Disks（Type：Non-woven fabric disc）

• 

  Hard Disc 2【10 Pieces Per Package】

  KURE GRINDING WHEEL

  [Features]
  · Polishing disc with abrasive cloth arranged in a fan shape on a plastic back plate.
  [Applications]
  · General grinding, polishing and deburring of metals, smoothing weld seams on steel, pre-grinding and scouring off rust before plating or painting

  Standard Price:	1,096,800 IDR
  Days to Ship:	14 Day(s) or more

• 

  Norton, Vortex Blue Disc

  SAINTGOBAIN

  A revolutionary disc using Norton's state-of-the-art "Vortex technology"that is capable of everything from removing welding beads to finishing equivalent to P320 by adjusting the supplied pressure.
  
  [Features]
  · Norton's "Blue Disc" uses the state-of-the-art Vortex technology to reduce abrasion, coating non-woven cloth with special abrasive grain less prone to deterioration of sharpness.
  · By adjusting the amount of feed pressure applied by a grinder, this revolutionary product supports a wide range of work, from 'rough manual work' like removing welding beads, to 'fine manual work', like shading and removing scratches from stainless-steel surfaces.

  Standard Price:	352,308 IDR
  Days to Ship:	12 Day(s)

• 

  GP Sander UNILON 100x25xM10【1-5 Pieces Per Package】

  YANASE

  Grinds softly.
  
  [Features]
  · Polishes the surface softly.
  · For sealer sanding of woodwork curved surfaces.
  · For hairline machining of stainless steel and aluminum.
  · For finishing woodworking and coated surfaces.
  · It is also ideal for satin finishing.

  Standard Price:	1,078,559 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Nylon Disc【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Uses nylon abrasives made by reinforcing tangled nylon fibers with abrasive dust. Compared to when the workpiece comes into direct contact with the abrasive in paper abrasive cloths, the fibers embedded in nylon abrasive agent act as a cushion, preventing excessive snagging of the workpiece. Mainly used for polishing work. No clogging as it has significant autogenous action.
  [Applications]
  · For removing burn of welding, sanding sealers at curved surfaces in woodworking, finishing before coating, satin finish, and mirror surface pretreatment.
  · Tool used: disc grinder.

  Standard Price:	810,857 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Disk Type New Soft Lap【1-25 Pieces Per Package】

  UHT

  An abrasive with abrasive grains kneaded into nonwoven fabric. There is no need to apply abrasive as there is with buffs. In addition, as the density is not as high as buffs, it supports high-speed rotation. Suitable for polishing key grooves and the inner diameter of pipes. In this type, a new soft lap is pinched with lap shafts and fixed with screws for use.

  • STOCK

  Standard Price:	351,907 IDR-
  Days to Ship:	1 Day(s) or more

• 

  ScotchBrite ^TM Bevel

  3M

  [Features]
  · Removes dirt/films/scratches only on metal, and over-grinding does not occur.
  · It works well with uneven surfaces and provides a flexible and comfortable feel.
  · Work time can be shortened compared with the wire brush.
  · It is safer than wire brushes, since flying objects will not pose cut injury risks.
  · Prevents clogging and scorching.
  · After work, the adherence of coatings or bonding agents is improved

  Standard Price:	346,496 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Scotch-Brite Bevel Air (For Air-Powered Grinders)

  3M

  Can be attached to a φ100 mm air angle grinder. (Thanks to the hole diameter being processed into a special shape, it can also be attached to a 15 mm hole diameter grinder.) Flexible structure that adapts well to uneven grinding surfaces. Allows removal of only the oxide film and surface dirt on metals, without shaving off too much. Has breathability and cooling effect, won't cause clogging or burning.

  • STOCK

  Standard Price:	337,077 IDR-
  Days to Ship:	1 Day(s)

• 

  Poly Light Disc S【5 Pieces Per Package】

  ICHIGUCHI

  Adopted a unique abrasive material that brings out an exceptionally glossy finish while maintaining the polishing strength of the non-woven fabric abrasive. S type has bristles set shorter than L type. Prevents nonwoven fabrics from getting caught on irregular surfaces, standing workpieces, etc.

  Standard Price:	874,751 IDR
  Days to Ship:	8 Day(s) or more

• 

  Unilon Black Bevel 100xM10【5 Pieces Per Package】

  YANASE

  Does not overcut or allow scattering like a wire brush, allowing even beginners to work with confidence.
  
  [Features]
  · Bevel type that can also be used easily on corners.
  · Since the extra thick Unilon woven fabric is coated with abrasive grain, there is no scattering as with wire brushes, and work can be conducted safely.
  · It produces a beautiful finished surface without scraping too much, and is easy for beginners to use too.
  · Extremely easy-to-use bevel type that can easily be installed to grinders without tools and used to the very end

  Standard Price:	1,516,167 IDR
  Days to Ship:	9 Day(s) or more

• 

  SG Unilon Black, 100 pcs, Soft【5 Pieces Per Package】

  YANASE

  Wipes away coating and rust without shaving the base material.
  
  [Features]
  · Wipes away coating and rust without shaving the base material.
  · Allows work to be performed safely without the scattering of a wire brush.
  · No deep scratches.
  · An attractive finished surface.
  · Has excellent polishing power

  Standard Price:	244,615 IDR
  Days to Ship:	12 Day(s)

• 

  SG Mirror Surface One Shot Disc ø100

  YANASE

  Shows its power during pre-buffing processes.
  
  [Features]
  · Shows its power during pre-buffing processes.
  · This is a new type of polishing material created by impregnating Unilon fibers with abrasive to which foamed urethane is then applied.
  · It is elastic so that a beautiful finished surface is achieved, without leaving any deep scratches.

  Standard Price:	1,664,667 IDR
  Days to Ship:	9 Day(s) or more

• 

  Restore Sander 100 × 16 mm【1-10 Pieces Per Package】

  YANASE

  Ideal for removal of rust, coating, and spot welding.
  
  [Features]
  · Rust is no problem at all.
  · For removal of rust and paint.
  · Scratch blurring.
  · For spot welding stripping and deburring

  Standard Price:	660,500 IDR-
  Days to Ship:	9 Day(s) or more

• 

  New Soft Lap【25-40 Pieces Per Package】

  UHT

  An abrasive with abrasive grains kneaded into nonwoven fabric. There is no need to apply abrasive as there is with buffs. In addition, as the density is not as high as buffs, it supports high-speed rotation. Suitable for polishing key grooves and the inner diameter of pipes. In this type, a new soft lap is pinched with lap shafts and fixed with screws for use.

  • STOCK

  Standard Price:	402,422 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Skoo Light Disc S【5 Pieces Per Package】

  ICHIGUCHI

  Nonwoven fabric abrasive material that encloses a sufficient gap is used, so it only finishes the surface without engraving the workpiece. M (mixed item) is a nonwoven fabric abrasive material mixed with an abrasive polishing cloth. M (mixed item) has higher grinding power than S (standard item), and it is less likely to scorch.

  Standard Price:	762,815 IDR
  Days to Ship:	9 Day(s) or more

• 

  Unilon Purple Soft, 100x16 (15)【5 Pieces Per Package】

  YANASE

  Long service life type Unilon Black.
  
  [Features]
  · Compared with Unilon Black, it features a longer service life and is economical.
  · Allows work to be performed safely without the scattering of a wire brush.
  · No deep scratches.
  · Attractive finished surface

  Standard Price:	315,385 IDR
  Days to Ship:	12 Day(s)

• 

  SG Unilon Black/Hard

  YANASE

  Wipes away coating and rust without shaving the base material.
  
  [Features]
  · Wipes away coating and rust without shaving the base material.
  · Allows work to be performed safely without the scattering of a wire brush.
  · No deep scratches.
  · An attractive finished surface.
  · Has excellent polishing power

  Standard Price:	1,336,100 IDR
  Days to Ship:	16 Day(s) or more

• 

  Unilon Black, Soft

  YANASE

  Wipes away coating and rust without shaving the base material.

  Standard Price:	134,989 IDR
  Days to Ship:	8 Day(s) or more

• 

  SG Unilon Purple/Hard【5 Pieces Per Package】

  YANASE

  Long service life type Unilon Black.
  
  [Features]
  · Long life twice or more that of black type. For heavy users.
  · Highly flexible and fits well to workpieces.
  · Removes oxide film, etc. without shaving too much of the base material

  Standard Price:	2,165,833 IDR
  Days to Ship:	39 Day(s) or more

• 

  Unilon Disc【1-25 Pieces Per Package】

  YANASE

  [Features]
  · A disc made of special fiber of exceptional elasticity.
  · Without biting, a smooth finished surface can be obtained.
  · Little clogging and dust, capable of polishing both iron and non-ferrous metals.

  Standard Price:	586,167 IDR-
  Days to Ship:	9 Day(s) or more

• 

  SG, Unilon Disc (S/M)【1-5 Pieces Per Package】

  YANASE

  Ideal for blurring scratches and cleaning.
  
  [Features]
  · For blurring scratches and cleaning.
  · Polishing without making deep scratches.
  · Flexible and fits perfectly to curved surfaces as well.
  · MIX type is a mixture of mesh polishing cloth and Unilon nonwoven fabric that makes clogging less likely to occur, increases service life, and improves polishing power

  Standard Price:	227,692 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Unilon Disc (S/M) 100 × 15 mm【5 Pieces Per Package】

  YANASE

  Ideal for blurring scratches and cleaning.
  
  [Features]
  · For blurring scratches and cleaning.
  · Polishing without making deep scratches.
  · Flexible and fits perfectly to curved surfaces as well.
  · We also manufacture a straight type with soft contact.
  · Abrasive grain-free type containing no abrasive grains can also be manufactured

  Standard Price:	224,308 IDR-
  Days to Ship:	Quote

• 

  ScotchBrite ^TM EXL Unifoil

  3M

  A CNS product with very strong polishing power and a long life. Can also be used for punching work, making it suitable for handheld automatic specialized machines.
  
  [Features]
  · Increased grade types of EXL Uni Wheel boast excellent durability and polishing ability. The product is fit with a Roloc button for easy mounting, simply screw it in.
  · For applications such as deburring edges, removing paint and oxidized coatings, etc., without over-scraping the polished material

  Standard Price:	167,693 IDR
  Days to Ship:	12 Day(s)

• 

  ScotchBrite ^TM Roloc Metakon Disc

  3M

  For applications such as removing paint, oxidized coatings, etc., without over-scraping the polished material.

  Standard Price:	67,077 IDR
  Days to Ship:	1 Day(s)

• 

  ScotchBrite ^TM CNS Cut Foil

  3M

  [Features]
  · Suitable for removing stubborn dirt and oxide film from flat surfaces.
  · Exhibits the appropriate polishing force while not over-grinding like a grindstone.

  Standard Price:	539,830 IDR
  Days to Ship:	12 Day(s)

• 

  Mini FC Disc

  NEW REGISTON

  [Features]
  · Small-diameter disc suitable for narrow places and small areas. Since abrasive grains are attached to cushioning fibers, a clean finish can be achieved without over-grinding the steel.
  · Breathable so clogging doesn't occur and there are no friction burns.

  Standard Price:	314,100 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Norton, Bear-Tex Disc Brush

  SAINTGOBAIN

  A disc with a nylon base with a non-woven abrasive applied and firmly set. It can speedily remove rust, dirt and coating without scraping the base.
  
  [Features]
  · A disc type brush with a nylon base with a non-woven (Bear-tex) abrasive applied and firmly set.
  · It can remove stubborn rust, dirt, oil film, coating and the like without scraping the base.
  · Allows work to be performed safely without scattering the wire like a wire brush

  Standard Price:	229,231 IDR
  Days to Ship:	1 Day(s)

• 

  Norton, Vortex 3D Non-Woven Fabric Disc

  SAINTGOBAIN

  Quick change nonwoven fabric disc using the latest vortex technology. "Top", "Side", "Bottom" 3D work is possible.
  
  [Features]
  · The three-dimensional structure that allows the "top", "bottom", and "side" of the disc to be used supports work that uses complicated shapes and inner circumference polishing.
  · Exhibits high speed, durability, and performance with Norton's original "Vortex Technology".
  · It can support a range from burn removal work to deseaming work.
  · Dedicated quick change holder is equipped as standard and makes 3D work possible

  Standard Price:	95,385 IDR
  Days to Ship:	12 Day(s)

• 

  Norton, Cleaning Non-Woven Fabric Disc

  SAINTGOBAIN

  For buffing and dirt removal before applying paint and coating. Quick-change non-woven disc for finish polishing. It can remove stubborn dirt on workpiece simply by tracing it.
  
  [Features]
  · For buffing, dirt removal and finish polishing before applying paint and coating.
  · It can easily remove dirt stuck on workpieces simply by tracing it.
  · "Vortex 3D Brush Quick Change" can be used for quick elimination of marks after grinding

  Standard Price:	33,231 IDR
  Days to Ship:	12 Day(s)

• 

  "Fabric Disc" (for Double-Action Sander / Non-Woven Fabric Abrasive)【2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Made from non-woven nylon fibers and alundum abrasive grains, thereby ensuring gentle grinding work, suitable for finished products.
  · Attached to the pad with Velcro tape for use.
  [Applications]
  · For removing light rust from metallic products and for glazing.
  · Smoothing out wood products.
  · Tool used: dual-action sander (Velcro type).

  Standard Price:	77,846 IDR
  Days to Ship:	1 Day(s)

• 

  "GP Nylon Disc" (Direct Screw-in Type)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · It can be installed in a single action (screw type).
  · Uses a nylon abrasive agent in which abrasive is set between intertwined nylon fibers, so compared to when the workpiece comes into direct contact with the abrasive in paper abrasive cloths, the fibers embedded in nylon abrasive agent act as a cushion, preventing excessive snagging of the workpiece. Mainly used for polishing work. No clogging as it has significant autogenous action.
  [Applications]
  · For removing burn of welding, sanding sealers at curved surfaces in woodworking, finishing before coating, satin finish, and mirror surface pretreatment.
  · Tool used: disc grinder.

  Standard Price:	873,231 IDR-
  Days to Ship:	1 Day(s)

• 

  "New Nylon Disc" (High-Speed Rotation Type / Direct Screw-in Type)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · It can be installed in a single action (screw type).
  · Even without adjusting the rotation speed, there is no burning or clogging. (High Rotation Model)
  · Uses nylon abrasives made by reinforcing tangled nylon fibers with abrasive dust.
  · It prevents over-grinding of non-abrasive materials.
  [Applications]
  · For removing burn of welding, sanding sealers at curved surfaces in woodworking, finishing before coating, satin finish, mirror surface pretreatment, and paint removal.

  Standard Price:	797,265 IDR-
  Days to Ship:	12 Day(s)

• 

  Nylon Mini Disc【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Uses a nylon abrasive agent in which abrasive is set between intertwined nylon fibers, so compared to when the workpiece comes into direct contact with the abrasive in paper abrasive cloths, the fibers embedded in nylon abrasive agent act as a cushion, preventing excessive snagging of the workpiece.
  · Beautiful hairline processing is possible by using the side for straightening the line.
  [Applications]
  · For removing burns on stainless steel, aluminum and welding components. For paint film removal and mirror finishing.
  · Tool used: disc grinder.

  Standard Price:	639,714 IDR
  Days to Ship:	12 Day(s)

• 

  GP Cleaning Disc【1-5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Polishing agent with softness for finishing with abrasive powder bound into special nylon non-woven fabric (silicon carbide).

  Standard Price:	372,991 IDR-
  Days to Ship:	1 Day(s) or more

• 

  GP Cleaning Wheel, GPCW

  TRUSCO NAKAYAMA

  [Features]
  · With flexibility, it fits well to uneven surfaces.
  · Cleans the surface without scraping the base coating.
  [Applications]
  · Rust removal, paint removal, cleaning before welding.

  • STOCK

  Standard Price:	64,616 IDR-
  Days to Ship:	1 Day(s)

• 

  Fiber disk N-10【10 Pieces Per Package】

  NORITAKE COATED ABRASIVE

  [Features]
  · Abrasive supports applications in grinding and polishing. Can be used with various grinders.
  · N-10: Fiber disc capable of high performance grinding and having a long service life.
  · C abrasive material/A abrasive material can be selected according to the application.

  Standard Price:	238,324 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Non-Woven Fabric Wheel

  NORITAKE COATED ABRASIVE

  Strong polishing force and durable. Has a wide range of uses from deburring to rust removal.

  Standard Price:	733,589 IDR
  Days to Ship:	11 Day(s) or more

• 

  Scotch-Brite Multi-Purpose Finishing Disc

  3M

  All-in-one product with Scotch-Brite nonwoven surface processed material reduction in an umbrella disc shape. Allows for a clean finish and increased work efficiency.

  • STOCK

  Standard Price:	215,693 IDR
  Days to Ship:	1 Day(s)

• 

  Scotch-Brite CNS Bevel, Black

  3M

  Allows one touch attachment from disc grinder. Allows for removal of only films, dirt, and micro scratches. Will not scorch or clog. Safer than a wire brush.　

  • STOCK

  Standard Price:	505,538 IDR
  Days to Ship:	1 Day(s)

• 

  Scotch-Brite Metal Conditioning Disc

  3M

  Does not over grind materials and achieves a smooth finish. Improves the coating or adhesive adhesion. Non-woven type so doesn't clog. Install with hook-and-loop type. Applicable holders and a hook-and-loop + center locking mechanism.

  Standard Price:	124,462 IDR-
  Days to Ship:	1 Day(s)

• 

  Scotch-Brite CNS Disc

  3M

  Excellent flexibility, a suitable weight and fits well into the bumps of the object to be polished.

  • STOCK

  Standard Price:	368,154 IDR
  Days to Ship:	1 Day(s)

• 

  3M Cubitron II "Fiber Disc" (for Steel and Aluminum) 982C Outer Diameter 102 mm

  3M

  Sustains a good sharpness by employing the triangle ceramic abrasive grain, Cubitron II.
  

  • STOCK

  Standard Price:	64,615 IDR-
  Days to Ship:	1 Day(s)

• 

  Cubitron II Fiber Disc 987C

  3M

  Use of triangular ceramic abrasive grain Cubitron II allows for long-lasting sharpness.

  • STOCK

  Standard Price:	64,615 IDR-
  Days to Ship:	1 Day(s)

• 

  Sco-Light Flap S

  ICHIGUCHI

  Nonwoven fabric abrasive material has been processed into a flap shape. Suitable for work on both flat surfaces and irregularly shaped surfaces. For rough to fine finishing.
  
  [Features]
  · Made of nonwoven fabric abrasive material only, for a light finish with a soft touch.

  Standard Price:	1,657,433 IDR
  Days to Ship:	47 Day(s) or more

• 

  Sco-Light Flap M【5 Pieces Per Package】

  ICHIGUCHI

  Nonwoven fabric abrasive material has been processed into a flap shape. Suitable for work on both flat surfaces and irregularly shaped surfaces. Supports rough to fine finishing.
  
  [Features]
  · Polishing cloth (sandpaper) is sandwiched between nonwoven fabric abrasive material.
  · Higher abrasive power than S type, and can also be used for hairline machining.

  Standard Price:	1,895,000 IDR-
  Days to Ship:	9 Day(s) or more

• 

  S/C Disk

  ICHIGUCHI

  Light, safe polishing disc made from cloth (non-woven fabric) that fits surfaces ranging from flat to curved surfaces. Attach the dedicated pads for work on flat surfaces. Remove the dedicated pads for work on curved surfaces.
  
  [Features]
  · It is a nonwoven fabric abrasive disc reinforced with a strong fabric.
  · Fits well to both flat and curved surfaces for firm polishing.
  · The center is dented, which makes it easy to handle and simple to install.
  · If a dedicated pad of 96ø is attached, smooth work is possible even on flat surfaces.
  · If a dedicated pad of 68ø is attached, even curved surfaces can be polished easily.
  · Securely fits curved surfaces in addition to flat surfaces.
  · Enables smooth polishing with no clogging.
  · For removing secondary burrs after machining, spatter, rust on forged parts, burrs, and parting lines.
  · For machining scratches and mismatch leveling.
  

  Standard Price:	82,710 IDR
  Days to Ship:	8 Day(s) or more

Loading...