DIA/CBN Bars

• • On Sale Till 31/03/2025

  

  Trusco Nakayama Diamond Bar

  TRUSCO NAKAYAMA

  [Features]
  · Natural diamonds with good shapes are carefully selected and used. Proprietary electrodeposition technology is employed for unfaltering fixture of diamond particles to provide exceptionally long service life.
  · Although it can be used dry, grinding fluid can be used to improve accuracy, finish, sharpness and life.

  • STOCK

  Standard Price:	140,000 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  Electroplated Diamond Bar, Medium & Precision Finishes【20 Pieces Per Package】

  MISUMI

  An affordable 20 piece electroplated diamond bar set. A selection of our popular products.

  Standard Price:	650,743 IDR
  Days to Ship:	8 Day(s) or more

• 

  Diamond Electroplating Bar Shaft Diameter 3 mm / 6 mm

  YANASE

  A wide variety of abrasive grain shapes (diamond and CBN) are available.
  
  [Features]
  · A wide variety of abrasive grain shapes (diamond and CBN) are available.

  Standard Price:	129,500 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Internal Bar 5-Piece Set (Borazone)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Borazon (CBN) is an abrasive grain that has hardness second to diamond. Suitable for iron based materials (stainless steel, SC, SK, SCM, etc.) for which diamond is not suitable.
  · Also suitable in cases where sufficient cooling is not possible, as its heat-resistant temperature is higher than that of diamond.
  [Applications]
  · Applicable workpiece materials: Carbon steel, tool steel alloy, high-speed tool steel, bearing steel, case hardened steel, hardened steel, stainless steel.

  • STOCK

  Standard Price:	800,769 IDR
  Days to Ship:	1 Day(s)

• 

  Electroplated Diamond Bar / CBN Bar (Shaft Diameter 1.6 mm)

  NAKANISHI

  It is suitable for fine and precise grinding.
  It contains 5 pieces.
  [Abrasive Grain]diamond

  Standard Price:	590,770 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Electroplated Diamond Bar / CBN Bar

  NAKANISHI

  [Features]
  · Highly durable and with a high level of cutting performance, these can be used for everything from ultra-high-precision drilling of internal holes to coarse outer diameter grinding.

  Standard Price:	280,000 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Diamond internal bar (round cylinder)

  TRUSCO NAKAYAMA

  [Features]
  · As the top of the head is rounded, it is suitable for use such as drilling and deburring of small holes.
  · Knoop hardness is about 7,000 (the hardest material on earth) so it can be used for most workpieces such as metals, marble, glass, etc. Most suited for workpieces with high hardness such as ceramic materials. However, since diamond does not withstand heat, it is not suitable for machining that involves production of large amounts of heat (HSS, etc.).
  [Applications]
  · Polishing of curved surfaces, chamfering/deburring.

  • STOCK

  Standard Price:	206,000 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Electrodeposited Diamond and CBN Bar for Ultra Small Diameter Internal Polishing

  NAKANISHI

  [Features]
  · Ideal for drilling extremely small diameter holes and conducting inner surface grinding and jig grinding.
  · The carefully selected abrasive grains are held firmly by the latest electrodeposition technology.
  · Uses a high hardness dedicated shaft, with high rigidity that achieves high precision machining.
  · Suitable for hardened steel material (SKH/SKD/SKS/SCM, heat-resistant alloy).
  [Applications]
  · Grinding of machine parts, electronic parts, precision parts and molds.

  Standard Price:	280,000 IDR-
  Days to Ship:	12 Day(s) or more

• 

  "Diamond Cutting Disc" (Electrodeposition Type)

  NAKANISHI

  [Features]
  · The electrodeposition type has greater protrusion of diamond abrasive grains and features significant concentration to deliver superior grinding force.
  [Applications]
  · Ideal for groove milling and cutting of substrates, etc., made from hard and brittle materials (carbide alloy, ceramic, stone, glass, and silicon).

  Standard Price:	694,617 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond internal bar

  TRUSCO NAKAYAMA

  [Features]
  · Shank diameters of 3 mm.
  · Knoop hardness is about 7,000 (the hardest material on earth) so it can be used for most workpieces such as metals, marble, glass, etc. Most suited for workpieces with high hardness such as ceramic materials. However, since diamond does not withstand heat, it is not suitable for machining that involves production of large amounts of heat (HSS, etc.).
  [Applications]
  · Applicable workpiece materials: Carbide alloy, glass, ceramic, rubber, plastic, stone, concrete, ferrite and other nonferrous metals.

  • STOCK

  Standard Price:	122,735 IDR-
  Days to Ship:	1 Day(s)

• 

  Sintered Diamond Bar

  MINITOR

  [Features]
  · Diamond abrasive grains are distributed in all molded layers and provide long service life.
  · Ideal for cutting at will, such as when using a hand grinder.
  [Applications]
  · Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet

  Standard Price:	1,612,000 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Electroplated Diamond Bar (Shaft Diameter 3 mm)

  MINITOR

  [Features]
  · The rough diamond abrasive grains provide excellent sharpness.
  · Ideal for coarse grinding in which a particular finishing roughness is not required.
  [Applications]
  · Compatible materials: ceramics, glass, tool steel, alloy steel, cemented carbide, cermet

  • STOCK

  Standard Price:	420,462 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Electroplated Diamond Bar / CBN Bar Set (Electroplated CBN Bar / Assorted Set)

  NAKANISHI

  [Features]
  · A set of highly-versatile precision grinding tools.
  · Highly durable and with a high level of cutting performance, these tools can be used for everything from precision machining and high-efficiency cutting to coarse outer diameter grinding.

  Standard Price:	2,346,924 IDR
  Days to Ship:	12 Day(s)

• 

  MISUMI, Shafted Internal Abrasive Stone HS-JGPC/HS-JGPD

  MISUMI

  Suppresses chattering and exhibits strength in high-hardness materials.
  [Shank Material]High stiffness, high-speed steel

  • Volume Discount

  Standard Price:	190,997 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Electroplated Diamond Bar (φ3 Steel Shank)【1-30 Pieces Per Package】

  MISUMI

  Introducing the immensely popular electroplated diamond bar set at an affordable price

  • Volume Discount

  Standard Price:	72,680 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Electroplated Diamond Bar (φ6 Steel Shank)【1-10 Pieces Per Package】

  MISUMI

  Introducing the extremely popular electroplated diamond bar with a φ6 shank

  • Volume Discount

  Standard Price:	184,236 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Electroplated Diamond Bar with Tapered Tip (Single Item)

  MISUMI

  Ideal for the removal of hard layers of submarine gates and other long and thin tapered holes following discharge.

  Standard Price:	196,069 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Internally Mounted Grindstone Jig for Grinding Electrodeposition Type

  CRYSTON DIAMOND INDUSTRY

  For internal precision grinding. Diamond and CBN tools are available.

  Standard Price:	336,000 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond electroplating bar

  NAKANISHI

  [Features]
  · Ideal for drilling extremely small diameter holes and conducting inner surface grinding and jig grinding.
  · The carefully selected abrasive grains are held firmly by the latest electrodeposition technology.
  · Uses a high hardness dedicated shaft, with high rigidity that achieves high precision machining.
  [Applications]
  · Grinding of machine parts, electronic parts, precision parts and molds.
  · Suitable for hard and brittle materials (carbide alloy, ceramics, glass, stone, silicon, etc.).

  • STOCK

  Standard Price:	263,711 IDR-
  Days to Ship:	1 Day(s) or more

• • On Sale Till 31/03/2025

  

  Borazon Internal Bar

  TRUSCO NAKAYAMA

  [Features]
  · Shank diameters of 3 mm.
  · Knoop hardness is about 4,700 (second hardest material following diamonds) so CBN can be used just as diamond for most workpieces; however, it generates large amounts of heat especially during grinding, so it is best suited for metals containing carbon.
  [Applications]
  · Applicable workpiece materials: Carbon steel, tool steel alloy, high-speed tool steel, bearing steel, case hardened steel, hardened steel, stainless steel.

  • STOCK

  Standard Price:	140,856 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  High End Black Bar #230

  TRUSCO NAKAYAMA

  [Features]
  · For rough processing, deburring, and ridge removing.
  · Special high-hardness stainless steel shank realizes firm operability and suppleness.
  · Capable of precision machining thanks to the shank, which bends less.
  · Machining time is significantly shortened as work can be done with high loads.

  • STOCK

  Standard Price:	302,154 IDR
  Days to Ship:	1 Day(s)

• 

  High End Black Bar #325

  TRUSCO NAKAYAMA

  [Features]
  · For finishing, chamfering.
  · Special high-hardness stainless steel shank realizes firm operability and suppleness.
  · Capable of precision machining thanks to the shank, which bends less.
  · Machining time is significantly shortened as work can be done with high loads.

  • STOCK

  Standard Price:	304,769 IDR-
  Days to Ship:	1 Day(s)

• 

  High End Black Bar #600

  TRUSCO NAKAYAMA

  [Features]
  · For Precision Finishing.
  · Special high-hardness stainless steel shank realizes firm operability and suppleness.
  · Capable of precision machining thanks to the shank, which bends less.
  · Machining time is significantly shortened as work can be done with high loads.

  • STOCK

  Standard Price:	310,308 IDR
  Days to Ship:	1 Day(s)

• 

  Diamond bar set of 8【8 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · For materials that are difficult to grind such as carbide alloys, as well as for non-metals such as glass, ceramics and the like.
  · A significant reduction in machining time is achieved.
  · Natural diamonds with good shapes are carefully selected and used.
  · Proprietary electrodeposition technology is employed for unfaltering fixture of diamond particles to exhibit exceptionally long service life.
  [Applications]
  · Applicable workpiece materials: Carbide alloy, glass, ceramic, rubber, plastic, stone, concrete, ferrite and other nonferrous metals.

  • STOCK

  Standard Price:	1,581,692 IDR
  Days to Ship:	1 Day(s)

• 

  Diamond bar set of 5【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · For carbide alloys and non-metals such as glass, ceramics and the like.
  · A significant reduction in machining time is achieved.
  · Natural diamonds with good shapes are carefully selected and used. Proprietary electrodeposition technology is employed for unfaltering fixture of diamond particles to exhibit exceptionally long service life.
  [Applications]
  · Applicable workpiece materials: Carbide alloy, glass, ceramic, rubber, plastic, stone, concrete, ferrite and other nonferrous metals.

  • STOCK

  Standard Price:	1,838,615 IDR
  Days to Ship:	1 Day(s)

• 

  CBN Bar

  TRUSCO NAKAYAMA

  [Features]
  · Ideal for machining ferrous metals.
  · As it has micro crushing power (autogenous action), stable processed surfaces can be produced.
  · Heat resistance is better than diamond at about 1,400°C.

  • STOCK

  Standard Price:	207,385 IDR-
  Days to Ship:	1 Day(s)

• 

  Disc type diamond bar

  TRUSCO NAKAYAMA

  [Features]
  · It is an integrally processed high-precision shank.
  · The use of synthetic diamond leads to a much flatter disc.
  · Uses rust-resistant stainless steel.
  · Higher rigidity compared to a mandrel type.
  [Applications]
  · Groove filling.
  · Cutting.
  · Surface processing.
  · Chamfering.
  · Deburring.

  • STOCK

  Standard Price:	482,000 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Disc type CBN bar

  TRUSCO NAKAYAMA

  [Features]
  · It is an integrally processed high-precision shank.
  · Uses rust-resistant stainless steel.
  · CBN is ideal for processing ferrous metals.
  · Higher rigidity compared to a mandrel type.
  [Applications]
  · Grooving
  · Cutting
  · Surface Processing
  · Chamfering
  · Deburring

  • STOCK

  Standard Price:	478,000 IDR-
  Days to Ship:	1 Day(s)

• 

  Diamond Electroplating Bur (ø3 Steel Shank)【1-10 Pieces Per Package】

  HONGIA

  A large amount of abrasive grain protrudes for excellent grinding power. Ideal for polishing/finishing jigs, metal casting, machining small diameter holes, and rough machining.

  Standard Price:	1,595,626 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Electrocoated Diamond Bar Shaft Diameter 2.34 mm

  MINITOR

  [Features]
  · Large diamond abrasive grain protrusions for excellent sharpness.
  · Ideal for rough grinding when a finish surface roughness is not required.
  [Applications]
  · Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet

  Standard Price:	418,462 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Electrocoated Diamond Bar Shaft Diameter 3 mm

  MINITOR

  [Features]
  · Large diamond abrasive grain protrusions for excellent sharpness.
  · Ideal for rough grinding when a finish surface roughness is not required.
  [Applications]
  · Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet

  • STOCK

  Standard Price:	291,795 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Super Diamond Grindstone

  MINITOR

  [Features]
  · Diamond abrasive grains are distributed in all molded layers and provide long service life.
  · Ideal for cutting at will, such as when using a hand grinder.
  [Applications]
  · Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet

  • STOCK

  Standard Price:	701,538 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Electrocoated Diamond Bar Shaft Diameter 6 mm

  MINITOR

  [Features]
  · Large diamond abrasive grain protrusions for excellent sharpness.
  · Ideal for rough grinding when a finish surface roughness is not required.
  [Applications]
  · Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet

  Standard Price:	576,924 IDR-
  Days to Ship:	8 Day(s) or more

• 

  FR Diamond Grindstone

  MINITOR

  [Features]
  · Diamond abrasive grains are distributed in all molded layers and provide long service life.
  · The moderate elasticity of the resin binding agent provides a uniform finish without deep scratches.
  [Applications]
  · Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet

  Standard Price:	442,181 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Electro-Deposited CBN Bar

  MINITOR

  [Features]
  · Large CBN abrasive grain protrusions for excellent sharpness.
  · Ideal for rough grinding when a finish surface roughness is not required.
  [Applications]
  · Applicable Materials: Tool Steel, Alloy Steel, General Steel, Stainless Steel

  Standard Price:	399,231 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Precision Electrodeposited Diamond Bar

  MINITOR

  [Features]
  · An electrodeposited diamond bar which has a high-rigidity carbide shaft with a runout accuracy of 5 μm or less.
  · High accuracy and cutting depth during machining prevent problems with axial clearance, drastically improving machining accuracy and efficiency.
  [Applications]
  · Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet

  Standard Price:	813,774 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Cutting Disc

  MINITOR

  [Features]
  · A cutting tool with excellent speed and cutting ability.
  · Stainless steel substrate enhances safety and stability, and there is no change in size due to wear.
  [Applications]
  · Compatible materials: ceramics, glass, tool steel, alloy steel, cemented carbide, cermet

  • STOCK

  Standard Price:	1,101,538 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Diamond cutting disc metal bond all layer type

  MINITOR

  [Features]
  · A cutting tool capable of speedy and excellent cutting.
  · The stainless steel base plate provides safety and stability and there will be no size change due to wear.
  [Applications]
  · Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet

  Standard Price:	2,117,714 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Electro-Deposited Diamond Wheel

  MINITOR

  [Features]
  · Separate type tool to be used in combination with a mandrel (shaft).
  · Because the mandrel can be used repeatedly, post-use waste is reduced, resulting in lower costs than tools with shafts.
  · Hole Diameter (mm): 1.8
  · Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet, General Steel, Stainless Steel, Aluminum, Copper

  Standard Price:	1,019,894 IDR
  Days to Ship:	8 Day(s) or more

• 

  Electroplated diamond bur Shaft diameter 2.34 mm (miniature type)

  NAKANISHI

  [Features]
  · Suitable for a wide range of processes such as precision grinding, deburring and engraving.
  · Electroplated bonding provides excellent grinding ability thanks to the its dense and highly abrasive grain.

  Standard Price:	170,924 IDR-
  Days to Ship:	12 Day(s)

• • On Sale Till 31/03/2025

  

  Nakanishi Diamond Bar

  NAKANISHI

  [Features]
  · Suitable for a wide range of machining from precision grinding to deburring and engraving.
  · With the electrodeposition bond, the grinding abrasive grains protrude more and feature significant concentration to deliver superior grinding force.

  Standard Price:	264,154 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  Electroplated Diamond Bar / CBN Bar (Shaft Diameter 2.34 mm)

  NAKANISHI

  It is suitable for fine and precise grinding.
  It has a cylindrical round tip.
  [Abrasive Grain]diamond

  Standard Price:	326,462 IDR
  Days to Ship:	12 Day(s)

• 

  Electroplated diamond bur for deep holes (long shaft type)

  NAKANISHI

  [Features]
  · A long shaft type diamond bur that is convenient for deep hole and deep groove processing.

  Standard Price:	326,462 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Electroplated diamond bur Shank shaft diameter 3 mm

  NAKANISHI

  [Features]
  · Demonstrates high grinding ability and durability from precision grinding to outer diameter grinding coarse processing.

  Standard Price:	263,151 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Diamond Electroplating Bar / Carbon Bur Set, Diamond Electroplating / Electroplating CBN Set

  NAKANISHI

  [Features]
  · A set of highly-versatile precision grinding tools.
  · Highly durable and with a high level of cutting performance, these tools can be used for everything from precision machining and high-efficiency cutting to coarse outer diameter grinding.

  Standard Price:	2,346,924 IDR
  Days to Ship:	12 Day(s)

Loading...