KTC(KYOTO TOOL) Vehicle Maintenance Tools（Product Type：Generic Tool）

• 

  Service Creeper

  KTC(KYOTO TOOL)

  [Features]
  · It is a framework that does not interfere with shoulders and has a high-density cushion.

  • STOCK

  Standard Price:	974,110 IDR
  Days to Ship:	8 Day(s)

• 

  Service Creeper

  KTC(KYOTO TOOL)

  [Features]
  · It is a framework that does not interfere with shoulders and has a high-density cushion.
  · Makes holding difficult positions less tiresome by using a mechanism that allows the headrest angle to be adjusted to three different levels.

  • STOCK

  Standard Price:	2,229,231 IDR
  Days to Ship:	1 Day(s)

• 

  Multi Puller Set, AS301

  KTC(KYOTO TOOL)

  With this single set, the axles of respective manufacturers can be disassembled and assembled.
  [Features]
  ·This single set can be used for axle disassembly and assembly work
  ·Compatible with both types, one with the hub bearing on the inner side and the other with the hub bearing on the outer side
  ·Hydraulic press can be used, reducing work labor and work time
  ·Arms can be attached and detached with a fixed ball in a single-action
  ·The center bolt has a bearing, and the drive torque is light
  ·Compatible not only with the axle of FF cars, but also with the rear of FR cars and 4WD cars
  ·Wide range of applications for, besides axles, steering wheels, differential companion flanges, mission bearings and gears
  ·It can also be used to pull out various bearings and gears other than automobiles by interchanging the set content products
  [Applications]
  ·Mainly compatible with axles from FF light vehicles to ordinary passenger cars

  Standard Price:	14,463,292 IDR
  Days to Ship:	8 Day(s)

• 

  Fender Cover

  KTC(KYOTO TOOL)

  [Features]
  · Easily attach onto fender with 4 magnetic rubber pieces provided inside.
  · Folding seam makes it easier to set the cover onto fenders.
  · The cloth interior is gentle against bodies, and the soft vinyl leather exterior softens shocks.
  · The undercarriage can be worked on even while the fender cover is attached. The long size is sufficient to cover even long-nosed cars.

  Standard Price:	812,738 IDR
  Days to Ship:	8 Day(s)

• 

  Service Creeper Caster

  KTC(KYOTO TOOL)

  [Features]
  · Service Creeper: Casters for AYSC-20F/20R.

  • STOCK

  Standard Price:	146,154 IDR
  Days to Ship:	1 Day(s)

• 

  Fluid Tester

  KTC(KYOTO TOOL)

  Accessories: Syringe for fluid measurement, soft storage case (cloth)
  [Applications]
  · Measurement of coolant (LLC) freezing temperature (scale A / B)
  · Measurement of specific gravity of battery electrolytic fluid (scale C)
  [Features]
  · Measure just by placing some fluid on the prism surface and looking through the lens.
  [Measurement range]
  · Coolant (LLC): Ethylene - 0 to -55°C (minimum scale 5°C)
  Propylene: 0 to -50°C (minimum scale 5°C)
  · Battery fluid: 1.10 to 1.40 kg/e (minimum scale 0.01 kg/e)

  Standard Price:	2,724,135 IDR
  Days to Ship:	8 Day(s)

• 

  Rolling Wedge Bar

  KTC(KYOTO TOOL)

  [Features]
  · Multipurpose bar suitable for prying and expanding work.
  · The round shaft with ratchet enables this product to be used also for centering holes.

  Standard Price:	560,203 IDR
  Days to Ship:	12 Day(s)

• 

  Carburetor Screwdriver Set

  KTC(KYOTO TOOL)

  · Screwdrivers for making adjustments.

  Standard Price:	585,926 IDR
  Days to Ship:	8 Day(s)

• 

  Carburetor Screwdriver (Flat)

  KTC(KYOTO TOOL)

  · Screwdrivers for making adjustments.

  Standard Price:	279,968 IDR
  Days to Ship:	30 Day(s)

• 

  Oil Pan Seal Cutter

  KTC(KYOTO TOOL)

  [Applications]
  · Use to cut sealing packing when removing oil pans.
  [Features]
  · Arc-shaped cutter can be driven into the seal section.
  · The side cutter has a sharp angle and fits well against the base when driven in from the side, enabling movement.
  · The cutter shape, large striking edge and removable handle enable work to be performed safely.
  · Remove handle to work in confined places and remove oil pans easily.

  Standard Price:	937,132 IDR
  Days to Ship:	8 Day(s)

• 

  Screw Size Conversion Adapter Set For Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Features]
  · Screw size conversion adapter set for Slide Hammer Puller AUD3.

  Standard Price:	495,987 IDR
  Days to Ship:	8 Day(s)

• 

  Drive Shaft Joint Puller Set For Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Features]
  · Drive shaft joint puller set for slide hammer AUD3.

  Standard Price:	1,983,602 IDR
  Days to Ship:	8 Day(s)

• 

  Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Applications]
  · Disassembly of vehicle undercarriage and processing of sheet metal.
  [Scope]
  · Mini cars, ordinary passenger cars and compact trucks.
  [Features]
  · Improved safety. New design concept helps prevent fingers from getting pinched accidentally.
  · A set of 2 types of hammers (large and small). 2 types of shocker (hammer) weights (3.5 kg and 1.2 kg) have been to specified to support a variety of work.

  Standard Price:	2,313,113 IDR-
  Days to Ship:	8 Day(s)

• 

  Hub Puller For Slide Hammer Puller (For 4 Holes / 5 Holes)

  KTC(KYOTO TOOL)

  [Applications]
  · Removing axle shafts, removing brake drums and extruding drive shafts.
  [Features]
  · This puller can be used for both 4 holes and 5 holes.
  · Features a 9.5 sq. square drive and a 27 mm width across flats, allowing rotation to be stopped with a drive tool or monkey wrench, etc.
  · Can be used with AUD4.

  Standard Price:	2,552,122 IDR
  Days to Ship:	8 Day(s)

• 

  Slide Hammer Puller Hub Puller (For 6 Holes)

  KTC(KYOTO TOOL)

  [Applications]
  · Removing axle shafts, removing brake drums and extruding drive shafts.
  [Scope]
  · 6-hole type hub for vehicles.
  [Features]
  · Deep hole design makes this product compatible with front free-wheeling hubs for 4WD vehicles.
  · Features a 12.7 sq. square drive and a 27 mm width across flats, allowing rotation to be stopped with a drive tool or monkey wrench, etc.
  · Can be used with AUD4.

  Standard Price:	1,942,474 IDR
  Days to Ship:	8 Day(s)

• 

  Boot Band Cutter

  KTC(KYOTO TOOL)

  [Applications]
  · Cutting drive shaft boot bands and cutting boots.
  [Scope]
  · Stainless steel boot bands for drive shaft in mini cars to passenger cars.
  · Rubber drive shaft boot.
  [Features]
  · Can cut the boot band while it is attached.
  　Boots can also be cut, enabling work to be completed quickly.
  · After cutting the band, the boot can be cut without exchanging tools.
  · The spring opens the jaws easily, and the stopper ensures compact storage.
  　Pressing the stopper while handles are gripped fixes the handles in a closed state for convenient storage.

  Standard Price:	798,805 IDR
  Days to Ship:	8 Day(s)

• 

  Snap Ring Pliers AS403A

  KTC(KYOTO TOOL)

  [Applications]
  · Use these pliers to remove (attach) snap rings that do not have a hooking hole.
  [Scope]
  
  · Normal type of snap ring with no hooking holes.
  · Thin claw tip is compatible even with rings having a narrow opening.
  
  · This tool is dedicated for snap rings that have a narrow opening and angled notches and are used in Honda vehicles
  · Claws are replaceable in the event of wear or damage.
  [Features]
  
  · Stepped tip shape increases stability when removing or attaching snap rings that were difficult to handle before.
  · Work from either above or from the side of the shaft.
  
  · Remove or attach Honda vehicle snap rings, which were difficult to handle before.

  Standard Price:	462,845 IDR
  Days to Ship:	8 Day(s)

• 

  Snap Ring Pliers AS403B

  KTC(KYOTO TOOL)

  [Applications]
  · Use these pliers to remove (attach) snap rings that do not have a hooking hole.
  [Scope]
  
  · Normal type of snap ring with no hooking holes.
  · Thin claw tip is compatible even with rings having a narrow opening.
  
  · This tool is dedicated for snap rings that have a narrow opening and angled notches and are used in Honda vehicles
  · Claws are replaceable in the event of wear or damage.
  [Features]
  
  · Stepped tip shape increases stability when removing or attaching snap rings that were difficult to handle before.
  · Work from either above or from the side of the shaft.
  
  · Remove or attach Honda vehicle snap rings, which were difficult to handle before.

  Standard Price:	462,841 IDR
  Days to Ship:	8 Day(s)

• 

  Housing Nut Wrench (For Hexagon / Octagon Nut)

  KTC(KYOTO TOOL)

  [Applications]
  · Tightening and loosening rear housing nuts of large vehicles.
  [Scope]
  · Rear housing nuts used in large vehicles (4 t and larger).
  Hexagon: Width across flats 85 mm to 130 mm
  Octagon: Width across flats 90 mm to 125 mm
  [Features]
  · Special claw shape supports both hexagon and octagon bolts.
  · Special claw shape securely holds the sides of the nut.
  · Just turn the hexagon knob with an offset wrench or drive tool with a 17 mm width across flats.

  Standard Price:	7,067,955 IDR
  Days to Ship:	8 Day(s)

• 

  Rear Hub Puller For Large Vehicle

  KTC(KYOTO TOOL)

  [Applications]
  · Removing rear wheel hubs on large vehicles.
  [Scope]
  · Rear wheel hubs on large vehicles (4 t or larger) that meet the following conditions.
  　· 8 or 10 holes (number of axle shaft mounting bolts)
  · P.C.D 140 mm to 188 mm
  · Axle shaft mounting bolt size M12 to M16
  [Features]
  · Vehicle's axle shaft mounting bolts are used so that aluminum wheels, etc., will not be damaged.
  · Just tighten with an offset wrench or socket (27 mm width across flats) and a drive tool.

  Standard Price:	4,411,632 IDR
  Days to Ship:	8 Day(s)

• 

  Front Hub Puller For Large Vehicle

  KTC(KYOTO TOOL)

  [Applications]
  · Removing front wheel hubs on large vehicles.
  [Scope]
  · Front wheel hubs on large vehicles (4 t or larger) that meet the following conditions.
  　· 6, 8 or 10-hole (6 or 8 holes: JIS method, 10 holes: ISO method) wheel
  · P.C.D 222.25 mm to 335 mm
  · Hub bolt size M20 × 1.5, M22 × 1.5, M24 × 1.5
  [Features]
  · Puller is attached to hub bolt for removal so that aluminum wheels, etc., will not be damaged.
  · L and R stamped on arm body for quick identification of left and right.
  · Hub bolt sizes are M20, M22 and M24. Can identify bolt sizes by the number of lines. (M20: 1 line, M22: 2 lines, M24: 3 lines)

  Standard Price:	7,460,660 IDR
  Days to Ship:	8 Day(s)

• 

  19.0 Sq. Inner Socket For Impact Wrench

  KTC(KYOTO TOOL)

  • STOCK

  Standard Price:	571,632 IDR-
  Days to Ship:	8 Day(s)

• 

  25.4 Sq. Inner Socket For Impact Wrench

  KTC(KYOTO TOOL)

  Standard Price:	533,662 IDR-
  Days to Ship:	8 Day(s)

• 

  T-Shaped Flexible Plug Wrench

  KTC(KYOTO TOOL)

  [Features]
  · Can be used to replace plugs located in confined deep places.
  · The T-shaped handle can be spun quickly.
  · Flexible mechanism allows wrench to be rotated at an angle.
  · Magnet attached to prevent spark plugs from falling down.

  Standard Price:	774,943 IDR
  Days to Ship:	8 Day(s)

• 

  Connector Housing Pliers

  KTC(KYOTO TOOL)

  [Applications]
  · Unlocking and removing connector housings.
  [Features]
  · Smoothly unlock difficult small locks, thin locks and indented locks.
  · A variety of shapes are supported with three types of claws having different bending angles and tip shapes.
  · Long claws have been adopted so the tool can reach into deep areas while avoiding bundled wiring.

  Standard Price:	1,051,522 IDR
  Days to Ship:	8 Day(s)

• 

  Telescoping Driver For Headlight Optical Axis Adjustment

  KTC(KYOTO TOOL)

  [Applications]
  · Driver (cross No.2) dedicated to adjusting the headlight optical axis in automobiles, etc.
  [Scope]
  · Cross. No.2 driver for adjusting the headlight optical axis.
  [Features]
  · Telescoping shaft extends to 230 mm / 290 mm.
  · The size before extending (total length 340 mm) is just right for storing in a tool box.
  · The thin 5 mm shaft makes it suitable for models with narrow service holes.

  Standard Price:	339,968 IDR
  Days to Ship:	8 Day(s)

• 

  Electric Pliers (For Thin Automobile Wires)

  KTC(KYOTO TOOL)

  [Applications]
  · Repairing automobile wire harnesses.
  [Scope]
  · Applicable wires: JASO AVS AVSS 0.3, 0.5, 0.85, 1.25.
  [Features]
  · Compatible with low-voltage automobile wires 0.3 / 0.5 / 0.85 / 1.25.
  · Suitable for 3 applications: wire cutting, wire stripping and terminal caulking functions.
  · With a locking function for handy storage.

  Standard Price:	498,765 IDR
  Days to Ship:	8 Day(s)

• 

  Electric Pliers

  KTC(KYOTO TOOL)

  [Applications]
  · Wire cutting, wire stripping and terminal caulking.
  [Features]
  · Suitable for 3 applications: wire cutting, wire stripping and terminal caulking functions.
  · With a locking function for handy storage.
  [Scope]
  · Wire stripping and cutting

  Standard Price:	319,341 IDR
  Days to Ship:	8 Day(s)

• 

  9.5 Sq. O₂ Sensor Wrench Long Type

  KTC(KYOTO TOOL)

  [Features]
  · The tool's original shape allows it to avoid obstacles, enabling the O2 sensor to be removed without removing front bumper, improving work comfort.
  · By adopting a shape that is applicable not only for newer Daihatsu cars but older Daihatsu cars and Suzuki cars as well, this tool can cover most mini car models.

  Standard Price:	803,297 IDR
  Days to Ship:	8 Day(s)

• 

  Battery Catcher

  KTC(KYOTO TOOL)

  [Features]
  Remove batteries from tight spaces that are unreachable by hand. The batteries are gripped with rubber pads, keeping them protected.
  
  [Applications]
  · Removing and transporting automobile batteries.
  [Scope]
  · Batteries for mini cars, ordinary passenger cars and minivans.
  　Battery width 120 mm to 180 mm, weight 22 kg or less.
  　(Reference battery size: JIS26A17RL to 95D31RL)

  • STOCK

  Standard Price:	1,292,861 IDR
  Days to Ship:	8 Day(s)

• 

  9.5 Sq. O₂ Sensor Socket Set

  KTC(KYOTO TOOL)

  [Features]
  · Designed with an optimal length and shape for use with O2 sensors.
  · Two types of drives (square drive: 9.5 sq., width across flats: 19 mm) are available, allowing use with many drive tools.
  · Use the attachments to avoid hindrances.

  Standard Price:	728,851 IDR
  Days to Ship:	8 Day(s) or more

• 

  Slide Hammer Puller AUD5

  KTC(KYOTO TOOL)

  [Features]
  · Shocker (hammer) weight is 5.3 kg.
  · AUD3 and AUD4 with 1.2 kg and 3.5 kg respective shocker weights are also available.
  · Hex nut (AUD5-6) is available as a service part.

  Standard Price:	5,662,470 IDR
  Days to Ship:	8 Day(s)

• 

  Slide Hammer Puller Sheet Metal Attachment Set [5 Pc Set]

  KTC(KYOTO TOOL)

  [Applications]
  · Pulling out sheet metal for automobile bodies.
  [Scope]
  · Mini cars, ordinary passenger cars and compact trucks.
  [Features]
  · Slide hammer puller has a new concept design with safety considerations to prevent accidental hand pinching.

  Standard Price:	10,563,562 IDR
  Days to Ship:	8 Day(s)

• 

  Door Stopper

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for stopping doors and rear gates so that they can be kept slightly open when performing sheet metal work or replacing parts.
  · Compatible with the following door striker shapes.* Striker ø10 mm or less (excluding vehicles with automatic locking mechanisms).
  [Features]
  · Can be secured by using it on the lock section of doors.
  · Compatible with most models.
  · Can be mounted and removed easily.

  Standard Price:	448,728 IDR
  Days to Ship:	12 Day(s)

• 

  Clip Clamp Tool With Hanger Set [11 Pc Set]

  KTC(KYOTO TOOL)

  [Applications]
  · For automobile lining and clip removal.
  [Scope]
  · Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.
  [Features]
  · Come with a handy hanger.

  Standard Price:	4,652,427 IDR
  Days to Ship:	8 Day(s)

• 

  Angled Clip Clamp Tool Set [3 Pc Set]

  KTC(KYOTO TOOL)

  [Applications]
  · For automobile lining and clip removal.
  [Scope]
  · Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.

  Standard Price:	1,246,202 IDR
  Days to Ship:	8 Day(s)

• 

  Straight Clip Clamp Tool Set [3 Pc Set]

  KTC(KYOTO TOOL)

  [Applications]
  · For automobile lining and clip removal.
  [Scope]
  · Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.

  Standard Price:	2,270,769 IDR
  Days to Ship:	Quote

• 

  Angled Short Clip Clamp Tool Set [2 Pc Set]

  KTC(KYOTO TOOL)

  [Applications]
  · For automobile lining and clip removal.
  [Scope]
  · Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.

  Standard Price:	240,064 IDR
  Days to Ship:	8 Day(s)

• 

  Angled Clip Clamp Tool

  KTC(KYOTO TOOL)

  [Applications]
  · For automobile lining and clip removal.
  [Scope]
  · Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.

  Standard Price:	411,582 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Straight Clip Clamp Tool

  KTC(KYOTO TOOL)

  [Applications]
  · For automobile lining and clip removal.
  [Scope]
  · Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.

  Standard Price:	404,580 IDR-
  Days to Ship:	8 Day(s)

• 

  Angled Short Clip Clamp Tool

  KTC(KYOTO TOOL)

  [Applications]
  · For automobile lining and clip removal.
  [Scope]
  · Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.

  Standard Price:	113,870 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Long Clip Clamp Tool

  KTC(KYOTO TOOL)

  [Applications]
  · For automobile lining and clip removal.
  [Scope]
  · Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.

  Standard Price:	411,599 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Long Straight Clip Clamp Tool

  KTC(KYOTO TOOL)

  [Applications]
  · For automobile lining and clip removal.
  [Scope]
  · Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.

  Standard Price:	409,017 IDR-
  Days to Ship:	8 Day(s)

• 

  Long Movable Fulcrum Clip Clamp Tool

  KTC(KYOTO TOOL)

  [Applications]
  · For automobile lining and clip removal.
  [Scope]
  · Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan

  Standard Price:	437,073 IDR
  Days to Ship:	8 Day(s)

• 

  Medium Size Handy Remover

  KTC(KYOTO TOOL)

  [Specifications]
  ·It is used for removing all linings.
  ·Please choose according to the size , application, etc.

  • STOCK

  Standard Price:	45,760 IDR-
  Days to Ship:	1 Day(s) or more

Loading...