IDEC Other Switches

• 

  HS6E Safety Switch with Solenoid

  IDEC

  A safety switch with small solenoids at five built-in contact points.
  [Features]
  ・ External dimensions are 75 × 15 × 75 mm
  ・ Reversible mounting of switch body and diagonal cable pull-out support 4 patterns of actuator pushing directions
  ・ The HS6E mode's current consumption is 24 V DC 110 mA (solenoid 100 mA, LED 10 mA) to save energy. It can be driven directly from the controller
  ・ Manual unlocking can be operated from 3directions: both mounting surfaces and the actuator insertion direction
  ・ With an LED indicator light that allows the operating status of the solenoid to be visually recognized in a wide viewing angle
  〈Spring lock type〉
  ・ Automatically locks the actuator without power supply to the solenoid
  ・ High safety to unlock the machine by solenoid operation by an electric signal from the controller, etc., after the machine stops inertial operation
  ・ In case of power failure or maintenance, it can be unlocked by manual unlocking from 3 directions
  〈Solenoid lock type〉
  ・ Lock the actuator by applying voltage to the solenoid from the controller, etc.
  ・ Unlocked by removing voltage to solenoid
  ・ When there is no need to lock for safety reasons, it is possible to realize a lock function compatible with production convenience, such as preventing equipment from sudden stop

  Standard Price:	3,927,171 IDR-
  Days to Ship:	8 Day(s) or more

• 

  HS1L Safety Switch with Solenoid

  IDEC

  Ideal for large and heavy doors and doors that require strong lock strength.
  [Features]
  ・ The actuator is shared with the HS1E type (lock strength 3,000 N) type
  ・ With 6 contacts built-in, the external dimensions and mounting dimensions are the same as model HS1E. External dimensions are 35 mm × 104 mm × 129 mm
  ・ The open/closed state and the locked state of the door can be monitored separately to meet a variety of needs
  ・ By improving the solenoid unit, current consumption is reduced by approx. 32% and energy saving is achieved (Comparison with HS1E type)
  ・ Equipped with manual unlock key and indicator light (LED) as standard
  ・ With the manual unlock key, you can unlock manually in case of power failure or maintenance
  ・ The indicator light is an independent circuit and can be used for any purpose
  ・ Two types of lock mechanisms are available: a spring lock type that unlocks when the solenoid is excited, and a solenoid lock type that locks when the solenoid is excited
  ・ M3 terminal screw is used for the wiring part
  ・ It can be used in a wide range of operating temperatures from -20 to +55°C

  Standard Price:	3,535,173 IDR-
  Days to Ship:	9 Day(s) or more

• 

  HS7A-DMC Type Non-Contact Safety Switch

  IDEC

  Small-sized and easy to position in place during installation.
  Supports up to Category 4 (EN ISO 13849-1) in combination with a dedicated safety relay module
  [Features]
  ・ Small size (External Dimensions: 7 mm × 16 mm × 51 mm)
  ・ Easy alignment during installation work
  ・ Up to 36 sets can be connected (Safety Relay Module: When using HR1S-DME type)
  ・ IP67 protective structure

  Standard Price:	1,484,372 IDR-
  Days to Ship:	8 Day(s) or more

• 

  HS5D Type Safety Switch

  IDEC

  An operational-head removal detection function ensures extra safety.
  [Features]
  ・ Equipped with "operational-head detachment detection function" that turns off the main circuit (11-12) when the operation head is removed
  ・ Same contact size as 2-contact type (HS5B type), dual contacts + 3 contacts for monitoring
  ・ Small size that can be installed in a narrow space (30 × 30 × 91 mm)
  ・ Actuator is common with HS5B/5E
  ・ Double insulation structure that does not require earth wiring
  ・ Eight patterns of actuators can be inserted by changing the mounting direction of the operational-head section, supporting various mounting
  ・ IP67 (IEC60529) protective structure for contacts
  ・ NC contact has a direct opening function (IEC／EN60947-5-1)
  ・ Dedicated actuator prevents invalidation (ISO14119, EN1088)
  ・ M3 terminal screw improves wiring
  ・ It uses gold-plated contacts for micro-loads

  Standard Price:	424,367 IDR-
  Days to Ship:	8 Day(s) or more

• 

  HS1B/2B Type Safety Switch

  IDEC

  Turns machines off if protective door opens.
  
  [Features]
  · Turns machines off if protective door opens.
  · Switch unit is separate from the actuator, letting you install the switch in the machine and the actuator by the door for safe, protective safety-guard detection.
  · IP67 (IEC60529) protective construction on the contacts.
  · NC contacts feature direct opening function (IEC/EN60947-5-1).
  · Dedicated actuators prevent deactivation (ISO14119/EN1088).
  · Mount on safety guards to detect intrusion into danger zones.
  · Actuator can be inserted from two directions.
  · Conduit openings in 3 places allow for wiring from 3 directions.
  · HS1B type is made of solid diecast aluminum.
  · HS2B type is made of plastic.

  Standard Price:	861,300 IDR-
  Days to Ship:	8 Day(s) or more

• 

  HE5B Type Enable Switch【1-10 Pieces Per Package】

  IDEC

  ø16 hole mounting with round operation type that is easy to install.
  A 2-contact 3-position switch, useful as a small teach pendant.
  [Features]
  ・ Ergonomically based hazard avoidance OFF, to ON, to OFF, 3-position operation
  ・ Position 1 to 2 has a built-in snap action switch for easy operation and easy identification of position 2
  ・ Heavy and reliable operation from position 2 to 3
  ・ Considering long-time operation by reducing the holding force at position 2
  ・ Prepare a grip switch housing for use as a grip switch
  ・ Turn off by pushing (position 3): Structure that does not turn on while it is off (position 1) (IEC60204-1:9.2.5.8, IEC60947-5-8:7.1.9)
  ・ Built-in 3 position switch 2 contacts enables duplication for safety
  ・ Compliant with waterproof structure (IP65)

  Standard Price:	923,407 IDR-
  Days to Ship:	8 Day(s) or more

• 

  HE2B Type Enable Switch

  IDEC

  A multi-contact 3-position switch, useful as a large teach pendant. Rectangular mount (for 4 fingers)

  Standard Price:	923,407 IDR-
  Days to Ship:	16 Day(s) or more

• 

  HE3B Type Enable Switch

  IDEC

  A multi-contact 3-position switch, useful as a small teach pendant. ø16 with round hole (supports thumb or 3 fingers)

  Standard Price:	923,407 IDR
  Days to Ship:	8 Day(s) or more

• 

  HS6B Type Safety Switch

  IDEC

  [Features]
  ・ External dimensions are 30 mm × 15 mm × 78 mm
  ・ Corresponding to a high safety category with a total of 3 contacts including dual contacts and monitor contacts (ISO13849-1, EN954-1)
  ・ The actuator push port can be selected in either of 2 directions
  ・ Cable draw-out type that does not require wiring
  ・ Switch body can be installed reversibly
  ・ In addition to the IP67 (IEC60529) protective structure of the contact part, the water drain structure is adopted for the operation part to reinforce the water countermeasure
  ・ NC contact has a direct opening function (IEC／EN60947-5-1)
  ・ Dedicated actuator prevents invalidation (ISO14119, EN1088)

  Standard Price:	833,434 IDR-
  Days to Ship:	8 Day(s) or more

• 

  HE1B Type Enable Switch【10 Pieces Per Package】

  IDEC

  A 3-position switch suited for avoiding danger during emergencies. Best used as an enable switch installed inside teach pendants, etc. for robots and machinery.
  
  [Features]
  · Ergonomic 3-position OFF-ON-OFF control to prevent accidents.
  · Pushing down to switch from ON to OFF uses a direct opening function (EN60947-5-1/IEC60947-5-1 appendix K).
  · Push down to turn OFF (position 3), remove to turn OFF (position 1). It will not turn off in between (IEC60204-1: 9.2.5.8, IEC60947-5-8: 7.1.9).
  · Small, lightweight, and highly reliable.

  Standard Price:	8,779,467 IDR-
  Days to Ship:	9 Day(s) or more

• 

  HE1G-L Type Grip Switch

  IDEC

  Firmly confirm 3 positions with a clear click feeling.
  Realized a weight reduction holding load suitable for long-term use.
  [Features]
  ・ OFF, to ON, to OFF, 3-position operation to avoid danger
  ・ Turn off by pushing (position 3): Structure that does not turn on while it is off (position 1) (IEC60204-1:9.2.5.8, IEC60947-5-8:7.1.9)
  ・ Built-in 3 position switch 2 contacts enables duplication for safety
  ・ Monitor switch has a direct opening function
  ・ You can firmly confirm the transition from position 1 to position 2 and position 2 to position 3 by clicking
  ・ By reducing the weight of the holding load, the burden on the operator during long-term use has been reduced
  ・ Equipped with a push-button switch for emergency stop and a momentary push-button switch
  ・ Wiring method can be selected from terminal block type and internal connector type with wire saving
  ・ It achieves waterproof structure IP66 (HE1G-L21SM type only)
  ・ It can be used for ANSI robot standard applications
  ・ Built-in HE2B type enable switch

  Standard Price:	4,799,166 IDR
  Days to Ship:	16 Day(s) or more

• 

  HE2G Type Grip Switch

  IDEC

  Compact, lightweight grip switch that fits in your hand. Duplexed construction for safety.
  
  [Features]
  · HE2G type features an IEC/EN60947-5-8-certified HE2B enable switch (3-position switch).
  · A full lineup of types with control switches suited for a variety of applications.
  · Internal connector and solder-terminal types available to save on internal wiring.
  · Ergonomic grip shape that fits right in your hand for light, easy control.
  · Lightweight (approx. 140 g, HE2G-21SH type), compact size, and easy to hold even for those with small hands, making it useful in smaller work areas.
  · Lighter operational load on position 2 (ON) reduces the burden during long work sessions.
  · When moving from position 1 (OFF) to position 2 (ON), the switch requires approximately 50% of the HE1G grip switch's load when moving and staying in position.
  · The 3 positions can be clearly felt with light, tactile clicks, making it easy to go from position 1 (OFF) to position 2 (ON).
  · The actuator, which uses button control to turn the enable contact ON/OFF, is duplexed using a unique feature.
  · Use with a safety module or safety controller to detect discrepancies in 2 contact points, providing category-4 error detection.

  Standard Price:	3,946,790 IDR
  Days to Ship:	16 Day(s) or more

• 

  HE6B Type Enable Switch【1-10 Pieces Per Package】

  IDEC

  A 3-position enable switch with monitor contacts; the smallest class in the world. Duplexed construction for safety.
  
  [Features]
  · Ergonomic 3-position OFF-ON-OFF control to prevent accidents.
  · Push down to turn OFF (position 3), remove to turn OFF (position 1). It will not turn ON in between.
  · IEC60204-1 (2005): 10.9, IEC60947-5-8 (2006): 7.1.9.
  · Monitor switch can detect difference between to OFF when button is up (position 1) and OFF when button is pushed down (position 3) (monitor switch uses direct opening function).
  · Includes 2 contact points for circuit redundancy.
  · Includes rubber cover for an IP65 waterproof construction.

  Standard Price:	928,871 IDR-
  Days to Ship:	16 Day(s) or more

• 

  HS5L Type Safety Switch With Solenoid (4-Contact Type)

  IDEC

  [Features]
  ・ Built-in 2 to 4 contacts while it is space saving, 2 contact type is ideal for category 2 applications such as food machines and injection molding machines
  · Compact and slim. It fits small doors and machines with commercially available aluminum extrusions, etc. Built-in 2 contacts while it is space saving, the degree of freedom in design is greatly expanded
  ・ It achieves a lock strength of 1,400 N despite its small size, and has a function to detect when the operation head comes off: It is equipped with an "operation head detachment detection function" that turns off the lock monitor circuit (41-42) when the operation head is removed, such as when changing the mounting direction of the operation head (installed in HS5L type spring lock type)
  ・ Wiring is a spring type terminal block to prevent loosening due to vibration
  ・ It adopts gold-plated contacts for minute loads
  ・ Two types are available: a spring lock type that unlocks when the solenoid is excited, and a solenoid lock type that locks when the solenoid is excited
  ・ Eight patterns of actuators can be inserted by changing the mounting direction of the head part, supporting flexible mounting positions
  ・ Actuators can be selected according to the shape of the door and the application

  Standard Price:	2,989,325 IDR
  Days to Ship:	8 Day(s) or more

Loading...