ASAHI SEIKO Bearing Units（Rolling Element Material：Stainless Steel）

• 

  Pillow Block Unit with Set Screws, Cylindrical Hole Shape, UCP

  ASAHI SEIKO

  Standard model number. Bearing box with a sturdy integrated structure and inserted bearing. Used with a wide range of transmission equipment. Cast iron series
  
  [Features]
  · Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
  · Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
  · Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
  · This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
  · Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
  · Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
  · Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
  · Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

  Standard Price:	186,676 IDR-
  Days to Ship:	8 Day(s) or more

• • On Sale Till 31/03/2025

  

  Diamond Flange Mount Unit, Cylindrical-Bore Type With Set Screws, UCFL Type

  ASAHI SEIKO

  [Features]
  · The bearing box is a diamond shape mounted with two bolts, so it can be used in any place and is simple to mount to machinery.

  • Volume Discount

  Standard Price:	186,220 IDR-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Insert Bearing with Set Screws and Cylindrical Hole Shape, UC Shape

  ASAHI SEIKO

  [Features]
  · Spherical outer diameter surface for alignment function. Two-layer sealed bearing that fixes to the shaft on one side of the wide inner ring with two hex socket head set screws.

  Standard Price:	140,621 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  Diamond Flange Mount Unit, Silver Series with Eccentric Wheel, Cylindrical Hole Shape, UFL

  ASAHI SEIKO

  [Features]
  · Smaller and more lightweight than conventional insert bearing units.
  Also, the bearing box is marked with a center mark for easy positioning.

  Standard Price:	182,344 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Take-Up-Type Unit, Cylindrical-Bore Type With Set Screws, UCT Type

  ASAHI SEIKO

  Can be used for belt and chain adjustments in areas where free movement of the shaft center is required.

  Standard Price:	270,804 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Round Flange Mount Unit with Spigot Joint and Set Screws, Cylindrical Hole Shape, UCFC

  ASAHI SEIKO

  [Features]
  · The bearing box mounting surface is fitted with a spigot joint which embeds itself in the partnered material, minimizing eccentricity during mounting for accurate positioning.

  Standard Price:	230,027 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Flange Mount Unit, Silver Series with Set Screws, Cylindrical Hole Shape, KFL

  ASAHI SEIKO

  [Features]
  · The bearing box is a diamond flange shape and can be mounted with two bolts, so it is optimal for space saving.

  Standard Price:	214,167 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond-Flanged Unit, Cylindrical-Bore Type With Set Screws, BFL Type

  ASAHI SEIKO

  The lightest bearing box of the cast iron diamond-flanged unit series, with a simple structure that combines bearings with rubber seals and is suitable for a transmission shaft with a relatively light load and medium to low speed.

  Standard Price:	214,167 IDR
  Days to Ship:	8 Day(s) or more

• 

  Pillow Block Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, UP

  ASAHI SEIKO

  [Features]
  · Smaller and more lightweight than conventional insert bearing units.
  · Also, the bearing box is marked with a center mark for easy positioning.

  • Volume Discount

  Standard Price:	190,856 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Pillow Block Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, MUP

  ASAHI SEIKO

  The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.
  
  [Features]
  · Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
  · Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
  · Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
  · This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
  · Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
  · Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
  · Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
  · Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

  Standard Price:	579,500 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Flange Mount Unit, Silver Series with Eccentric Wheel, Cylindrical Hole Shape, MUFL

  ASAHI SEIKO

  [Features]
  · The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.

  Standard Price:	513,387 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPH Type

  ASAHI SEIKO

  Pillow-type unit UCP200-type bearing box with raised center height.

  Standard Price:	327,346 IDR
  Days to Ship:	13 Day(s) or more

• 

  Ball Bearing Unit, Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPA Type

  ASAHI SEIKO

  A more compact bearing box than the pillow-type unit UCP200 type, with screw holes for mounting to suit areas with space restrictions.

  Standard Price:	277,188 IDR
  Days to Ship:	11 Day(s) or more

• 

  Steel Plate Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, BPP Type

  ASAHI SEIKO

  Combines a built-in bearing with a rubber seal in a simple double steel plate bearing box structure, making it suitable for a transmission shaft with a relatively light load and medium to low speed.

  Standard Price:	168,208 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Flange Mount Unit, Cylindrical-Bore Type With Set Screws, UCFA Type

  ASAHI SEIKO

  Diamond-flanged unit with bolt hole at one end on an arc to enable free adjustment of the shaft center when installing.

  Standard Price:	262,141 IDR
  Days to Ship:	17 Day(s) or more

• 

  Diamond-Flanged Unit, Cylindrical-Bore Type With Set Screws, BLFL Type

  ASAHI SEIKO

  The lightest bearing box of the cast iron diamond-flanged unit series, with a simple structure that combines bearings with rubber seals and is suitable for a transmission shaft with a relatively light load and medium to low speed.

  Standard Price:	195,111 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Steel Plate Round-Flanged Unit, Cylindrical-Bore Type With Set Screws, BPF Type CUCF

  ASAHI SEIKO

  Combines a built-in bearing with a rubber seal in a simple double steel plate bearing box structure, making it suitable for a transmission shaft with a relatively light load and medium to low speed.

  Standard Price:	178,240 IDR
  Days to Ship:	16 Day(s) or more

• 

  Take-Up Unit With Frame, Cylindrical-Bore Type With Set Screws, UCT200+WB Type

  ASAHI SEIKO

  Combines a take-up unit with a steel plate frame, and the adjustment bolts enable more flexible adjustment of the shaft center.

  Standard Price:	2,149,226 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Hanger Shaped Unit with Set Screws and Cylindrical Hole Shape, UCECH

  ASAHI SEIKO

  [Features]
  · The bearing box is fitted with screw holes for pipes, and designed to hang down from steel pipes mounted to conveyors. For this reason, it is appropriate for use as a bearing for screw conveyor hangers.

  Standard Price:	342,166 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Insert Bearing, Cylindrical-Bore Type With Set Screws, B Type

  ASAHI SEIKO

  Both surfaces are sealed with a rubber seal, and the width of the inner and outer rings are narrower than in a UC-type bearing.

  Standard Price:	132,114 IDR
  Days to Ship:	8 Day(s) or more

• 

  Insert Bearing, Cylindrical-Bore Type With Set Screws, UR Type

  ASAHI SEIKO

  Features a spherical outer diameter surface for alignment and a two-layer sealed bearing fixed to the shaft on one side of the wide inner ring with two hex socket head set screws.

  Standard Price:	213,579 IDR
  Days to Ship:	16 Day(s) or more

• 

  Insert Bearing, Stainless Steel Series with Set Screws, Cylindrical Hole Shape, MUC

  ASAHI SEIKO

  [Features]
  · Although the size is identical to the UC shape, the outer ring, inner ring, ball, slinger, and set screws are all made of stainless steel.

  Standard Price:	706,268 IDR
  Days to Ship:	11 Day(s) or more

• 

  Diamond-Flanged Unit, Cylindrical-Bore Type With Set Screws, UCFK Type

  ASAHI SEIKO

  Constructed with 3 mounting bolt holes on one side, and limitations on the mounting surface. Suitable for areas where it can be mounted only from one direction

  Standard Price:	262,141 IDR-
  Days to Ship:	8 Day(s) or more

Loading...