LOBTEX Diamond Cutters

• 

  PVC Diamond Cutter (Dry)

  LOBTEX

  [Features]
  · Cutting, chamfering, and surface finishing of PVC pipes.
  · For cutting asbestos dual-layer pipe, cross-linked polyethylene pipe, void pipe, cast iron pipe, drainage mass adjuster kitchen panels.
  · Superb sharpness with small to large bore pipes, leaving no flashes or burrs.

  Standard Price:	986,559 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Wheel New Laser (Dry) Long Life

  LOBTEX

  [Features]
  ·For cutting hard concrete, secondary concrete products, stone, ALC, mortar, bricks, etc.
  ·Thorough pursuit of "sharpness, long life and safety"! Achieves the best performance.
  ·Ideal for difficult-to-cut materials such as hard concrete, reinforced concrete, and stone. (Of course, mortar blocks are also OK)
  ·"Hardened high-strength substrate" + "laser welding" make harsh work safer.
  ·The 255-355 uses a hardened laminated substrate to cut sensory noise by 70%.
  ·Friendly to workers and the environment, ideal for nighttime construction and residential areas.

  Standard Price:	1,120,850 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Wheel U Cutter (Dry Type) / U Cutter Light (Dry Type)

  LOBTEX

  [Features]
  · Ideal for repairing cracks in concrete and mortar.
  · Since the grinding cross section is an ideal U shape, caulking materials easily fill grooves, and large adhesive surfaces ensure secure renovation work involving repairing of cracks that occur on concrete or mortar of wall surfaces and roof tops, etc., or for implementing joints.
  · Every nook of the most complicated cracks in walls can be cut as needed without damaging other areas.
  · The UK is a cost performance-focused type.

  Standard Price:	2,709,004 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Wheel V Cutter (Dry Type) / V Cutter Light (Dry Type)

  LOBTEX

  [Features]
  · Ideal for repairing cracks in concrete and mortar.
  · Because the tip is tapered in a V shape, it is easy to cut into cracks, and even with complicated cracks it is possible to easily cut every corner of the wall without extra damage, so remodeling work can be drastically shortened.
  · The VK is a cost performance-focused type.

  Standard Price:	2,414,814 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Wheel Wave Laser (Dry Type)

  LOBTEX

  [Features]
  · First in the Japanese market. For laser welding of wavy tips.
  · Sharpness for hard concrete is top level.
  · The cutting speed is raised with sharp cutting quality for both the engine cutter and electric cutter.
  · Wavy tip shape creates smoother grip for a superior finish of cut surfaces.
  · Hardened substrate + laser welding minimizes substrate distortion from heat of cutting, and prevents dislodged chips to ensure smooth cutting work.

  Standard Price:	1,689,841 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Wheel Sky Wave Extra (Dry Type)

  LOBTEX

  [Features]
  · For cutting concrete, tiles, roof tiles, new construction materials, incompatible materials, blocks, slate, mortar, bricks, etc.
  · Cutting speed has been increased by 15% (relative to manufacturer's conventional products).
  · Beautiful cut with less vibration.
  · It has a sharp cut and long life.
  · The unique, continued slanted wave (inclined) shape quickly discharges chips and maintains a sharp and clean finish

  Standard Price:	1,218,645 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Wheel Sky Wave Extra (Dry Type / Flange Type)

  LOBTEX

  For cutting concrete, mortar, blocks, tiles, roof tiles, new construction materials, incompatible materials, bricks, etc. The flange of the power tool does not contact the work surface, allowing the corner between the wall and floor to be cut, achieving a quick and beautiful finish.
  
  [Features]
  · Can be used for corner cutting, adjusting the cut of uneven surfaces, cutting off raised pipes, as well as normal cutting.
  · Easy installation without using a wrench.

  Standard Price:	1,305,991 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Wheel Tile-Kun (Dry Type)

  LOBTEX

  [Features]
  · For cutting porcelain tiles, stoneware tiles, and ceramic tiles.
  · The continued slanted wave shape quickly discharges chips.
  · Thin blade for neat cuts and clean finish

  Standard Price:	798,569 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Wheel Gritting (Dry Type)

  LOBTEX

  A diamond cutter that protects the substrate from wear with a protective tip.
  [Features]
  ·Newly developed bond with the best sharpness.
  ·Long tool life with 10 mm tip height.
  ·Laminated substrates provide high rigidity and excellent straightness.
  [Applications]
  ·Ideal for cutting hard concrete, secondary concrete products, hard porcelain tiles, and bricks.
  ·Ideal for cutting stone (granite), blocks, slates, roof tiles, etc.

  Standard Price:	890,863 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Wheel Rim Type (Dry Type / Wet Type)

  LOBTEX

  [Features]
  · For cutting tiles, roofing tiles, concrete, blocks, thin steel plates (0.5 mm or less) etc.
  · R (integrated type)

  Standard Price:	959,877 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Wheel Laser (Dry Type)

  LOBTEX

  [Features]
  · For cutting concrete, secondary concrete products, block, slate, ALC, stone, etc.
  · Since this product maintains its strength even at high temperatures, it allows for safe work by reducing the amount of chipping that flies off during the extreme heat produced by difficult-to-cut machining.
  · As it bonds instantaneously, it causes little thermal effects on the tip and substrates. It fully utilizes the sharpness of diamond abrasive grains and shows outstanding sharpness

  Standard Price:	1,687,554 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Diamond Wheel Laser Corner Cutter (Dry Type)

  LOBTEX

  [Features]
  · For corner cutting and cutting concrete, blocks, etc.
  · The offset shape prevents the flange of power tools from making contact, enabling the corner between the wall of concrete blocks and floor surface to be cut, achieving a quick and beautiful finish.

  Standard Price:	1,574,777 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Wheel Laser Blade (Dry Type)

  LOBTEX

  [Features]
  · Value type with an emphasis on economy.
  · Laser welding.
  · For hand type engine cutters.
  · For cutting and disassembling concrete, secondary concrete products, block, slate, ALC, stone, etc.
  · The tips have been safely bonded by laser welding.
  · Outstanding cutting quality too

  Standard Price:	2,331,000 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Diamond Wheel Tile Cutter Hard Compatible (Dry Type)

  LOBTEX

  [Features]
  · For cutting hard roof tiles and cement roof tiles etc., such as Sanshu tiles, Sekishu tiles, Yamato tiles etc.
  · The continued slanted wave shape quickly discharges chips.
  · The holes on the base plate increase the air flow, thus improving the air cooling effect

  Standard Price:	1,071,181 IDR
  Days to Ship:	8 Day(s) or more

• 

  Diamond Wheel Sword TRX (Dry Type)

  LOBTEX

  [Features]
  · For cutting concrete products, blocks, slate, mortar, bricks, roof tiles, tiles, etc.
  · Increased cutting speed.
  · Light sharpness and excellent cost performance.

  Standard Price:	938,462 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Wheel Kittaro (Dry Type)

  LOBTEX

  Pricing and performance are a cut above. New series of diamond cutters.
  [Features]
  · This price for the LOBSTER brand.
  · Good cost performance with excellent cutting quality.
  [Applications]
  · Optimal for cutting all types of concrete products, blocks, slate, mortar, bricks, roof tiles, tiles, etc.

  Standard Price:	323,100 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Wheel Cutting King WA/SA (Dry Type)

  LOBTEX

  A diamond cutter with convincing "cost performance" and substantial "variations".
  [Features]
  ·WA (wave type) gives a more beautiful finish.
  ·SA (segment type) gives priority to sharpness and speed.
  [Applications]
  ·Ideal for cutting general concrete products, blocks, slates, mortar, bricks, roof tiles, tiles, etc.

  • STOCK

  Standard Price:	570,944 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Diamond Blade for Public Works (Wet Type)

  LOBTEX

  [Features]
  ·Diamond civil engineering blades are high-quality blades that are suitable for wet use by attaching to concrete cutters, etc., and can be widely used for cutting asphalt, concrete roads, blocks, bricks, and other building structures.

  Standard Price:	4,163,241 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Wheel with Electrodeposition (for Ceramic Siding Only)

  LOBTEX

  [Features]
  · Unique electrodeposition method achieves gapless electrodeposition of diamond particles for a smooth cut.
  · An extremely thin type with little cutting resistance and greatly improved operability.
  · Further reduces dust and improves the working environment.
  · Multi-segment type with excellent heat dissipation to enable continuous cutting.
  · For dedicated ceramics use, but can be used to cut the following materials.
  · Hard and brittle materials such as marble and slate, and resin materials such as FRP, CFRP, polyester resin, phenol resin, melamine resin, epoxy resin and hard PVC

  Standard Price:	1,331,865 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Cutter Wheel (Dry Type) Single Cup

  LOBTEX

  Diamond cup wheel has a high density of diamond abrasive grains and demonstrates excellent workability during chamfering, such as grinding concrete blocks, bricks, tiles, stones, and refractory furnace materials for various construction work.

  Standard Price:	1,574,578 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Cutter Wheel (Dry Type) Offset Type

  LOBTEX

  Diamond cup wheel has a high density of diamond abrasive grains and demonstrates excellent workability during chamfering, such as grinding concrete blocks, bricks, tiles, stones, and refractory furnace materials for various construction work.
  
  [Features]
  · For sanders (with window).
  · Ideal for finishing stone, concrete, and various building materials, as well as grinding and correction of uneven surfaces. (Used in planing tools for dust proofing.)

  Standard Price:	5,824,574 IDR
  Days to Ship:	8 Day(s) or more

• 

  Diamond Cutter Wheel (Dry Type) Double Cup

  LOBTEX

  Diamond cup wheel has a high density of diamond abrasive grains and demonstrates excellent workability during chamfering, such as grinding concrete blocks, bricks, tiles, stones, and refractory furnace materials for various construction work.
  
  [Features]
  · High class product having excellent balance of sharpness and life.
  · For stone, concrete, block and refractory brick

  Standard Price:	1,820,674 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Wheel Laser SL (Dry Type)

  LOBTEX

  [Features]
  · Because high strength is maintained even at high temperatures, work can be performed safely with minimal chip scatter.
  · Demonstrates excellent cutting quality with instant bonding that fully retains the diamond granule cutting quality.
  [Applications]
  · For cutting concrete, secondary concrete products (e.g., U-shaped grooves), block, slate, ALC, stone, etc.

  Standard Price:	7,184,286 IDR
  Days to Ship:	12 Day(s)

• 

  Diamond Wheel New Laser (Dry Type)

  LOBTEX

  [Features]
  · Further increases the performance of conventional products and pursues a high cost performance.
  · SL255A and above use a noise reduction baseplate.
  · Further pursues cutting quality + long life and safety.
  [Applications]
  · For cutting hard concrete and secondary concrete products, stone materials, ALC, mortar, bricks, etc.

  Standard Price:	7,816,000 IDR
  Days to Ship:	12 Day(s)

• 

  Brazing Diamond Saw Blade(Dry)

  LOBTEX

  Standard Price:	5,310,769 IDR
  Days to Ship:	12 Day(s)

• 

  Diamond Saw Blades Laser Welded Segments (Dry)

  LOBTEX

  Standard Price:	6,821,538 IDR-
  Days to Ship:	12 Day(s)

Loading...