Disks（Page5）

• 

  Stikit Tri-M-ite Disc Roll 426U (Without Holes)【125-250 Pieces Per Package】

  3M

  A disc roll with glue but no liner that uses a silicon carbide abrasive with excellent cutting properties. The discs are connected in a roll and have great flexibility and durability. Used by attaching to a special disk pad.

  Standard Price:	1,250,769 IDR-
  Days to Ship:	12 Day(s) or more

• 

  3M Cubitron II "Fiber Disc" (for Steel and Aluminum) 982C Outer Diameter 102 mm

  3M

  Sustains a good sharpness by employing the triangle ceramic abrasive grain, Cubitron II.
  

  • STOCK

  Standard Price:	64,615 IDR-
  Days to Ship:	1 Day(s)

• 

  Cubitron II Fiber Disc 987C

  3M

  Use of triangular ceramic abrasive grain Cubitron II allows for long-lasting sharpness.

  • STOCK

  Standard Price:	64,615 IDR-
  Days to Ship:	1 Day(s)

• 

  Clean Sanding Disc 236U

  3M

  With pattern hole processing, grinding dust exhaust properties are enhanced, clogging is reduced, grinding force will last, has long life and therefore can reduce waste.

  Standard Price:	10,308 IDR
  Days to Ship:	1 Day(s)

• 

  Techno Disc S Type

  ICHIGUCHI

  Deep scratches from initial grinding can be prevented by adding curvature on the edge of the polishing cloth. Smooth cutting quality is sustained until the very end.

  • STOCK

  Standard Price:	120,000 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Techno Disc

  ICHIGUCHI

  This grindstone was devised especially for work with hard materials, welding beads and other heavy grinding work. Exceptionally effective when high pressure is applied during work.

  Standard Price:	95,424 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Techno Disk A【1-10 Pieces Per Package】

  ICHIGUCHI

  A highly self-sharpening (renewing itself when the grinding surface has become dull) base fabric with alumina abrasive material is used. The high grinding strength and quick grinding speed are its characteristics.

  Standard Price:	88,227 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Techno Disc LLC Type【1-5 Pieces Per Package】

  ICHIGUCHI

  Elasticity and shock absorbing capacity of the disc are improved by extending the width of the polishing cloth, making it possible to apply pressure when working on brittle materials.

  Standard Price:	213,286 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Techno Disc C Type

  ICHIGUCHI

  Uses silicon carbide abrasive grain. Exhibits excellent cutting capabilities without needing to apply extra pressure, allowing brittle materials to be effectively cut while hard materials can be shaved down more aggressively.

  Standard Price:	177,738 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Sco-Light Flap M【5 Pieces Per Package】

  ICHIGUCHI

  Nonwoven fabric abrasive material has been processed into a flap shape. Suitable for work on both flat surfaces and irregularly shaped surfaces. Supports rough to fine finishing.
  
  [Features]
  · Polishing cloth (sandpaper) is sandwiched between nonwoven fabric abrasive material.
  · Higher abrasive power than S type, and can also be used for hairline machining.

  Standard Price:	1,895,000 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Super Ceramic Disc【5-10 Pieces Per Package】

  ICHIGUCHI

  [Features]
  · Use it to sense the "grinding force."
  [Applications]
  · Used for heavy grinding, peeling black scale, and processing welding beads.

  Standard Price:	812,745 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Scott Disc Super Diamond【5 Pieces Per Package】

  ICHIGUCHI

  One twist replaces polishing agent and attaches or detaches disc. For grinding and polishing of hard-to-cut materials, such as carbide, ceramic, quartz glass, etc.

  Standard Price:	1,253,432 IDR-
  Days to Ship:	8 Day(s) or more

• 

  S/C Disk

  ICHIGUCHI

  Light, safe polishing disc made from cloth (non-woven fabric) that fits surfaces ranging from flat to curved surfaces. Attach the dedicated pads for work on flat surfaces. Remove the dedicated pads for work on curved surfaces.
  
  [Features]
  · It is a nonwoven fabric abrasive disc reinforced with a strong fabric.
  · Fits well to both flat and curved surfaces for firm polishing.
  · The center is dented, which makes it easy to handle and simple to install.
  · If a dedicated pad of 96ø is attached, smooth work is possible even on flat surfaces.
  · If a dedicated pad of 68ø is attached, even curved surfaces can be polished easily.
  · Securely fits curved surfaces in addition to flat surfaces.
  · Enables smooth polishing with no clogging.
  · For removing secondary burrs after machining, spatter, rust on forged parts, burrs, and parting lines.
  · For machining scratches and mismatch leveling.
  

  Standard Price:	82,710 IDR
  Days to Ship:	8 Day(s) or more

• 

  S/C Disk Ceramic Type【10 Pieces Per Package】

  ICHIGUCHI

  Light, safe polishing disc made from cloth (non-woven fabric) that fits surfaces ranging from flat to curved surfaces. Attach the dedicated pads for work on flat surfaces. Remove the dedicated pads for work on curved surfaces.
  
  [Features]
  · It is a nonwoven fabric abrasive disc reinforced with a strong fabric.
  · Fits well to both flat and curved surfaces for firm polishing.
  · The center is dented, which makes it easy to handle and simple to install.
  · If a dedicated pad of 96ø is attached, smooth work is possible even on flat surfaces.
  · If a dedicated pad of 68ø is attached, even curved surfaces can be polished easily.
  · Securely fits curved surfaces in addition to flat surfaces.
  · Enables smooth polishing with no clogging.
  · The ceramic type is ideal for harder polishing work.
  · Since it is made out of cloth, it is light and reliable.
  · Secondary burrs after machining

  Standard Price:	179,385 IDR
  Days to Ship:	12 Day(s)

• 

  Radial Wheel

  ICHIGUCHI

  [Features]
  - Since there is an open space between the polishing cloths, there will be no clogging even when removing rust or paint. Also, since the polishing cloth is upright, it won't hit the workpiece too hard and damage it.
  ・Suitable for polishing ferrous and non-ferrous metals, removing paint, removing rust, and removing bark from wood.
  ・Uses Japanese-made abrasive material.
  [Applications]
  ・Polishing before plating.
  ・Remove rust before painting.
  ・Polishing of stainless steel and iron.
  ・Paint removal.
  

  Standard Price:	95,272 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Mild Techno【1-10 Pieces Per Package】

  ICHIGUCHI

  Using a base much smaller than the disc diameter allows the abrasive cloth to warp and move freely. Polishing cloth firmly contacts the curved surface or irregular surface.
  
  [Features]
  · A disc with a rather special shape.
  · Backing board has been made smaller to produce even more flexibility.
  · Polishes curved surface or irregular surface, without omissions.
  · Polishing, spatter and burr removal, chamfering and rust and paint removal of iron and stainless steel

  Standard Price:	96,849 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Polishing Wheels【5 Pieces Per Package】

  ICHIGUCHI

  Work is done by a polishing cloth that spreads due to centrifugal force. By changing the rotational speed, the contact with the workpiece can be freely adjusted.

  Standard Price:	1,087,226 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Blade Disc【5 Pieces Per Package】

  ICHIGUCHI

  Utilizes a sintered, exceptionally powerful and flexible unique non-woven nylon polishing material. Perfect for cleaning the surface only without scratching the underlay, such as removing rust from metal surfaces, and paint or foreign substance removal.
  
  [Features]
  · It is an abrasive material that combines high peeling capacity, anti-clogging structure and softness that prevents the substrate from being scraped.
  · Removes rust, paint, and black scale.
  · According to the tool, select disc grinder type, wheel with shaft, or perforated type.
  · For rust and coating agent removal, paint, varnish, and sealant removal, overwelding repair, polyethylene molding, gasket and light spatter removal, and black scale (oxide film) removal

  Standard Price:	388,000 IDR
  Days to Ship:	12 Day(s)

• 

  Techno Disk A【20 Pieces Per Package】

  ICHIGUCHI

  A highly self-sharpening (renewing itself when the grinding surface has become dull) base fabric with alumina abrasive material is used. The high grinding strength and quick grinding speed are its characteristics.

  Standard Price:	1,418,425 IDR
  Days to Ship:	8 Day(s) or more

• 

  Techno Disc HYBRID【5 Pieces Per Package】

  ICHIGUCHI

  Combination of flat- and curved-surface polishing creates a synergy. Ideal for finishing beads in the interior angle corners of welded parts. Also excellent for general grinding and polishing.

  Standard Price:	798,167 IDR
  Days to Ship:	8 Day(s) or more

• 

  Mega Brite Disc A【50 Pieces Per Package】

  ICHIGUCHI

  Provides air cooling effect for less heat.
  Low noise, generating no high-pitched sounds as a grindstone does.
  Boasts excellent durability that is 5-6 times more durable than flexible grindstones.

  Standard Price:	2,812,500 IDR
  Days to Ship:	9 Day(s) or more

• 

  Scott Disc Test Kit

  ICHIGUCHI

  Sold as a set of especially popular discs, it can cover all eventualities from heavy grinding and grinding work to polishing work.
  
  [Features]
  · Convenient test kit available in each size.
  · Use according to the application

  Standard Price:	1,690,243 IDR
  Days to Ship:	10 Day(s) or more

• 

  Techno Disc【5 Pieces Per Package】

  ICHIGUCHI

  By creating a larger gap on the disc surface, it is possible to suppress scorching and clogging even when grinding viscous workpieces or during work that generates a large amount of grinding chips.

  Standard Price:	616,939 IDR
  Days to Ship:	8 Day(s) or more

• 

  Techno Disc Conical【10 Pieces Per Package】

  ICHIGUCHI

  [Features]
  · The disc surface is angled.
  · Since the workpiece is not notched even when the work angle is boosted, cutting and polishing work is easily performed.

  Standard Price:	1,109,045 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Welding Diamond Cup Wheel (Dry Type)

  LOBTEX

  [Features]
  · For grinding casting/welding beads, metallic black scaling, FRP, GRP, ceramics, fire-resistant bricks.
  · Lightweight (metal bond cup ratio 55%), with easy operation via superior operability thanks to the rounded grinding surface.
  · With a longer life than resinoid grindstones and less dust, odor, and sparks, this product is environmentally friendly, with effortless replacement.

  Standard Price:	1,251,000 IDR
  Days to Ship:	8 Day(s) or more

• 

  Polisher, Urethane Puff / Yellow

  COMPACT TOOL

  Yellow urethane buff (urethane disc) dedicated for electronic polisher C-201.

  Standard Price:	300,000 IDR
  Days to Ship:	8 Day(s) or more

• 

  Gear Action Polisher Urethane Puff

  COMPACT TOOL

  Polishing buff. Can easily be attached/detached with the 5-inch Velcro pad.

  Standard Price:	250,640 IDR
  Days to Ship:	8 Day(s) or more

• • On Sale Till 31/03/2025

  

  Welding bead removing disk【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  Ceramic disc that emphasizes grinding power. It has more grinding power than the offset and flexible grindstones, improving work efficiency. Sharp surface finishing is possible. For removing welding beads, deburring, chamfering, removing rust, removing paint, and polishing stainless steel and general steel.

  Standard Price:	384,770 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  Bevel Disc

  TRUSCO NAKAYAMA

  The disc processed into a special umbrella shape, the tip of the disc contacts the work piece at all times to deliver a beautiful finish. High flexibility allows excellent fitting to uneven surfaces without excessively scraping off the work piece. Minimum clogging with no welding of nylon. Allows safe use with no worries of wires scattering unlike with wire brushes. Allows one touch attachment / removal of the grinder with a M10 screw. Operator-friendly design with less axial deflection. Stubborn rust removal, scorching removal and crane work.

  Standard Price:	1,145,857 IDR
  Days to Ship:	12 Day(s)

• 

  Bevel Disc

  TRUSCO NAKAYAMA

  Thanks to the disc processed into a special umbrella shape, the tip of the disc contacts the work piece at all times to deliver a beautiful finish. High flexibility allows excellent fitting to uneven surfaces without excessively scraping off the work piece. Minimum clogging with no welding of nylon. Allows safe use with no worries of wires scattering unlike with wire brushes. Allows one touch attachment / removal of the grinder with a M10 screw. Operator-friendly design with less axial deflection. Scorching removal, oxide film removal and paint stripping.

  Standard Price:	917,714 IDR
  Days to Ship:	12 Day(s)

• 

  Bevel Disc

  TRUSCO NAKAYAMA

  The disc processed into a special umbrella shape, the tip of the disc contacts the work piece at all times to deliver a beautiful finish. High flexibility allows excellent fitting to uneven surfaces without excessively scraping off the work piece. Minimum clogging with no welding of nylon. Allows safe use with no worries of wires scattering unlike with wire brushes. Allows one touch attachment / removal of the grinder with a M10 screw. Operator-friendly design with less axial deflection. For surface roughing (scuffing) before stainless steel finishing, painting or gluing.

  Standard Price:	917,714 IDR
  Days to Ship:	12 Day(s)

• 

  Bevel Disc

  TRUSCO NAKAYAMA

  Thanks to the disc processed into a special umbrella shape, the tip of the disc contacts the work piece at all times to deliver a beautiful finish. High flexibility allows excellent fitting to uneven surfaces without excessively scraping off the work piece. Minimum clogging with no welding of nylon. Allows safe use with no worries of wires scattering unlike with wire brushes. Allows one touch attachment / removal of the grinder with a M10 screw. Operator-friendly design with less axial deflection. Rust removal and paint stripping.

  Standard Price:	917,714 IDR
  Days to Ship:	12 Day(s)

• 

  Polifan® Flap Disc

  PFERD

  Standard Price:	163,000 IDR
  Days to Ship:	12 Day(s) or more

• 

  Techno Disc HYBRID Sample Set

  ICHIGUCHI

  A great value set of epoch-making discs that can be used on the top, outer and underside.

  Standard Price:	664,265 IDR
  Days to Ship:	8 Day(s) or more

• 

  Disc Paper - Esper Black (Zirconia)

  MIYUKI SANGYO

  Disc - Esper Black, Zirconia
  [Features]
  Multi-blade disc
  Strong honing ability
  Long lifespan
  Low clogging
  Beautiful finish
  High safety
  [Applicatins]
  Removal of spot welding in automobiles and home appliances
  Polishing in shipbuilding and bridges
  Deburring
  Polishing of difficult-to-grind materials
  [Specification]
  Maximum operating rotation speed: 72m/s (4300m/min)
  [Material]
  Work material: General steel/stainless steel

  • STOCK

  Standard Price:	187,123 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Disc Paper - Esper Mini Alundum (for General Metals)

  MIYUKI SANGYO

  [Features]
  · It has durability 10-plus times higher than disc paper and 10 times higher than the offset grinding wheel.
  · It provides soft contact with the ground object, adsorbs well and does not cause deep scratches, making the next process easy.
  [Applications]
  · For removing spot-welding burrs on automobiles, home appliances, etc.
  · For removing weld beads for shipbuilding, steel frames, bridges, etc.
  · Metal deburring.
  · For pretreatment in plating and coating as well as rust removal.
  · Polishing wood and plastic.
  · Chamfering.
  · Tool used: Air/electric disc grinder.

  Standard Price:	116,260 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Disc Paper - Esper Mini Zirconia (for Stainless Steel / Difficult-To-Cut Materials)

  MIYUKI SANGYO

  [Features]
  · It has durability 10-plus times higher than disc paper and 10 times higher than the offset grinding wheel.
  · It provides soft contact with the ground object, adsorbs well and does not cause deep scratches, making the next process easy.
  [Applications]
  · For removing spot-welding burrs on automobiles, home appliances, etc.
  · For removing weld beads for shipbuilding, steel frames, bridges, etc.
  · Metal deburring.
  · For pretreatment in plating and coating as well as rust removal.
  · Polishing wood and plastic.
  · Chamfering.
  · Tool used: Air/electric disc grinder.

  Standard Price:	116,336 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Disc Paper - New Esper (Alundum)

  MIYUKI SANGYO

  [Features]
  · It has durability 10-plus times higher than disc paper and 10 times higher than the offset grinding wheel.
  · It provides soft contact with the ground object, adsorbs well and does not cause deep scratches, making the next process easy.
  [Applications]
  · For removing spot-welding burrs on automobiles, home appliances, etc.
  · For removing weld beads for shipbuilding, steel frames, bridges, etc.
  · Metal deburring.
  · Polishing of viscous metals and difficult-to-cut materials.
  · For pretreatment in plating and coating as well as rust removal.
  · Paint removal.
  · Polishing wood and plastic.
  · Tool used: Air/electric disc grinder.

  Standard Price:	171,444 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Disc paper GP top® 100 sheets【100 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · All-round type that features an abundant grain size variation to handle rough finishing polishing.
  · There is hardly any strain on the workpieces due to heat or burning due to the air cooling effect.
  [Applications]
  · Metal polishing, removing welding beads, polishing automobiles, hulls and tanks, various types of deburring, and polishing other stainless steel, steel, and nonferrous metals.

  Standard Price:	7,093,164 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Nylon Disc Mini Hard【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Uses a lot of nylon so it has a long working life.
  · Unlike a grindstone, there is no risk of excessive grinding and stable polishing is possible.
  [Applications]
  · Removes stubborn rust, black scale, etc.
  · Welding burn removal, paint peeling, finish of stainless steel, etc.

  Standard Price:	616,769 IDR-
  Days to Ship:	1 Day(s)

• 

  Bevel Disc Hole Type【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Thanks to its umbrella-like shape, the tip of the disc remains in constant contact with the workpiece, making a beautiful finish possible.
  · Flexibility is high, so it can also fit well to uneven surfaces without shaving off too much of the workpiece.
  · Minimal clogging and no nylon deposition.
  · Can be used safely without the risk of wire scattering like a wire brush, etc.
  · Mounting hole diameter is 15 mm, usable with both electric and pneumatic grinders.
  · A user-friendly design that suppresses center run-out.
  [Applications]
  · Stubborn rust removal, blackening removal, scraping work, etc.

  Standard Price:	678,462 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Bevel Disc Felt【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Thanks to its umbrella-like shape, the tip of the disc remains in constant contact with the workpiece, making a beautiful finish possible.
  · Has high flexibility and adapts well to workpieces.
  · Mounting hole diameter is 15 mm, usable with both electric and pneumatic grinders.
  [Applications]
  · Grease abrasive (blue bar etc.) is applied to iron and stainless steel for polishing and mirror finish.
  · Tool used: 100 mm disc grinder (electric/pneumatic dual use)

  Standard Price:	1,554,714 IDR
  Days to Ship:	12 Day(s)

• 

  Bevel Disc Felt (Direct Screw-in Type)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Thanks to its umbrella-like shape, the tip of the disc remains in constant contact with the workpiece, making a beautiful finish possible.
  · Has high flexibility and adapts well to workpieces.
  · It can be attached/detached to the grinder in a single touch using a M10 screw.
  [Applications]
  · Grease abrasive (blue bar etc.) is applied to iron and stainless steel for polishing and mirror finish.
  · Tool used: disc grinder.

  Standard Price:	1,554,714 IDR
  Days to Ship:	12 Day(s)

• 

  Internal Grindstone

  TRUSCO NAKAYAMA

  [Features]
  · Offers good grindability and durability.
  [Applications]
  · For Straight Grinder

  Standard Price:	56,923 IDR-
  Days to Ship:	12 Day(s)

• 

  Zirconia Disc (For Anglon)

  MINITOR

  [Features]
  · A disc with zirconia abrasive granules with excellent characteristics for grinding soft, hard-to-cut materials, such as aluminum.
  · A special coating has been applied to the zirconia abrasive grain to suppress clogging and achieve uniform finish and long service life.
  [Applications]
  · Applicable Materials: Ceramics, Glass, Tool Steel, Resin, Rubber, Cemented Carbide, Cermet, General Steel, Stainless Steel, Aluminum, Copper

  Standard Price:	610,770 IDR-
  Days to Ship:	9 Day(s) or more

Loading...