Vehicle Maintenance Tools（Page7）

• 

  Tire Air Gauge (Double Connector)

  KTC(KYOTO TOOL)

  [Scope]
  · AGT231: Passenger cars, commercial vans, etc.
  · AGT232: Motorcycles, passenger cars, trucks, buses, etc.
  [Features]
  · Light operation lever enables fine adjustments to be performed smoothly.
  · Large gauge (ø70 mm) for easy reading of measurement values. Can perform pressure reduction and measurement without connecting an air hose.
  · Swivel joint prevents the hose from twisting.
  · Straight connector at the tip has an ultra-thin shape (11 mm tip) and is compatible with most aluminum wheels. (AGT231)
  · Double connector can be used for double tires (tire on outer side). (The double connector can be used with some inner side tires but may not be compatible depending on the shape of the wheel notches.) (AGT232)
  · Removable type with replaceable tip connector (optional)

  Standard Price:	3,409,344 IDR
  Days to Ship:	8 Day(s)

• 

  Fluid Tester

  KTC(KYOTO TOOL)

  Accessories: Syringe for fluid measurement, soft storage case (cloth)
  [Applications]
  · Measurement of coolant (LLC) freezing temperature (scale A / B)
  · Measurement of specific gravity of battery electrolytic fluid (scale C)
  [Features]
  · Measure just by placing some fluid on the prism surface and looking through the lens.
  [Measurement range]
  · Coolant (LLC): Ethylene - 0 to -55°C (minimum scale 5°C)
  Propylene: 0 to -50°C (minimum scale 5°C)
  · Battery fluid: 1.10 to 1.40 kg/e (minimum scale 0.01 kg/e)

  Standard Price:	3,039,320 IDR
  Days to Ship:	8 Day(s)

• 

  Rolling Wedge Bar

  KTC(KYOTO TOOL)

  [Features]
  · Multipurpose bar suitable for prying and expanding work.
  · The round shaft with ratchet enables this product to be used also for centering holes.

  Standard Price:	560,203 IDR
  Days to Ship:	12 Day(s)

• 

  Oil Drainer MIERU-KUN

  KTC(KYOTO TOOL)

  [Features]
  Supports both top-down draining and bottom draining.
  Clear cylinder allows the discharge state to be checked at a glance.
  Monitor the waste oil while interacting with customers.

  Standard Price:	21,264,833 IDR
  Days to Ship:	8 Day(s)

• 

  Compact Oil Drainer MOTERU-KUN

  KTC(KYOTO TOOL)

  [Features]
  Portable compact type dedicated to top-down draining.
  Handy for on-site maintenance.

  Standard Price:	9,898,315 IDR
  Days to Ship:	8 Day(s)

• 

  Coolant Charger

  KTC(KYOTO TOOL)

  No need to bleed air after charging coolant. Use for 2 fluids by switching tanks.
  
  [Applications]
  · Charging coolant into vehicles.
  [Scope]
  · Compatible with mini cars, ordinary passenger cars and 1.5 t class small trucks. (Optional cone plug L size adapter is required for some import vehicles.)
  [Features]
  · Quickly charge coolant without air mixing in.
  · Tank and body are detachable. The optional spare tank can be used to charge 2 types of coolant (red-based and green based).
  · There is no need to adjust input air pressure.
  · Switch between vacuuming and charging with the hand switch.

  Standard Price:	10,250,326 IDR
  Days to Ship:	8 Day(s)

• 

  Belt Hook Tool

  KTC(KYOTO TOOL)

  Use with belt tensioner wrench (ATE175) for easy replacement of auto tensioner type drive belt (single belt type).
  
  [Applications]
  · Replacement of engine belts, and the lifting and guiding of wiring and piping.
  [Scope]
  · Mainly V-belt and V-ribbed belt (7 ribs or more) in Japanese and imported passenger cars.
  [Features]
  · Hook with a round shaft removes the belt smoothly and prevents damage to the new belt.
  · Quickly replace single serpentine long belts, which are wide and difficult to change.
  · Long 660 mm length is effective for vehicles with a deep engine room, such as minivans.

  Standard Price:	346,977 IDR
  Days to Ship:	8 Day(s)

• 

  Belt Wrench Set

  KTC(KYOTO TOOL)

  [Applications]
  · Replacement and adjustment of air conditioning belts in Suzuki Wagon R [September 2008 and later] and MR Wagon [January 2006 and later]. (Belt wrench only)
  · Replacement and adjustment of air conditioning belts and power steering belts in Daihatsu Move [December 2008 and later] and Tanto [December 2007 and later]. (Belt wrench + dedicated socket)
  [Features]
  · The unique shape helps avoid obstacles, enabling smooth work motions.
  · Can be used for Daihatsu vehicle engines by using a dedicated socket.
  · Ratchet head adopted at the end, enabling effortless work.
  · Work time is shortened since only the number plate needs to be removed.
  · No need to remove the bumper when replacing belt.

  Standard Price:	1,288,302 IDR
  Days to Ship:	8 Day(s)

• 

  Belt Tensioner Wrench Set

  KTC(KYOTO TOOL)

  [Applications]
  · Use this dedicated tool to loosen the tensioner when replacing the belt in vehicles with auto tensioner type drive belts (single belt type).
  [Scope]
  · Effective for Japanese mini cars, ordinary passenger cars and especially for minivans (FF vehicles).
  [Features]
  · Thin, dedicated long swing ratchet is suited for environments working on vehicles with auto tensioners. Even in a confined engine room, a large swing motion is possible without interfering with pulleys and other obstacles.
  · Non-slip plastic grip is easy to grip and apply force, enabling easy work with damper type auto tensioners often used in FF vehicles with a high load.

  Standard Price:	2,006,160 IDR
  Days to Ship:	8 Day(s)

• 

  Crank Pulley Hold Plate

  KTC(KYOTO TOOL)

  [Applications]
  · Use this tool when holding or removing a pulley by fixing the plate with a crank pulley service tap and inserting the spinner handle, etc., into the square drive (12.7 sq.).
  · Compatible with crank pulleys with service taps.
  · Can loosen or tighten the lock bolt while preventing the pulley from turning together.
  · This tool can be used with AE-10.

  Standard Price:	2,203,105 IDR
  Days to Ship:	8 Day(s)

• 

  Crank Pulley Hold Wrench For Honda AE703

  KTC(KYOTO TOOL)

  [Applications]
  · Crank pulley stopper for Honda vehicles.
  * This tool cannot pull out crank pulleys.
  Use AE701 and AE702 (or CPU13) to remove the crank pulley.
  [Scope]
  · Crank pulley with 50 mm width across flats used for Honda vehicles.
  * Incompatible with some NSX models having 45 mm width across flats.
  * Incompatible with older Life models having 30 mm or smaller work space.

  Standard Price:	1,490,252 IDR
  Days to Ship:	8 Day(s)

• 

  Crank Pulley Puller (Hydraulic Type)

  KTC(KYOTO TOOL)

  [Features]
  · Hydraulic type enables stronger force.
  · The remote operation eliminates the need to rotate drive tools in a confined engine room, making work easier.
  [Applications]
  · For removing crank pulley.
  * AE701 and CPH1 are required to remove crank pulleys.
  * *Repair parts are available. Ask the retailer for details.

  Standard Price:	4,376,055 IDR
  Days to Ship:	8 Day(s)

• 

  Cam Pulley Hold Wrench

  KTC(KYOTO TOOL)

  [Applications]
  · Tool dedicated for stopping cam pulleys.
  [Scope]
  · Pinhole type cam pulley
  · Star-shaped cam pulley
  [Usage]
  · Select 1 of 2 types of pin (straight or flanged) according to the cam pulley shape and attach to arm.
  · Contact the pin against the cam pulley, fix rotation and loosen or tighten bolt with wrench, etc.
  [Features]
  · Arm opens and closes with a spring mechanism, and stability is improved by applying constant tension in the opening direction.
  · 2 types of stopper pins support 2 types of cam pulleys.
  · The knurled grip is easy to grip and apply force.

  Standard Price:	822,107 IDR
  Days to Ship:	8 Day(s)

• 

  Cam Pulley Lock Tool

  KTC(KYOTO TOOL)

  Will securely lock the cam pulley.
  Supports smooth replacement of the timing belt.
  
  [Applications]
  · This dedicated tool secures 2 cam pulleys and prevents deviation when replacing the timing belt for a DOHC gasoline engine.
  [Scope]
  · Japanese mini cars and regular passenger cars with DOHC gasoline engines (FF, FR vehicles).
  · When using with cam pulleys having a wavy inner shape that are used in some Honda and Mitsubishi vehicles, the pulley may move if external force is applied when the tool is attached.
  · May not be mountable on vehicles that are equipped with a variable valve timing function since they have a different shape.
  [Features]
  · When replacing the timing belt, set before removing the belt to secure the cam pulley position until work is completed.
  · Easily mount by operating the knob.
  · The offset center bolt ensures space for removing and attaching the timing belt.
  · Can be used for vehicles having obstacles between 2 cam pulleys.

  Standard Price:	835,849 IDR
  Days to Ship:	8 Day(s)

• 

  12.7 Sq. Head Bolt Wrench

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for tightening and loosening the head bolt when removing or mounting the engine cylinder head.

  Standard Price:	267,897 IDR-
  Days to Ship:	8 Day(s) or more

• 

  12.7 sq. Head Bolt Socket Wrench

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for tightening and loosening the head bolt when removing or mounting the engine cylinder head.
  [Features]
  · Has a hexagon rod made of special spring steel to ensure outstanding durability.
  · Compatible with 8 mm and 10 mm cap screw bolts (hex socket bolts).

  Standard Price:	188,055 IDR-
  Days to Ship:	8 Day(s)

• 

  12.7 Sq. Head Bolt Socket Wrench Set HB352

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for tightening and loosening the head bolt when removing or mounting the engine cylinder head.
  [Features]
  · Has a hexagon rod made of special spring steel to ensure outstanding durability.
  · Compatible with 8 mm and 10 mm cap screw bolts (hex socket bolts).

  Standard Price:	353,923 IDR
  Days to Ship:	8 Day(s)

• 

  12.7 Sq. Head Bolt Wrench Set

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for tightening and loosening the head bolt when removing or mounting the engine cylinder head.

  Standard Price:	649,292 IDR
  Days to Ship:	8 Day(s)

• 

  19.0 Sq. Head Bolt Flywheel Wrench Set

  KTC(KYOTO TOOL)

  [Applications]
  ·Dedicated wrench used to attach and detach engine cylinder head bolts and flywheel bolts

  Standard Price:	2,630,165 IDR
  Days to Ship:	8 Day(s)

• 

  9.5 Sq. Triple Square Bit Socket

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated bit used for triple square bolts with socket heads used in European vehicles. These bolts are used commonly in the drive shaft flanges and undercarriage of Volkswagen and Audi vehicles, etc.
  · The end bit is replaceable.

  Standard Price:	331,684 IDR
  Days to Ship:	8 Day(s)

• 

  Carburetor Screwdriver Set

  KTC(KYOTO TOOL)

  · Screwdrivers for making adjustments.

  Standard Price:	565,721 IDR
  Days to Ship:	8 Day(s)

• 

  Carburetor Screwdriver (Flat)

  KTC(KYOTO TOOL)

  · Screwdrivers for making adjustments.

  Standard Price:	279,968 IDR
  Days to Ship:	11 Day(s) or more

• 

  Oil Pan Seal Cutter

  KTC(KYOTO TOOL)

  [Applications]
  · Use to cut sealing packing when removing oil pans.
  [Features]
  · Arc-shaped cutter can be driven into the seal section.
  · The side cutter has a sharp angle and fits well against the base when driven in from the side, enabling movement.
  · The cutter shape, large striking edge and removable handle enable work to be performed safely.
  · Remove handle to work in confined places and remove oil pans easily.

  Standard Price:	924,625 IDR
  Days to Ship:	8 Day(s)

• 

  Engine Mechanical Hanger Compatible With Impact Absorbing Body

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for holding automotive engine.
  [Scope]
  · Compatible with engines for FF lightweight to ordinary vehicles.
  　(Excluding vehicles that does not have fender, strut tower or front support installation bolt, trucks and minivans)
  · Maximum usage load: 2,450 N (250 kgf) or less
  [Features]
  · Compatible with impact absorbing bodies commonly adopted in recent vehicles.
  · This tool can be set stably and parallel to the ground even if the fender is inclined or tilted downward.
  · Compatible with models having short fender ribs that are not supported with conventional parts, or models in which tools cannot be set between fenders.
  · Vehicle can be moved or lifted up and down while the engine is held.
  · Because the bridge can be set in an inclined state, the hanger can be used with the bridge shifted from above the belt when replacing the belt, etc.
  · Utilizes backward type winch. Drive section can be switched between left and right and moved to the desired position.
  · Winch can be operated remotely with a chain wheel even while the vehicle is lifted up.

  Standard Price:	14,241,497 IDR
  Days to Ship:	8 Day(s)

• 

  12.7 Sq. Drain Plug Socket

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for tightening and loosening mission and differential drain (filler) plugs used in Nissan and Subaru vehicles.
  [Scope]
  · Mainly for Nissan FF manual transmission vehicles (AC301-10)
  · Mainly for Nissan manual transmission, rear differential, Subaru 4WD vehicle rear differential (AC301-13)
  · Mainly for older Nissan FR manual transmission vehicles (AC301-17)
  [Features]
  · Adopted 12.7 sq. to support drain plugs tightened with a large torque.
  · Main body has a hexagon shape that can be used with a 24 mm offset wrench, etc.

  Standard Price:	179,260 IDR-
  Days to Ship:	8 Day(s) or more

• 

  12.7 Sq. Drain Plug Socket Set (3 Pc Set)

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for tightening and loosening mission and differential drain (filler) plugs used in Nissan and Subaru vehicles.
  [Scope]
  · Mainly for Nissan FF manual transmission vehicles (AC301-10)
  · Mainly for Nissan manual transmission, rear differential, Subaru 4WD vehicle rear differential (AC301-13)
  · Mainly for older Nissan FR manual transmission vehicles (AC301-17)
  [Features]
  · Adopted 12.7 sq. to support drain plugs tightened with a large torque.
  · Main body has a hexagon shape that can be used with a 24 mm offset wrench, etc.

  Standard Price:	561,560 IDR
  Days to Ship:	8 Day(s)

• 

  9.5 12.7 Sq. New Flex Extension Wrench

  KTC(KYOTO TOOL)

  [Features]
  · Has a 9.5 sq. swivel type tip.
  · Rotates smoothly within 40°.
  · [Applications]
  · Removing and installing clutch housing bolts.

  Standard Price:	1,453,228 IDR
  Days to Ship:	8 Day(s)

• 

  Pilot Bearing Bushing Puller

  KTC(KYOTO TOOL)

  [Applications]
  · Removing pilot bearing bushing on flywheels.
  [Features]
  · Compact, lightweight and easy to use. Improves workability.
  · Claws engage well and can be used for maintenance on vehicles.
  · Suitable for a wide variety of models.

  Standard Price:	1,939,643 IDR
  Days to Ship:	8 Day(s)

• 

  Multi Puller Set, AS301

  KTC(KYOTO TOOL)

  With this single set, the axles of respective manufacturers can be disassembled and assembled.
  [Features]
  ·This single set can be used for axle disassembly and assembly work
  ·Compatible with both types, one with the hub bearing on the inner side and the other with the hub bearing on the outer side
  ·Hydraulic press can be used, reducing work labor and work time
  ·Arms can be attached and detached with a fixed ball in a single-action
  ·The center bolt has a bearing, and the drive torque is light
  ·Compatible not only with the axle of FF cars, but also with the rear of FR cars and 4WD cars
  ·Wide range of applications for, besides axles, steering wheels, differential companion flanges, mission bearings and gears
  ·It can also be used to pull out various bearings and gears other than automobiles by interchanging the set content products
  [Applications]
  ·Mainly compatible with axles from FF light vehicles to ordinary passenger cars

  Standard Price:	16,635,420 IDR
  Days to Ship:	8 Day(s)

• 

  Snap Ring Pliers For Hub

  KTC(KYOTO TOOL)

  [Applications]
  · Mounting and removing snap rings used in the vehicle hub.
  [Scope]
  · Range of snap ring plier tip opening (minimum 10 mm to maximum 36 mm)
  [Features]
  · Features a step-less automatic locking mechanism. Can be locked at the desired position.
  · Just open the grip to unlock.
  · Easily replace only the claws.
  · Compatible with snap rings with holes, and types with notches on the inner side of the ring (Toyota).

  Standard Price:	1,067,984 IDR
  Days to Ship:	8 Day(s)

• 

  Tie Rod End Separator (Offset Type)

  KTC(KYOTO TOOL)

  [Applications]
  · Separation of tie rod end.
  [Features]
  · Tough design for increased power.
  · Rated output is set to 15 kN (1.5 t) and maximum output is set to 30 kN (3 t).
  · Supports a larger output compared to conventional part (KTC BJU-1945).
  · Highly durable design.
  · The offset shape increases durability.
  · Fits various models perfectly.
  · Range of opening: 16 mm to 50 mm
  · Suitable for tie rod ends used in mini cars to 3 L class automobiles.
  · Easy operation increases efficiency.
  · Mount and remove just by operating the thrust bolt.
  · Perform work easily with drive tools.
  · Adopted a 9.5 sq. square drive. Can hold reaction force with drive tools.
  · Comes with a "drop-prevention lanyard" for safety.

  • STOCK

  Standard Price:	2,369,074 IDR
  Days to Ship:	8 Day(s)

• 

  Tie Rod End Separator Claw

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Ball Joint Separator AS202A.

  Standard Price:	1,353,722 IDR
  Days to Ship:	8 Day(s)

• 

  Ball Joint Separator (Offset Type)

  KTC(KYOTO TOOL)

  [Applications]
  · Use to separate ball joints.
  [Features]
  · Tough design with 2.5 t rated output
  · Mount and remove just by operating the thrust bolt.
  · Perform work easily with drive tools.
  · Adopted a 9.5 sq. square drive. Can hold reaction force with drive tools.
  · Exchange claw and jaw depending on the work environment.
  · Comes with a "drop-prevention lanyard" for safety.

  • STOCK

  Standard Price:	4,905,370 IDR
  Days to Ship:	8 Day(s)

• 

  Pitman Arm Puller

  KTC(KYOTO TOOL)

  [Applications]
  · Removing pitman arms.
  [Features]
  · The heat-treated forged claw has outstanding durability.
  · Comes with a "drop-prevention lanyard" for safety.
  · The claws bite inward when the center screw is tightened.
  [Scope]
  · Pitman outer diameter ø37 to ø47

  Standard Price:	2,768,095 IDR
  Days to Ship:	8 Day(s)

• 

  Screw Size Conversion Adapter Set For Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Features]
  · Screw size conversion adapter set for Slide Hammer Puller AUD3.

  Standard Price:	465,181 IDR
  Days to Ship:	8 Day(s)

• 

  Drive Shaft Joint Puller Set For Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Features]
  · Drive shaft joint puller set for slide hammer AUD3.

  Standard Price:	2,038,273 IDR
  Days to Ship:	8 Day(s)

• 

  Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Applications]
  · Disassembly of vehicle undercarriage and processing of sheet metal.
  [Scope]
  · Mini cars, ordinary passenger cars and compact trucks.
  [Features]
  · Improved safety. New design concept helps prevent fingers from getting pinched accidentally.
  · A set of 2 types of hammers (large and small). 2 types of shocker (hammer) weights (3.5 kg and 1.2 kg) have been to specified to support a variety of work.

  Standard Price:	2,366,270 IDR-
  Days to Ship:	8 Day(s)

• 

  Hub Puller For Slide Hammer Puller (For 4 Holes / 5 Holes)

  KTC(KYOTO TOOL)

  [Applications]
  · Removing axle shafts, removing brake drums and extruding drive shafts.
  [Features]
  · This puller can be used for both 4 holes and 5 holes.
  · Features a 9.5 sq. square drive and a 27 mm width across flats, allowing rotation to be stopped with a drive tool or monkey wrench, etc.
  · Can be used with AUD4.

  Standard Price:	2,476,472 IDR
  Days to Ship:	8 Day(s)

• 

  Slide Hammer Puller Hub Puller (For 6 Holes)

  KTC(KYOTO TOOL)

  [Applications]
  · Removing axle shafts, removing brake drums and extruding drive shafts.
  [Scope]
  · 6-hole type hub for vehicles.
  [Features]
  · Deep hole design makes this product compatible with front free-wheeling hubs for 4WD vehicles.
  · Features a 12.7 sq. square drive and a 27 mm width across flats, allowing rotation to be stopped with a drive tool or monkey wrench, etc.
  · Can be used with AUD4.

  Standard Price:	1,865,357 IDR
  Days to Ship:	8 Day(s)

• 

  Boot Band Cutter

  KTC(KYOTO TOOL)

  [Applications]
  · Cutting drive shaft boot bands and cutting boots.
  [Scope]
  · Stainless steel boot bands for drive shaft in mini cars to passenger cars.
  · Rubber drive shaft boot.
  [Features]
  · Can cut the boot band while it is attached.
  　Boots can also be cut, enabling work to be completed quickly.
  · After cutting the band, the boot can be cut without exchanging tools.
  · The spring opens the jaws easily, and the stopper ensures compact storage.
  　Pressing the stopper while handles are gripped fixes the handles in a closed state for convenient storage.

  Standard Price:	809,482 IDR
  Days to Ship:	8 Day(s)

• 

  Snap Ring Pliers AS403A

  KTC(KYOTO TOOL)

  [Applications]
  · Use these pliers to remove (attach) snap rings that do not have a hooking hole.
  [Scope]
  
  · Normal type of snap ring with no hooking holes.
  · Thin claw tip is compatible even with rings having a narrow opening.
  
  · This tool is dedicated for snap rings that have a narrow opening and angled notches and are used in Honda vehicles
  · Claws are replaceable in the event of wear or damage.
  [Features]
  
  · Stepped tip shape increases stability when removing or attaching snap rings that were difficult to handle before.
  · Work from either above or from the side of the shaft.
  
  · Remove or attach Honda vehicle snap rings, which were difficult to handle before.

  Standard Price:	475,502 IDR
  Days to Ship:	8 Day(s)

• 

  Snap Ring Pliers AS403B

  KTC(KYOTO TOOL)

  [Applications]
  · Use these pliers to remove (attach) snap rings that do not have a hooking hole.
  [Scope]
  
  · Normal type of snap ring with no hooking holes.
  · Thin claw tip is compatible even with rings having a narrow opening.
  
  · This tool is dedicated for snap rings that have a narrow opening and angled notches and are used in Honda vehicles
  · Claws are replaceable in the event of wear or damage.
  [Features]
  
  · Stepped tip shape increases stability when removing or attaching snap rings that were difficult to handle before.
  · Work from either above or from the side of the shaft.
  
  · Remove or attach Honda vehicle snap rings, which were difficult to handle before.

  Standard Price:	475,497 IDR
  Days to Ship:	8 Day(s)

• 

  Drive Shaft Remover For Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Applications]
  · Removing the drive shaft from transaxles in FF vehicles.
  · This dedicated tool is used with slide hammer pullers (AUD3).

  Standard Price:	1,497,938 IDR
  Days to Ship:	8 Day(s)

• 

  Boot Band Tool With Cutter

  KTC(KYOTO TOOL)

  [Applications]
  · Tightening and cutting joint boot fixing bands for drive shafts.
  [Scope]
  · Outstanding boot bands used in mini cars to passenger cars. (Applicable for all sizes)
  [Features]
  · Ratchet mechanism enables efficient winding.
  · Bending to cutting boot bands performed in one action.

  Standard Price:	1,127,755 IDR
  Days to Ship:	8 Day(s)

• 

  Boot Band Tool

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for clamp type boot bands on drive shafts used in automobiles.
  [Scope]
  · Compatible with mini to passenger cars equipped with clamp type boot bands. (Compatible with import vehicles)
  [Features]
  · Clamp the boot band easily just by screwing in the center bolt.
  · Compatible with ratchet handle, etc., for quick operations using light force. (Hexagon width across flats 14 mm)
  · Center bolt is flanged so the wrench does not deviate even when using offset wrench.
  · Handle grip is made of non-slip plastic.
  · Clamping section adopted a claw shape that does not rise up.

  Standard Price:	2,076,275 IDR
  Days to Ship:	8 Day(s)

Loading...