Inner Diameter Measuring Instruments

• 

  Inside Micrometer

  NIIGATA SEIKI (SK)

  An instrument for measuring internal diameters, equipped as standard with a Japanese-made ring gauge for immediate use.
  [Features]
  · Immediate use is possible with standardly equipped ring gauge for zero point adjustment.
  · With reference ring gauge. MC304-30I: φ5 (diameter 5 mm), MC304-50I: φ25 (diameter 25 mm).
  · Equipped with constant pressure device.
  · Measurement surface has a carbide tip.
  [Applications]
  · Can be used for internal diameter dimension measurement.

  • STOCK

  Standard Price:	2,894,017 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Adding Rod for Bore Gauge

  MITUTOYO

  Measurement of Inside Diameter
  [Features]
  This is a bore gauge for measuring blind holes that offers you the following benefits:
  You can measure the inside diameter close to the bottom of blind holes.
  Contact points are carbide giving you high durability and wear resistance.
  [Specifications]Length(mm):125-1000
  Pipe diameter(mm):8.7-15

  Standard Price:	3,767,692 IDR-
  Days to Ship:	20 Day(s) or more

• 

  Three-point Inner Diameter Measuring Equipment "ABS Borematic"

  MITUTOYO

  Standard Price:	21,250,770 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Hole Test (Three-point Type Internal Micrometer)

  MITUTOYO

  Standard Price:	27,772,770 IDR-
  Days to Ship:	Quote

• 

  345/145 Series Caliper-Type Internal Micrometer IMP

  MITUTOYO

  An IMP-type micrometer. Compatible with the 345 and 145 series.
  [Measuring Surface] Carbide tip
  [Pressure Regulator] Ratchet stop type

  • STOCK

  Standard Price:	5,824,308 IDR-
  Days to Ship:	1 Day(s)

• 

  339/139/140 Series, Extension Pipe Type Internal Micrometer IMJ-MJ/IMJ

  MITUTOYO

  [Features]
  ·A wide range of internal measurements can be performed by combining several "joint pipes" in one body.
  ·Measuring face with a cemented carbide tip
  ·Base point adjustment is required.
  ·A separate reference gauge is required for base point adjustment.

  Standard Price:	14,615,385 IDR
  Days to Ship:	Quote

• 

  Stand inner diameter measuring instrument BST-1B

  CITIZENSEIMITSU

  [Features]
  ·Inner diameter measuring tool with wide measuring range
  ·With measuring depth and measuring force adjustment function
  ·Horizontal stand

  Standard Price:	58,744,569 IDR
  Days to Ship:	10 Day(s) or more

• 

  Extension Rod

  OZAKI MFG (PEACOCK)

  [Features]
  OZAKI MFG, extension rod for deep hole inner diameter measuring tool.
  Compatible main body: EMCC-2, EMCC-3, EMCC-4, EMCC-5, EMCC-6

  Standard Price:	4,483,275 IDR
  Days to Ship:	10 Day(s) or more

• 

  Dial Bore Gauge EA725FN-1

  ESCO

  【Product Specifications】
  ・Minimum division-0.002mm
  ・Gauge dia.-42mm
  ・Measurement range…Dia. 2.7 to 6.76mm
  ・Max. measurement depth…20.6mm

  Standard Price:	33,099,819 IDR
  Days to Ship:	9 Day(s) or more

• 

  Shallow Hole Cylinder Gauge, CGF Series

  AS ONE

  It is possible to measure the inner diameter near the bottom of the hole.
  Measurement range (mm): 15 to 150

  Standard Price:	6,222,350 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Digimatic Hole Test Set

  MITUTOYO

  Standard Price:	72,346,154 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Type 2 Hole Test (Three-point Type Internal Micrometer)

  MITUTOYO

  Standard Price:	10,756,770 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Digital 3-Point Micrometer

  NIIGATA SEIKI (SK)

  Inside diameter measurement instrument that allows high-precision measurement for three-point inside diameter measurement.
  [Features]
  · Immediate use is possible with standardly equipped ring gauge for zero point adjustment.
  · The digital display is easy to see.
  · With constant pressure device for minimum individual variability.
  · Allows measurement almost to the bottom of blind holes.
  · With reference ring gauge; measurement surface has carbide tip.
  · Equipped with auto display off function. (Approximately 5 minutes)
  [Applications]
  · Three gauge heads can be used for precision measurement of the internal diameter.

  Standard Price:	14,124,881 IDR
  Days to Ship:	13 Day(s) or more

• 

  CITIXEN Stand Inner Diameter Measuring Tool BST-2B

  CITIZENSEIMITSU

  For inner diameter measurement of precision small accessories.
  [Model]Without indicator / with indicator 3M-100

  Standard Price:	34,865,250 IDR
  Days to Ship:	20 Day(s)

• 

  Small Diameter Cylinder Gauge

  OZAKI MFG (PEACOCK)

  Dial gauge is not included.
  
  [Features]
  · Conversion rods made of carbide alloy are also available (CC-01, CG-01).
  · Recommended dial gauge: 17Z/57B (scale interval 0.01 mm): 15Z/5F (scale interval 0.001 mm)

  Standard Price:	3,751,526 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Standard Shaped Cylinder Gauge

  OZAKI MFG (PEACOCK)

  Dial gauge is not included.
  
  [Features]
  · Cemented carbide is used for the tip of the gauge head.
  · For deep holes, types with longer hand grips can also be manufactured.
  · Replacement rods made of highly abrasion resistant carbide alloy are also available.
  · Recommended dial gauge: 17Z/57B (scale interval 0.01 mm): 15Z/5F (scale interval 0.001 mm)

  Standard Price:	4,966,750 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Cylinder Gauge for Shallow Hole

  OZAKI MFG (PEACOCK)

  [Features]
  · For shallow holes, products with longer hand grips can also be manufactured.
  · Inner diameter can be measured up to near the base of the blind hole.
  · Recommended dial gauge: 17Z/57B (scale interval 0.01 mm): 15Z/5F (scale interval 0.001 mm).
  · Special types with length below handle can also be manufactured (short type/long type)

  Standard Price:	4,662,992 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Deep Hole Inner Diameter Measuring Instrument

  OZAKI MFG (PEACOCK)

  Can measure deep internal diameters (maximum length 10 m). Using the digital display, anyone can take measurements easily without any special skills. Internal diameter dimensions are measurable within ±0.6 mm.

  Standard Price:	17,861,122 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Cylinder Gauge CC-R Series

  OZAKI MFG (PEACOCK)

  Materials to be measured (workpieces) are not easily scratched because the part that makes contact with the measurement target (workpiece) has been cut into a large rounded shape, which is then quenched and polished.

  Standard Price:	5,500,492 IDR
  Days to Ship:	14 Day(s) or more

• 

  Cylinder Gauge CG-R Series

  OZAKI MFG (PEACOCK)

  Materials to be measured (workpieces) are not easily scratched because the part that makes contact with the measurement target (workpiece) has been cut into a large rounded shape, which is then quenched and polished.

  Standard Price:	5,554,323 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Inner/outer chamfer gauge

  ESCO

  The diameter can be measured by pressing the plunger directly into the chamfered hole.
  There are internal and external measurement targets.

  Standard Price:	10,786,007 IDR-
  Days to Ship:	8 Day(s) or more

• 

  (90 degrees )Bevel Gauge EA725AA-3

  ESCO

  【Product Specifications】
  ・Measure a diameter by directly imposing the plunger on the beveled hole.
  ・Target…Inside measurement
  ・Applicable angle…0 to 90°
  ・Measurement range…0 to 25mm

  Standard Price:	9,816,651 IDR
  Days to Ship:	9 Day(s) or more

• 

  Small hole gauge Hemispherical ball

  ESCO

  Hemispherical measuring part enables measurement of very shallow small holes, slots, grooves and dents.

  Standard Price:	1,299,582 IDR
  Days to Ship:	8 Day(s) or more

• 

  Small Hole Gauge EA725FK-21

  ESCO

  【Product Specifications】
  ・Ball-Semi sphere
  ・Length-50mm
  ・Adapt the gauge to hole size and measure the ballwith a micrometer.
  ・As the total length is 50mm, useful for a work in narrower places.
  ・Specification…3.2 to 3.8mm

  Standard Price:	1,138,492 IDR
  Days to Ship:	8 Day(s) or more

• 

  TECLOCK, Micro Hole Test, Measuring Range 1.7 to 3.2 mm

  TECLOCK

  [Features]
  ·Achieved repeatability precision of 2 µm for small inner diameter, which is difficult to measure.
  [Applications]
  ·Used for measuring small inner diameters from ø1.70 to ø3.20
  [Product Specifications]
  ·Measuring range (mm) probe number 012/013/014/015: 1.70 to 2.10/2.10 to 2.40/2.30 to 2.70/2.70 to 3.20
  ·TECLOCK Micro Hole Test
  ·JAN Code: 4560120873244
  ·Trusco Code: 816-7835
  ・ Weight: 100 g
  [Set Contents / Accessories]
  ·probe: 4 pcs.

  Standard Price:	18,699,156 IDR
  Days to Ship:	10 Day(s) or more

• 

  Horizontal Standing External Diameter Measuring Instrument

  CITIZENSEIMITSU

  [Features]
  · MEI-1: Outer diameter measuring instrument that enables absolute measurements
  · H-2B: Outer diameter measuring instrument that enables high precision comparative measurement
  · H-2LB: Supports components up to 45 mm

  Standard Price:	24,531,375 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Dial Bore Gage

  MAHR

  Standard Price:	23,945,693 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Digimatic Hole Test (Three-point Type Internal Micrometer)

  MITUTOYO

  Standard Price:	21,240,000 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Hole Test (Two-point Type Internal Micrometer)

  MITUTOYO

  Standard Price:	25,618,924 IDR-
  Days to Ship:	Quote

Loading...