(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 19/1/2025 sampai dengan 5:00 pada tanggal 20/1/2025. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 19/1/2025 to 5:00 (WIB) 20/1/2025. We apologize for the inconvenience.
Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

MISUMI Carbide Radius End Mills

Search by specifying the lower class category

56 items

: 30; 45; 60

Days to Ship	All Same day 2 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 15 Day(s) or Less 16 Day(s) or Less 17 Day(s) or Less

Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

MISUMI

[Features]
·Alteration end mill that can specify radius size of carbide end mill in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Non-Coated

General Steel
Days to Ship: 10 Day(s) or more

Days to Ship:	10 Day(s) or more

TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

MISUMI

[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
4 Flutes
B (Stub)

Standard Price:	608,226 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

MISUMI

[Features]
·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
4 Flutes
S (Short)

Standard Price:	1,012,456 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

MISUMI

[Features]
·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

B (Stub)
Days to Ship: 8 Day(s) or more
TSC series carbide long neck radius end mill, 2-flute, long neck model

MISUMI

Long neck radius that can be used as a ball and allows a large pick feed

Volume Discount

TS

General Steel

2 Flutes
Days to Ship: 8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

VAC Series Carbide 2-Flute Long Neck Radius End Mill

MISUMI

[Features]
·Effective for deep cutting due to long neck type
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Cutting edge radius also reinforced cutting edge rigid
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Standard Price:	412,427 IDR-
Days to Ship:	8 Day(s) or more

TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type

MISUMI

Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering

Volume Discount

TS
High-Hardness Steel
3 Flutes
S (Short)

Standard Price:	1,582,058 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

MISUMI

[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
4 Flutes
S (Short)

Standard Price:	1,149,365 IDR-
Days to Ship:	8 Day(s) or more

TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short

MISUMI

[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
3 Flutes
S (Short)

Standard Price:	936,394 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

MISUMI

[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling

Volume Discount

TS
High-Hardness Steel
4 Flutes
S (Short)

Standard Price:	952,186 IDR-
Days to Ship:	8 Day(s) or more

TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type

MISUMI

A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining

Volume Discount

TS
General Steel
4 Flutes
B (Stub)

Standard Price:	655,813 IDR-
Days to Ship:	8 Day(s) or more

XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

MISUMI

3-flute 45° helix radius that's resistant to chattering is available at an affordable price

Volume Discount

XAL

General Steel

3 Flutes
Days to Ship: Same day or more

Days to Ship:	Same day or more

On Sale Till 31/03/2025

XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

MISUMI

4-Flute Radius for High-Efficiency and High-Speed Machining

Volume Discount

XAL
General Steel
4 Flutes

	Special Price
Days to Ship:	Same day or more

On Sale Till 31/03/2025

(Economy series) XAL series carbide radius end mill, 2-flute / short model

MISUMI

Radius end mills are available at low prices

Volume Discount

XAL
General Steel
2 Flutes

Standard Price:	278,122 IDR-
	Special Price
Days to Ship:	Same day or more

(Economy series) XAL series carbide radius end mill, 4-flute / short model

MISUMI

The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: 8 Day(s) or more

Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

MISUMI

[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish

Volume Discount

TS
High-Hardness Steel
3 Flutes
B (Stub)

Standard Price:	971,889 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

MISUMI

[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
3 Flutes
S (Short)

Standard Price:	963,439 IDR-
Days to Ship:	8 Day(s) or more

On Sale Till 31/03/2025

TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

MISUMI

[Features]
·High rigidity is achieved by adopting negative radius and short blade length without helix angle and chattering is suppressed even at pocket corners
·Since it has back taper, it is possible to perform machining without peripheral edge hitting side when machining corners
·Even for bottom surface processing, single machine can handle from middle finish to final finish, realizing reduction in process time

Volume Discount

TS
High-Hardness Steel
4 Flutes

Standard Price:	636,185 IDR-
	Special Price
Days to Ship:	Same day or more

TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

MISUMI

Long neck type with interference prevention can be selected from a number of effective lengths

Volume Discount

TS
High-Hardness Steel
4 Flutes
S (Short)

Standard Price:	1,081,756 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

MISUMI

[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
B (Stub)

Standard Price:	716,663 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

MISUMI

Volume Discount

TS
General Steel
4 Flutes
B (Stub)

Standard Price:	681,308 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

MISUMI

[Features]
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

B (Stub)
Days to Ship: 8 Day(s) or more
TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type

MISUMI

[Features]
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

S (Short)
Days to Ship: 8 Day(s) or more
TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

MISUMI

[Features]
·Radius type of multi-function end mill
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping

Volume Discount

TS

General Steel

3 Flutes

R (Regular)
Days to Ship: 8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

MISUMI

[Features]
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Because of its high chip removal capability performance, it is possible to process at feed rate that is more than double compared to that of standard end mill
·Long shank type ideal for deep cavity milling
·For ø7 and above, shank diameter is thinner than cutting diameter to prevent interference
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Standard Price:	1,108,800 IDR-
Days to Ship:	Same day or more

TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

MISUMI

[Features]
·Radius type of multi-function end mill
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·By adopting stub blade length that is 1.5 times longer than cutting diameter, it is possible to process bottom surface while suppressing chattering

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 8 Day(s) or more
TSC series carbide radius end mill, 4-flute, 45° spiral / short model

MISUMI

[Features]
·Multi-function end mill radius type.
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: 8 Day(s) or more
TSC series carbide radius end mill, 4-flute, 45°, regular model

MISUMI

[Features]
·Radius type of multi-function end mill
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

R (Regular)
Days to Ship: 8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill, 2-flute stub model

MISUMI

[Features]
·Rigidity-oriented type designed with optimum blade length, shank length and overall length in consideration of processing using shrink fit holder
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
B (Stub)

Standard Price:	481,719 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill, 2-flute / short model

MISUMI

[Features]
·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

S (Short)
Days to Ship: 8 Day(s) or more
TSC series carbide radius end mill, 2-flute / regular model

MISUMI

[Features]
·General purpose 2-flute end mill with regular flute length type with cutting edge radius
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

R (Regular)
Days to Ship: 8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type

MISUMI

[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
B (Stub)

Standard Price:	520,594 IDR-
Days to Ship:	8 Day(s) or more

TSC Series Carbide Radius End Mill 4-Flute / Stub Type

MISUMI

[Features]
·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 8 Day(s) or more
TSC series carbide radius end mill, 4-flute / short model

MISUMI

[Features]
·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: 8 Day(s) or more
TSC series carbide radius end mill, 4-flute / regular model

MISUMI

[Features]
·Regular flute length type with cutting edge radius attached to general-purpose 4-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

R (Regular)
Days to Ship: 8 Day(s) or more
TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model

MISUMI

[Features]
·Multi-function long neck radius with high feed capability and excellent durability
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes
Days to Ship: 8 Day(s) or more
TSC series carbide long neck radius end mill, 4-flute / long neck model

MISUMI

[Features]
·Radius (R) accuracy of ±5 µm (compared to the manufacturer measurements) enables high precision deep cavity milling
·By adopting 4-flute shape, it is possible to process at high feed setting compared to 2-flute
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes
Days to Ship: 8 Day(s) or more
TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

MISUMI

[Features]
·Suppresses chattering by adopting short flute length and back taper shape on peripheral edge
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes
Days to Ship: 8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model

MISUMI

By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving

Volume Discount

TS
High-Hardness Steel
3 Flutes
B (Stub)

Standard Price:	905,970 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model

MISUMI

[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Taper neck is effective in suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
4 Flutes
B (Stub)

Standard Price:	982,030 IDR-
Days to Ship:	8 Day(s) or more

TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model

MISUMI

The high precision radius end mill for shrink fit holder achieves the high accuracy and high efficiency machining

Volume Discount

TS
High-Hardness Steel
4 Flutes
B (Stub)

Standard Price:	1,063,163 IDR-
Days to Ship:	8 Day(s) or more

TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model

MISUMI

[Features]
·High helix angle end mill with radius for machining high hardness steel
·High tool rigidity minimizes tool tilt during side milling
·Machining of high hardness steel up to 65HRC is possible
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

High-Hardness Steel

Multi-Flutes （5 ~）

B (Stub)
Days to Ship: 8 Day(s) or more

Days to Ship:	8 Day(s) or more

TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type

MISUMI

The popular radius type for stainless steel processing is also effective in preventing chipping

Volume Discount

TS
SUS
3 Flutes
S (Short)

Standard Price:	1,049,641 IDR-
Days to Ship:	8 Day(s) or more

DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

MISUMI

In addition to the standard products, the radius can be selected extensively for manufactured products

Volume Discount

DLC

Aluminum

2 Flutes

R (Regular)
Days to Ship: 8 Day(s) or more
DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

MISUMI

The radius-equipped type prevents cutter marks and also shows effectiveness in improving the surface roughness

Volume Discount

DLC

Aluminum

3 Flutes

R (Regular)
Days to Ship: 8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

													On Sale Till 31/03/2025	On Sale Till 31/03/2025				On Sale Till 31/03/2025
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model	TSC series carbide long neck radius end mill, 2-flute, long neck model	VAC Series Carbide 2-Flute Long Neck Radius End Mill	TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model	TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model	TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type	XAL series carbide radius end mill, 3-flute, 45° torsion / regular model	XAL series carbide radius end mill, 4-flute, 45° torsion / regular model	(Economy series) XAL series carbide radius end mill, 2-flute / short model	(Economy series) XAL series carbide radius end mill, 4-flute / short model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade	TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model	TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model	TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 3-flute, 45° spiral / stub model	TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type	TSC series carbide radius end mill, 3-flute, 45° spiral / regular model	TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model	TSC series carbide radius end mill, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45°, regular model	TSC series carbide radius end mill, 2-flute stub model	TSC series carbide radius end mill, 2-flute / short model	TSC series carbide radius end mill, 2-flute / regular model	TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type	TSC Series Carbide Radius End Mill 4-Flute / Stub Type	TSC series carbide radius end mill, 4-flute / short model	TSC series carbide radius end mill, 4-flute / regular model	TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model	TSC series carbide long neck radius end mill, 4-flute / long neck model	TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model	TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model	TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model	TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model	TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model	TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type	DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model	DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model
Days to Ship	10 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	Same day or more	Same day or more	Same day or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	Same day or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	Same day or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more
Specifications	Non-Coated General Steel	TS High-Hardness Steel 4 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes		TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	XAL General Steel 3 Flutes	XAL General Steel 4 Flutes	XAL General Steel 2 Flutes	XAL General Steel 4 Flutes	TS High-Hardness Steel 3 Flutes B (Stub)	TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes	TS High-Hardness Steel 4 Flutes S (Short)	TS General Steel 3 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes R (Regular)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	TS General Steel 3 Flutes	TS General Steel 4 Flutes	TS General Steel 2 Flutes	TS High-Hardness Steel 3 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes B (Stub)	TS High-Hardness Steel Multi-Flutes （5 ~） B (Stub)	TS SUS 3 Flutes S (Short)	DLC Aluminum 2 Flutes R (Regular)	DLC Aluminum 3 Flutes R (Regular)
Blade diameter (D)(φ)	2 ～ 20	2 ～ 12	2 ～ 20	1 ～ 12	0.2 ～ 6	0.4 ～ 12	4 ～ 12	4 ～ 20	4 ～ 12	4 ～ 12	2 ～ 6	0 ～ 16	3 ～ 20	1 ～ 12	3 ～ 20	2 ～ 12	2 ～ 12	3 ～ 12	4 ～ 16	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 20	3 ～ 22	3 ～ 12	3 ～ 20	3 ～ 20	2 ～ 12	1 ～ 20	1 ～ 20	2 ～ 12	1 ～ 12	1 ～ 12	1 ～ 12	1 ～ 4	1 ～ 6	0.2 ～ 3	3 ～ 12	3 ～ 12	2 ～ 6	6 ～ 12	3 ～ 12	2 ～ 12	2 ～ 12
R Size(mm)	0.1 ～ 3	0.5 ～ 2	0.5 ～ 3	0.1 ～ 3	0.05 ～ 1	0.1 ～ 1	0.813 ～ 2.438	0.813 ～ 2.607	0.813 ～ 2.438	0.813 ～ 2.438	0.2 ～ 0.5	0.2 ～ 2	0.2 ～ 3	0.1 ～ 3	0.1 ～ 3	0.5 ～ 2	0.5 ～ 2	0.75 ～ 3	1 ～ 3	0.3 ～ 1	0.3 ～ 1	0.5 ～ 1	0.3 ～ 2	0.2 ～ 2	0.2 ～ 2	0.5 ～ 1	0.2 ～ 3	0.2 ～ 3	0.2 ～ 3	0.1 ～ 3	0.1 ～ 3	0.3 ～ 1	0.1 ～ 3	0.1 ～ 3	0.1 ～ 3	0.2 ～ 1	0.05 ～ 1	0.05 ～ 0.5	0.8 ～ 2	0.8 ～ 2	0.2 ～ 0.5	0.5 ～ 2	0.5 ～ 2	0.2 ～ 1	0.2 ～ 1
Blade length (ℓ)(mm)	4 ～ 60	2 ～ 12	4 ～ 40	1.5 ～ 18	0.16 ～ 12	0.6 ～ 18	8 ～ 24	8 ～ 40	8 ～ 24	8 ～ 24	3 ～ 9	16 ～ 48	16 ～ 56	3 ～ 30	8 ～ 38	2 ～ 12	4 ～ 24	1.2 ～ 5	6 ～ 24	4.5 ～ 18	4.5 ～ 18	4.5 ～ 18	5 ～ 26	5 ～ 56	4.5 ～ 30	4.5 ～ 18	5 ～ 38	5 ～ 56	3 ～ 18	2 ～ 40	3 ～ 60	3 ～ 18	1.5 ～ 18	2 ～ 24	3 ～ 36	0.8 ～ 3.2	1.5 ～ 12	0.16 ～ 6	4.5 ～ 18	4.5 ～ 18	3 ～ 9	5 ～ 12	7 ～ 18	5 ～ 36	5 ～ 36
Number of flutes(sheet)	2 ～ 4	4	4	2	2	2	3	4	3	4	4	3	4	2 ～ 4	4	3	3	4	4	3	4	3	3	3	4	4	4	4	2	2	2	4	4	4	4	3	4	2	3	4	4	6	3	2	3
Overall Length (L)(mm)	40 ～ 125	50 ～ 100	50 ～ 130	40 ～ 75	40 ～ 100	40 ～ 100	50 ～ 100	50 ～ 150	80 ～ 160	80 ～ 160	50	60 ～ 110	60 ～ 130	40 ～ 75	50 ～ 100	50 ～ 100	50 ～ 100	60 ～ 110	70 ～ 180	40 ～ 65	40 ～ 65	60 ～ 100	60 ～ 100	60 ～ 130	80 ～ 200	60 ～ 100	60 ～ 110	60 ～ 130	35 ～ 60	40 ～ 110	45 ～ 125	35 ～ 60	40 ～ 75	40 ～ 75	45 ～ 85	45 ～ 70	40 ～ 100	40 ～ 100	80 ～ 160	80 ～ 160	50	60 ～ 85	60 ～ 100	40 ～ 80	40 ～ 80
work material	general steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○/◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]
Shank diameter (d)(mm)	4 ～ 20	4 ～ 12	4 ～ 20	4 ～ 12	4 ～ 6	4 ～ 12	6 ～ 12	6 ～ 20	6 ～ 12	6 ～ 12	6	6 ～ 16	6 ～ 16	4 ～ 12	4 ～ 20	4 ～ 12	4 ～ 12	6 ～ 12	4 ～ 16	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 20	4 ～ 12	4 ～ 20	4 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 6	4 ～ 6	4 ～ 6	6 ～ 16	6 ～ 16	6	6 ～ 12	6 ～ 12	4 ～ 12	4 ～ 12
Underneck length (ℓ1)(mm)	-	-	-	14 ～ 45	1 ～ 40	2 ～ 50	-	-	35 ～ 108	35 ～ 108	-	-	-	-	-	-	-	7.5 ～ 24	28 ～ 120	-	-	14 ～ 68	18 ～ 70	26 ～ 92	10 ～ 18	14 ～ 68	18 ～ 73	26 ～ 92	-	17 ～ 45	23 ～ 55	-	14 ～ 45	17 ～ 45	23 ～ 55	6 ～ 30	3 ～ 40	1 ～ 60	24 ～ 105	24 ～ 105	-	11 ～ 55	-	23 ～ 50	23 ～ 50
Machining Application	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts
Coating	For High Hardness (Silicon Group) / Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	DLC	DLC
Type	radius	High-Feed Radius	High-Feed Radius	radius	Long-Neck Radius	Long-Neck Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	radius	radius	radius	radius	radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	Long-Neck Radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	Long-Neck Radius	Long-Neck Radius	Tapered neck radius	Tapered neck radius	Tapered neck radius	High-Feed Radius	radius	radius	radius	radius
Torsion Angle (θ)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	-	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)
R Precision(μm)	±0.02	±0.015	±0.015	±0.01 ～ ±0.02	±0.005 ～ ±0.01	-	-	-	-	-	±0.005	±0.02	±0.02 ～ 10	±0.02	±0.02	±0.015	±0.015	±0.02	±0.015	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.005 ～ ±0.01	±0.005 ～ ±0.01	±0.005 ～ ±0.01	±0.02	±0.02	±0.005	±0.02	±0.02	±0.01 ～ ±0.02	±0.02

Configure

Specification/Dimensions

Blade diameter (D)(φ)
0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

1.2

1.4

1.5

1.6

1.8

2

2　

2.5

2.8

3

3　

3.5

4

4　

4.5

5

5　

5.5

6

6　

7

8

8　

9

10

10　

11

12

12　

13

14

16

17

18

20

22

25
Drawing

Clear

R Size(mm)
R0

0.02

0.03

0.05

0.1

0.15

0.2

0.25

0.3

0.4

0.5

0.6

0.7

0.75

0.76

0.8

0.813

0.9

1

R1

1.1

1.2

1.219

1.3

1.4

1.5

R1.5

1.6

1.625

1.7

1.8

1.9

2

R2

2.031

2.1

2.2

2.3

2.4

2.438

2.465

2.5

R2.5

2.6

2.607

2.7

2.8

2.9

3

R3

3.05

3.2

3.5

4

R4

5

R5

6

R6

6.35

6.5

8
[0.1-3/0.1mm Unit(s)]
Drawing

Clear

Blade length (ℓ)(mm)
0.08

0.13

0.15

0.16

0.2

0.24

0.25

0.28

0.3

0.32

0.4

0.48

0.5

0.55

0.56

0.6

0.64

0.65

0.7

0.72

0.75

0.8

0.9

0.96

1

1.2

1.44

1.5

1.6

1.8

2

2.1

2.2

2.25

2.3

2.4

2.5

2.7

3

3　

3.2

3.5

3.7

4

4　

4.5

4.8

5

5　

5.25

5.5

5.6

6

6　

6.75

7

7　

7.5

8

8.25

8.4

9

10

10　

10.5

11

12

12　

12.5

13

13.5

14

15

15　

16

16.5

17

17.5

18

19

19.5

20

21

22

22.5

24

25

25.5

26

27

27.5

28

30

32

33

34

35

36

37.5

38

40

42

45

48

50

55

56

60

64

75

80

100
[5-56/1mm Unit(s)]
Drawing

Clear

Number of flutes(sheet)
2

3

4

5

6

8
Drawing

Clear

Overall Length (L)(mm)
11

13

16

20

25

32

34

35

38

39

40

45

48

49

50

51

52

53

55

56

57

58

60

62

63

64

65

68

70

72

74

75

80

83

85

86

88.90

90

92

94

95

100

104

105

110

115

120

121

125

130

135

140

145

150

155

160

170

175

180

185

190

200

220

230
Drawing

Clear

work material
Details

Clear

Shank diameter (d)(mm)
3

4

5

5.8

6

7.8

8

9.8

10

11

12

13

14

15

16

17

18

20

25
Drawing

Clear

Underneck length (ℓ1)(mm)
0.20

0.5

1

1.5

1.60

1.8

2

2.4

2.5

3

3.5

3.8

4

4.5

5

6

7

7.5

8

9

10

11

12

12.35

12.5

13

14

14.35

15

16

16.65

18

19

20

21

22

24

25

26

27

28

29

30

32

32.1

32.6

33.6

34

34.6

35

35.6

36

38

39

40

41.2

42

42.2

43.2

44

44.2

45

45.2

46.5

48

50

54

55

56

60

60.3

60.8

61.3

62.3

63.3

64

64.3

65

66

70

72

75

80

80.4

81.4

82

82.4

84

85

90

92.9

95

100

102

105

108

110

120

120.6

121.6

122.6

125

140

160

160.8

-
[8-92/1mm Unit(s)]
Drawing

Clear

Machining Application
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- Dia Coat
- Non-Coated
- AlTiN
- Other
Details

Clear

Type
Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15 to 25˚)
- Standard torsion (30-40°)
- Powerful Torsion (45°-60°)
- Other
Clear

R Precision(μm)
-0.032～-0.059

-0.025～-0.047

-0.020～-0.038

-0.014～-0.028

-0.005 to 0.005

0～-20

0～-0.05

0～-0.030

0～-0.015

0～-0.01

0～+0.04

±0.005

0.005 to -0.005

0.005～-0.005

±0.01

0.01 to -0.01

0.01～-0.01

±0.015

0.015～-0.015

±0.02

0.02～-0.02

0.025～-0.025

±0.03

±0.05

10
Drawing

Clear

Narrow search by specifying Manufacturer

- MISUMI (56)
- Economy series (0)
- OSG (37)
- NS TOOL (20)
- UNION TOOL (14)
- DIJET (12)
- KYOWA SEIKO (12)
- GUHRING (11)
- NACHI(FUJIKOSHI) (11)
- SANDVIK (6)
- 7 LEADERS (4)
- OKAZAKI SEIKO (4)
- SANKO MFG (4)
- MITSUBISHI HITACHI TOOL (3)
- MAPAL (2)
- THE CUT (2)
- VAN HOORN (2)
- ATOM (1)
- KYOCERA (1)
- Poulten&Graf (1)
- TAIYO-TOOL (1)
- WATERMILLS (1)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Carbide Radius End Mills

- Radius End Mills (Carbide)
- Long Neck Radius End Mills (Carbide)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

MISUMI Carbide Radius End Mills

Search by specifying the lower class category

Configure

Specification/Dimensions

Blade diameter (D)(φ)

R Size(mm)

Blade length (ℓ)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Shank diameter (d)(mm)

Underneck length (ℓ1)(mm)

Machining Application

Coating

Type

Torsion Angle (θ)

R Precision(μm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Carbide Radius End Mills

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

MISUMI Carbide Radius End Mills

Search by specifying the lower class category

Configure

Specification/Dimensions

Blade diameter (D)(φ)

R Size(mm)

Blade length (ℓ)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Shank diameter (d)(mm)

Underneck length (ℓ1)(mm)

Machining Application

Coating

Type

Torsion Angle (θ)

R Precision(μm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Carbide Radius End Mills

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB