Deburring Tools（Product Type：Manual）

• 

  Chamfer/Deburring Tool, Bevel Tool Set

  NOGA JAPAN

  Chamfering/Deburring Tool, Deburring Tool Set
  It is a set product of a handle and blades.

  Standard Price:	180,697 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Chamfer/Deburring Tool, Rear Seat Gripper Set

  NOGA JAPAN

  This is a back facing bar set supporting small- to large-diameter holes.
  [Features]
  · A precision tool that removes burrs on the back and front of drill holes (RC1000).
  · Chamfering is done simply by holding the tool with your fingers and rotating left and right while pulling (or pushing) in the drilled hole.
  · For 3-5.5 mm holes. R1 blade included.
  · Standard size for deburring holes of 5-10 mm diameter. R2 blade included (RC2000).
  · Jumbo size for deburring holes of 10-22 mm diameter. R3 blade included (RC2200).
  [Applications]
  · Ideal for chamfering and deburring.

  Standard Price:	502,581 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Deburring Blade (Countersink)【1-10 Pieces Per Package】

  NOGA JAPAN

  The quickest and easiest method of chamfering by hand. Countersink is a single-blade type that's capable of uniform and clean chamfering.

  Standard Price:	140,010 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Chamfer/Deburring Tool, Scraper Set

  NOGA JAPAN

  Chamfering/Deburring Tool, Scraper Set
  It is one of the best tool for tool/mold manufacturers.

  Standard Price:	290,410 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Work Finisher

  YANASE

  Ideal for deburring hard molded plastic products containing materials such as glass, carbon fiber, talc, etc.
  
  [Features]
  · Ideal for deburring hard plastic molded products containing glass, carbon fiber, talc and the like, which was once difficult.
  · Also suitable for deburring and chamfering non-ferrous metals such as aluminum, brass, copper, etc.
  · As it does not have a blade, it is safer than conventional knives and will not cut the hand.
  · Since the blade is not sharp, deburring on the inner surface can be performed smoothly and there is no concern about cutting the mold too deeply.
  · Even beginners can create a beautiful finished surface

  Standard Price:	792,923 IDR
  Days to Ship:	12 Day(s)

• 

  Shaviv Mango II, With Two Types of Blades: B10 for Straight Lines and B20 for Curved Lines

  SHAVIV

  A popular classic set for a wide range of purposes. Equipped with 2 blades: B10 for straight lines and B20 for curves. Comes with a B type expandable holder that also allows perpendicular mounting with respect to the shaft, ridgeline, inner circumference

  Standard Price:	323,266 IDR
  Days to Ship:	8 Day(s) or more

• 

  Shaviv Chamfering Tool, Cutting Direction: Clockwise

  SHAVIV

  A SHAVIV tool used for chamfering and deburring steel, aluminum, castings, brass, stainless steel, and plastic, and is suitable for processing the inner surface of a countersink up to ø20 mm.

  Standard Price:	458,333 IDR
  Days to Ship:	8 Day(s) or more

• 

  Gold box

  NOGA JAPAN

  Noga Waters gold box
  This is a comprehensive kit for machining manufacturers.

  Standard Price:	4,646,000 IDR
  Days to Ship:	12 Day(s)

• 

  Deburring Blade (Heavy-Duty Type)【1-10 Pieces Per Package】

  NOGA JAPAN

  Noga Waters
  This is a heavy-duty type deburring blade.
  [Shaft Diameter (mm)]3.2

  Standard Price:	67,900 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Deburring Blade (Reverse Boring Bar)【1-10 Pieces Per Package】

  NOGA JAPAN

  Deburring blade (back spot facing bar)
  This is a set of back spot facing bars for small to large diameter holes.

  Standard Price:	202,608 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Heavy Duty Scraper

  NOGA JAPAN

  Noga Waters Deburring Tool Heavy Duty Scraper.

  Standard Price:	497,667 IDR-
  Days to Ship:	8 Day(s) or more

• 

  SHAVIV Deburring Blade, Applications: Ridge Line / Inner Periphery Front Side【10 Pieces Per Package】

  SHAVIV

  SHAVIV blade used for chamfering and deburring steel, aluminum, stainless steel, and plastic. Cobalt high-speed steel is used for high abrasion and impact resistance.

  Standard Price:	404,968 IDR
  Days to Ship:	8 Day(s) or more

• 

  Deburring Blade (spare blade)【10 Pieces Per Package】

  SHAVIV

  [Features]
  ·Cutting chips tend to form into a spiral
  [Applications]
  ·For ridge line and front side of inner circumference

  Standard Price:	516,286 IDR
  Days to Ship:	12 Day(s)

• 

  SHAVIV Deburring Blade, Manual【10 Pieces Per Package】

  SHAVIV

  SHAVIV blade used for chamfering and deburring steel, aluminum, stainless steel and plastic, and can be used when working counterclockwise.

  Standard Price:	520,667 IDR
  Days to Ship:	10 Day(s) or more

• 

  SHAVIV Deburring Blade, Cutting Direction: Clockwise【10 Pieces Per Package】

  SHAVIV

  SHAVIV blade for chamfering and deburring steel, aluminum, stainless steel and plastic.

  Standard Price:	515,578 IDR
  Days to Ship:	10 Day(s) or more

• 

  SHAVIV Deburring Blade, Work Material: Casting/Brass/Plastic【10 Pieces Per Package】

  SHAVIV

  SHAVIV blade for chamfering and deburring castings, brass, and plastics, and can be used in both left and right directions.

  Standard Price:	364,833 IDR
  Days to Ship:	8 Day(s) or more

• 

  SHAVIV Deburring Blade, Cutting Direction: Both Left and Right Rotation【10 Pieces Per Package】

  SHAVIV

  SHAVIV blade for chamfering and deburring castings, brass, stainless steel, and plastics, and can be used in both left and right directions.

  Standard Price:	520,667 IDR
  Days to Ship:	8 Day(s) or more

• 

  Shabib Deburring Blade 151-19020【10 Pieces Per Package】

  SHAVIV

  For castings, brass, stainless steel and plastic.
  It rotates left and right.

  Standard Price:	2,163,511 IDR
  Days to Ship:	11 Day(s) or more

• 

  SHAVIV Deburring Blade, Work Material: Steel/Aluminum/Plastic【10 Pieces Per Package】

  SHAVIV

  SHAVIV blade used for chamfering and deburring steel, aluminum, and plastic, which can simultaneously process both the front and back sides of holes up to 4 mm thick.

  Standard Price:	443,667 IDR
  Days to Ship:	10 Day(s) or more

• 

  SHAVIV Deburring Blade, Cutting Edge Angle: 48°【10 Pieces Per Package】

  SHAVIV

  SHAVIV blade used for chamfering and deburring steel, aluminum, and plastic, which can process the back side of holes up to 20 mm thick.

  Standard Price:	865,405 IDR
  Days to Ship:	11 Day(s) or more

• 

  SHAVIV Deburring Blade, Cutting Edge Angle: 43°

  SHAVIV

  SHAVIV blade used for chamfering and deburring steel, aluminum, and plastic. Cutting chips tend to form spirals, making it suitable for heavy-duty cutting.

  Standard Price:	637,714 IDR
  Days to Ship:	12 Day(s)

• 

  SHAVIV Deburring Blade, Work Material: Steel/Aluminum/Stainless Steel/Plastic【10 Pieces Per Package】

  SHAVIV

  SHAVIV blade for chamfering and deburring steel, aluminum, stainless steel and plastic.

  Standard Price:	615,248 IDR
  Days to Ship:	11 Day(s) or more

• 

  SHAVIV Deburring Blade, Cutting Edge Angle: 46°【10 Pieces Per Package】

  SHAVIV

  B10 shape E-type shank, for use with small diameters (φ2 mm or more), ridge lines/inner circumference front easily makes spiral chips

  Standard Price:	500,500 IDR
  Days to Ship:	12 Day(s) or more

• 

  SHAVIV Deburring Blade, Cutting Edge Angle: 44°, Applications: Ridge Line / Inner Periphery Front Side【10 Pieces Per Package】

  SHAVIV

  SHAVIV blade used for chamfering and deburring steel, aluminum and plastics. The ultra-fine nose type is suitable for processing extremely small diameters.

  Standard Price:	500,500 IDR
  Days to Ship:	11 Day(s) or more

• 

  SHAVIV Deburring Blade, Work Material: Steel/Aluminum/Plastic, Cutting Edge Angle: 44【10 Pieces Per Package】

  SHAVIV

  SHAVIV blade for chamfering and deburring steel, aluminum and plastic.

  Standard Price:	648,953 IDR
  Days to Ship:	10 Day(s) or more

• 

  SHAVIV Deburring Blade, Work Material: Casting/Brass/Plastic, Cutting Edge Angle: 48【10 Pieces Per Package】

  SHAVIV

  Same shape as the B20 E-type shank, chip discharge is powder for left and right dual-rotation, ridge lines/inner circumference front

  Standard Price:	394,287 IDR
  Days to Ship:	8 Day(s) or more

• 

  SHAVIV Deburring Blade, Cutting Edge Angle: 79°, Cutting Direction: Both Left and Right Rotation

  SHAVIV

  SHAVIV blade used for chamfering and deburring castings, brass, and plastics. Cutting chips are discharged in the form of powder, and it can be used for work in both the left and right directions.

  Standard Price:	637,714 IDR
  Days to Ship:	12 Day(s)

• 

  SHAVIV Deburring Blade, Work Material: Plastic, Applications: Ridge Line / Inner Periphery Front Side【10 Pieces Per Package】

  SHAVIV

  SHAVIV blade used for chamfering and deburring not only plastic but also rubber and flexible resin.

  Standard Price:	576,372 IDR
  Days to Ship:	11 Day(s) or more

• 

  SHAVIV, Deburring Blade, Edge Angle: 60° 4 mm【10 Pieces Per Package】

  SHAVIV

  A 4 mm width blade for SHAVIV used for chamfering and deburring steel, aluminum, castings, brass, stainless steel and plastic, suitable for precision work on the back side of holes, inner walls, and flat surfaces.

  Standard Price:	1,923,497 IDR
  Days to Ship:	11 Day(s) or more

• 

  SHAVIV, Deburring Blade, Edge Angle: 60° 8 mm【10 Pieces Per Package】

  SHAVIV

  An 8 mm wide blade for SHAVIV used for chamfering and deburring steel, aluminum, castings, brass, stainless steel and plastic, suitable for precision work on the back side of holes, inner walls, and flat surfaces.

  Standard Price:	3,366,965 IDR
  Days to Ship:	11 Day(s) or more

• 

  SHAVIV Deburring Blade, Cutting Edge Angle: 48°, Applications: Outer Circumference【10 Pieces Per Package】

  SHAVIV

  4-sided blade for machining of outer diameter of 20 mm or more, with the A-side tending to produce spiral chips, and the B-side producing peripheral powdery chips

  Standard Price:	2,885,246 IDR
  Days to Ship:	11 Day(s) or more

• 

  Bonus Pack【12 Pieces Per Package】

  SHAVIV

  For the E100P only, 2 replacement blades are included with every set of 10. TiN coated E100 replacement blades have a long life and beautiful finish

  Standard Price:	661,833 IDR
  Days to Ship:	11 Day(s) or more

• 

  Shaviv Telescopic Holder for Deburring Tool, For E-Type Blade

  SHAVIV

  If expandable holder is used, it is possible to work on parts that cannot be reached with the short shaft type.

  Standard Price:	296,143 IDR
  Days to Ship:	12 Day(s)

• 

  Shaviv Telescopic Holder for Deburring Tool, For B-Type Blade

  SHAVIV

  If expandable holder is used, it is possible to work on parts that cannot be reached with the short shaft type.

  Standard Price:	296,143 IDR
  Days to Ship:	12 Day(s)

• 

  Shaviv Telescopic Holder for Deburring Tool, for F-Type Blade

  SHAVIV

  If expandable holder is used, it is possible to work on parts that cannot be reached with the short shaft type.

  Standard Price:	200,000 IDR
  Days to Ship:	9 Day(s) or more

• 

  Shaviv Telescopic Holder for Deburring Tool, Ratchet Type for All F-Type Blades

  SHAVIV

  If expandable holder is used, it is possible to work on parts that cannot be reached with the short shaft type.

  Standard Price:	445,500 IDR
  Days to Ship:	13 Day(s) or more

• 

  Handle for Shaviv, Standard Size With Excellent Fit

  SHAVIV

  Standard size with an outstanding fitting feel. Supports all telescopic holders and blades (refer to P.24 for telescopic holder models and P.8-23 for blade models). Telescoping can be adjusted with one touch. The simple construction provides sturdiness and easy blade replacement. "Long-reach" type can be freely extended and contracted.

  Standard Price:	167,177 IDR
  Days to Ship:	8 Day(s) or more

• 

  Handle for Shaviv, Compatible With All B-Type Blades

  SHAVIV

  Standard size with an outstanding fitting feel. Supports all B-type blades (refer to pages 8-19). The handle and blade are close, which is ideal for delicate work. Durable since the product has a safety lock sleeve and a simple structure. "Extra Close" type allows for simple blade replacement, and the distance between the handle and the workpiece is short, making it suitable for work that requires a delicate touch.

  Standard Price:	244,000 IDR
  Days to Ship:	12 Day(s)

• 

  Handle for Shaviv, Compatible With All E-Type Blades

  SHAVIV

  Standard size with an outstanding fitting feel. Supports all E-type blades (refer to pages 8-19). The handle and blade are close, which is ideal for delicate work. Durable since the product has a safety lock sleeve and a simple structure. "Extra Close" type allows for simple blade replacement, and the distance between the handle and the workpiece is short, making it suitable for work that requires a delicate touch.

  Standard Price:	167,177 IDR
  Days to Ship:	11 Day(s) or more

• 

  Handle for Shaviv, Compatible With SHAVIV Long Reach

  SHAVIV

  Supports all SHAVIV long-reach types. Spare blades can be stored in the base.

  Standard Price:	244,000 IDR
  Days to Ship:	12 Day(s)

• 

  Handle for Shaviv, Spare Blade Can Be Stored at Bottom

  SHAVIV

  Supports all SHAVIV long-reach types. Spare blades can be stored in the base.

  Standard Price:	333,667 IDR
  Days to Ship:	11 Day(s) or more

• 

  Pin Vise Type Chuck

  SHAVIV

  Can hold drills and tools with shafts. Can be used for chucking φ1-8 mm shank tools. C50, C60 (scrapers) can also be held. It is ideal for repairs, assembly, clocks and watches, electric devices, etc.

  Standard Price:	660,885 IDR
  Days to Ship:	10 Day(s) or more

• 

  Shabib Mango Ⅱ

  SHAVIV

  Ideal for deburring straight lines, inner circumference and grooves. Supports all E-type blades. Ridgeline for Heavy Cutting, Internal Perimeter Faces, Simultaneous Internal Perimeter Front and Reverse

  Standard Price:	419,667 IDR
  Days to Ship:	10 Day(s) or more

• 

  Shaviv Mango II, Plain, Used for Plate Chamfering

  SHAVIV

  Ideal for plate materials up to 3 mm thick. Processing of both squares is possible at one time. Change the angle of the blade for a flat finish. For chamfering of flat surfaces and sheet materials

  Standard Price:	481,167 IDR
  Days to Ship:	8 Day(s) or more

• 

  Shaviv Mango II, with Wrench for C-Type Blades attaching and detaching

  SHAVIV

  The included C42 blade is triangular. High-accuracy finishing is possible. Dedicated Wrench Accessory for Attaching/Detaching C Type Blades, Ridgeline, Front Side Inner Circumference, Back Side Inner Circumference, Hole Inner Wall, Plane

  Standard Price:	729,616 IDR
  Days to Ship:	12 Day(s) or more

Loading...