(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
MISUMI Carbide Square End Mills（work material：Aluminum）
Search by specifying the lower class category
Square End Mills (Carbide)
Multi-Function Square End Mills (Carbide)
High Helical End Mills (Carbide)
Roughing End Mills (Carbide)
Long Neck Square End Mills (Carbide)
| Days to Ship |
|
|---|
-
XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model
MISUMI
The new "standard" square end mill with 45° spiral is available at an ultra-low price
- Volume Discount
- XAL
- General Steel
- 3 Flutes
Standard Price: 266,138 IDR- Days to Ship: Same day or more -
XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model
MISUMI
Stub flute length items that are ideal for grooving are available at incredibly low prices
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Standard Price: 104,235 IDR- Days to Ship: 8 Day(s) or more -
XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Days to Ship: Same day or more -
(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model
MISUMI
The Misumi's unique lineup of fine flute length is available at attractive low prices
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Standard Price: 114,315 IDR- Days to Ship: Same day or more -
XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model
MISUMI
Popular sizes that support deeper side milling are available in XAL Series
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Standard Price: 252,859 IDR- Days to Ship: Same day or more -
XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model
MISUMI
The long-awaited long-neck type joins the popular XAL Series
- Volume Discount
Standard Price: 140,289 IDR- Days to Ship: 8 Day(s) or more -
XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
Popular XAL Series with the 4-flute structure that's ideal for side milling has been further reduced in price!
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Standard Price: 127,539 IDR- Days to Ship: 8 Day(s) or more -
XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model
MISUMI
A long flute length type that supports deep engraving
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Standard Price: 142,695 IDR- Days to Ship: 8 Day(s) or more -
XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model
MISUMI
The new "standard" square end mill with 45° spiral is available at an ultra-low price
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Standard Price: 255,226 IDR- Days to Ship: Same day or more -
XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
The price of the low-cost classic XAL Series has been further reduced!
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Standard Price: 111,284 IDR- Days to Ship: Same day or more -
TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model
MISUMI
[Features]
·In machining of raw material, heat-treated steel, aluminum, etc., pocket standing wall finishing of mold base (main mold), etc., demonstrate strength, thanks to positive rake angle, sharp corners of bottom edge, and 53° strong helix angle
·High tool rigidity minimizes tool tilt during side milling- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- S (Short)
Days to Ship: 8 Day(s) or more -
TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model
MISUMI
[Features]
·In machining of raw material, heat-treated steel, aluminum, etc., pocket standing wall finishing of mold base (main mold), etc., demonstrate strength, thanks to positive rake angle, sharp corners of bottom edge, and 53° strong helix angle
·High tool rigidity minimizes tool tilt during side milling- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- R (Regular)
Days to Ship: 8 Day(s) or more -
MISUMI
Ideal for the standing-wall finish of stainless steel
- Volume Discount
- TS
- SUS
- 3 Flutes
- R (Regular)
Standard Price: 1,100,464 IDR- Days to Ship: 8 Day(s) or more -
Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model
MISUMI
Achieves the standing-wall machining of aluminum in the first shot! flute length of 5 Times the Blade Diameter
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- EXL (Extra Long)
Standard Price: 561,160 IDR- Days to Ship: 8 Day(s) or more -
TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Days to Ship: Same day or more -
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- L (Long)
Days to Ship: Same day or more -
Carbide square end mill, 2-flute / 3D Flute Length (regular) model
MISUMI
The 3D flute length type that produces high-quality finish supports a wide range of machining areas
- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
- R (Regular)
Days to Ship: 8 Day(s) or more -
TSC series carbide long neck square end mill, 2-flute / long neck model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Can select optimal body length for processing deep parts of workpiece
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 2 Flutes
Days to Ship: Same day or more -
TSC series carbide roughing end mill, fine pitch / long model
MISUMI
[Features]
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- L (Long)
Days to Ship: 8 Day(s) or more -
TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model
MISUMI
[Features]
·High-speed rotation processing is possible by adopting 45° helix angle
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·Long shank type ideal for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- R (Regular)
Days to Ship: 8 Day(s) or more -
DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model
MISUMI
Given the rounded edge on the blade rear end, it suppresses machining streaks
- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- B (Stub)
Standard Price: 848,733 IDR- Days to Ship: 8 Day(s) or more -
Carbide Long Neck Square End Mill for Aluminum Machining, 2-Flute / Long Neck Model
MISUMI
DLC coated long neck square with both sharpness and durability
- Volume Discount
- DLC
- Aluminum
- 2 Flutes
Days to Ship: 8 Day(s) or more -
Carbide Square End Mill for Resin Machining, 2-Flute / Regular Model
MISUMI
The cutting edge with an emphasis on sharpness is ideal for resin machining
- Volume Discount
- Non-Coated
- Resin
- 2 Flutes
- R (Regular)
Standard Price: 240,737 IDR- Days to Ship: 8 Day(s) or more -
XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length Model
MISUMI
The Misumi's unique lineup of fine flute length is available at attractive low prices
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Standard Price: 115,336 IDR- Days to Ship: 8 Day(s) or more -
XAC series carbide square end mill, 2-flute / short model
MISUMI
[Specification]
·Standard TiAlN coating- Volume Discount
- TiAlN
- General Steel
- 2 Flutes
- S (Short)
Standard Price: 161,820 IDR- Days to Ship: 8 Day(s) or more -
XAC series carbide square end mill, 4-flute / short model
MISUMI
[Specification]
·Standard TiAlN coating- Volume Discount
- TiAlN
- General Steel
- 4 Flutes
- S (Short)
Standard Price: 187,617 IDR- Days to Ship: Same day or more -
XAC series carbide square end mill, 4-flute / long model
MISUMI
User friendly TiAlN coated series with long flute length
- Volume Discount
- TiAlN
- General Steel
- 4 Flutes
- L (Long)
Standard Price: 312,155 IDR- Days to Ship: 8 Day(s) or more -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Days to Ship: 8 Day(s) or more -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Days to Ship: Same day or more -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·This product has an intermediate flute length between TSC-HEM3S (short flute length) and TSC-HEM3R (regular flute length), so it is called "SR flute length."
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 3 Flutes
- SR
Days to Ship: 8 Day(s) or more -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Days to Ship: 8 Day(s) or more -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- L (Long)
Days to Ship: 8 Day(s) or more -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface (product in Fig. 3 only)
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Standard Price: 868,785 IDR- Days to Ship: 8 Day(s) or more -
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Days to Ship: 8 Day(s) or more -
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·This product has an intermediate flute length between TSC-HEM4S (short flute length) and TSC-HEM4R (regular flute length), so it is called "SR flute length."
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- SR
Days to Ship: 8 Day(s) or more -
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Days to Ship: Same day or more -
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Due to the unique chip gullet shape, groove cutting can be performed with a cutting depth comparable to that of a 2-flute.
·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface. (product in Fig. 3 only)
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Standard Price: 757,229 IDR- Days to Ship: Same day or more -
TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Tool rigidity is emphasized by shortening the flute length and overall length for shrink fit
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Standard Price: 179,165 IDR- Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Suitable for high-speed machining with stub flute length that is 1.5 times the cutting diameter
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Standard Price: 179,165 IDR- Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General-purpose 2-flute end mill for a wide range of applications
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 2-flute / 2.5D Flute Length model
MISUMI
The lineup of fine intermediate flute length between short and regular is available only in Misumi
- Volume Discount
- TS
- General Steel
- 2 Flutes
- SR
Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
2-flute regular size that can be used for a wide range of applications
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- R (Regular)
Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 2-flute / 3.5D Flute Length model
MISUMI
Lineups of fine intermediate flute length between regular and long are available only in MISUMI.
- Volume Discount
- TS
- General Steel
- 2 Flutes
- RL
Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Flute length 4D type supports deep cavity milling
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- L (Long)
Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill for shrinkage fitting, 4-flute / 1D Flute Length (stub) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Tool rigidity is emphasized by shortening the flute length and overall length for shrink fit
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Standard Price: 234,943 IDR- Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model | XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model | XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model | (Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model | XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model | XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model | XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model | XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model | XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model | XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model | TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model | TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model | Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model | TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model | Carbide square end mill, 2-flute / 3D Flute Length (regular) model | TSC series carbide long neck square end mill, 2-flute / long neck model | TSC series carbide roughing end mill, fine pitch / long model | TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model | DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model | Carbide Long Neck Square End Mill for Aluminum Machining, 2-Flute / Long Neck Model | Carbide Square End Mill for Resin Machining, 2-Flute / Regular Model | XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length Model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model | TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model | TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model | TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model | TSC series carbide square end mill, 2-flute / 2.5D Flute Length model | TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model | TSC series carbide square end mill, 2-flute / 3.5D Flute Length model | TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model | TSC series carbide square end mill for shrinkage fitting, 4-flute / 1D Flute Length (stub) model | ||||
| Days to Ship | Same day or more | 8 Day(s) or more | Same day or more | Same day or more | Same day or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | Same day or more | Same day or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | Same day or more | Same day or more | 8 Day(s) or more | Same day or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | Same day or more | 8 Day(s) or more | 8 Day(s) or more | Same day or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | Same day or more | Same day or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Blade diameter (D)(φ) | 1 ～ 12 | 0.5 ～ 20 | 1 ～ 20 | 0.1 ～ 20 | 1 ～ 12 | 0.1 ～ 6 | 1 ～ 20 | 0.5 ～ 12 | 2 ～ 20 | 0.1 ～ 20 | 1 ～ 12 | 1 ～ 20 | 3 ～ 12 | 3 ～ 12 | 1 ～ 20 | 2 ～ 20 | 0.2 ～ 12 | 0.1 ～ 6 | 6 ～ 20 | 6 ～ 20 | 5 ～ 22 | 0.5 ～ 6 | 0.3 ～ 16 | 1 ～ 12 | 1 ～ 20 | 2 ～ 20 | 3 ～ 12 | 1 ～ 12 | 1 ～ 20 | 3 ～ 16 | 1 ～ 20 | 2 ～ 20 | 2 ～ 20 | 1 ～ 16 | 3 ～ 16 | 1 ～ 20 | 2 ～ 22 | 0.5 ～ 12 | 0.5 ～ 20 | 0.1 ～ 20 | 0.5 ～ 12 | 0.2 ～ 20 | 0.5 ～ 12 | 1 ～ 12 | 2 ～ 12 |
| Blade length (ℓ)(mm) | 1.5 ～ 26 | 0.75 ～ 30 | 3 ～ 60 | 0.3 ～ 60 | 4 ～ 48 | 0.2 ～ 9 | 2 ～ 40 | 2 ～ 48 | 5 ～ 38 | 0.2 ～ 40 | 2 ～ 24 | 2.5 ～ 45 | 10.5 ～ 38 | 15 ～ 60 | 3 ～ 38 | 5 ～ 75 | 0.6 ～ 36 | 0.2 ～ 10 | 25 ～ 65 | 15 ～ 45 | 9 ～ 33 | 1 ～ 12 | 0.9 ～ 48 | 2.5 ～ 30 | 2.5 ～ 38 | 6 ～ 38 | 12 ～ 30 | 1.5 ～ 18 | 3 ～ 38 | 5 ～ 40 | 4 ～ 56 | 5 ～ 75 | 3.5 ～ 30 | 1.5 ～ 24 | 5 ～ 40 | 4 ～ 56 | 3.5 ～ 30 | 0.5 ～ 12 | 0.75 ～ 30 | 0.2 ～ 40 | 1.25 ～ 30 | 0.6 ～ 60 | 1.75 ～ 42 | 4 ～ 48 | 2 ～ 12 |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | 0.3 ～ 60 | - | - | - | - | 17 ～ 70 | 20 ～ 92 | - | - | 18 ～ 72 | 30 ～ 112 | 23 ～ 55 | 0.3 ～ 60 | 30 ～ 112 | 20 ～ 95 | - | 4 ～ 40 | - | - | - | - | - | 14 ～ 68 | 18 ～ 73 | 22 ～ 78 | 26 ～ 92 | 30 ～ 112 | 30 ～ 140 | 14 ～ 74 | 22 ～ 78 | 26 ～ 92 | 30 ～ 140 | - | - | 17 ～ 73 | 20 ～ 55 | 23 ～ 92 | 26 ～ 65 | 29 ～ 76 | - |
| Shank diameter (d)(mm) | 4 ～ 12 | 4 ～ 20 | 4 ～ 20 | 3 ～ 20 | 4 ～ 12 | 4 ～ 6 | 4 ～ 20 | 4 ～ 12 | 4 ～ 20 | 3 ～ 20 | 6 ～ 12 | 6 ～ 20 | 6 ～ 12 | 6 ～ 12 | 4 ～ 20 | 6 ～ 20 | 3 ～ 12 | 4 ～ 6 | 6 ～ 20 | 6 ～ 20 | 4 ～ 20 | 4 ～ 6 | 3 ～ 16 | 4 ～ 12 | 4 ～ 20 | 4 ～ 20 | 6 ～ 12 | 6 ～ 12 | 4 ～ 20 | 6 ～ 16 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 16 | 6 ～ 16 | 6 ～ 20 | 6 ～ 20 | 4 ～ 12 | 4 ～ 20 | 3 ～ 20 | 4 ～ 12 | 3 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 |
| Number of flutes(sheet) | 3 | 2 | 4 | 2 | 4 | 2 | 4 | 2 | 4 | 2 | 4 ～ 6 | 4 ～ 6 | 3 | 2 | 4 | 4 | 2 | 2 | 4 | 3 ～ 4 | 3 | 2 | 2 | 2 | 2 | 4 | 4 | 3 | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 |
| Overall Length (L)(mm) | 45 ～ 100 | 40 ～ 110 | 45 ～ 130 | 40 ～ 110 | 45 ～ 100 | 50 ～ 100 | 40 ～ 110 | 45 ～ 100 | 45 ～ 125 | 40 ～ 110 | 60 ～ 100 | 60 ～ 130 | 60 ～ 100 | 60 ～ 130 | 60 ～ 110 | 60 ～ 150 | 40 ～ 85 | 40 ～ 100 | 100 ～ 150 | 100 ～ 150 | 80 ～ 200 | 40 ～ 110 | 45 ～ 110 | 45 ～ 85 | 40 ～ 105 | 40 ～ 105 | 50 ～ 90 | 60 ～ 100 | 60 ～ 110 | 60 ～ 110 | 60 ～ 130 | 60 ～ 150 | 80 ～ 200 | 60 ～ 110 | 60 ～ 110 | 60 ～ 130 | 80 ～ 200 | 40 ～ 65 | 40 ～ 105 | 35 ～ 110 | 45 ～ 85 | 40 ～ 130 | 45 ～ 95 | 45 ～ 100 | 40 ～ 65 |
| work material | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] |
| Torsion Angle (θ) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) / Powerful Torsion (45°-60°) | Weak torsion (15 to 25˚) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Machining Application | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts |
| Coating | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | DLC | DLC | Non-Coated | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) |
| Blade tip shape | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | Sharp Edge / With Lead | Sharp Edge | Sharp Edge | C plane | Sharp Edge | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Micro R | C plane | Micro R | Sharp Edge | Sharp Edge | Sharp Edge / With Lead | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead |
| Type | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square | High Helical | High Helical | Square | Square | Square | Square | Square | Long-Neck Square | Roughing | Roughing | Square | Long-Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6H
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8H
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10H
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12H
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12
-
12～12.9
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.8
-
14～14.8
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.7
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.7
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.6
- 47
- 47.2
- 47.5
- 47.6
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57～57.5
- 57
- 57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60
-
62
-
63
-
64
-
65
-
66
-
67
-
70
-
72
-
75
-
76
-
78
-
80
-
82
-
83
-
85
-
90
-
100
-
103
-
110
-
115
-
120
-
125
-
130
-
150
-
200
[4-75/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Torsion Angle (θ)
-
Machining Application
-
Coating
-
Blade tip shape
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
Narrow search by specifying Manufacturer
-
- MISUMI (122)
- NS TOOL (74)
- OSG (67)
- OKAZAKI SEIKO (35)
- MITSUBISHI HITACHI TOOL (24)
- ASAHI TOOLS (19)
- DIJET (16)
- KYOCERA (16)
- NACHI(FUJIKOSHI) (15)
- UNION TOOL (14)
- 7 LEADERS (12)
- SANDVIK (7)
- EIKOSHA (6)
- KYOWA SEIKO (6)
- TOYO DRILL (5)
- ATOM (5)
- THE CUT (5)
- SANKO MFG (4)
- SUMITOMO ELECTRIC HARDMETAL (4)
- GUHRING (3)
- WIDIN (3)
- GCT (1)
- OMIKOGYO (1)
- Poulten&Graf (1)
- MITSUBISHI MATERIALS (0)
- PROCHI (0)
- ISCAR (0)
- TAIYO-TOOL (0)
- VAN HOORN (0)
- MAPAL (0)
CAD
-
- 2D
- 3D
Related Categories to Carbide Square End Mills
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy