KTC(KYOTO TOOL) Vehicle Maintenance Tools

• 

  Tire Lever, OHZ-210

  KTC(KYOTO TOOL)

  [Features]
  ·With an overall length of 210 mm, it is convenient to carry when touring
  ·It is a forged product with appropriate heat treatment, so it has excellent durability

  Standard Price:	176,282 IDR
  Days to Ship:	8 Day(s)

• 

  Plug Wrench:

  KTC(KYOTO TOOL)

  [Features]
  · Uses a new design instantly recognizable as a plug wrench.
  · Has a magnet that prevents the spark plug from falling off.
  [Applications]
  · Wrench for spark plug replacement

  • STOCK

  Standard Price:	225,965 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Armature Bearing Puller

  KTC(KYOTO TOOL)

  [Features]
  · As the claw tip is thin, it can be used in narrow gaps.
  · Puller tool for pulling small bearings.

  • STOCK

  Standard Price:	1,713,412 IDR-
  Days to Ship:	8 Day(s)

• 

  Fluid Tester

  KTC(KYOTO TOOL)

  Accessories: Syringe for fluid measurement, soft storage case (cloth)
  [Applications]
  · Measurement of coolant (LLC) freezing temperature (scale A / B)
  · Measurement of specific gravity of battery electrolytic fluid (scale C)
  [Features]
  · Measure just by placing some fluid on the prism surface and looking through the lens.
  [Measurement range]
  · Coolant (LLC): Ethylene - 0 to -55°C (minimum scale 5°C)
  Propylene: 0 to -50°C (minimum scale 5°C)
  · Battery fluid: 1.10 to 1.40 kg/e (minimum scale 0.01 kg/e)

  Standard Price:	2,724,135 IDR
  Days to Ship:	8 Day(s)

• 

  Multi Puller Set, AS301

  KTC(KYOTO TOOL)

  With this single set, the axles of respective manufacturers can be disassembled and assembled.
  [Features]
  ·This single set can be used for axle disassembly and assembly work
  ·Compatible with both types, one with the hub bearing on the inner side and the other with the hub bearing on the outer side
  ·Hydraulic press can be used, reducing work labor and work time
  ·Arms can be attached and detached with a fixed ball in a single-action
  ·The center bolt has a bearing, and the drive torque is light
  ·Compatible not only with the axle of FF cars, but also with the rear of FR cars and 4WD cars
  ·Wide range of applications for, besides axles, steering wheels, differential companion flanges, mission bearings and gears
  ·It can also be used to pull out various bearings and gears other than automobiles by interchanging the set content products
  [Applications]
  ·Mainly compatible with axles from FF light vehicles to ordinary passenger cars

  Standard Price:	14,463,292 IDR
  Days to Ship:	8 Day(s)

• 

  Door Hinge Bolt Wrench

  KTC(KYOTO TOOL)

  [Features]
  · Wrench for adjusting, attaching and detaching door mounting bolts on vehicles. Makes tightening and loosening work on bolts on bodies that had been difficult to perform with conventional box-end or open-end wrenches easy.
  · The aperture size is the same, and it is set to an angle that is suitable for both left and right doors.
  · Adopts a Power Fit shape that prevents the concentration of stress in the aperture and helps keep the edges of bolts and nuts free from damage, allowing for more reliable tightening and loosening work.
  · Main applications include DMZ-12: Toyota, Nissan, Mitsubishi, Honda, Mazda, Subaru, Daihatsu vehicles, DMZ-13: recent Nissan vehicles (not including mini cars), DMZ-14: Toyota, Daihatsu, Mitsubishi
  · 12 pt., Power Fit

  Standard Price:	709,231 IDR
  Days to Ship:	Quote

• 

  Oil filter wrench

  KTC(KYOTO TOOL)

  [Features]
  · Striving for usability, this design has reduced the total height and provides a generous overlap allowance that keeps it from slipping easily.
  · Due to the effect of the uneven outer periphery, it is less slippery when installing an oil filter by hand.
  · Made of die-cast aluminum, lighter at about 60% of the weight of an equivalent steel product.
  · Allows combined use of a ratchet and a double box end wrench, depending on the work environment.
  [Applications]
  · Tool for Replacement of Oil Filters

  • STOCK

  Standard Price:	219,671 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Chain type cartridge wrench

  KTC(KYOTO TOOL)

  [Features]
  · Used for removing cartridge type oil filters.
  · With its own oscillating head mechanism, rotational load acts on the entire chain, preventing concentrated loads that cause distortion of the cartridge.
  [Applications]
  · Tool for Replacement of Oil Filters and Fuel Filters

  • STOCK

  Standard Price:	892,905 IDR
  Days to Ship:	8 Day(s)

• 

  Chain type oil filter wrench

  KTC(KYOTO TOOL)

  [Features]
  · Used for removing cartridge type oil filters.
  · A 12.7 sq. spinner handle or offset wrench with 24 mm width across flats can be used depending on the operating environment.
  · The chain does not easily come off during work, enabling reliable loosening work.
  [Applications]
  · Tool for Replacement of Oil Filters

  • STOCK

  Standard Price:	1,486,154 IDR
  Days to Ship:	1 Day(s)

• 

  Oil Filter Wrench

  KTC(KYOTO TOOL)

  [Features]
  · Easily wrung out, non-slip adjustable type.
  · The shape allows working freely even in narrow places.
  [Applications]
  · For oil filter removal

  • STOCK

  Standard Price:	621,269 IDR-
  Days to Ship:	8 Day(s)

• 

  Hose Clip Tool

  KTC(KYOTO TOOL)

  [Features]
  · Because it is a screw type and stays secure when the hose clamp is loosened, it can be used accurately even in tight working spaces.
  · The jaw has a waffle-pattern gripping surface so that the hose clip does not slip and come off accidentally.
  [Applications]
  · For removing spring-type hose clip pliers

  • STOCK

  Standard Price:	559,150 IDR
  Days to Ship:	8 Day(s)

• 

  Hose Plucker

  KTC(KYOTO TOOL)

  [Features]
  · 3 types are available and can be used even for a narrow working space.
  [Applications]
  · For removing adhesive from hoses used for various machinery.
  · For pulling out hoses and peeling adhesion

  • STOCK

  Standard Price:	344,615 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Pinch-Off Pliers

  KTC(KYOTO TOOL)

  [Features]
  · Uses a stepless automatic locking mechanism to lock the pliers just by holding the object, which achieves quick operation.
  · Can be released simply by opening the grip.
  · Tool for blocking hoses.

  • STOCK

  Standard Price:	473,371 IDR-
  Days to Ship:	8 Day(s)

• 

  Handy Bar Mini

  KTC(KYOTO TOOL)

  [Features]
  · Convenient for prying, spreading and removing.
  · Shaft has an I-shaped cross section which makes it easy to use.
  · The grip is made of rubber and will not split.
  · The shaft runs through the grip to allow hitting.
  [Applications]
  · Maintenance Auxiliary Tool.

  • STOCK

  Standard Price:	848,847 IDR-
  Days to Ship:	8 Day(s)

• 

  Free Position Wrench

  KTC(KYOTO TOOL)

  [Features]
  · Can be used according to the work environment in combination with a special handle and drive.
  · It can also be used separately as a wrench.
  · Convenient for tightening and loosening of bolts and nuts in narrow places.
  · It supports a wide variety of bolts and nuts with plentiful size variations.
  · The wrench body and handle are separate, and the rising angle of the handle and various combinations of the front and back of the wrench socket allow various applications.
  · Since the fixed angle of the wrench and the handle can be adjusted in 24 positions every 15°, the angle can be set to suit the work environment.
  · Fast-feed operation is possible due to the cranking motion of pushing/pulling the handle while the body and handle are free.
  · The wrench is a compact plate ratchet type.
  [Applications]
  · Automotive Maintenance Tools
  · Tightening/loosening of bolts/nuts in narrow places

  • STOCK

  Standard Price:	2,512,617 IDR-
  Days to Ship:	8 Day(s)

• 

  Lock Nut Chisel

  KTC(KYOTO TOOL)

  [Features]
  · It can be used to both remove the caulking of lock nuts and perform caulking.
  · As the tip has a boat shape, clean caulking can be produced simply by pushing in and striking.
  · The grip is made of rubber and flanged to prevent accidentally hitting hands.
  · Product is forged so is very robust.
  · The tip width is 4.5 mm.
  · A chisel for attaching/detaching lock nuts.

  Standard Price:	404,320 IDR
  Days to Ship:	8 Day(s)

• 

  Tie rod locknut wrench

  KTC(KYOTO TOOL)

  [Features]
  · Wrench shape securely holds the nut angle, enabling firm nut tightening and loosening without slipping.
  · Wide grip shape which helps prevent hand pain even when force is applied.
  · Since the size scale is displayed, it can be set to the size suitable for the nut to be used.
  · Wrench for tightening/loosening tie rod ends.

  • STOCK

  Standard Price:	403,925 IDR
  Days to Ship:	8 Day(s)

• 

  Brake pipe offset wrench (MZ10)

  KTC(KYOTO TOOL)

  [Features]
  · The 5-point contact shape of the aperture part ensures reliable nut rotation.
  [Applications]
  · For removal of pipe flare nuts of brake pipes and flare nuts of clutch pipes (hydraulic only).

  • STOCK

  Standard Price:	281,530 IDR-
  Days to Ship:	8 Day(s)

• 

  Tension Spring Tool

  KTC(KYOTO TOOL)

  [Features]
  · Safe operation is possible with a tip where its spring does not easily come off and a T-shaped handle with which you can easily apply force.
  [Applications]
  · Spring removal

  • STOCK

  Standard Price:	196,611 IDR
  Days to Ship:	8 Day(s)

• 

  Elbow Connector Socket

  KTC(KYOTO TOOL)

  [Features]
  · Tool for tightening and loosening one-touch type elbow connector used on trucks of 4 t or more.
  [Applications]
  · Single-Touch Elbow Connector Socket

  • STOCK

  Standard Price:	356,923 IDR-
  Days to Ship:	1 Day(s)

• 

  Seal Pick Tool

  KTC(KYOTO TOOL)

  [Features]
  · Rounded tip for scratch resistance.
  · The grip shape is easy to grip and the shaft is long, so it is easy to remove seals and boots.
  · As the tip is round, it can remove seals and boots without damaging them.
  [Applications]
  · Removal of various stickers

  • STOCK

  Standard Price:	153,426 IDR
  Days to Ship:	8 Day(s)

• 

  Valve Screwdriver

  KTC(KYOTO TOOL)

  [Features]
  · Operation is improved without the tool contacting the wheel, due to the long shaft.
  · The grip has a small diameter to facilitate quick turning.
  [Applications]
  · For Mounting and Removing Tire Valve Cores

  • STOCK

  Standard Price:	53,037 IDR
  Days to Ship:	8 Day(s)

• 

  KTC Drive Chain Tool MCCU-BB

  KTC(KYOTO TOOL)

  A tool for such as press-fitting chain pins and joint plates when replacing a motorcycle drive chain.

  Standard Price:	100,000 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Drive Chain Tool

  KTC(KYOTO TOOL)

  [Features]
  · The body is designed with an optimum shape based on strength analysis.
  · The cutter pin and crimp pin use special steel (SK material) with optimal heat treatment for excellent durability.
  [Applications]
  · For drive chain replacement

  Standard Price:	4,955,048 IDR
  Days to Ship:	8 Day(s)

• 

  Service Creeper

  KTC(KYOTO TOOL)

  [Features]
  · It is a framework that does not interfere with shoulders and has a high-density cushion.

  • STOCK

  Standard Price:	974,110 IDR
  Days to Ship:	8 Day(s)

• 

  Service Creeper

  KTC(KYOTO TOOL)

  [Features]
  · It is a framework that does not interfere with shoulders and has a high-density cushion.
  · Makes holding difficult positions less tiresome by using a mechanism that allows the headrest angle to be adjusted to three different levels.

  • STOCK

  Standard Price:	2,229,231 IDR
  Days to Ship:	1 Day(s)

• 

  Service Creeper Caster

  KTC(KYOTO TOOL)

  [Features]
  · Service Creeper: Casters for AYSC-20F/20R.

  • STOCK

  Standard Price:	146,154 IDR
  Days to Ship:	1 Day(s)

• 

  Clip Connector

  KTC(KYOTO TOOL)

  [Features]
  · Replacement tip connector for tire air gauge AGT231 and AGT232.
  · Designed with clip for securing valves.

  Standard Price:	867,242 IDR
  Days to Ship:	12 Day(s) or more

• 

  Tire Air Gauge (Straight Connector)

  KTC(KYOTO TOOL)

  [Scope]
  · AGT231: Passenger cars, commercial vans, etc.
  · AGT232: Motorcycles, passenger cars, trucks, buses, etc.
  [Features]
  · Light operation lever enables fine adjustments to be performed smoothly.
  · Large gauge (ø70 mm) for easy reading of measurement values. Can perform pressure reduction and measurement without connecting an air hose.
  · Swivel joint prevents the hose from twisting.
  · Straight connector at the tip has an ultra-thin shape (11 mm tip) and is compatible with most aluminum wheels. (AGT231)
  · Double connector can be used for double tires (tire on outer side). (The double connector can be used with some inner side tires but may not be compatible depending on the shape of the wheel notches.) (AGT232)
  · Removable type with replaceable tip connector (optional)

  Standard Price:	3,459,273 IDR
  Days to Ship:	8 Day(s)

• 

  Tire Air Gauge (Double Connector)

  KTC(KYOTO TOOL)

  [Scope]
  · AGT231: Passenger cars, commercial vans, etc.
  · AGT232: Motorcycles, passenger cars, trucks, buses, etc.
  [Features]
  · Light operation lever enables fine adjustments to be performed smoothly.
  · Large gauge (ø70 mm) for easy reading of measurement values. Can perform pressure reduction and measurement without connecting an air hose.
  · Swivel joint prevents the hose from twisting.
  · Straight connector at the tip has an ultra-thin shape (11 mm tip) and is compatible with most aluminum wheels. (AGT231)
  · Double connector can be used for double tires (tire on outer side). (The double connector can be used with some inner side tires but may not be compatible depending on the shape of the wheel notches.) (AGT232)
  · Removable type with replaceable tip connector (optional)

  Standard Price:	3,459,273 IDR
  Days to Ship:	8 Day(s)

• 

  Rolling Wedge Bar

  KTC(KYOTO TOOL)

  [Features]
  · Multipurpose bar suitable for prying and expanding work.
  · The round shaft with ratchet enables this product to be used also for centering holes.

  Standard Price:	560,203 IDR
  Days to Ship:	Quote

• 

  Oil Drainer MIERU-KUN

  KTC(KYOTO TOOL)

  [Features]
  Supports both top-down draining and bottom draining.
  Clear cylinder allows the discharge state to be checked at a glance.
  Monitor the waste oil while interacting with customers.

  Standard Price:	21,479,232 IDR
  Days to Ship:	8 Day(s)

• 

  Compact Oil Drainer MOTERU-KUN

  KTC(KYOTO TOOL)

  [Features]
  Portable compact type dedicated to top-down draining.
  Handy for on-site maintenance.

  Standard Price:	9,998,584 IDR
  Days to Ship:	8 Day(s)

• 

  Coolant Charger

  KTC(KYOTO TOOL)

  No need to bleed air after charging coolant. Use for 2 fluids by switching tanks.
  
  [Applications]
  · Charging coolant into vehicles.
  [Scope]
  · Compatible with mini cars, ordinary passenger cars and 1.5 t class small trucks. (Optional cone plug L size adapter is required for some import vehicles.)
  [Features]
  · Quickly charge coolant without air mixing in.
  · Tank and body are detachable. The optional spare tank can be used to charge 2 types of coolant (red-based and green based).
  · There is no need to adjust input air pressure.
  · Switch between vacuuming and charging with the hand switch.

  Standard Price:	10,390,978 IDR
  Days to Ship:	8 Day(s)

• 

  Belt Hook Tool

  KTC(KYOTO TOOL)

  Use with belt tensioner wrench (ATE175) for easy replacement of auto tensioner type drive belt (single belt type).
  
  [Applications]
  · Replacement of engine belts, and the lifting and guiding of wiring and piping.
  [Scope]
  · Mainly V-belt and V-ribbed belt (7 ribs or more) in Japanese and imported passenger cars.
  [Features]
  · Hook with a round shaft removes the belt smoothly and prevents damage to the new belt.
  · Quickly replace single serpentine long belts, which are wide and difficult to change.
  · Long 660 mm length is effective for vehicles with a deep engine room, such as minivans.

  Standard Price:	336,817 IDR
  Days to Ship:	8 Day(s)

• 

  Belt Wrench Set

  KTC(KYOTO TOOL)

  [Applications]
  · Replacement and adjustment of air conditioning belts in Suzuki Wagon R [September 2008 and later] and MR Wagon [January 2006 and later]. (Belt wrench only)
  · Replacement and adjustment of air conditioning belts and power steering belts in Daihatsu Move [December 2008 and later] and Tanto [December 2007 and later]. (Belt wrench + dedicated socket)
  [Features]
  · The unique shape helps avoid obstacles, enabling smooth work motions.
  · Can be used for Daihatsu vehicle engines by using a dedicated socket.
  · Ratchet head adopted at the end, enabling effortless work.
  · Work time is shortened since only the number plate needs to be removed.
  · No need to remove the bumper when replacing belt.

  Standard Price:	1,272,042 IDR
  Days to Ship:	8 Day(s)

• 

  Belt Tensioner Wrench Set

  KTC(KYOTO TOOL)

  [Applications]
  · Use this dedicated tool to loosen the tensioner when replacing the belt in vehicles with auto tensioner type drive belts (single belt type).
  [Scope]
  · Effective for Japanese mini cars, ordinary passenger cars and especially for minivans (FF vehicles).
  [Features]
  · Thin, dedicated long swing ratchet is suited for environments working on vehicles with auto tensioners. Even in a confined engine room, a large swing motion is possible without interfering with pulleys and other obstacles.
  · Non-slip plastic grip is easy to grip and apply force, enabling easy work with damper type auto tensioners often used in FF vehicles with a high load.

  Standard Price:	2,006,160 IDR
  Days to Ship:	8 Day(s)

• 

  Crank Pulley Hold Plate

  KTC(KYOTO TOOL)

  [Applications]
  · Use this tool when holding or removing a pulley by fixing the plate with a crank pulley service tap and inserting the spinner handle, etc., into the square drive (12.7 sq.).
  · Compatible with crank pulleys with service taps.
  · Can loosen or tighten the lock bolt while preventing the pulley from turning together.
  · This tool can be used with AE-10.

  Standard Price:	2,226,614 IDR
  Days to Ship:	8 Day(s)

• 

  Crank Pulley Hold Wrench For Honda AE703

  KTC(KYOTO TOOL)

  [Applications]
  · Crank pulley stopper for Honda vehicles.
  * This tool cannot pull out crank pulleys.
  Use AE701 and AE702 (or CPU13) to remove the crank pulley.
  [Scope]
  · Crank pulley with 50 mm width across flats used for Honda vehicles.
  * Incompatible with some NSX models having 45 mm width across flats.
  * Incompatible with older Life models having 30 mm or smaller work space.

  Standard Price:	1,460,342 IDR
  Days to Ship:	8 Day(s)

• 

  Crank Pulley Puller (Hydraulic Type)

  KTC(KYOTO TOOL)

  [Features]
  · Hydraulic type enables stronger force.
  · The remote operation eliminates the need to rotate drive tools in a confined engine room, making work easier.
  [Applications]
  · For removing crank pulley.
  * AE701 and CPH1 are required to remove crank pulleys.
  * *Repair parts are available. Ask the retailer for details.

  Standard Price:	4,118,463 IDR
  Days to Ship:	8 Day(s)

• 

  Cam Pulley Hold Wrench

  KTC(KYOTO TOOL)

  [Applications]
  · Tool dedicated for stopping cam pulleys.
  [Scope]
  · Pinhole type cam pulley
  · Star-shaped cam pulley
  [Usage]
  · Select 1 of 2 types of pin (straight or flanged) according to the cam pulley shape and attach to arm.
  · Contact the pin against the cam pulley, fix rotation and loosen or tighten bolt with wrench, etc.
  [Features]
  · Arm opens and closes with a spring mechanism, and stability is improved by applying constant tension in the opening direction.
  · 2 types of stopper pins support 2 types of cam pulleys.
  · The knurled grip is easy to grip and apply force.

  Standard Price:	844,402 IDR
  Days to Ship:	8 Day(s)

• 

  Cam Pulley Lock Tool

  KTC(KYOTO TOOL)

  Will securely lock the cam pulley.
  Supports smooth replacement of the timing belt.
  
  [Applications]
  · This dedicated tool secures 2 cam pulleys and prevents deviation when replacing the timing belt for a DOHC gasoline engine.
  [Scope]
  · Japanese mini cars and regular passenger cars with DOHC gasoline engines (FF, FR vehicles).
  · When using with cam pulleys having a wavy inner shape that are used in some Honda and Mitsubishi vehicles, the pulley may move if external force is applied when the tool is attached.
  · May not be mountable on vehicles that are equipped with a variable valve timing function since they have a different shape.
  [Features]
  · When replacing the timing belt, set before removing the belt to secure the cam pulley position until work is completed.
  · Easily mount by operating the knob.
  · The offset center bolt ensures space for removing and attaching the timing belt.
  · Can be used for vehicles having obstacles between 2 cam pulleys.

  Standard Price:	829,056 IDR
  Days to Ship:	8 Day(s)

• 

  12.7 Sq. Head Bolt Wrench

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for tightening and loosening the head bolt when removing or mounting the engine cylinder head.

  Standard Price:	244,952 IDR-
  Days to Ship:	8 Day(s) or more

• 

  12.7 sq. Head Bolt Socket Wrench

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for tightening and loosening the head bolt when removing or mounting the engine cylinder head.
  [Features]
  · Has a hexagon rod made of special spring steel to ensure outstanding durability.
  · Compatible with 8 mm and 10 mm cap screw bolts (hex socket bolts).

  Standard Price:	180,767 IDR-
  Days to Ship:	8 Day(s)

• 

  12.7 Sq. Head Bolt Socket Wrench Set HB352

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for tightening and loosening the head bolt when removing or mounting the engine cylinder head.
  [Features]
  · Has a hexagon rod made of special spring steel to ensure outstanding durability.
  · Compatible with 8 mm and 10 mm cap screw bolts (hex socket bolts).

  Standard Price:	345,530 IDR
  Days to Ship:	8 Day(s)

Loading...