DAINISHO Woodworking Drill Cutters

• 

  Woodworking Drill Bit, Ultra-Hard Tungsten Carbide

  DAINISHO

  [Features]
  · Enables joint processing for both male and female with 1 unit.
  · Use the accessory straight guide for the trimmer/router.

  Standard Price:	689,231 IDR
  Days to Ship:	8 Day(s) or more

• 

  Woodworking Drill Bit, Easy Nick Bit

  DAINISHO

  [Features]
  · Cut particle board and thick plywood in two with the single-sided nick blade (rough cut type).
  · Using the single-sided nick blade enables difficult-to-cut materials, such as particle board, plywood and laminated wood, to be drilled precisely and with a light touch.
  · Excellent scrap discharge enables quiet cutting.

  Standard Price:	752,308 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Corner bit, horizontal groove bit

  DAINISHO

  [Features]
  · For groove machining of window frames and wooden flooring.
  · Ideal for glass grooves and board grooves in fixtures and furniture.
  · The bearings serve as guides when grooving the rounded part of the arch, making grooving easy.
  · Capable of grooving with the frame assembled when increasing the groove width (when replacing glass or plywood with a heavy material, etc.).
  · Grooving of flooring is possible in combination with jointing male bits (4.5 x 6.5 or 6 x 8).

  Standard Price:	1,246,154 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Corner bit, cove surface

  DAINISHO

  [Features]
  · Blade for decorative surfaces and chamfering of wood materials and resin materials (artificial marble).

  Standard Price:	1,324,615 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Woodworking Drill Bit, Ultra-Hard Straight Bit

  DAINISHO

  [Features]
  - For drilling, grooving, cutting, and as the tip of a stair ruler.
  ・The high-speed rotating blade allows for a very clean finish on woodwork and the bottom surface.
  ・Useful as the cutting edge of each manufacturer's graded ruler.
  ・Hinge bit 6 x 8 x 35 ideal for one-shot processing of hinge drilling.

  Standard Price:	450,087 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Woodworking Drill Bit, Ultra-Hard Slit Straight Bit

  DAINISHO

  [Features]
  · Solid carbide, break-resistant.
  · Made from solid carbide, making it more rigid and break-resistant than a carbide straight bit.
  · Ideal for thin grooving and cutting out.

  Standard Price:	577,950 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Woodworking Drill Bit, U Channel Bit

  DAINISHO

  [Features]
  · For slip prevention on sliding door grooves and stairs.

  Standard Price:	1,024,615 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Corner bit, roundover surface

  DAINISHO

  A lightweight, rigid plastic board with a 3-layer structure that sandwiches air.
  
  [Features]
  · For decorative surface/chamfering/joining.

  Standard Price:	934,515 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Corner bit, beading surface

  DAINISHO

  Blade for decorative surfaces and chamfering of wood materials and resin materials (artificial marble).
  
  [Features]
  · For decorative surface/chamfering/joining.

  Standard Price:	1,324,615 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Corner bit, corner surface

  DAINISHO

  [Features]
  · For Decola and veneer chamfering.

  Standard Price:	1,110,769 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Corner bit, chamfering w/ mushroom

  DAINISHO

  [Features]
  · For Decola and veneer chamfering.
  · Included flange provides longer bearing service life.

  Standard Price:	859,639 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Woodworking Drill Bit, Ultra-Hard 2 Stage (Double-sided) Flush Bit

  DAINISHO

  [Features]
  · Cuts 2 plates in a single action.
  · It can cut out 2 boards, such as doors, in one go.
  · If the core material is thin, use 12 x 12 x G5 with narrow guide (G).

  Standard Price:	673,846 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Deep Cutting Bit

  DAINISHO

  [Features]
  · The blade reaches the core, so scooping, cutting out, and groove cutting are possible.
  · A variety of sizes are available to accommodate any application.
  [Applications]
  · Work material: Wood.
  [Specifications]
  · Electric Tools Used: NC Router, Router
  [Material]
  · Blade Tip: Carbide

  Standard Price:	1,083,077 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Corner bit, straight w/ guide bearing

  DAINISHO

  [Features]
  ・Anyone can easily chamfer Decora, plywood, wood, plastic, artificial marble, etc., and the finished product is beautiful.
  ・Bearings serve as guides for curves, straight lines, inside, outside, and corners. You can freely chamfer
  ・Please select the most suitable blade according to the processing purpose
  [Applications]
  ・Work material: wood
  ・Chamfering, joint cleaning, cutting out, hole drilling , for various work such as ant (male and female) processing.

  Standard Price:	670,769 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Flexible Groove Cutter AJ120W21 Series

  DAINISHO

  Functional economical version. 30-flute / Double-side polished. It has 18 mm width and a flat bottom.
  
  [Features]
  · For grooving, rabbeting, etc. By turning the dial, machining is possible as desired.
  · Because the groove width can be flexibly changed by just turning the dial, there is no need for a lineup of cutters with a variety of blades.
  · The large number of blades means that polyvinyl plywood and decorative boards rarely nap up.

  Standard Price:	2,086,154 IDR
  Days to Ship:	8 Day(s) or more

• 

  Corner bit, ogee surface

  DAINISHO

  [Features]
  · Blade for decorative surfaces and chamfering of wood materials and resin materials (artificial marble).

  Standard Price:	1,324,615 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Corner bit, 2-stepped cove surface

  DAINISHO

  [Features]
  · Blade for decorative surfaces and chamfering of wood materials and resin materials (artificial marble).

  Standard Price:	1,406,154 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Corner bit, dovetail

  DAINISHO

  [Features]
  · Assembled without nails.

  Standard Price:	1,063,077 IDR
  Days to Ship:	8 Day(s) or more

• 

  Corner bit, grafting male bit

  DAINISHO

  [Features]
  ·Easy and clean chamfering is possible with the carbide tip
  ·The bearing serves as a guide, allowing free chamfering of curves, straight lines, inside, outside, and corners
  [Applications]
  ·Male processing of flooring

  Standard Price:	2,350,769 IDR
  Days to Ship:	8 Day(s) or more

• 

  Corner bit, joint removal

  DAINISHO

  [Features]
  ・Anyone can easily chamfer Decora, plywood, wood, plastic, artificial marble, etc., and the finished product is beautiful.
  ・Bearings serve as guides for curves, straight lines, inside, outside, and corners. You can freely chamfer
  ・Please select the most suitable blade according to the processing purpose
  [Applications]
  ・Work material: wood
  ・Chamfering, joint cleaning, cutting out, hole drilling , for various work such as ant (male and female) processing.

  Standard Price:	670,769 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Woodworking Drill Bit, V Channel Bit

  DAINISHO

  [Features]
  · For lettering and decorative engraving.

  Standard Price:	1,487,692 IDR
  Days to Ship:	8 Day(s) or more

• 

  Woodworking Bit, Baseboard Bit 6X46°

  DAINISHO

  [Features]
  · Safely measures the out-angle.

  Standard Price:	1,487,692 IDR
  Days to Ship:	8 Day(s) or more

• 

  Woodworking Drill Bit, Strong 1 Stage (Single Surface) Flush Bit

  DAINISHO

  [Features]
  · Heavy duty cutting flush material.
  · Highly rigid HSS material is used in the base metal section, and the product also supports heavy cutting such as for 2 x 4 window cutting.
  · The tip blade is an HSS blade and the cutting-out blade is a carbide external blade to facilitate smooth discharge of chips. Operation is faster compared to conventional products.

  Standard Price:	718,462 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Woodworking Drill Bit, Ultra-Hard 1 Stage (Single Surface) Flush Bit

  DAINISHO

  [Features]
  · For cutting out single surfaces of veneer, boards, etc.
  · If the core material is thin, use 6 x 6 x G5 with narrow guide (G).

  Standard Price:	673,846 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Flexible Groove Cutter AJ120 Series

  DAINISHO

  Functional economical version. 24-flute / Single-side polished
  
  [Features]
  · For grooving, rabbeting, etc. By turning the dial, machining is possible as desired.
  · Because the groove width can be flexibly changed by just turning the dial, there is no need for a lineup of cutters with a variety of blades.
  · The large number of blades means that polyvinyl plywood and decorative boards rarely nap up.

  Standard Price:	1,390,769 IDR
  Days to Ship:	11 Day(s) or more

Loading...