Pullers

• 

  Three Arm Puller

  TEKIRO

  • Suitable for pulling hubs, flanges, gears, bearings as reduction type starter motor power tools, etc.
  • Made from high-strength forged and hardened steel 3 jaws design

  Standard Price:	138,400 IDR-
  Days to Ship:	Same day

• 

  Internal Extractor Set (12 to 40 mm)

  KUKKO

  [Features]
  A set of a slide hammer and die-cutting extractor
  

  Standard Price:	14,560,666 IDR
  Days to Ship:	11 Day(s) or more

• 

  Steering Puller

  TOP

  [Features]
  · It is used for correcting the inclination of the steering wheel after adjusting the front wheel alignment of the automobile.
  · Steering wheel can be securely removed without the use of a plastic hammer

  Standard Price:	598,000 IDR
  Days to Ship:	8 Day(s) or more

• 

  Bearing puller set BP15S/BP30S/BP30FS

  SUPER TOOL

  [Features]
  · Dedicated tool for removing inner bearing rings.
  · Internal jaws are chucked on the bearing's internal diameter, so after setting on the stand, the bearing can be removed simply by turning a nut

  • STOCK

  Standard Price:	4,921,231 IDR-
  Days to Ship:	1 Day(s)

• 

  Gear Puller (Sliding Type)

  TRUSCO NAKAYAMA

  [Features]
  · Flat transfer of the claw is smooth, which leads to greater efficiency.

  • STOCK

  Standard Price:	1,908,923 IDR-
  Days to Ship:	1 Day(s)

• 

  Gear Puller G/GT Common Parts (Hook)

  SUPER TOOL

  Parts for Gear Puller manufactured by Super Tool.
  · Expanded range of reach with the use of 2 or 3 holes, as well as upper and lower jaws.

  Standard Price:	2,384,462 IDR-
  Days to Ship:	Quote

• 

  Bearing Separator (BS1/2/4)

  SUPER TOOL

  Heavy duty type for professionals
  
  [Features]
  · G, GL type suitable for pulling out bearings and gears which have no gaps for claws

  • STOCK

  Standard Price:	2,296,154 IDR-
  Days to Ship:	1 Day(s) or more

• 

  2-Pronged Hydraulic Puller Set

  SUPER TOOL

  Gears, pulleys and the like that are stuck due to rust and seizure can be easily pulled out through hydraulic power.

  Standard Price:	34,422,462 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Bearing Puller

  TEKIRO

  • Easy to remove bearings
  • Fully adjustable jaws
  • Suitable for multiple bearings
  • Molybdenum materials

  Standard Price:	260,800 IDR-
  Days to Ship:	Same day or more

• 

  Miniature Bearing Puller Set

  TOP

  [Features]
  · System puller set for extracting small bearings, changing combinations in response to usage location.
  · Jaw and intermediate plate are forged and all parts are heat treated for excellent durability.
  · It uses powerful 30° trapezoidal push screws.
  · Usable with both inner and outer rings.
  · It can be used even in places where push screws cannot be used, and is capable of easy centering

  Standard Price:	4,316,333 IDR
  Days to Ship:	8 Day(s) or more

• 

  Gear Puller G/GL/GT Common Parts (Washer)【1-4 Pieces Per Package】

  SUPER TOOL

  Parts for Gear Puller manufactured by Super Tool.
  · GZ4 through 18 are common to G and GL

  • STOCK

  Standard Price:	56,615 IDR-
  Days to Ship:	1 Day(s)

• 

  Gear Puller G/GL/GT Common Parts (Bolt/Nut)【1-4 Pieces Per Package】

  SUPER TOOL

  Parts for Gear Puller manufactured by Super Tool.
  · GN4 through 18 are common to G and GL

  • STOCK

  Standard Price:	70,110 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Shock Speed Puller Part (Pin)

  SUPER TOOL

  SUPER TOOL CO., LTD. component (pin) for shock speed pullers.

  Standard Price:	150,284 IDR
  Days to Ship:	8 Day(s) or more

• 

  Ultra wide slide gear puller

  SUPER TOOL

  [Features]
  · The H dimension is the dimension with the male thread maximally pulled up.
  · Ideal for pulling out crank pulleys from cars, etc.
  · The claw is a slide style device, and a cap bolt makes for ideal placement fixing.

  Standard Price:	3,602,429 IDR
  Days to Ship:	12 Day(s)

• 

  Bearing Grip Puller Set (powerful pro type)

  SUPER TOOL

  [Features]
  · Ideal for pulling out bearings and gears which have no gaps for claws.
  · A puller set, optimal for extracting pulleys with large diameters.
  · Steel Case provided

  • STOCK

  Standard Price:	4,600,598 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Bearing Puller Set Parts (stand set)

  SUPER TOOL

  Parts for Bearing Puller Set manufactured by Super Tool (stand set).

  Standard Price:	773,100 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Bearing Puller Set (powerful pro type)

  SUPER TOOL

  [Features]
  · Dedicated tool set for removing inner/outer bearing rings.
  · Steel Case provided

  • STOCK

  Standard Price:	36,917,231 IDR
  Days to Ship:	1 Day(s)

• 

  Bearing puller set parts (inner claw) BPJ series

  SUPER TOOL

  Parts for Bearing Puller Set manufactured by Super Tool (internal claw).

  Standard Price:	2,524,571 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Gear Puller (3 Claws)

  SK 11

  This is a convenient puller for pulling out gears and pulleys from machines.
  [Features]
  · Enables the pulling out of gears/pulleys up to 100 mm in diameter.
  [Applications]
  · Pulling out the gear and pulley from the shaft of a machine.

  Standard Price:	589,372 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Internal Extractor

  KUKKO

  [Features]
  Ideal tool for removing ball bearings, ball races, sleeves, bushings, and more
  * This is a representative image. (21-6-E) Image may differ depending on the product.

  Standard Price:	1,385,503 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Separator 15 Series

  KUKKO

  [Features]
  For pulling out ball bearings, roller bearings, inner races and other fixed parts
  

  Standard Price:	2,262,664 IDR-
  Days to Ship:	11 Day(s) or more

• 

  11PC Bearing puller set

  ASTRO PRODUCTS

  [Features]
  · Puller set for removing internally mounted-type bearings.
  · Supports a wide range of diameters between φ8 and φ34 mm, allowing various work applications such as bicycle wheel bearings, water pump bearings, etc.
  · As it comes with a slide hammer, it is ideal for places where it is difficult to use hard bearings or the body.
  [Applications]
  · For various work, such as wheel bearings on two-wheeled vehicles, water pump bearings, etc.

  Standard Price:	4,371,282 IDR
  Days to Ship:	12 Day(s)

• 

  Magnetic Tracker Multi Function

  TEKIRO

  • Material: Chrome vanadium
  • Design to magnetic uninstall
  • Simple structure and easy to use
  • High durable and corrosion resistance

  Standard Price:	166,200 IDR-
  Days to Ship:	Same day

• 

  Gear Puller (2-Hook/3-Hook Dual Purpose Type)

  TRUSCO NAKAYAMA

  [Features]
  · Can be attached freely, with unique "hooks always close" mechanism.
  · Either 2 claws or 3 claws can be used separately to suit the application.

  • STOCK

  Standard Price:	47,692 IDR-
  Days to Ship:	1 Day(s) or more

• 

  3-Jaw Gear Puller

  TOP

  [Features]
  · When removing gears and pulleys, this applies pulling force evenly in 3 places so there is no need to worry about breaking or distorting parts. It also allows stable work to be performed.
  · Excluding GP3-75, there are two coupling holes on the claw that can be used to grasp wide gears and gears in deep places by changing the holes (GP3-75 is a one hole type).
  · GP3-100/GP3-150 can be used with 2 claws.
  · The push screw is a 30° fine trapezoidal screw for easy removal of gears and the like. It has a rational design and withstands heavy load

  • STOCK

  Standard Price:	1,138,308 IDR-
  Days to Ship:	1 Day(s)

• 

  Gear Puller GP Series

  TOP

  For pulling out gears, bearings, pulleys, etc.
  
  [Features]
  · Excluding GP-75, there are two coupling holes on the claw that can be used to grasp wide gears and gears in deep places by changing the holes (GP-75 is a one hole type).
  · The push screw is a 30° fine trapezoidal screw for easy removal of gears and the like. It has a rational design and withstands heavy load

  • STOCK

  Standard Price:	630,086 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Gear Puller G Type (Professional Heavy Duty Type)

  SUPER TOOL

  Adapter with steel ball (G4-G24) significantly reduces friction resistance.

  • STOCK

  Standard Price:	752,478 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Gear Puller GL Type (Professional Heavy Duty Type)

  SUPER TOOL

  [Features]
  · The H dimension is the dimension with the male thread maximally pulled up at the minimum D dimension.
  · Longer claw than G Type, with three holes enlarging the claw range.
  · One of the claws is designed to have a groove width for hook bolts (for BS).
  · Adapter with steel ball significantly reduces friction resistance

  • STOCK

  Standard Price:	1,819,488 IDR-
  Days to Ship:	1 Day(s)

• 

  Gear Puller GT Type (3-Hook Puller)

  SUPER TOOL

  A gear puller used for pulling pulleys.
  [Features]
  ·3 claws provide more stable load than 2 claws.
  ·Ideal for pulling out bearings, pulleys, gears, etc. in dismantling and repairing machinery and automobiles.
  ·By making the nail holes 2 holes (GT4-10) and 3 holes (GT12-18), the reach of the nail is expanded.
  ·GT100, 150, 200, 250, 12, 15 and 18 are exclusively for 3-jaw.
  ·Frictional resistance is greatly reduced by an adapter containing steel balls.
  ·The H dimension is the dimension when the D dimension is the smallest and the male thread is pulled up to the maximum.
  [Applications]
  ·Ideal for pulling out pulleys.

  • STOCK

  Standard Price:	1,742,462 IDR-
  Days to Ship:	1 Day(s)

• 

  Gear Puller G/GL/GT Common Parts (Adapter with Ball)

  SUPER TOOL

  Parts for Gear Puller manufactured by Super Tool.
  · Expanded range of reach with the use of 2 or 3 holes, as well as upper and lower jaws.

  • STOCK

  Standard Price:	237,385 IDR-
  Days to Ship:	1 Day(s)

• 

  Gear Puller GL Type Parts (Hook)

  SUPER TOOL

  Parts for Gear Puller manufactured by Super Tool.
  · Longer claw than GJ Type, with three holes enlarging the claw range.

  Standard Price:	533,528 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Gear Puller G/GL/GT Common Parts (Male Screw / Female Screw)

  SUPER TOOL

  Parts for Gear Puller manufactured by Super Tool.
  · GSR4 through 18 are common to G and GL
  · GSR 3 has no adapter

  • STOCK

  Standard Price:	561,077 IDR-
  Days to Ship:	1 Day(s)

• 

  3-Hook Gear Puller GT Type Parts (Male Screw/Female Screw, With Adapter)

  SUPER TOOL

  Parts for Gear Puller manufactured by Super Tool.
  · 3-hook gear puller GT type component.
  · Used with bolts, nuts and washers.

  Standard Price:	934,716 IDR
  Days to Ship:	12 Day(s) or more

• 

  Slide gear puller

  SUPER TOOL

  [Features]
  · Claws can slide in parallel, effective for work in a tight space.
  · Simply re-set the claw for inner or outer hanging, which are both available.
  · The claw placement can be fixed easily with the turn of a knob.
  · With GS-M, the claw can reach a wide range, with male screws of an appropriate length, so that efficient work can be carried out.
  · Ideal particularly for disassembling motors, etc.

  • STOCK

  Standard Price:	1,378,718 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Slide gear puller (long type)

  SUPER TOOL

  [Features]
  · Claws can slide in parallel, effective for work in a tight space.
  · Simply re-set the claw for inner or outer hanging, which are both available.
  · The claw placement can be fixed easily with the turn of a knob.
  · With GS-M, the claw can reach a wide range, with male screws of an appropriate length, so that efficient work can be carried out.
  · Ideal particularly for disassembling motors, etc.

  • STOCK

  Standard Price:	2,032,154 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Slide gear puller thin nail type

  SUPER TOOL

  The thin claws require less claw grip space and are effective in places where the conventional type could not be used.

  Standard Price:	1,539,857 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Slide gear puller thin nail type (long type)

  SUPER TOOL

  The thin claws require less claw grip space and are effective in places where the conventional type could not be used.

  Standard Price:	1,649,899 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Slide gear puller spare parts (thin nails)

  SUPER TOOL

  Parts for Gear Puller manufactured by Super Tool.
  · Parts for slide gear puller thin claw type.

  Standard Price:	206,986 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Gear Puller G Type Auto Grip Type

  SUPER TOOL

  [Features]
  · Because spring force is used to close the claw, it can be easily applied to the item being removed and features excellent workability.
  · Also, a GL long claw can be mounted, which widens the usage range further

  Standard Price:	837,286 IDR
  Days to Ship:	8 Day(s) or more

• 

  Gear Puller GT Type Auto Grip Type

  SUPER TOOL

  [Features]
  · Because spring force is used to close the claw, it can be easily applied to the item being removed and features excellent workability.
  · Also, a GL long claw can be mounted, which widens the usage range further

  Standard Price:	1,302,733 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Shock Speed Puller Set

  SUPER TOOL

  Heavy duty type for professionals
  
  [Features]
  · The H dimension is the dimension with the male thread maximally pulled up at the minimum D dimension.
  · Extraction ability comes to the fore with seized and rusted gears/pulleys, using a hammer action to provide an impact shock to male screw heads (a mechanism not found in other pullers). With steel case

  Standard Price:	4,585,183 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Shock Speed Puller Part (Stepped Auxiliary Adapter)

  SUPER TOOL

  Parts for Shock Speed Puller manufactured by Super Tool (supplementary adapter with step).

  Standard Price:	239,063 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Armature Bearing Puller

  SUPER TOOL

  [Features]
  · The H dimension is the dimension with the male thread maximally pulled up.
  · Ideal for pulling out small diameter bearings attached to electric tools, household appliances, cars, etc.

  • STOCK

  Standard Price:	764,769 IDR-
  Days to Ship:	Same day or more

• 

  Ultra wide thin nail slide gear puller

  SUPER TOOL

  [Features]
  · The H dimension is the dimension with the male thread maximally pulled up.
  · Ideal for pulling out pulleys or gears where there is a limited space to hook claws.
  · The claw is a slide style device, and a cap bolt makes for ideal placement fixing.
  · ABT90L is the long-claw type.

  • STOCK

  Standard Price:	2,397,265 IDR-
  Days to Ship:	1 Day(s)

• 

  Armature Bearing Puller Parts (Claw)

  SUPER TOOL

  Parts for Supertool's Armature Bearing Puller (claw).

  Standard Price:	287,100 IDR-
  Days to Ship:	8 Day(s) or more

Loading...