KTC(KYOTO TOOL) Vehicle Maintenance Tools（Page2）

• 

  19.0 Sq. Head Bolt Flywheel Wrench Set

  KTC(KYOTO TOOL)

  [Applications]
  ·Dedicated wrench used to attach and detach engine cylinder head bolts and flywheel bolts

  Standard Price:	2,615,649 IDR
  Days to Ship:	8 Day(s)

• 

  9.5 Sq. Triple Square Bit Socket

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated bit used for triple square bolts with socket heads used in European vehicles. These bolts are used commonly in the drive shaft flanges and undercarriage of Volkswagen and Audi vehicles, etc.
  · The end bit is replaceable.

  Standard Price:	342,654 IDR
  Days to Ship:	8 Day(s)

• 

  Carburetor Screwdriver Set

  KTC(KYOTO TOOL)

  · Screwdrivers for making adjustments.

  Standard Price:	585,926 IDR
  Days to Ship:	8 Day(s)

• 

  Carburetor Screwdriver (Flat)

  KTC(KYOTO TOOL)

  · Screwdrivers for making adjustments.

  Standard Price:	279,968 IDR
  Days to Ship:	30 Day(s)

• 

  Oil Pan Seal Cutter

  KTC(KYOTO TOOL)

  [Applications]
  · Use to cut sealing packing when removing oil pans.
  [Features]
  · Arc-shaped cutter can be driven into the seal section.
  · The side cutter has a sharp angle and fits well against the base when driven in from the side, enabling movement.
  · The cutter shape, large striking edge and removable handle enable work to be performed safely.
  · Remove handle to work in confined places and remove oil pans easily.

  Standard Price:	937,132 IDR
  Days to Ship:	8 Day(s)

• 

  Engine Mechanical Hanger Compatible With Impact Absorbing Body

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for holding automotive engine.
  [Scope]
  · Compatible with engines for FF lightweight to ordinary vehicles.
  　(Excluding vehicles that does not have fender, strut tower or front support installation bolt, trucks and minivans)
  · Maximum usage load: 2,450 N (250 kgf) or less
  [Features]
  · Compatible with impact absorbing bodies commonly adopted in recent vehicles.
  · This tool can be set stably and parallel to the ground even if the fender is inclined or tilted downward.
  · Compatible with models having short fender ribs that are not supported with conventional parts, or models in which tools cannot be set between fenders.
  · Vehicle can be moved or lifted up and down while the engine is held.
  · Because the bridge can be set in an inclined state, the hanger can be used with the bridge shifted from above the belt when replacing the belt, etc.
  · Utilizes backward type winch. Drive section can be switched between left and right and moved to the desired position.
  · Winch can be operated remotely with a chain wheel even while the vehicle is lifted up.

  Standard Price:	12,644,070 IDR
  Days to Ship:	8 Day(s)

• 

  12.7 Sq. Drain Plug Socket

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for tightening and loosening mission and differential drain (filler) plugs used in Nissan and Subaru vehicles.
  [Scope]
  · Mainly for Nissan FF manual transmission vehicles (AC301-10)
  · Mainly for Nissan manual transmission, rear differential, Subaru 4WD vehicle rear differential (AC301-13)
  · Mainly for older Nissan FR manual transmission vehicles (AC301-17)
  [Features]
  · Adopted 12.7 sq. to support drain plugs tightened with a large torque.
  · Main body has a hexagon shape that can be used with a 24 mm offset wrench, etc.

  Standard Price:	181,372 IDR-
  Days to Ship:	8 Day(s) or more

• 

  12.7 Sq. Drain Plug Socket Set (3 Pc Set)

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for tightening and loosening mission and differential drain (filler) plugs used in Nissan and Subaru vehicles.
  [Scope]
  · Mainly for Nissan FF manual transmission vehicles (AC301-10)
  · Mainly for Nissan manual transmission, rear differential, Subaru 4WD vehicle rear differential (AC301-13)
  · Mainly for older Nissan FR manual transmission vehicles (AC301-17)
  [Features]
  · Adopted 12.7 sq. to support drain plugs tightened with a large torque.
  · Main body has a hexagon shape that can be used with a 24 mm offset wrench, etc.

  Standard Price:	561,560 IDR
  Days to Ship:	8 Day(s)

• 

  9.5 12.7 Sq. New Flex Extension Wrench

  KTC(KYOTO TOOL)

  [Features]
  · Has a 9.5 sq. swivel type tip.
  · Rotates smoothly within 40°.
  · [Applications]
  · Removing and installing clutch housing bolts.

  Standard Price:	1,283,025 IDR
  Days to Ship:	8 Day(s)

• 

  Pilot Bearing Bushing Puller

  KTC(KYOTO TOOL)

  [Applications]
  · Removing pilot bearing bushing on flywheels.
  [Features]
  · Compact, lightweight and easy to use. Improves workability.
  · Claws engage well and can be used for maintenance on vehicles.
  · Suitable for a wide variety of models.

  Standard Price:	1,927,968 IDR
  Days to Ship:	8 Day(s)

• 

  Snap Ring Pliers For Hub

  KTC(KYOTO TOOL)

  [Applications]
  · Mounting and removing snap rings used in the vehicle hub.
  [Scope]
  · Range of snap ring plier tip opening (minimum 10 mm to maximum 36 mm)
  [Features]
  · Features a step-less automatic locking mechanism. Can be locked at the desired position.
  · Just open the grip to unlock.
  · Easily replace only the claws.
  · Compatible with snap rings with holes, and types with notches on the inner side of the ring (Toyota).

  Standard Price:	1,089,048 IDR
  Days to Ship:	8 Day(s)

• 

  Tie Rod End Separator (Offset Type)

  KTC(KYOTO TOOL)

  [Applications]
  · Separation of tie rod end.
  [Features]
  · Tough design for increased power.
  · Rated output is set to 15 kN (1.5 t) and maximum output is set to 30 kN (3 t).
  · Supports a larger output compared to conventional part (KTC BJU-1945).
  · Highly durable design.
  · The offset shape increases durability.
  · Fits various models perfectly.
  · Range of opening: 16 mm to 50 mm
  · Suitable for tie rod ends used in mini cars to 3 L class automobiles.
  · Easy operation increases efficiency.
  · Mount and remove just by operating the thrust bolt.
  · Perform work easily with drive tools.
  · Adopted a 9.5 sq. square drive. Can hold reaction force with drive tools.
  · Comes with a "drop-prevention lanyard" for safety.

  • STOCK

  Standard Price:	2,121,517 IDR
  Days to Ship:	8 Day(s)

• 

  Tie Rod End Separator Claw

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Ball Joint Separator AS202A.

  Standard Price:	1,101,960 IDR
  Days to Ship:	8 Day(s)

• 

  Ball Joint Separator (Offset Type)

  KTC(KYOTO TOOL)

  [Applications]
  · Use to separate ball joints.
  [Features]
  · Tough design with 2.5 t rated output
  · Mount and remove just by operating the thrust bolt.
  · Perform work easily with drive tools.
  · Adopted a 9.5 sq. square drive. Can hold reaction force with drive tools.
  · Exchange claw and jaw depending on the work environment.
  · Comes with a "drop-prevention lanyard" for safety.

  • STOCK

  Standard Price:	4,353,663 IDR
  Days to Ship:	8 Day(s)

• 

  Pitman Arm Puller

  KTC(KYOTO TOOL)

  [Applications]
  · Removing pitman arms.
  [Features]
  · The heat-treated forged claw has outstanding durability.
  · Comes with a "drop-prevention lanyard" for safety.
  · The claws bite inward when the center screw is tightened.
  [Scope]
  · Pitman outer diameter ø37 to ø47

  Standard Price:	2,754,090 IDR
  Days to Ship:	8 Day(s)

• 

  Screw Size Conversion Adapter Set For Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Features]
  · Screw size conversion adapter set for Slide Hammer Puller AUD3.

  Standard Price:	495,987 IDR
  Days to Ship:	8 Day(s)

• 

  Drive Shaft Joint Puller Set For Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Features]
  · Drive shaft joint puller set for slide hammer AUD3.

  Standard Price:	1,983,602 IDR
  Days to Ship:	8 Day(s)

• 

  Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Applications]
  · Disassembly of vehicle undercarriage and processing of sheet metal.
  [Scope]
  · Mini cars, ordinary passenger cars and compact trucks.
  [Features]
  · Improved safety. New design concept helps prevent fingers from getting pinched accidentally.
  · A set of 2 types of hammers (large and small). 2 types of shocker (hammer) weights (3.5 kg and 1.2 kg) have been to specified to support a variety of work.

  Standard Price:	2,313,113 IDR-
  Days to Ship:	8 Day(s)

• 

  Hub Puller For Slide Hammer Puller (For 4 Holes / 5 Holes)

  KTC(KYOTO TOOL)

  [Applications]
  · Removing axle shafts, removing brake drums and extruding drive shafts.
  [Features]
  · This puller can be used for both 4 holes and 5 holes.
  · Features a 9.5 sq. square drive and a 27 mm width across flats, allowing rotation to be stopped with a drive tool or monkey wrench, etc.
  · Can be used with AUD4.

  Standard Price:	2,552,122 IDR
  Days to Ship:	8 Day(s)

• 

  Slide Hammer Puller Hub Puller (For 6 Holes)

  KTC(KYOTO TOOL)

  [Applications]
  · Removing axle shafts, removing brake drums and extruding drive shafts.
  [Scope]
  · 6-hole type hub for vehicles.
  [Features]
  · Deep hole design makes this product compatible with front free-wheeling hubs for 4WD vehicles.
  · Features a 12.7 sq. square drive and a 27 mm width across flats, allowing rotation to be stopped with a drive tool or monkey wrench, etc.
  · Can be used with AUD4.

  Standard Price:	1,942,474 IDR
  Days to Ship:	8 Day(s)

• 

  Boot Band Cutter

  KTC(KYOTO TOOL)

  [Applications]
  · Cutting drive shaft boot bands and cutting boots.
  [Scope]
  · Stainless steel boot bands for drive shaft in mini cars to passenger cars.
  · Rubber drive shaft boot.
  [Features]
  · Can cut the boot band while it is attached.
  　Boots can also be cut, enabling work to be completed quickly.
  · After cutting the band, the boot can be cut without exchanging tools.
  · The spring opens the jaws easily, and the stopper ensures compact storage.
  　Pressing the stopper while handles are gripped fixes the handles in a closed state for convenient storage.

  Standard Price:	798,805 IDR
  Days to Ship:	8 Day(s)

• 

  Snap Ring Pliers AS403A

  KTC(KYOTO TOOL)

  [Applications]
  · Use these pliers to remove (attach) snap rings that do not have a hooking hole.
  [Scope]
  
  · Normal type of snap ring with no hooking holes.
  · Thin claw tip is compatible even with rings having a narrow opening.
  
  · This tool is dedicated for snap rings that have a narrow opening and angled notches and are used in Honda vehicles
  · Claws are replaceable in the event of wear or damage.
  [Features]
  
  · Stepped tip shape increases stability when removing or attaching snap rings that were difficult to handle before.
  · Work from either above or from the side of the shaft.
  
  · Remove or attach Honda vehicle snap rings, which were difficult to handle before.

  Standard Price:	462,845 IDR
  Days to Ship:	8 Day(s)

• 

  Snap Ring Pliers AS403B

  KTC(KYOTO TOOL)

  [Applications]
  · Use these pliers to remove (attach) snap rings that do not have a hooking hole.
  [Scope]
  
  · Normal type of snap ring with no hooking holes.
  · Thin claw tip is compatible even with rings having a narrow opening.
  
  · This tool is dedicated for snap rings that have a narrow opening and angled notches and are used in Honda vehicles
  · Claws are replaceable in the event of wear or damage.
  [Features]
  
  · Stepped tip shape increases stability when removing or attaching snap rings that were difficult to handle before.
  · Work from either above or from the side of the shaft.
  
  · Remove or attach Honda vehicle snap rings, which were difficult to handle before.

  Standard Price:	462,841 IDR
  Days to Ship:	8 Day(s)

• 

  Drive Shaft Remover For Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Applications]
  · Removing the drive shaft from transaxles in FF vehicles.
  · This dedicated tool is used with slide hammer pullers (AUD3).

  Standard Price:	1,515,852 IDR
  Days to Ship:	8 Day(s)

• 

  Boot Band Tool With Cutter

  KTC(KYOTO TOOL)

  [Applications]
  · Tightening and cutting joint boot fixing bands for drive shafts.
  [Scope]
  · Outstanding boot bands used in mini cars to passenger cars. (Applicable for all sizes)
  [Features]
  · Ratchet mechanism enables efficient winding.
  · Bending to cutting boot bands performed in one action.

  Standard Price:	1,108,197 IDR
  Days to Ship:	8 Day(s)

• 

  Boot Band Tool

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for clamp type boot bands on drive shafts used in automobiles.
  [Scope]
  · Compatible with mini to passenger cars equipped with clamp type boot bands. (Compatible with import vehicles)
  [Features]
  · Clamp the boot band easily just by screwing in the center bolt.
  · Compatible with ratchet handle, etc., for quick operations using light force. (Hexagon width across flats 14 mm)
  · Center bolt is flanged so the wrench does not deviate even when using offset wrench.
  · Handle grip is made of non-slip plastic.
  · Clamping section adopted a claw shape that does not rise up.

  Standard Price:	2,055,211 IDR
  Days to Ship:	8 Day(s)

• 

  Housing Nut Wrench (For Hexagon / Octagon Nut)

  KTC(KYOTO TOOL)

  [Applications]
  · Tightening and loosening rear housing nuts of large vehicles.
  [Scope]
  · Rear housing nuts used in large vehicles (4 t and larger).
  Hexagon: Width across flats 85 mm to 130 mm
  Octagon: Width across flats 90 mm to 125 mm
  [Features]
  · Special claw shape supports both hexagon and octagon bolts.
  · Special claw shape securely holds the sides of the nut.
  · Just turn the hexagon knob with an offset wrench or drive tool with a 17 mm width across flats.

  Standard Price:	7,067,955 IDR
  Days to Ship:	8 Day(s)

• 

  Rear Hub Puller For Large Vehicle

  KTC(KYOTO TOOL)

  [Applications]
  · Removing rear wheel hubs on large vehicles.
  [Scope]
  · Rear wheel hubs on large vehicles (4 t or larger) that meet the following conditions.
  　· 8 or 10 holes (number of axle shaft mounting bolts)
  · P.C.D 140 mm to 188 mm
  · Axle shaft mounting bolt size M12 to M16
  [Features]
  · Vehicle's axle shaft mounting bolts are used so that aluminum wheels, etc., will not be damaged.
  · Just tighten with an offset wrench or socket (27 mm width across flats) and a drive tool.

  Standard Price:	4,411,632 IDR
  Days to Ship:	8 Day(s)

• 

  Front Hub Puller For Large Vehicle

  KTC(KYOTO TOOL)

  [Applications]
  · Removing front wheel hubs on large vehicles.
  [Scope]
  · Front wheel hubs on large vehicles (4 t or larger) that meet the following conditions.
  　· 6, 8 or 10-hole (6 or 8 holes: JIS method, 10 holes: ISO method) wheel
  · P.C.D 222.25 mm to 335 mm
  · Hub bolt size M20 × 1.5, M22 × 1.5, M24 × 1.5
  [Features]
  · Puller is attached to hub bolt for removal so that aluminum wheels, etc., will not be damaged.
  · L and R stamped on arm body for quick identification of left and right.
  · Hub bolt sizes are M20, M22 and M24. Can identify bolt sizes by the number of lines. (M20: 1 line, M22: 2 lines, M24: 3 lines)

  Standard Price:	7,460,660 IDR
  Days to Ship:	8 Day(s)

• 

  Grease Exchanger

  KTC(KYOTO TOOL)

  [Applications]
  · Charging grease to hub bearings during various automobile inspections and maintenance work.
  [Features]
  · Can shorten work time to approx. 1/7th. (KTC experiment ratio)
  · Suitable for a variety of applications.
  · Increase work efficacy while preventing hand contamination.
  · Grease in the can will be suctioned up to the last drop so waste is eliminated and grease is conserved.

  Standard Price:	19,415,385 IDR
  Days to Ship:	Quote

• 

  Grease Exchanger Highload

  KTC(KYOTO TOOL)

  [Applications]
  · Charging grease to heavy load bearings in large automobiles.
  · Charging grease to hub bearings during various automobile inspections and maintenance work.
  [Features]
  · Adopted a bearing lock mechanism.
  Bearings are locked with upper and lower cones so that grease is prevented from seeping from the bearing clearance. This design ensures that the force applied on the handle is all converted to grease charging pressure.
  Bearings can be locked with a single touch.
  · Diverse range of applications.
  Compatible with a variety of bearing sizes used in automobiles (from mini cars to large vehicles) and construction equipment, etc.
  · Easy operation increases work efficacy while preventing hand contamination.
  Exchange grease easily without any need for advanced skills.
  Since hands are not contaminated with grease, the next work can be started right away.
  · Eliminate waste and conserve grease.
  The minimum required grease is injected, and the can of grease can be completely used up. Consumption is reduced compared to manual work.
  · Simple, trouble-free mechanism.
  Very little trouble because the mechanism is simple and has outstanding durability.

  Standard Price:	25,024,615 IDR
  Days to Ship:	Quote

• 

  Air Grease Feeder Nozzle Adapter Set

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Air Grease Feeder AVG35.

  Standard Price:	4,523,980 IDR
  Days to Ship:	8 Day(s)

• 

  Air Grease Feeder Nozzle (4 Pc Set)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Air Grease Feeder AVG35.

  Standard Price:	694,587 IDR
  Days to Ship:	8 Day(s)

• 

  Strut Spring Compressor

  KTC(KYOTO TOOL)

  [Applications]
  · This strut spring compressor is a dedicated tool for removing and attaching the strut type coil springs used in automobile suspensions.
  [Features]
  · The strut spring compressor is designed so that the fracture mechanism in the drive provided at the center screw bolt section breaks if an abnormal load is applied on the spring compressor during work.
  · The center screw bolt is integrated into the main body to protect the screw section.
  · The main body has vertical pipe specifications. The compact, easy-to-use design increases work efficiency.

  • STOCK

  Standard Price:	10,875,499 IDR
  Days to Ship:	8 Day(s)

• 

  Strut Spring Compressor Main Body

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Strut Spring Compressor AS10.

  Standard Price:	6,641,583 IDR
  Days to Ship:	8 Day(s)

• 

  12.7 Sq. Impact Wrench Socket For Wheel Nut (Long And Thin)

  KTC(KYOTO TOOL)

  [Features]
  · Rubber cushion protects plated nuts and ornamental nuts.
  · [Applications]
  · A dedicated socket wrench for tightening and loosening automobile wheel nuts. Compatible with impact wrenches.

  Standard Price:	290,020 IDR-
  Days to Ship:	8 Day(s) or more

• 

  19.0 Sq. Inner Socket For Impact Wrench

  KTC(KYOTO TOOL)

  • STOCK

  Standard Price:	571,632 IDR-
  Days to Ship:	8 Day(s)

• 

  25.4 Sq. Inner Socket For Impact Wrench

  KTC(KYOTO TOOL)

  Standard Price:	533,662 IDR-
  Days to Ship:	8 Day(s)

• 

  Brake Tool Set (For Drum Brakes) [12 Items]

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool set for disassembly, assembly and adjustment of automotive drum brakes.
  [Scope]
  · Drum brake systems in mini cars to compact trucks (up to 2 t class).

  Standard Price:	3,116,590 IDR
  Days to Ship:	8 Day(s)

• 

  Brake Tool Set (For Disc Brakes) [6 Items]

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool set for disassembly, assembly and adjustment of automotive disc brakes.
  [Scope]
  · Disc brake systems in mini cars to compact trucks (up to 2 t class).

  Standard Price:	3,321,352 IDR
  Days to Ship:	8 Day(s)

• 

  Brake Drum Screwdriver

  KTC(KYOTO TOOL)

  [Applications]
  · Removing and attaching brake drum screws and door hinge bolts, etc.
  [Features]
  · T-shaped handle with thick non-slip grip is easy to apply force with.
  · Can also be used to remove and attach door hinge bolts, etc.

  Standard Price:	312,075 IDR
  Days to Ship:	8 Day(s)

• 

  Tension Spring Tool

  KTC(KYOTO TOOL)

  [Features]
  Has a curved shaft so that springs move smoothly.
  Grip is designed for a good fit, making assembly easier.

  Standard Price:	220,036 IDR
  Days to Ship:	8 Day(s)

• 

  T-Shaped Drum Remover

  KTC(KYOTO TOOL)

  [Scope]
  · Removal of brake drums mainly for mini cars.
  [Features]
  · The sliding handle allows brake drums to be removed easily without the handles interfering when using 2 removers.
  · Replaceable end screw section allows worn screw to be restored just by replacing the end screw.

  Standard Price:	340,112 IDR
  Days to Ship:	8 Day(s)

• 

  C Type Washer Tool

  KTC(KYOTO TOOL)

  [Applications]
  · Removing and attaching C type washers.
  [Features]
  · Dedicated claw for improved workability.
  · Speedily remove the C-washer by spreading it with the claw cleats and pushing it out from the flat side.

  Standard Price:	763,296 IDR
  Days to Ship:	8 Day(s)

• 

  Parking Shoe Lever Tool

  KTC(KYOTO TOOL)

  Connect and disconnect parking cables with a single touch.
  [Applications]
  · Connecting and disconnecting parking cables.
  [Features]
  · Dedicated claws have been adopted, ensuring that parking brake cables are not dislodged easily.

  Standard Price:	452,027 IDR
  Days to Ship:	8 Day(s)

Loading...