Diamond Cutters（Page4）

• 

  Dry Cutter, Diamond Saw Blade Series, Gold [Segment Cutter] 2557140001

  RESITON

  [Applications]
  · For cutting various construction materials such as concrete, bricks, stone materials, roof tiles and tiles.
  · The tip and the substrate were instantly welded with a laser beam, making the bonding strength extremely high and ensuring safety.
  · A long life and high performance cutter in which heat has only a minimal effect on the diamond abrasive grains, ensuring stable cutting performance.

  Standard Price:	751,074 IDR
  Days to Ship:	13 Day(s) or more

• 

  Low Noise Night For Cutting Reinforced Concrete

  SANKYO DIAMOND INDUSTRIAL

  · Same sharpness but with an added low-noise function
  · Improved long life performance
  [Features]
  · Its special substrate reduces noise and prevents the generation of harsh high-pitched frequencies during cutting.
  · Uses high strength diamonds with the diamond later increased by 30%. Features a tip height of 8 mm.
  · By employing a turbo tip (uneven tip), the contact surface area with the work material is minimal, the resistance on the tip reduced and the cutting ability improved.
  [Applications]
  · For cutting reinforced (10-mm rebar) concrete and granite.
  

  Standard Price:	1,265,730 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Small Cutter With Shaft For Tile Cutting

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  · A small-diameter cutter for minimal damage to the tile when cutting. Has an outstanding turning circle for small turns.
  [Applications]
  · For cutting tile seams.
  [SMAT-H compatible models]
  · HITACHI KOKI: 100 mm disk grinders, all models
  · RYOBI: G Series / RG Series
  [SMAT-M compatible models]
  · MAKITA: 9533 Series / GA403 Series
  · BOSCH: GWS Series / PWS Series
  

  Standard Price:	872,280 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Japan Kuroto (Pro) DX Silent For Cutting Asphalt & Concrete

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  ·Blade dedicated for road cutter
  ·A special substrate makes noise reduction during cutting and harsh treble
  ·A low noise function is added while maintaining the sharpness.
  [Applications]
  ·Cutting paved roads
  ·For cutting asphalt and concrete

  Standard Price:	3,839,274 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cup For Grinding, Spike 100

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  · The layered diamonds and aligned diamonds help reduce clogging.
  · The rubber-sandwiched substrate absorbs shock and reduces both noise and weight.
  · Contact on the base material is soft, reducing biting.
  [Applications]
  · Acrylic-based resin, urethane-based resin, silicone-based resin, other resin coated films in general, stucco, textured paint, adhesives, etc.
  

  Standard Price:	1,207,680 IDR
  Days to Ship:	8 Day(s) or more

• 

  Renovating Tool Line Cut V

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  · A screw-in type that is easily mountable to disk grinders and which ensures minimal line deviations when cutting.
  · The tip is V-shaped, giving it excellent cutting performance in cracks and improving working efficiency.
  [Applications]
  · For repairing concrete, mortar and cracks and for cutting grooves for injecting caulking material.
  

  Standard Price:	2,946,154 IDR
  Days to Ship:	8 Day(s) or more

• 

  diamond cutter platinum wave (dry type)

  NORITAKE

  [Features]
  · A high-quality type boasting excellent cutting sharpness and a clean finished cut surface.
  [Applications]
  · Concrete, mortar, granite, marble, general tile, general roof tile, etc.
  [Product specification]
  · Outer diameter (mm): 125
  · Insert height (mm): 7
  · Blade thickness (mm): 2.0
  · Hole diameter (mm): 22
  · Maximum number of rotations during operation (rpm): 12,200
  · Hole diameter of included ring (mm): 20
  · Dry type
  · Wave type
  · JAN code: 4962356700644
  · Trusco code: 783-7569
  · Weight: 250 g
  [Materials/Finish]
  · Base metal: tool steel
  · Insert: diamond abrasive grain etc.

  Standard Price:	1,472,308 IDR-
  Days to Ship:	Quote

• 

  Super Little Series Platinum Segment Type (dry type)

  NORITAKE

  [Features]
  · An all-rounder that delivers both in terms of sharpness and service life.
  [Applications]
  · Concrete, mortar, granite, marble, general tile, general roof tile, etc.
  [Product specification]
  · Outer diameter (mm): 128
  · Insert height (mm): 8
  · Blade thickness (mm): 2.0
  · Hole diameter (mm): 22.0
  · Maximum number of rotations during operation (rpm): 12,200
  · Hole diameter of included ring (mm): 20
  · Dry type
  · Segmented type
  · JAN code: 4962356700620
  · Trusco code: 783-7585
  · Weight: 250 g
  [Materials/Finish]
  · Base metal: tool steel
  · Insert: diamond abrasive grain, etc.

  Standard Price:	1,472,308 IDR-
  Days to Ship:	Quote

• 

  Goketsu With Flange

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  · Diagonal slit: Discharges cutting chips to prevent heat build-up and to maintain sharpness.
  · Short tip: Provides a heat dissipating effect and reduces the amount which the substrate shakes.
  · Diamond layer: The deeper slit grooves improve cutting chip discharge and sharpness.
  · Rounded edge: The tip edges are rounded to prevent chipping and to improve safety.
  [Applications]
  · For cutting reinforced (10-mm rebar) concrete, granite and blocks

  Standard Price:	1,557,270 IDR
  Days to Ship:	11 Day(s) or more

• 

  Die Master Diamond

  NORITAKE

  [Features]
  · Diamond wheel providing an extremely good cut.
  · Simultaneous grinding of ultra-hard materials + steel is no problem.
  · The high holding power of the abrasive grain results in a stable cut.
  · High elasticity adhesive is used to minimize abrasive grain sinking in, which provides a superior cut.
  · While ensuring a cut when machining ultra-hard materials, the structure which suppresses abrasive grain damage when machining steel makes it possible to simultaneously grind ultra-hard materials and steel.
  [Applications]
  · Plane grinding and cylindrical grinding for die quenched parts and plates

  Standard Price:	7,589,860 IDR-
  Days to Ship:	46 Day(s) or more

• 

  Die Master CBN

  NORITAKE

  [Features]
  · CBN resin wheel providing an extremely good cut.
  · The high holding power of the abrasive grain results in a stable cut.
  · High elasticity adhesive is used to minimize abrasive grain sinking in, which provides a superior cut.
  · There are specifications emphasizing the cut, and specifications emphasizing holding the angle. Wheels can be selected by the intended use.
  · This also allows grinding difficult-to-cut material such as powdered stainless steel.
  [Applications]
  · Plane grinding and cylindrical grinding for die quenched parts and plates

  Standard Price:	8,452,610 IDR-
  Days to Ship:	46 Day(s) or more

• 

  The Amazing Kenma-Kun For Concrete And Stone Substrates, Flange Type

  TAKEKAWA

  [Features]
  · Amazing performance. Flange type
  · Drastically reduces shock and vibration during grinding.
  · Dedicated for removing coatings
  · Long lasting type
  [Applications]
  · Removal of hard coatings, elastic films, textured paint, sheet adhesive, etc.

  Standard Price:	1,970,301 IDR
  Days to Ship:	11 Day(s) or more

• 

  The Amazing Kenma-Kun For Steel Plate And Concrete Substrates, Flange Type

  TAKEKAWA

  [Features]
  · Amazing performance. Flange type
  · Drastically reduces shock and vibration during grinding.
  · For removing coatings
  [Applications]
  · Removal of hard coatings, elastic films, textured paint, sheet adhesive, etc.

  Standard Price:	1,968,776 IDR
  Days to Ship:	11 Day(s) or more

• 

  The Amazing Cup, Flat Type

  TAKEKAWA

  [Features]
  · Gently contacts the grinding surface, making it ideal for smooth finishing and flat surface grinding.
  [Applications]
  · Grinding concrete, bricks, blocks and stone materials

  Standard Price:	2,036,442 IDR
  Days to Ship:	11 Day(s) or more

• 

  Diamond Cutter, Rim 105 mm

  EARTH MAN

  [Applications]
  · For groove cutting and general cutting of concrete, blocks, bricks and slate
  [Features]
  · Clean cut sections
  [Specification]
  · Outer diameter: 105 mm
  · Blade thickness: 2.1 mm
  · Hole diameter: ø20 mm (included ring: ø15 mm)
  · Maximum operating rotational speed: 14,500 min-1

  Standard Price:	114,333 IDR
  Days to Ship:	10 Day(s) or more

• 

  Diamond Cutter, Segment 105 mm

  EARTH MAN

  [Applications]
  · For groove cutting or general cutting of concrete, blocks, bricks and slate
  [Features]
  · Speedy cutting
  [Specification]
  · Outer diameter: 105 mm
  · Blade thickness: 1.8 mm
  · Hole diameter: ø20 mm (included ring: ø15 mm)
  · Maximum operating rotational speed: 14,500 min-1

  Standard Price:	114,333 IDR
  Days to Ship:	10 Day(s) or more

• 

  GT Diamond Cutter

  ARC GREATTOOL

  [Features]
  Lineup: A segmented type designed with an emphasis on speed (NDC-105S), A wave type designed with an emphasis on the cut section (NDC-105W); Outer diameter: 105 mm; Hole diameter: 20 mm (with 15-mm washer); Maximum rotational speed: 14,500 min-1
  [Applications]
  · Concrete, bricks, block, mortar, etc.

  Standard Price:	132,066 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Diamond Saw Blade

  BOSCH

  Standard Price:	1,881,077 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Brazing Diamond Saw Blade(Dry)

  LOBTEX

  Standard Price:	5,310,769 IDR
  Days to Ship:	12 Day(s)

• 

  Diamond Saw Blades Laser Welded Segments (Dry)

  LOBTEX

  Standard Price:	6,821,538 IDR-
  Days to Ship:	12 Day(s)

• 

  Ductile Ranger Diamond Cutter

  SAINTGOBAIN

  Standard Price:	4,529,385 IDR-
  Days to Ship:	12 Day(s)

• 

  Mini-Ranger Wild Multi Diamond Cutter

  SAINTGOBAIN

  Standard Price:	5,871,847 IDR-
  Days to Ship:	12 Day(s)

Loading...