features]
·High-speed steel uncoated square short flute length 2-flute type with up to ø50
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
S (Short)

Standard Price:	133,619 IDR-
Days to Ship:	8 Day(s) or more

High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model

MISUMI

[Features]
·High-speed steel uncoated square long flute length 2-flute type with up to ø50
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
L (Long)

Standard Price:	177,475 IDR-
Days to Ship:	Same day or more

High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model

MISUMI

[Features]
·Uncoated 4-flute short blade length type
·Effective for side milling with 40° helix angle, which is stronger than standard helix angle
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
S (Short)

Standard Price:	149,065 IDR-
Days to Ship:	8 Day(s) or more

On Sale Till 31/03/2025

High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model

MISUMI

[Features]
·Uncoated 4-flute regular blade length type
·Effective for side milling with 40° helix angle, which is stronger than standard helix angle
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
R (Regular)

Standard Price:	173,863 IDR-
	Special Price
Days to Ship:	Same day or more

High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model

MISUMI

[Features]
·Uncoated 4-flute long flute length type
·Effective for side milling with 40° helix angle, which is stronger than standard helix angle
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
L (Long)

Standard Price:	195,631 IDR-
Days to Ship:	8 Day(s) or more

High-Speed Steel Corner C End Mill, 2-Flute / Short Model

MISUMI

[Features]
·High-speed steel 2-flute corner chamfer specified end mill with selectable corner chamfer in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Non-Coated

2 Flutes

S (Short)
Days to Ship: 10 Day(s) or more
High-Speed Steel Corner C End Mill, 2-Flute / Regular Model

MISUMI

[Features]
·High-speed steel 2-flute corner chamfer specified end mill with selectable corner chamfer in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Non-Coated

2 Flutes

R (Regular)
Days to Ship: 10 Day(s) or more
High-Speed Steel Corner C End Mill, 4-Flute / Short Model

MISUMI

[Features]
·High-speed steel 4-flute corner chamfer specified end mill with selectable corner chamfer in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Non-Coated

4 Flutes

S (Short)
Days to Ship: 10 Day(s) or more
High-Speed Steel Corner C End Mill, 4-Flute / Regular Model

MISUMI

[Features]
·High-speed steel 4-flute corner chamfer specified end mill with selectable corner chamfer in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Non-Coated

4 Flutes

R (Regular)
Days to Ship: 10 Day(s) or more
High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model

MISUMI

[Features]
·High-speed steel 2-flute relief shape end mill that can custom dimensions to avoid unwanted tool interference

Non-Coated

2 Flutes

S (Short)
Days to Ship: 10 Day(s) or more
High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model

MISUMI

[Features]
·High-speed steel 2-flute relief shape end mill that can custom dimensions to avoid unwanted tool interference

Non-Coated

2 Flutes

R (Regular)
Days to Ship: 10 Day(s) or more
High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model

MISUMI

[Features]
·High-speed steel 4-flute relief shape end mill that can custom dimensions to avoid unwanted tool interference

Non-Coated

4 Flutes

S (Short)
Days to Ship: 10 Day(s) or more
High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model

MISUMI

[Features]
·High-speed steel 4-flute relief shape end mill that can custom dimensions to avoid unwanted tool interference

Non-Coated

4 Flutes

R (Regular)
Days to Ship: 10 Day(s) or more
High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short

MISUMI

[Features]
·High-speed steel 2-flute square end mill short flute length type that allows cutting diameter to be specified in 0.01 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Non-Coated

2 Flutes

S (Short)
Days to Ship: 10 Day(s) or more
High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular

MISUMI

[Features]
·High-speed steel 2-flute square end mill regular flute length type that allows cutting diameter to be specified in 0.01 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Non-Coated

2 Flutes

R (Regular)
Days to Ship: 10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Machining Application
Coating
Blade shape type
Torsion Angle (θ)
Base Blade Y/N
Tool Material Type
Underneck length (ℓ1)(mm)
shank

											On Sale Till 31/03/2025
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 2-Flute, Short / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model	Powdered High-Speed Steel Square End Mill 4-Flute / Regular / Non-Coated Type	Powdered High-Speed Steel Square End Mill 4-Flute / Long / Non-Coated Type	High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model	High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model	High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model	High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model	High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model	High-Speed Steel Corner C End Mill, 2-Flute / Short Model	High-Speed Steel Corner C End Mill, 2-Flute / Regular Model	High-Speed Steel Corner C End Mill, 4-Flute / Short Model	High-Speed Steel Corner C End Mill, 4-Flute / Regular Model	High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model	High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model	High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model	High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model	High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short	High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular
Days to Ship	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	Same day or more	8 Day(s) or more	Same day or more	8 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more
Specifications	Non-Coated 2 Flutes R (Regular)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 2 Flutes L (Long)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 4 Flutes L (Long)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes L (Long)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 4 Flutes L (Long)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)
Blade diameter (D)(φ)	1 ～ 25	1 ～ 40	1 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	1 ～ 50	3 ～ 40	3 ～ 40	3 ～ 30	3 ～ 40	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	8 ～ 25	8 ～ 25	8 ～ 25	8 ～ 25	2.7 ～ 25	2.7 ～ 24.99
Blade length (ℓ)(mm)	3.5 ～ 60	2.5 ～ 65	3.5 ～ 60	15 ～ 90	8 ～ 45	12 ～ 68	15 ～ 90	2.5 ～ 75	15 ～ 110	8 ～ 65	12 ～ 68	15 ～ 110	8 ～ 50	10 ～ 60	8 ～ 45	12 ～ 68	-	-	-	-	8 ～ 50	10 ～ 60
Shank diameter (d)(mm)	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 42	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	10 ～ 25	10 ～ 25	10 ～ 25	10 ～ 25	6 ～ 25	6 ～ 25
Number of flutes(sheet)	2	2	2	2	4	4	4	2	2	4	4	4	2	2	4	4	2	2	4	4	2	2
Overall Length (L)(mm)	45 ～ 130	45 ～ 150	45 ～ 130	60 ～ 160	52 ～ 121	55 ～ 144	60 ～ 160	45 ～ 165	60 ～ 195	52 ～ 150	55 ～ 144	60 ～ 195	50 ～ 120	50 ～ 130	52 ～ 121	55 ～ 144	60 ～ 120	60 ～ 130	69 ～ 121	78 ～ 144	50 ～ 120	50 ～ 130
work material	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Machining Application	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking
Coating	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Blade shape type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Base Blade Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Tool Material Type	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.45～0.95
  - 0.45
  - 0.8
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1/2
  - 1.05
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.59
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.38
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.97
  - 3
  - 3/4
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
  - 3.97
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.76
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5/8
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.56
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.05
  - 6.1
  - 6.2
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.94
  - 7
  - 7/8
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
  - 7.94
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.53
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.11
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.7
  - 15.8
  - 15.88
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.9
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.64
  - 20.7
  - 20.8
  - 20.9
- 21～21.9
  - 21
  - 21.1
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.7
  - 21.8
  - 21.9
- 22～22.9
  - 22
  - 22.1
  - 22.2
  - 22.23
  - 22.3
  - 22.4
  - 22.5
  - 22.6
  - 22.7
  - 22.8
  - 22.9
- 23～23.9
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.7
  - 23.8
  - 23.81
  - 23.9
- 24～24.9
  - 24
  - 24.1
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.7
  - 24.8
  - 24.9
- 25～25.9
  - 25
  - 25.1
  - 25.2
  - 25.3
  - 25.4
  - 25.5
  - 25.6
  - 25.7
  - 25.8
  - 25.9
- 26～26.9
  - 26
  - 26.1
  - 26.2
  - 26.3
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
  - 26.9
- 27～27.9
  - 27
  - 27.1
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7
  - 27.8
  - 27.9
- 28～28.9
  - 28
  - 28.1
  - 28.2
  - 28.3
  - 28.4
  - 28.5
  - 28.6
  - 28.7
  - 28.8
  - 28.9
- 29～29.9
  - 29
  - 29.1
  - 29.2
  - 29.3
  - 29.4
  - 29.5
  - 29.6
  - 29.7
  - 29.8
  - 29.9
- 30～30.9
  - 30
  - 30.1
  - 30.2
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.7
  - 30.8
  - 30.9
- 31～31.9
  - 31
  - 31.1
  - 31.2
  - 31.3
  - 31.4
  - 31.5
  - 31.6
  - 31.7
  - 31.75
  - 31.8
  - 31.9
- 32～32.9
  - 32
  - 32.1
  - 32.2
  - 32.3
  - 32.4
  - 32.5
  - 32.6
  - 32.7
  - 32.8
  - 32.9
- 33～33.9
  - 33
  - 33.1
  - 33.2
  - 33.3
  - 33.4
  - 33.5
  - 33.6
  - 33.7
  - 33.8
  - 33.9
- 34～34.9
  - 34
  - 34.1
  - 34.2
  - 34.3
  - 34.4
  - 34.5
  - 34.6
  - 34.7
  - 34.8
  - 34.9
- 35～35.9
  - 35
  - 35.1
  - 35.2
  - 35.3
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
  - 35.9
- 36～36.9
  - 36
  - 36.1
  - 36.2
  - 36.3
  - 36.4
  - 36.5
  - 36.6
  - 36.7
  - 36.8
  - 36.9
- 37～37.9
  - 37
  - 37.1
  - 37.2
  - 37.3
  - 37.4
  - 37.5
  - 37.6
  - 37.7
  - 37.8
  - 37.9
- 38～38.9
  - 38
  - 38.1
  - 38.2
  - 38.3
  - 38.4
  - 38.5
  - 38.6
  - 38.7
  - 38.8
  - 38.9
- 39～39.9
  - 39
  - 39.1
  - 39.2
  - 39.3
  - 39.4
  - 39.5
  - 39.6
  - 39.7
  - 39.8
  - 39.9
- 40～40.9
  - 40
  - 40.1
  - 40.2
  - 40.3
  - 40.4
  - 40.5
  - 40.6
  - 40.7
  - 40.8
  - 40.9
- 41～41.9
  - 41
  - 41.1
  - 41.2
  - 41.3
  - 41.4
  - 41.5
  - 41.6
  - 41.7
  - 41.8
  - 41.9
- 42～42.9
  - 42
  - 42.1
  - 42.2
  - 42.3
  - 42.4
  - 42.5
  - 42.6
  - 42.7
  - 42.8
  - 42.9
- 43～43.9
  - 43
  - 43.1
  - 43.2
  - 43.3
  - 43.4
  - 43.5
  - 43.6
  - 43.7
  - 43.8
  - 43.9
- 44～44.9
  - 44
  - 44.1
  - 44.2
  - 44.3
  - 44.4
  - 44.5
  - 44.6
  - 44.7
  - 44.8
  - 44.9
- 45～45.5
  - 45
  - 45.5
- 46～46.5
  - 46
  - 46.5
- 47～47.5
  - 47
  - 47.5
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 85
- 90
- 95
- 100
[2.7-2.99/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-14.99/0.01φ Unit(s)][15.01-16/0.01φ Unit(s)][17-18.99/0.01φ Unit(s)][19.01-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]

Drawing

Clear

Blade length (ℓ)(mm)
1.1

1.6

1.8

2

2.2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

10.5

11

12

13

14

15

16

17

18

19

20

22

23

25

26

27

28

30

32

33

34

35

38

39

40

45

48

50

53

55

56

58

60

63

65

68

70

75

80

85

90

95

100

105

110

115

120

125

130

150

160

180

200

250

300
Drawing

Clear

Shank diameter (d)(mm)
4

5

BS5

6

7

8

9

10

11

12

15

16

19

20

24

25

32

42
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

6

8

10

12

14

16

18
Clear

Overall Length (L)(mm)
- 27
- 31～38
  - 31
  - 35
  - 38
- 40～48
  - 40
  - 42
  - 45
  - 46
  - 48
- 50～59
  - 50
  - 51
  - 52
  - 53
  - 54
  - 55
  - 56
  - 57
  - 58
  - 59
- 60～69
  - 60
  - 62
  - 63
  - 64
  - 65
  - 66
  - 67
  - 68
  - 69
- 70～79
  - 70
  - 72
  - 73
  - 74
  - 75
  - 76
  - 77
  - 78
  - 79
- 80～89
  - 80
  - 82
  - 83
  - 84
  - 85
  - 89
- 90～97
  - 90
  - 91
  - 92
  - 95
  - 97
- 100～108
  - 100
  - 101
  - 104
  - 105
  - 108
- 110～119
  - 110
  - 115
  - 116
  - 119
- 120～127
  - 120
  - 121
  - 122
  - 124
  - 125
  - 127
- 130～137
  - 130
  - 132
  - 134
  - 135
  - 137
- 140～149
  - 140
  - 142
  - 144
  - 145
  - 147
  - 149
- 150～155
  - 150
  - 154
  - 155
- 160～169
  - 160
  - 162
  - 165
  - 169
- 170～178
  - 170
  - 173
  - 175
  - 178
- 180～189
  - 180
  - 182
  - 183
  - 184
  - 185
  - 186
  - 188
  - 189
- 190～198
  - 190
  - 191
  - 193
  - 195
  - 198
- 200～208
  - 200
  - 202
  - 203
  - 205
  - 208
- 210～215
  - 210
  - 213
  - 215
- 220～225
  - 220
  - 222
  - 224
  - 225
- 230～235.5
  - 230
  - 233
  - 235
  - 235.5
- 240～245.5
  - 240
  - 245
  - 245.5
- 250～255
  - 250
  - 250.5
  - 253
  - 255
- 260～265
  - 260
  - 265
- 270～275
  - 270
  - 275
- 280～288
  - 280
  - 283
  - 285
  - 288
- 290～295
  - 290
  - 295
- 300
- 340～345
  - 340
  - 345
- 350
- 395
- 400
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
Details

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
- Other
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- Non-Coated
- AG
Details

Clear

Blade shape type
- Square
- For Keyway
Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15 to 25˚)
- Standard torsion (30-40°)
- Powerful Torsion (45°-60°)
- Other
Clear

Base Blade Y/N
- Available
Clear

Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- High-speed steel
- Alloy HSS
Details

Clear

Underneck length (ℓ1)(mm)
28

44

58

66
Drawing

Clear

shank
- Straight
Clear

Narrow search by specifying Manufacturer

- MISUMI (22)
- Economy series (0)
- OSG (27)
- FUKUDA (16)
- SANKO MFG (14)
- MITSUBISHI HITACHI TOOL (11)
- TAIYO-TOOL (10)
- NACHI(FUJIKOSHI) (7)
- ASAHI TOOLS (4)
- EIKOSHA (2)
- MITSUBISHI MATERIALS (1)
- ESCO (0)
- DAIICHITOOL (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Square End Mills (HSS)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

MISUMI Square End Mills (HSS)（Coating：Non-Coated）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Machining Application

Coating

Blade shape type

Torsion Angle (θ)

Base Blade Y/N

Tool Material Type

Underneck length (ℓ1)(mm)

shank

Narrow search by specifying Manufacturer

CAD

Related Categories to Square End Mills (HSS)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

MISUMI Square End Mills (HSS)（Coating：Non-Coated）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Machining Application

Coating

Blade shape type

Torsion Angle (θ)

Base Blade Y/N

Tool Material Type

Underneck length (ℓ1)(mm)

shank

Narrow search by specifying Manufacturer

CAD

Related Categories to Square End Mills (HSS)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB