Dial Gauges（Maximum Measurement Length (Range Selection)：0–1）

• 

  Dial Indicator Measurement Range 0 to 0.2 mm Probe Ruby

  NIIGATA SEIKI (SK)

  Abrasion-resistant non-conductive dial indicator.
  [Features]
  · Measurements can be taken easily in places that cannot be measured using a dial gauge, such as in narrow or deep spaces.
  · A jewel has been assembled to each bearing for excellent precision and durability.
  · A ruby ball is used in the gauge head to provide excellent abrasion resistance. It does not conduct electricity and does not become magnetically charged.
  · The main unit is made of steel.
  [Applications]
  · Used to measure inner/outer sides, groove width, centering, parallelism, flatness, etc.

  Standard Price:	2,306,358 IDR
  Days to Ship:	Quote

• 

  Standard Shaped Dial Gauge (Scale Interval: 0.01 mm)

  OZAKI MFG (PEACOCK)

  [Features]
  · The most widely used dial gauge with scale intervals of 0.01 mm. Select from a wide range of devices to suit the application.
  · With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.
  · By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.
  · Gears are protected from sudden upward pressure from the spindle by the shock proofing mechanism.
  · Limit stickers are included as standard with all models.

  Standard Price:	925,119 IDR
  Days to Ship:	10 Day(s) or more

• 

  Pointer Less Than One Rotation Dial Gauge

  OZAKI MFG (PEACOCK)

  [Features]
  · Dial gauge with scale intervals of 0.01 mm/0.001 mm and a pointer with less than one full rotation.
  · The rotation of the pointer is kept to less than 1 turn in order to prevent misreading.
  · Choose from an abundance of device models for the dedicated relative measurement dial

  Standard Price:	924,357 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Dial Gauge, Pictest (Switch Lever Type, PC Series)

  OZAKI MFG (PEACOCK)

  [Features]
  · Lever-type dial gauge with switch lever.
  · Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.
  · With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.
  · The gauge damage prevention probe is provided on all models.
  · By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.

  Standard Price:	1,627,438 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Non-Magnetic/Non-Energization New Pic-Test (U Series)

  OZAKI MFG (PEACOCK)

  [Features]
  · Gauge heads and pointers are non-magnetic, so they are not affected by magnetic environments.
  · The use of ceramic stems achieves non-conductivity, allowing use in electric discharge machines, etc.
  · Easy to read light blue scale.
  · Select from 0.01 mm, 0.002 mm, or 0.001 mm types.
  · The gauge damage prevention probe is provided on all models.
  · By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.
  · Improved abrasion resistance with a probe with a ruby ball.

  Standard Price:	2,207,938 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Standard Shaped Dial Gauge (Scale Interval: 0.001 mm)

  OZAKI MFG (PEACOCK)

  The most widely used dial gauge with scale intervals of 0.001/0.005 mm. Select from a wide range of devices to suit the application.
  
  [Features]
  · With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.
  · By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.
  · Gears are protected from sudden upward pressure from the spindle by the shock proofing mechanism.
  · Limit stickers are included as standard with all models.

  Standard Price:	1,776,944 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Dial Gauge, Dial Thickness Gauge (0.001 mm Type)

  OZAKI MFG (PEACOCK)

  [Features]
  · Thickness gauge with scale intervals of 0.001 mm.
  · Ideal for measuring the thickness of precise small objects, films, special fabrics, etc.
  · Available with two measurement ranges, 0 to 1 mm or 0 to 5 mm

  Standard Price:	2,991,171 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Dial Gauge, New Pic-test (No Clutch Type, PCN Type)

  OZAKI MFG (PEACOCK)

  [Features]
  · No-latch type with a lever-type dial gauge lacking the most general switching lever.
  · The pointer continually rotates clockwise in accordance with the upward and downward movement of the gauge head, improving measurement efficiency for a wide range of applications.
  · Select from 0.01 mm, 0.002 mm, or 0.001 mm types.
  · Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.
  · With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.

  Standard Price:	1,906,458 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Pic-Test New Pic-Test PC/PCN

  OZAKI MFG (PEACOCK)

  Improved abrasion resistance with a probe with a ruby ball.

  Standard Price:	1,728,354 IDR-
  Days to Ship:	10 Day(s) or more

• • On Sale Till 31/03/2026

  

  Lever Type Dial Gauge

  MAHR

  [Features]
  · Fixing bracket (shank) removable structure allows the position to be freely changed.
  · Wear-resistant artificial gems are used for the entire internal shaft.
  · There are 2 mounting shafts, 6 mm and 8 mm, which can be removed.
  · Vibration-proof structure.
  · A structure in which the pointer's cover glass can be removed, eliminating time spent repairing any damage to the glass.
  · Fixing bracket (shank) removable structure enables work that originally required multiple units to be done with a single unit, making it highly economical.
  [Applications]
  · General molding industry.
  · Research and development work.

  Standard Price:	2,128,554 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  Compact Dial Gauge (Measurement Range 1 to 5 mm)

  OZAKI MFG (PEACOCK)

  Compact dial gauge with small surface diameter. Does not take up space for multipoint measurement or mounting to a jig, etc.

  Standard Price:	3,879,551 IDR
  Days to Ship:	10 Day(s) or more

• 

  Lever Test (Lever Swap Type)

  TECLOCK

  Lever Test
  Features]
  Since the probe and pointer are nonmagnetic, they are not affected by magnetism.
  The probe can be set at an angle of 200° arc.
  [Specifications]
  Maximum Measurement Length (Range Selection):0-1mm
  Scale type:Balanced Scale
  Mounting shaft diameter:6mm
  Measured force:0.4N or less
  [Application]
  For various measurements such as outside, inside, inside the groove, centering.

  Standard Price:	2,107,693 IDR-
  Days to Ship:	1 Day(s)

• 

  New Pic Test for Low Pressure (E Series)

  OZAKI MFG (PEACOCK)

  [Features]
  · Lever-type dial gauge with super low pressure measuring force (0.05 N / 0.1 N).
  · No-clutch type (PCN) and switching lever type (PC) are available as a selection of 0.01 mm or 0.002 mm options.
  · Uses a green scale plate that is easy on the eyes.
  · Highly sensitive, enabling measurement at low measurement power.
  · The gauge damage prevention probe is provided on all models.
  · By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.
  · Try it out if you are having trouble with errors due to the effects of measuring force

  Standard Price:	2,034,563 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Surface Dial, New Peak Test (D Series)

  OZAKI MFG (PEACOCK)

  [Features]
  · The display is enlarged by approximately 30% for better visibility.
  · The long stem (screw-in type) has been standardized.
  · Select from 0.01 mm, 0.002 mm, or 0.001 mm types.
  · The gauge damage prevention probe is provided on all models.
  · D type in which the display can be seen clearly even from a distance.
  · Surface diameter φ46.5.
  · Easy to read the minimum display.

  Standard Price:	1,970,823 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Dial Gauge, Dial comparator (Point Measuring Instrument)

  MAHR

  [Features]
  ·Innovative scale panel design.
  ·In order to improve repeatability and durability, rubies are used for all internal friction parts.
  ·The measuring spindle uses a patented special bearing.
  ·The shock prevention mechanism automatically disconnects the mechanism when the measurement range is exceeded to prevent failure.
  ·A long-selling product that was developed and sold 70 years ago.
  ·Large, high-contrast dial.
  ·Adjustable Tolerance Marker.
  ·Lock type fine adjustment screw.
  ·Both the mounting shank and measuring spindle are made of hardened stainless steel.
  ·Insensitive to lateral forces (lateral play) acting as a measuring spindle.
  ·Maximum sensitivity and accuracy are ensured only by excellent travel performance and the use of precision gears and pinions.
  ·The measuring spindle can be retracted with either a cable release screw or a lift knob.
  [Applications]
  ·1µm, 0.5µm precision measurement.
  ·Precision machined product manufacturing field.
  ·Precision equipment manufacturing and automobile parts manufacturing fields.

  Standard Price:	7,165,471 IDR-
  Days to Ship:	1 Day(s)

• 

  Lever Test (Auto Clutch)

  TECLOCK

  [Features]
  · It has improved sensitivity for dimensional displacement compared to a dial gauge.
  · The probe and indicator are made from non-magnetic materials, so they are not influenced by the magnetic force.
  · Using an auto-clutch mechanism without a switching lever, the measuring direction is switched automatically between forward and reverse.
  · The probe can be set to an arc angle of 220°.
  [Applications]
  · For measuring the exterior, interior, grooves and finding the center.

  Standard Price:	1,999,077 IDR-
  Days to Ship:	1 Day(s)

• 

  New Pic-Test (without Stem, V-Series)

  OZAKI MFG (PEACOCK)

  Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.

  Standard Price:	1,900,021 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Pictest (Double Sided Type, W Series)

  OZAKI MFG (PEACOCK)

  A double-sided lever type dial gauge that is very useful for work piece centering measurement. It is provided with a gauge damage prevention measurement probe. By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.

  Standard Price:	3,219,921 IDR
  Days to Ship:	10 Day(s) or more

• 

  Pictest (without Stem, V Series)

  OZAKI MFG (PEACOCK)

  Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.

  Standard Price:	1,621,001 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Pic Test for Low Pressure (E Series)

  OZAKI MFG (PEACOCK)

  [Features]
  · Lever-type dial gauge with super low pressure measuring force (0.05 N / 0.1 N).
  · No-clutch type (PCN) and switching lever type (PC) are available as a selection of 0.01 mm or 0.002 mm options.
  · Uses a green scale plate that is easy on the eyes.
  · Highly sensitive, enabling measurement at low measurement power.
  · The gauge damage prevention probe is provided on all models.
  · By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.
  · Try it out if you are having trouble with errors due to the effects of measuring force

  Standard Price:	1,672,845 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Pointer Less than One Rotation New Pick Test (Z Series)

  OZAKI MFG (PEACOCK)

  [Features]
  · Miniature bearings are used in the fulcrum portion of the gauge heads to realize excellent durability and sensitivity.
  · Bearing jewel used in all bearings provides outstanding indicating sensitivity.
  · An O-ring is used for the rotating part of the external frame, providing reinforced oil resistance.
  · It has a measurement probe and a groove to prevent gauge damage, so even if force is applied in a horizontal direction, the probe will break at the grooved point, and the gauge body is protected.
  · Because it is a no-clutch type, an auto-reverse rotation operating method is adopted so that the indicating needle always rotates clockwise, whether movement is forward or backward.
  · By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.

  Standard Price:	1,613,371 IDR-
  Days to Ship:	10 Day(s) or more

Loading...