Disks（work material：general steel）

• 

  Art Disc【10 Pieces Per Package】

  NIPPON RESIBON

  Guarantees high performance and safety and achieves low levels of vibration and noise. A comfortable working space and a smooth grinding/polishing feeling have been achieved.

  Standard Price:	1,039,452 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Flap Disc Uni Top Mini Disc【5 Pieces Per Package】

  YANASE

  The back-up base is elastic with relatively good deflection, making this product easy to use.
  
  [Features]
  · Discs manufactured with polishing cloth surrounding the periphery.
  · Unlikely to clog or burn, preventing heat distortion and enabling continuous work.
  · "Autogenous" properties ensure a constant surface roughness from start to finish.
  · Suitable for removal of spatter and beads, metal deburring, rust removal, and polishing after welding.

  Standard Price:	144,154 IDR
  Days to Ship:	12 Day(s)

• 

  Norton, Vortex Blue Disc

  SAINTGOBAIN

  A revolutionary disc using Norton's state-of-the-art "Vortex technology"that is capable of everything from removing welding beads to finishing equivalent to P320 by adjusting the supplied pressure.
  
  [Features]
  · Norton's "Blue Disc" uses the state-of-the-art Vortex technology to reduce abrasion, coating non-woven cloth with special abrasive grain less prone to deterioration of sharpness.
  · By adjusting the amount of feed pressure applied by a grinder, this revolutionary product supports a wide range of work, from 'rough manual work' like removing welding beads, to 'fine manual work', like shading and removing scratches from stainless-steel surfaces.

  Standard Price:	388,462 IDR
  Days to Ship:	1 Day(s)

• 

  Techno Disc A/Z (A Type)【5 Pieces Per Package】

  ICHIGUCHI

  Recommended product manufactured on Ichiguchi original machinery boasting international patents. Alternatively shifting the center side of the polishing cloth slightly spectacularly boosts the heat dissipation and air cooling effect. It can now prevent scorching and clogging while keeping the grinding property of Techno Disc intact. Alumina abrasive material and zirconia abrasive material types are available.

  Standard Price:	628,643 IDR
  Days to Ship:	8 Day(s) or more

• 

  ScotchBrite ^TM Bevel

  3M

  [Features]
  · Removes dirt/films/scratches only on metal, and over-grinding does not occur.
  · It works well with uneven surfaces and provides a flexible and comfortable feel.
  · Work time can be shortened compared with the wire brush.
  · It is safer than wire brushes, since flying objects will not pose cut injury risks.
  · Prevents clogging and scorching.
  · After work, the adherence of coatings or bonding agents is improved

  Standard Price:	346,496 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Poly Light Disc S【5 Pieces Per Package】

  ICHIGUCHI

  Adopted a unique abrasive material that brings out an exceptionally glossy finish while maintaining the polishing strength of the non-woven fabric abrasive. S type has bristles set shorter than L type. Prevents nonwoven fabrics from getting caught on irregular surfaces, standing workpieces, etc.

  Standard Price:	874,751 IDR
  Days to Ship:	8 Day(s) or more

• 

  Mild Techno (Disc for Curved Surface Polishing)【5 Pieces Per Package】

  ICHIGUCHI

  Using a base much smaller than the disc diameter allows the abrasive cloth to warp and move freely. Polishing cloth firmly contacts the curved surface or irregular surface. Because the air cooling and heat radiation effect activates in the gap between polishing cloths, there is virtually no seizure or clogging. Suitable for removing metal rust, and grinding and polishing irregular surfaces.

  Standard Price:	875,102 IDR
  Days to Ship:	8 Day(s) or more

• 

  Radial Wheel RF10015 Series【5 Pieces Per Package】

  ICHIGUCHI

  Gap between polishing cloths is wide, preventing clogging even when rust or paint is peeled off. Furthermore, since the polishing cloth is upright, it will not scratch any workpiece by striking it strongly. Suitable for polishing and paint and rust removal of iron and nonferrous metals as well as wood stripping.

  Standard Price:	605,000 IDR
  Days to Ship:	9 Day(s) or more

• 

  Dual Disk【5 Pieces Per Package】

  NIPPON RESIBON

  With a compound structure with special base material, soft touch polishing work is possible.

  Standard Price:	642,365 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Good Wheel

  NEW REGISTON

  [Features]
  · Substrate is made of highly strong resin with excellent heat resistance. This allows safe grinding and polishing.
  · If the 15-hole orange bushing is removed, it can also be used with the 16-hole grinder

  Standard Price:	1,043,858 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Cross in Wheel (one-touch type)

  NEW REGISTON

  Using a cloth-in substrate, this absorbs rattling caused by vibration. New paper is adopted and performance is improved. It is an easy-to-install one-touch type with screws.
  
  [Features]
  · The "cloth-in base," which uses New Registon's own "glass cloth insert technology," absorbs vibrations and rattles.
  · The multi-blade wheel made of conventional zirconia enables high performance operation.
  · It is an easy-to-remove one-touch type with screws, so there is no center run-out.
  · "Cloth-in-Wheel" is a sister product for use with 15-hole and 16-hole.

  Standard Price:	442,560 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Grand Super High Pitch Paper【100 Pieces Per Package】

  SANKYO RIKAGAKU

  The connection type is hook-and-loop style.
  Easy-to-cut work materials are general steel/stainless steel/steel alloy/cast iron/aluminum/brass/gunmetal.
  The hook-and-loop style makes it easy to replace.
  Helps remove paint and rust.

  Standard Price:	1,049,434 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Disk Paper【10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · A disc polishing agent with superior heat-resistance, using a vulcanized fiber circuit board.
  · Uses silicon carbide abrasive grain.
  · Attach to a disc grinder to conduct efficient rust removal, deburring, releasing coating film, grinding of stone materials etc. (Pneumatic/electric dual use)
  · Use at a peripheral speed of 4,300 m/min.
  [Applications]
  · For removing welding beads: #14 - #24.
  · Removal of rust on ship or car bodies: #24 - #60.
  · Metal deburring: #40 - #80.
  · For polishing stone materials (medium finish): #80 - #120.
  · Rough removal of paint: #80 - #120.

  Standard Price:	248,615 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Hook & Loop Fastener Disc φ50【100 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · The count can be exchanged with a single touch.
  · Sharp cutting edge.
  · Abrasion marks are unlikely to appear.
  · Minimal clogging and long life.
  · Granule degree #120-#1000 is water resistant and can be combined with water.
  [Applications]
  · Automotive buffing repair process.
  · Various types of buffing in woodworking and furniture making.
  · Buffing of building paint and in interior construction.
  · Paint buffing in all types of vehicles.
  · Black baked paint buffing.

  Standard Price:	312,857 IDR-
  Days to Ship:	1 Day(s) or more

• 

  PS Paper PN/PR type【100 Pieces Per Package】

  SANKYO RIKAGAKU

  Manufactured granularity between #40 and #100. Utilizes a heat-resistant adhesive.

  Standard Price:	632,553 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Disc Paper - Esper Mini Zirconia (for Stainless Steel / Difficult-To-Cut Materials)

  MIYUKI SANGYO

  [Features]
  · It has durability 10-plus times higher than disc paper and 10 times higher than the offset grinding wheel.
  · It provides soft contact with the ground object, adsorbs well and does not cause deep scratches, making the next process easy.
  [Applications]
  · For removing spot-welding burrs on automobiles, home appliances, etc.
  · For removing weld beads for shipbuilding, steel frames, bridges, etc.
  · Metal deburring.
  · For pretreatment in plating and coating as well as rust removal.
  · Polishing wood and plastic.
  · Chamfering.
  · Tool used: Air/electric disc grinder.

  Standard Price:	116,336 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Single Action Art Disc【10 Pieces Per Package】

  NIPPON RESIBON

  Has an easily usable shape enabling low angle cutting. No tightening brackets are required for easier attaching/detaching.

  Standard Price:	1,263,677 IDR
  Days to Ship:	8 Day(s) or more

• 

  One-touch Happy Sanding Disc TOP 100xM10【20 Pieces Per Package】

  YANASE

  One-touch screw type. Delivers high performance at a low price.
  
  [Features]
  · One-touch screw type. High performance at a low cost.
  · No clogging or burning.
  · Quiet grinding noise

  Standard Price:	118,769 IDR
  Days to Ship:	12 Day(s)

• 

  Astra Disk【100 Pieces Per Package】

  NORITAKE COATED ABRASIVE

  Coating in an even pattern obtains an effect that cannot be obtained in conventional abrasive cloth paper, for prevention of seizure or clogging due to powerful abrasive force/air cooling effects.

  Standard Price:	659,262 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Poly Light Disc L【5 Pieces Per Package】

  ICHIGUCHI

  [Features]
  · Adopted a unique abrasive material that brings out an exceptionally glossy finish while maintaining the polishing strength of the non-woven fabric abrasive.
  · Rising width of 15 mm for outstanding durability

  Standard Price:	968,921 IDR
  Days to Ship:	8 Day(s) or more

• 

  SG Cool Top ø100【5 Pieces Per Package】

  YANASE

  [Features]
  · Highly effective air cooling. Scorching is prevented to ensure a long operational life.
  · Air enters by turning, and burning is reduced due to air cooling effect.
  · Made as a block type to ensure that a new blade always comes out.
  · Polishing cloth usage amount is the same as normal discs

  Standard Price:	168,286 IDR
  Days to Ship:	12 Day(s)

• 

  Polishing Fabric Disk

  YANASE

  Use alundum for general polishing and zirconia for heavy polishing such as bead polishing, etc. after welding.
  
  [Features]
  · Paper disc for polishing.
  · For polishing and pre-polishing general metals and wood materials, and cleaning metal surfaces.

  Standard Price:	698,000 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Sco-Light Disc M【5 Pieces Per Package】

  ICHIGUCHI

  Nonwoven fabric abrasive material that encloses a sufficient gap is used, so it only finishes the surface without engraving the workpiece. S (standard item) uses only non-woven fabric abrasive material.
  
  [Features]
  · Polishing cloth (sandpaper) is sandwiched between nonwoven fabric abrasive material.
  · Higher abrasive power than S type

  Standard Price:	944,705 IDR
  Days to Ship:	8 Day(s) or more

• 

  Skoo Light Disc S【5 Pieces Per Package】

  ICHIGUCHI

  Nonwoven fabric abrasive material that encloses a sufficient gap is used, so it only finishes the surface without engraving the workpiece. M (mixed item) is a nonwoven fabric abrasive material mixed with an abrasive polishing cloth. M (mixed item) has higher grinding power than S (standard item), and it is less likely to scorch.

  Standard Price:	762,815 IDR
  Days to Ship:	9 Day(s) or more

• 

  SG YANASE TOP ø100【10 Pieces Per Package】

  YANASE

  Causes little vibration and noise for easy work, safe and efficient use.
  
  [Features]
  · W type where long and short sandpaper pieces are arranged alternately.
  · Previously, when removing various types of beads, polishing with abrasive paper was done after grinding with an offset grinding stone, but now it is possible to grind and polish with a single piece.
  · Ideal for medium polishing.
  · Little clogging.
  · Very limited scorching.

  Standard Price:	135,539 IDR
  Days to Ship:	12 Day(s)

• 

  B-Top 100 × 15 mm【5 Pieces Per Package】

  YANASE

  Versatile type for general grinding and polishing.

  Standard Price:	43,143 IDR
  Days to Ship:	12 Day(s)

• 

  Uni Top 15 Type 100x15

  YANASE

  [Features]
  · Selectable from abundant abrasive grain and sizes.
  · Supports metals as well as stone materials and glass.
  · 4 types of abrasives are available.
  · Select the product depending on the usage.
  · The back-up base is elastic with relatively good deflection, making this product easy to use.
  · Type 15: Paper length is 15 mm.

  Standard Price:	1,082,833 IDR
  Days to Ship:	37 Day(s) or more

• 

  Silver disk for general polishing【10-25 Pieces Per Package】

  RESITON

  66 Multi-Blade Wheel Center Arrangement

  Standard Price:	2,753,516 IDR-
  Days to Ship:	8 Day(s) or more

• 

  See-through die for general polishing【10 Pieces Per Package】

  RESITON

  [Features]
  · The polishing surface is transparent: confirm the status as you grind.
  · The large cutting depth makes clogging difficult.
  · Excellent thermal dissipation effect prevents burning due to polishing.
  · High-strength glass substrate → Safe, flexible and facilitates long hours of work.
  · SA (alundum) type: Provides excellent finish. Demonstrates performance in any number of uses such as stainless steel and difficult-to-cut materials.
  · SZ (zirconia) Type: Outstanding polishing performance. Ideal for bead grinding, heavy grinding and cast polishing after welding

  Standard Price:	994,905 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Rico Disc, φ100, Zirconia Abrasive Grains【10 Pieces Per Package】

  RIKEN CORUNDUM

  [Features]
  · Used to make the customer's finished image a 'reality'.
  · Heavy grinding of a wide range of materials.
  · For heavy grinding at high load grinding (for zirconia grinding material).
  · Ideal for a wide range of materials, from iron and steel to aluminum

  Standard Price:	729,342 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Rico Magic φ125 with Holes【50-100 Pieces Per Package】

  RIKEN CORUNDUM

  Velcro type where abrasive paper can be replaced easily for repeated use. Demonstrates excellent durability with tough abrasive grains and durable paper quality. Due to the cushioning effect of the Velcro cloth, it is ideal for polishing and finishing metal, wood, fabrics on vehicles and furniture as well as painted surfaces without causing deep scratches.

  Standard Price:	595,416 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Rico Magic φ125 without Holes【100 Pieces Per Package】

  RIKEN CORUNDUM

  Velcro type where abrasive paper can be replaced easily for repeated use. Demonstrates excellent durability with tough abrasive grains and durable paper quality. Due to the cushioning effect of the Velcro cloth, it is ideal for polishing and finishing metal, wood, fabrics on vehicles and furniture as well as painted surfaces without causing deep scratches.

  Standard Price:	872,415 IDR-
  Days to Ship:	8 Day(s) or more

• 

  RICO Disc φ100, Alundum Abrasive Grain 99-SUSA【10 Pieces Per Package】

  RIKEN CORUNDUM

  A powerful tool for grinding and polishing stainless steel. Uses clog-proof abrasive material to eliminate scorching. A powerful tool for grinding and polishing stainless steel. Can also be used for aluminum and iron.

  Standard Price:	685,679 IDR
  Days to Ship:	9 Day(s) or more

• 

  Polishing Cloth Hard Disc 2【10 Pieces Per Package】

  KURE GRINDING WHEEL

  Polishing disc with polishing fabric arranged in a fan shape on top of a plastic backing plate. Use of carefully selected materials achieves excellent cutting feel and durability. In addition, the one-touch type is easy to install and has a threaded structure to prevent center runout.

  Standard Price:	1,064,853 IDR
  Days to Ship:	8 Day(s) or more

• 

  Happy TOP【1-20 Pieces Per Package】

  YANASE

  [Features]
  · Low cost yet high performance. Yanase's No. 1 disc.
  · Compared to the UNI Top disc, its paper specification is economical and reduce costs.
  · Abundant particle sizes for rough cutting to semi-finished grinding.
  · No clogging and unlikely to burn.
  · There is also a screw type one-touch type "One-Touch Happy TOP"

  Standard Price:	83,538 IDR-
  Days to Ship:	12 Day(s) or more

• 

  3M^TM Roloc ^TM Disc

  3M

  Product uses aluminum oxide abrasive grain. Can be used for a wide range of purposes from ordinary steel to stainless steel and non-ferrous metals.
  
  [Features]
  · A disc with an outer diameter of 50 mm that's used for the collet chuck type angle grinder (electric/pneumatic).
  · It can also be attached directly to male screws without using the shaft.
  · One-touch attachment and removal using a screw is possible without a replacement tool.
  · Various products are arrayed from cutting applications to finishing applications, suitable for cutting machining, cutting, bore drilling, press, grinding machining, spot welding, and other post-processing from scratch/burr removal to finish polishing.

  Standard Price:	30,769 IDR-
  Days to Ship:	12 Day(s)

• 

  ScotchBrite ^TM EXL Unifoil

  3M

  A CNS product with very strong polishing power and a long life. Can also be used for punching work, making it suitable for handheld automatic specialized machines.
  
  [Features]
  · Increased grade types of EXL Uni Wheel boast excellent durability and polishing ability. The product is fit with a Roloc button for easy mounting, simply screw it in.
  · For applications such as deburring edges, removing paint and oxidized coatings, etc., without over-scraping the polished material

  Standard Price:	167,693 IDR
  Days to Ship:	12 Day(s)

• 

  ScotchBrite ^TM Roloc Metakon Disc

  3M

  For applications such as removing paint, oxidized coatings, etc., without over-scraping the polished material.

  Standard Price:	67,077 IDR
  Days to Ship:	1 Day(s)

• 

  ScotchBrite ^TM CNS Cut Foil

  3M

  [Features]
  · Suitable for removing stubborn dirt and oxide film from flat surfaces.
  · Exhibits the appropriate polishing force while not over-grinding like a grindstone.

  Standard Price:	539,830 IDR
  Days to Ship:	12 Day(s)

• 

  Sand wheel

  NEW REGISTON

  For finish polishing. Specially constructed mesh grinding disc
  
  [Features]
  · Because it is a mesh grindstone, there is no clumping or clogging even with sticky workpieces.
  · Flexible and can grind and polish softly.
  · Can be used safely at high speed due to the special processing of the reinforced materials.

  Standard Price:	1,245,607 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Free Sand

  NEW REGISTON

  For finish polishing. Stacking 2-5 discs allows free adjustment of softness and polishing capability. A mesh cloth is used as the base material to prevent clogging, welding, scorching and distortion.
  
  [Features]
  · Stacking 2-5 discs and changing their quantity allows free adjustment of softness and polishing capability.
  · A mesh cloth is used as the base material to prevent clogging, welding, scorching and distortion.
  · It has excellent flexibility and can polish any shape.
  · You can use it safely without ever sacrificing the flexibility unique to Free Sand because it employs the "cloth-in pad," which uses New Registon's own "glass cloth insert technology."

  Standard Price:	586,128 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Mini Sandwheel

  NEW REGISTON

  Small-diameter type suitable for narrow places and small areas.
  
  [Features]
  · Mesh disc prevents adhesion and clogging, even when using adhesive abrasive materials.
  · This product grinds and polishes softly.

  Standard Price:	858,454 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Mini FC Disc

  NEW REGISTON

  [Features]
  · Small-diameter disc suitable for narrow places and small areas. Since abrasive grains are attached to cushioning fibers, a clean finish can be achieved without over-grinding the steel.
  · Breathable so clogging doesn't occur and there are no friction burns.

  Standard Price:	314,100 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Mini Quick Paper

  NEW REGISTON

  Since it is a screw-in type, it can be quickly attached/removed without tools. Ideal for curved and rounded surfaces in addition to flat surfaces. Small-diameter type suitable for narrow places and small areas.

  Standard Price:	99,000 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Single action P wheel

  NEW REGISTON

  A multi-bladed paper wheel. It has a feather touch polishing feeling with absolutely no wobble. The especially tiresome polishing burns have been thoroughly eliminated. It is an easy-to-install one-touch type with screws.
  
  [Features]
  · The paper has been specially processed to make it more difficult to clog and not scorch or warp with complete coverage.
  · Can grind to the end without dulling.
  · It is an easy-to-install one-touch type with screws, so there is no center run-out.
  · NRSP wheel sister product

  Standard Price:	1,318,422 IDR-
  Days to Ship:	9 Day(s) or more

Loading...