Disks（Page3）

• 

  3M^TM Roloc ^TM Disc Pad

  3M

  A disc with an outer diameter of 50 mm that's used for the collet chuck type angle grinder (electric/pneumatic). It can also be attached directly to male screws without using the shaft. One-touch attachment and removal using a screw is possible without a replacement tool. Various products are arrayed from cutting applications to finishing applications.
  
  [Features]
  · Compatible products: Roloc disc, Roloc metal connector disc, Roloc bristle disc

  Standard Price:	781,231 IDR
  Days to Ship:	1 Day(s)

• 

  S Wheel

  NEW REGISTON

  [Features]
  · Polishing can be done with a soft touch due to the specially structured base.
  · Different from general purpose paper multi-blade wheels, the flange portion is deep, preventing interference with tightening nuts.
  · If the 15-hole blue bushing is removed, it can also be used with the 16-hole grinder.

  Standard Price:	960,856 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Norton, Vortex Blue Disc

  SAINTGOBAIN

  A revolutionary disc using Norton's state-of-the-art "Vortex technology"that is capable of everything from removing welding beads to finishing equivalent to P320 by adjusting the supplied pressure.
  
  [Features]
  · Norton's "Blue Disc" uses the state-of-the-art Vortex technology to reduce abrasion, coating non-woven cloth with special abrasive grain less prone to deterioration of sharpness.
  · By adjusting the amount of feed pressure applied by a grinder, this revolutionary product supports a wide range of work, from 'rough manual work' like removing welding beads, to 'fine manual work', like shading and removing scratches from stainless-steel surfaces.

  Standard Price:	388,462 IDR
  Days to Ship:	12 Day(s)

• 

  Norton, Bear-Tex Disc Brush

  SAINTGOBAIN

  A disc with a nylon base with a non-woven abrasive applied and firmly set. It can speedily remove rust, dirt and coating without scraping the base.
  
  [Features]
  · A disc type brush with a nylon base with a non-woven (Bear-tex) abrasive applied and firmly set.
  · It can remove stubborn rust, dirt, oil film, coating and the like without scraping the base.
  · Allows work to be performed safely without scattering the wire like a wire brush

  Standard Price:	253,385 IDR
  Days to Ship:	1 Day(s)

• 

  Norton, SG Blaze Ceramic Disc

  SAINTGOBAIN

  Quick Change Disc that uses the high-purity next-generation ceramic abrasive "SG Blaze R980". Boasts excellent cutting feel and high durability.
  
  [Features]
  · Norton's original next-generation high-purity ceramic alumina abrasive grain "SG Blaze" with edge-sharp abrasive grains boasts excellent grinding power and durability.
  · Super size coating finish applied to ensure a finish that has minimal burn deposits.

  Standard Price:	34,308 IDR
  Days to Ship:	12 Day(s)

• 

  Norton, Alumina ACE Alundum Disc

  SAINTGOBAIN

  Quick change disc using alumina abrasive. Features smooth grinding force and finish.
  
  [Features]
  · Uses alumina abrasive to enable a smooth finish.
  · Small scratches and such come off easily with light force.
  · Can be used for eliminating marks after using "SG Blaze ceramic discs"

  Standard Price:	23,385 IDR
  Days to Ship:	12 Day(s)

• 

  Norton, Vortex 3D Non-Woven Fabric Disc

  SAINTGOBAIN

  Quick change nonwoven fabric disc using the latest vortex technology. "Top", "Side", "Bottom" 3D work is possible.
  
  [Features]
  · The three-dimensional structure that allows the "top", "bottom", and "side" of the disc to be used supports work that uses complicated shapes and inner circumference polishing.
  · Exhibits high speed, durability, and performance with Norton's original "Vortex Technology".
  · It can support a range from burn removal work to deseaming work.
  · Dedicated quick change holder is equipped as standard and makes 3D work possible

  Standard Price:	95,385 IDR
  Days to Ship:	12 Day(s)

• 

  Norton, Cleaning Non-Woven Fabric Disc

  SAINTGOBAIN

  For buffing and dirt removal before applying paint and coating. Quick-change non-woven disc for finish polishing. It can remove stubborn dirt on workpiece simply by tracing it.
  
  [Features]
  · For buffing, dirt removal and finish polishing before applying paint and coating.
  · It can easily remove dirt stuck on workpieces simply by tracing it.
  · "Vortex 3D Brush Quick Change" can be used for quick elimination of marks after grinding

  Standard Price:	33,231 IDR
  Days to Ship:	12 Day(s)

• 

  Norton, Finishing Felt Disc

  SAINTGOBAIN

  Disc for final finishing using the quick change series tools. Glazing. Ideal for light dirt removal.
  
  [Features]
  · For glazing, light dirt removal and wiping.
  · Quick change system used for final finishing applications.
  · When performing a mirror finish, use a blue bar or other polishing agent

  Standard Price:	43,847 IDR
  Days to Ship:	12 Day(s)

• 

  Grand Super High Pitch Paper【100 Pieces Per Package】

  SANKYO RIKAGAKU

  The connection type is hook-and-loop style.
  Easy-to-cut work materials are general steel/stainless steel/steel alloy/cast iron/aluminum/brass/gunmetal.
  The hook-and-loop style makes it easy to replace.
  Helps remove paint and rust.

  Standard Price:	1,049,434 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cyclone

  MURAKO

  Ultra-low-cost flap disc manufactured in Japan using Japanese polishing cloth. It is safe because it makes little noise and produces few sparks. Since it is an abrasive cloth, there is no secondary burr after grinding, and the finished surface is finer and more beautiful than whetstones. It has an excellent autogenous action, constantly exposing new abrasive grains and preventing clogging. Abrasive cloth is very safe. No scattering like whetstones. Less vibration reduces operator fatigue.

  • STOCK

  Standard Price:	70,000 IDR-
  Days to Ship:	1 Day(s)

• 

  surface disc

  MURAKO

  [Features]
  ·The non-woven fabric bends too much and is not scraped.
  ·Comes with 3 types of dedicated pads that can be used according to the purpose.
  [Applications]
  ·Paint stripping.
  ·Rust removal.
  ·Wound blur.
  ·Deburring.
  ·Surface polishing.
  

  • STOCK

  Standard Price:	137,385 IDR-
  Days to Ship:	1 Day(s)

• 

  Surface Disc

  MURAKO

  The nonwoven fabric is flexible so it will not over-scrape. Three dedicated pads are included and can be used according to the application. Grinding performance and durability have been upgraded over that of conventional products.

  • STOCK

  Standard Price:	150,462 IDR
  Days to Ship:	1 Day(s)

• 

  Disc Paper Tokumaru α Arundum (for general metals)【10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · This product is appropriate for a wide range of uses, and is quiet when polishing and with less vibrations compared to flexible grindstone or offset grindstone.
  · Uses China-made paper.
  [Applications]
  · Grinding and polishing of steel, welding bead removal, rust removal, peeling of paint, polishing of woodwork.
  · Tool used: dedicated electric disc grinder.

  Standard Price:	307,077 IDR
  Days to Ship:	12 Day(s)

• 

  Disc paper Tokumaru α Zirconia (For stainless steel and difficult-to-cut materials)【10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · This product is appropriate for a wide range of uses, and is quiet when polishing and with less vibrations compared to flexible grindstone or offset grindstone.
  · Uses German-made Zirconia paper. A product with improved durability and cutting force.
  [Applications]
  · Stainless steel, hard-to-cut material, grinding or polishing high-hardness metal, heavy polishing for steel.
  · Tool used: dedicated electric disc grinder.

  Standard Price:	557,436 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Disc Paper Tokumaru J Arundum (for general metals)【10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · This product eliminates the pricing difference with traditional grindstones while retaining the durability, work efficiency, low noise, and safety characteristic of paper abrasives.
  · A high-hardness material mainly composed of alumina oxide.
  · Uses Japan-made paper.
  [Applications]
  · Grinding and polishing of steel, welding bead removal, rust removal, peeling of paint, polishing of woodwork.
  · Tool used: dedicated electric disc grinder.

  Standard Price:	425,471 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Disc Paper Tokumaru J Zirconia (For stainless steel and difficult-to-cut materials)【10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · This product eliminates the pricing difference with traditional grindstones while retaining the durability, work efficiency, low noise, and safety characteristic of paper abrasives.
  · Made from super-hard materials mainly consisting of zirconia, an amalgam of alkali and zirconium oxychloride. A shape with sharp points that have excellent durability.
  · Uses Japan-made paper.
  [Applications]
  · Stainless steel, hard-to-cut material, grinding or polishing high-hardness metal, heavy polishing for steel.
  · Tool used: dedicated electric disc grinder.

  Standard Price:	491,282 IDR-
  Days to Ship:	1 Day(s) or more

• 

  GP Top TOKUMARU-KUN【10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · This economy product has performance almost equivalent to GP Top® at a lower price achieved through the improvement of efficiency in the production process.
  [Applications]
  · For removing beads from welding surface.
  · For removing paint and rust.

  Standard Price:	592,991 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Disk Paper Conical Type, Alundum (for General Metals)【5-10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Tapered base board allows working on a flat surface without digging in, even if work angle is increased.
  · Outer part and central part of abrasive wear simultaneously, so you can use up uniformly all the abrasive.
  [Applications]
  · For peeling black scale from metal, and removing beading on welding surfaces.
  · For rust removal and grinding/polishing of various metals.

  Standard Price:	616,068 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Disc Paper Conical Type, Zirconia (for Stainless Steel and Difficult-to-Cut Materials)【5-10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Tapered base board allows working on a flat surface without digging in, even if work angle is increased.
  · Outer part and central part of abrasive wear simultaneously, so you can use up uniformly all the abrasive.
  [Applications]
  · For peeling black scale from metal, and removing beading on welding surfaces.
  · For polishing hard-to-cut material such as stainless steel.

  Standard Price:	673,676 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Disc Paper GP Top (R) Arundum (for general metals)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · All-round type that features an abundant grain size variation to handle rough finishing polishing.
  · There is hardly any strain on the workpieces due to heat or burning due to the air cooling effect.
  [Applications]
  · Metal polishing, removing welding beads, polishing automobiles, hulls and tanks, various types of deburring, and polishing other stainless steel, steel, and nonferrous metals.

  Standard Price:	363,419 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Disc Paper GP Top (R) Zirconia (For stainless steel and difficult-to-cut materials)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · All-round type that features an abundant grain size variation to handle rough finishing polishing.
  · There is hardly any strain on the workpieces due to heat or burning due to the air cooling effect.
  [Applications]
  · For polishing high-hardness material such as stainless steel.

  Standard Price:	388,376 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Disc Paper GP Top (R) Ceramic (For difficult-to-cut materials)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · All-round type that features an abundant grain size variation to handle rough finishing polishing.
  · There is hardly any strain on the workpieces due to heat or burning due to the air cooling effect.
  [Applications]
  · Polishing hard-to-cut material such as stainless steel, titanium steel, nickel steel, etc.

  Standard Price:	581,710 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Disc Paper GP Top (R) (for glass and stone)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · All-round type that features an abundant grain size variation to handle rough finishing polishing.
  · There is hardly any strain on the workpieces due to heat or burning due to the air cooling effect.
  [Applications]
  · Polishing of glass, stone etc.

  Standard Price:	469,573 IDR-
  Days to Ship:	12 Day(s)

• 

  "GP Top DX" (Deluxe)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Not only does it have almost the same performance as GP Top®, it uses special plates, allowing it to be used for about 18% longer than GP Top® (capable of grinding up to 75 mm O.D.).
  · A professional polishing agent, hand planted one by one.
  [Applications]
  · Metal polishing, removing welding beads, polishing automobiles, hulls and tanks, various types of deburring, and polishing other stainless steel, steel, and nonferrous metals.
  · Tool used: disc grinder.

  Standard Price:	539,317 IDR-
  Days to Ship:	1 Day(s) or more

• 

  "GP Top" (for Concrete, Silicon Carbide)【10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Utilizes high-hardness silicon carbide abrasive material.
  · The use of coarse abrasive grains (#24) suppresses clogging.
  · Polishes the surface without biting in deeply.
  [Applications]
  · Ideal for chipping concrete, chamfering and partial repairs of stones, glass, roof tiles, etc.
  · Lining pre-processing of water pipes, etc.
  · Tool used: disc grinder.

  Standard Price:	1,415,077 IDR
  Days to Ship:	1 Day(s)

• 

  "GP Top 25" (Alundum)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Long service life type.
  · For ordinary metals. All-round type that features an abundant grain size variation to handle rough finishing polishing. Prevents polishing burn, a difficult aspect for elastic grindstone, to deliver high grinding capacity and service life that is 7 to 8 times that of flexible grinding wheels. Cushioning properties keeps impact on ground objects soft when compared with grindstones.
  · Features significant autogenous action and little clogging.
  · There is hardly any strain on the workpieces due to heat or burning due to the air cooling effect.
  · A professional polishing agent, hand planted one by one.
  [Applications]
  · Metal polishing, removing welding beads, polishing automobiles, hulls and tanks, various types of deburring, and polishing other stainless steel, steel, and nonferrous metals.
  · Tool used: disc grinder.

  Standard Price:	788,286 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Diamond Top

  TRUSCO NAKAYAMA

  [Features]
  · Polishing material for disc grinders.
  · Lower cost and softer touch than all-diamond abrasive, by mixing diamond and silicon carbide sheets.
  [Applications]
  · For chamfering materials such as titanium, ceramics, ultra-hard alloys, stone, and glass; flat surface polishing.

  Standard Price:	2,330,286 IDR-
  Days to Ship:	12 Day(s)

• 

  Diamond Top

  TRUSCO NAKAYAMA

  [Features]
  · Polishing material for disc grinders.
  · Excellent abrasive power and resistance with no-fooling electrodeposited diamond sheet.
  · Lower cost and softer touch than all-diamond abrasive, by mixing diamond and silicon carbide sheets.
  [Applications]
  · For chamfering materials such as titanium, ceramics, ultra-hard alloys, stone, and glass; flat surface polishing.

  Standard Price:	3,471,077 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Disc paper GP top (R) α (direct screw-in type) Alundum (for general metals)【10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Designed with a special mold to prevent clogging.
  · Noise generation is low, so it can be used comfortably.
  · It can be installed in a single action (screw type). (Disc grinder only)
  · Due to the specialized processing that differs from ordinary methods of polishing cloth production, the autogenous action has been increased, the grinding power sustained, and the clogging and polishing burn reduced.
  [Applications]
  · Heavy duty polishing and metal polishing with disc grinder.
  · For removing welding beads.
  · For grinding general metal and timber.
  · Polishing, paint and rust removal on aircrafts, automobiles, hulls, bridges, tanks, etc.
  · Descaling and deburring various metals.
  · For other polishing work of stainless steel, iron steel and nonferrous metals.
  · Tool used: disc grinder.

  Standard Price:	772,137 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Disc Paper Direct Threaded Stems Type, Zirconia (for Stainless Steel and Difficult-to-Cut Materials)【10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Designed with a special mold to prevent clogging.
  · Noise generation is low, so it can be used comfortably.
  · It can be installed in a single action (screw type). (Disc grinder only)
  · Due to the specialized processing that differs from ordinary methods of polishing cloth production, the autogenous action has been increased, the grinding power sustained, and the clogging and polishing burn reduced.
  [Applications]
  · Heavy duty polishing and metal polishing with disc grinder.
  · For removing welding beads.
  · Excellent for metal polishing of high-hardness material as stainless and others hard-to-cut materials.
  · Polishing, paint and rust removal on aircrafts, automobiles, hulls, bridges, tanks, etc.
  · Descaling and deburring various metals.
  · For other polishing work of stainless steel, iron steel and nonferrous metals.
  · Tool used: disc grinder.

  Standard Price:	865,692 IDR
  Days to Ship:	1 Day(s)

• 

  "GP Top α" (Direct Screw-in Type)【10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Impregnated with ceramic grinding powder that combines powerful grinding force and high durability.
  · Designed with a special mold different from the usual one to prevent clogging.
  · Suitable for grinding and polishing hard-to-cut materials such as stainless steel, titanium steel, nickel steel, etc.
  [Applications]
  · For removing welding beads, deburring, and chamfering.
  · Polishing hard-to-cut material such as stainless, titanium, nickel steel, etc.

  Standard Price:	1,323,419 IDR-
  Days to Ship:	12 Day(s)

• 

  GP Curved Disc Arundum (for general metals)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · It uses polishing cloth with rounded corners, making bending easy and allowing easy grinding work even on a small rounded surface. As the pad is small and has cushioning properties, excessive scraping is not an issue, and it fits perfectly on uneven surfaces. Can be used right down to the base, making it highly economical.
  · A professional polishing agent, hand planted and crimped one by one.
  [Applications]
  · Removing paint and polishing prior to plating. Ideal for polishing of stainless steel, iron, alloys, wood and plastics.
  · Tool used: disc grinder.

  Standard Price:	798,804 IDR-
  Days to Ship:	1 Day(s) or more

• 

  GP Curved Disc【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · It uses polishing cloth with rounded corners, making bending easy and allowing easy grinding work even on a small rounded surface. As the pad is small and has cushioning properties, excessive scraping is not an issue, and it fits perfectly on uneven surfaces. Can be used right down to the base, making it highly economical.
  · A professional polishing agent, hand planted and crimped one by one.
  · Use the zirconia type which bites well into abrasive materials for grinding work.
  [Applications]
  · Removing paint and polishing prior to plating. Ideal for polishing of stainless steel, iron, alloys, wood and plastics.
  · Tool used: disc grinder.

  Standard Price:	830,599 IDR-
  Days to Ship:	12 Day(s)

• 

  GP three-sided disc Arundum (for general metals)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Allows a wide range of applications from simple grinding operations to advanced grinding and polishing operations. The polishing cloth is folded into a V-shape and bonded to the pad, making polishing work possible in three locations: top, bottom, and side. Cushioning properties are inferior to those of GP multi-discs, but the fit to uneven surfaces is perfect without the risk of sanding in too deep. Can be used right down to the base, making it highly economical.
  · A professional polishing agent, hand planted and crimped one by one.
  [Applications]
  · For polishing metal tanks and various forms of deburring.
  · Ideal for various types of groove polishing.
  · For polishing various types of metal.
  · Tool used: disc grinder.

  Standard Price:	816,068 IDR-
  Days to Ship:	12 Day(s) or more

• 

  GP three-sided disc zirconia (for heavy polishing)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Allows a wide range of applications from simple grinding operations to advanced grinding and polishing operations. The polishing cloth is folded into a V-shape and bonded to the pad, making polishing work possible in three locations: top, bottom, and side. Cushioning properties are inferior to those of GP multi-discs, but the fit to uneven surfaces is perfect without the risk of sanding in too deep. Can be used right down to the base, making it highly economical.
  · A professional polishing agent, hand planted and crimped one by one.
  · Zirconia type that features excellent bite properties for coated abrasives.
  [Applications]
  · For polishing metal tanks and various forms of deburring.
  · Ideal for various types of groove polishing.
  · For grinding and polishing nonferrous metals such as stainless steel.
  · Tool used: disc grinder.

  Standard Price:	852,991 IDR-
  Days to Ship:	12 Day(s)

• 

  GP Multi-Disc【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · The small pads are well cushioned, enabling high performance on uneven surfaces without deep scraping.
  · Can be used until the end, making it friendly on the wallet.
  · Can be used for polishing on side faces.
  · With its soft touch, this product will not leave you tired.
  · A professional polishing agent, hand planted and crimped one by one.
  [Applications]
  · For removing welding beads, removing painting, grinding before plating, and polishing stainless steel, alloy, wood, plastic, and others.
  · Tool used: disc grinder.

  Standard Price:	886,154 IDR-
  Days to Ship:	12 Day(s) or more

• 

  GP Multi-Disc【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · The small pads are well cushioned, enabling high performance on uneven surfaces without deep scraping.
  · Can be used until the end, making it friendly on the wallet.
  · Can be used for polishing on side faces.
  · With its soft touch, this product will not leave you tired.
  · A professional polishing agent, hand planted and crimped one by one.
  · Sticks well to workpieces.
  [Applications]
  · For removing welding beads, removing painting, grinding before plating, and polishing stainless steel, alloy, wood, plastic, and others.
  · Ideal for grinding and polishing stainless steel, etc.
  · Tool used: disc grinder.

  Standard Price:	886,154 IDR-
  Days to Ship:	12 Day(s)

• 

  "GP Top Mini" (No Thread Type), GP5010A【5 Pieces Per Package】【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Dedicated flap disc for 50 mm air tool.
  · Has 5 to 6 times longer life compared to offset type grindstone and does not cause grinding burns.
  · All-round type that features an abundant grain size variation to handle rough finishing polishing.
  [Applications]
  · For removing welding beads and spatters.
  · Deburring.
  · Ideal for removing spot-welding spatter on automobiles, home appliances etc., and especially polishing molds.
  · For use with ordinary metal.
  · Tools Used: disc grinder and air grinder.

  Standard Price:	453,286 IDR
  Days to Ship:	12 Day(s)

• 

  "GP Top Mini" (No Thread Type), GP5810【5 Pieces Per Package】【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · All-round type that features an abundant grain size variation to handle rough finishing polishing. Grinding burn, a shortcoming of elastic grindstones, is prevented, and it has high grindability and life 5 to 6 times as long as conventional products.
  [Applications]
  · Ideal for removing spot-welding spatter on automobiles, home appliances etc., and especially polishing molds.
  · For use with ordinary metal.
  · Tools Used: disc grinder and air grinder.

  Standard Price:	486,714 IDR-
  Days to Ship:	1 Day(s) or more

• 

  "GP Disc Wheel" (Perpendicular Type)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · For use with ordinary metal. Gap between polishing cloths is wide, preventing clogging even when rust or paint is peeled off. Since the polishing cloth comes into contact with the material to be polished at right angles, the material will not be damaged.
  · It has heat dissipation property, causing little or no distortion or burning of the material to be polished due to heat.
  [Applications]
  · Pre-plating polishing, metal surface polishing, rust removal, and deburring.
  · Polishing wood and plastic.
  · Tool used: disc grinder.

  Standard Price:	513,676 IDR-
  Days to Ship:	1 Day(s) or more

• 

  "GP Disc Wheel Soft" (Diagonal Type)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Has diagonally attached blades and gently contacts workpieces.
  · It has heat dissipation property, causing little or no distortion and burning of the material to be polished due to heat.
  [Applications]
  · Pre-plating polishing, metal surface polishing, rust removal, and deburring.
  · Polishing woodwork and plastic.
  · Tool used: disc grinder.

  Standard Price:	483,933 IDR-
  Days to Ship:	1 Day(s) or more

• 

  "GP Disk Wheel" (Direct Screw-in Type / Perpendicular Type)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · For use with ordinary metal. Gap between polishing cloths is wide, preventing clogging. As the substrate is smaller than the outer diameter of the polishing cloth, the lower surface and sides can be polished at the same time.
  · It has heat dissipation property, causing little or no distortion or burning of the material to be polished due to heat.
  · It can be installed in a single action (screw type).
  [Applications]
  · Pre-plating polishing, metal surface polishing, rust removal, and deburring. Polishing woodwork and plastic.
  · Tool used: disc grinder.

  Standard Price:	496,753 IDR-
  Days to Ship:	12 Day(s) or more

• 

  "Fabric Disc" (for Double-Action Sander / Non-Woven Fabric Abrasive)【2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Made from non-woven nylon fibers and alundum abrasive grains, thereby ensuring gentle grinding work, suitable for finished products.
  · Attached to the pad with Velcro tape for use.
  [Applications]
  · For removing light rust from metallic products and for glazing.
  · Smoothing out wood products.
  · Tool used: dual-action sander (Velcro type).

  Standard Price:	77,846 IDR
  Days to Ship:	1 Day(s)

• 

  ASTRA Hook-and-Loop Disc, Hole, Brown【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Dust suction type Double-Action Sander paper that uses alundum abrasive particles. (some hole diameters may not match.)
  · Velcro tape disc with a hole corresponding to the dust suction type dual action sander. Suction of the dust is conducted through 6 holes.
  · Pattern-coated abrasive cloth is coated with abrasive grain in an even pattern to provide synergistic beating, grinding, and polishing.
  · The pattern coating results in stronger polishing power with less clogging compared to conventional products. Furthermore, the ventilation creates a cooling effect, reducing the likelihood of burns.
  [Applications]
  · For polishing putty and surfacer on metal coatings. (Surface polishing)
  · Fabric and coating polish for woodwork, furniture, musical instruments, etc.
  · Sanding and surface smoothing of baked coatings.
  · Tool used: dust-suction type dual action sander. (Velcro Type)

  Standard Price:	77,846 IDR-
  Days to Ship:	1 Day(s) or more

Loading...