Micrometers（Maximum Measurement Length (Range Selection)：26 to 50）

• 

  Standard Outer Micrometer MC105/106

  NIIGATA SEIKI (SK)

  Long-life standard outside micrometer, with carbide tipped measurement surface that is resistant to wear.
  [Features]
  · High performance, high cost performance model.
  · Measurement surface has a carbide tip that does not cause wear.
  · Equipped with constant pressure device.
  · The frame has a painted finish.
  · Includes 1 of each reference rod. (Excluding MC105-25)
  [Applications]
  · Can be used for measurement of external dimensions.

  Standard Price:	1,032,527 IDR
  Days to Ship:	8 Day(s) or more

• 

  293 Series, Coolant-proof Micrometer MDC-MX

  MITUTOYO

  [Features]
  · The frame cover and surface panel adopt a non-slip shape (convex) that takes handheld measurements into account.
  · The ratchet thimble improves operability using one hand.
  · Oil-resistant material is used for all plastic parts.
  · With outer measuring surface carbide tip

  • STOCK

  Standard Price:	3,834,462 IDR
  Days to Ship:	1 Day(s)

• 

  Digimatic Point Micrometer, Tip Angle: 30°

  MITUTOYO

  [Features]
  · Pointed tips to allow measurement of grooves.
  · Conforms to CE standards.
  [Applications]
  · Used to measure groove diameters, such as the web diameter of drills.

  • STOCK

  Standard Price:	9,272,308 IDR
  Days to Ship:	1 Day(s)

• 

  Outside Micrometer (With Calibration Results / Calibration Certificate / Traceability System Image)

  NIIGATA SEIKI (SK)

  Standard type micrometer.
  
  [Features]
  · Measurement surface has a carbide tip.
  · With low-pressure device.
  · The frame has a painted finish.
  · Includes 1 of each reference rod (excluding MC105-25)

  Standard Price:	1,997,095 IDR
  Days to Ship:	17 Day(s) or more

• 

  Digital Exterior Micrometer (IP65 Equivalent)

  NIIGATA SEIKI (SK)

  Waterproof protection degree IP65 specification micrometer ideal for work sites exposed to water and cutting fluid.
  [Features]
  · Water- and dustproof digital micrometer with an IP65 waterproof rating.
  · Ideal for use in workplaces where cooling fluid, cutting fluid, or lubricant are used.
  · Measurement surface has carbide tip.
  · Equipped with constant pressure device.
  · Equipped with auto display off function (after about 6 minutes).
  · Material: frame: spheroidal graphite cast iron, spindle: high carbon chromium bearing steel.
  [Applications]
  · Used for measurement of external dimensions.

  Standard Price:	2,262,667 IDR
  Days to Ship:	13 Day(s) or more

• 

  Digimatic Caliper Type Inside Micrometer

  MITUTOYO

  [Features]
  · Allows easy, accurate measurement of various internal diameters.
  · Conforms to CE standards.
  [Applications]
  · For measuring inside dimensions.

  • STOCK

  Standard Price:	12,203,077 IDR-
  Days to Ship:	1 Day(s)

• 

  Digimatic Tooth Thickness Micrometer

  MITUTOYO

  [Features]
  · The gear pitch measurable range is from 0.5 to 6 modules.
  · Conforms to CE standards.
  [Applications]
  · Measuring the "root tangent length" of spur gears and helical gears.

  • STOCK

  Standard Price:	11,042,308 IDR
  Days to Ship:	1 Day(s)

• 

  Straight-Line Type Tooth Thickness Micrometer

  NIIGATA SEIKI (SK)

  A micrometer ideal for measuring the "straddling" tooth thickness of various gear teeth.
  [Features]
  · Equipped with constant pressure device.
  · With heatproof cover.
  · The frame has a painted finish.
  [Applications]
  · Can be used for measuring "straddling tooth thickness" of spur and helical gears.

  Standard Price:	3,802,680 IDR
  Days to Ship:	9 Day(s) or more

• 

  331/111/131 series Spline Micrometer

  MITUTOYO

  [Features]
  · Both measuring surfaces are thin for convenient measurement of the groove diameter of spline shafts, etc.
  · The measuring surface is equipped with a carbide tip.
  · Equipped with a constant pressure device.

  • STOCK

  Standard Price:	4,037,539 IDR
  Days to Ship:	1 Day(s)

• 

  Digital Linear Blade Micrometer

  NIIGATA SEIKI (SK)

  Micrometer with blade-type gauge head, usable for simple measurement of the narrow groove diameter of round objects.
  [Features]
  · The digital display is easy to see.
  · Equipped with constant pressure device.
  · With heatproof cover.
  · Equipped with auto display off function. (Approximately 5 minutes)
  · The frame has a painted finish.
  · Includes 1 reference rod (MCD235-50BA, MCD235-50BAU).
  [Applications]
  · Thin gauge head is perfect for measuring narrow grooves.

  Standard Price:	4,932,000 IDR
  Days to Ship:	13 Day(s) or more

• 

  Digital Linear Gear Thickness Micrometer

  NIIGATA SEIKI (SK)

  A micrometer ideal for measuring the "straddling" tooth thickness of various gear teeth.
  [Features]
  · The digital display is easy to see.
  · Equipped with constant pressure device.
  · With heatproof cover.
  · Equipped with auto display off function. (Approximately 5 minutes)
  · The frame has a painted finish.
  · Includes 1 reference rod. (MCD230-50D)
  [Applications]
  · Used for measuring "straddling tooth thickness" of spur and helical gears.

  Standard Price:	4,103,670 IDR
  Days to Ship:	9 Day(s) or more

• 

  102 Series Standard Outside Micrometer

  MITUTOYO

  Adopts a ratchet thimble structure to ensure variation-free results and stable measurement, even for users unfamiliar with one-handed operation. Ratchet operation is possible for both the thimble part and spindle part. Measurement surface has a carbide alloy tip.

  • STOCK

  Standard Price:	2,332,462 IDR-
  Days to Ship:	1 Day(s)

• 

  Count Micrometer

  NIIGATA SEIKI (SK)

  A micrometer with error-proof readings thanks to a mechanical counter display.
  [Features]
  · Can be used for measuring external dimensions and includes a carbide tip on the measurement surface.
  · Equipped with constant pressure device.
  · The frame has a painted finish.
  · MC122-50C with reference rod.
  [Applications]
  · Measurement of small item parts, etc.

  Standard Price:	1,525,786 IDR
  Days to Ship:	9 Day(s) or more

• 

  Coolant Proof Micrometer

  MITUTOYO

  [Features]
  · Oil-resistant material is used for all plastic components.
  · With origin point-setting function, hold function and zero-setting function.
  · Conforms to CE standards.
  [Applications]
  · For measurements in areas in and around water, etc.

  • STOCK

  Standard Price:	3,754,308 IDR
  Days to Ship:	1 Day(s)

• 

  Straight-Line Type Blade Micrometer

  NIIGATA SEIKI (SK)

  Micrometer with blade-type gauge head, usable for simple measurement of the narrow groove diameter of round objects.
  [Features]
  · Equipped with constant pressure device.
  · With heatproof cover.
  · The frame has a painted finish.
  [Applications]
  · Blade type measurement surface, enabling simple measurement of the diameter of narrow grooves in round objects.

  Standard Price:	2,744,699 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Hub Micrometer

  NIIGATA SEIKI (SK)

  This micrometer is ideal for measuring gear hub diameter and other areas too narrow to be measured by a standard micrometer.
  [Features]
  · Equipped with constant pressure device.
  · The frame has a painted finish.
  · Measurement surface has a carbide tip.
  · Includes 1 reference rod. (MC203-50H)
  [Applications]
  · Used for measurement of narrow areas such as gear hubs, pipe interior step thickness, etc.

  Standard Price:	2,542,799 IDR
  Days to Ship:	9 Day(s) or more

• 

  Digimatic Non-rotating Spindle Micrometer, Blade Thickness: 0.75 mm

  MITUTOYO

  [Features]
  · The measuring faces are blade types which enable the easy measuring of diameters of thin grooves in rounded objects etc.
  · Conforms to CE standards.
  [Applications]
  · Measuring the diameter of thin grooves in rounded objects.

  • STOCK

  Standard Price:	12,123,077 IDR
  Days to Ship:	1 Day(s)

• 

  343/143 Series, Caliper-type Outside Micrometer OMP-MX/OMP

  MITUTOYO

  [Features]
  · A caliper type that can measure small parts inaccessible to standard micrometer styli.
  · The measuring surface is equipped with a carbide tip. Equipped with a constant pressure device.

  • STOCK

  Standard Price:	6,183,847 IDR
  Days to Ship:	1 Day(s)

• 

  323/123/223 Series Gear Thickness Micrometer

  MITUTOYO

  Measures the "step gear thickness" of spur gears and helical gears.
  With constant pressure device
  With reference bar for base point adjustment (Excluding measuring range 0 to 25 mm)

  • STOCK

  Standard Price:	6,641,538 IDR
  Days to Ship:	1 Day(s)

• 

  Digimatic Micrometer Head, 164 350 Series

  MITUTOYO

  It comes with a digital display / output. Equipped with a measurement data output terminal, which can be used to configure a statistical process control system or measurement system.

  Standard Price:	20,536,923 IDR
  Days to Ship:	8 Day(s) or more

• 

  Caliper Micro Stand NMS-1G

  NIIGATA SEIKI (SK)

  Measurement tool/measurement device to which not only a micrometer but calipers can be attached.
  [Features]
  · Stable, medium-weight stand with a low center of gravity.
  · With non-slip rubber feet.
  · Holder for outside micrometers/Vernier calipers.
  · Can be held at angles ranging from vertical position to 45°.
  [Applications]
  · Can be used as a holder for outside micrometers up to 100 mm and Vernier calipers up to 200 mm.

  Standard Price:	1,031,788 IDR
  Days to Ship:	11 Day(s) or more

• 

  Digimatic Non-Rotating Spindle Micrometer

  MITUTOYO

  [Features]
  · The non-rotating spindle means that no rotational stress will be applied to the measured object.
  · Conforms to CE standards.
  [Applications]
  · For accurate measurement of outer diameters.

  • STOCK

  Standard Price:	12,438,462 IDR
  Days to Ship:	Quote

• 

  Digimatic Spherical Face Micrometer

  MITUTOYO

  [Features]
  · Suitable for cylindrical component measurements such as hollow tube thickness.
  · Conforms to CE standards.
  [Applications]
  · For measuring the thickness of curved surfaces and hollow tubes.

  • STOCK

  Standard Price:	7,593,846 IDR
  Days to Ship:	1 Day(s)

• 

  342/112/142 Series Point Micrometer

  MITUTOYO

  It is used for measuring trough diameters like drill wave diameters. The standard tip SR of the gauge head is 0.3 mm. Equipped with constant pressure device.

  • STOCK

  Standard Price:	5,853,846 IDR
  Days to Ship:	1 Day(s)

• 

  Micrometer

  SHINWASOKUTEI

  Finish with a strong plated coating that is resistant to rust and peeling. Moves smoothly over the entire operating range. Speedy and stable adjustment of scale origin.
  
  [Features]
  · Finish with a strong plated coating that is resistant to rust and peeling.
  · Sharp scale is easy to read.
  · Speedy and stable adjustment of scale origin.

  Standard Price:	858,344 IDR
  Days to Ship:	8 Day(s) or more

• 

  193 Series, Count External Micrometer M800

  MITUTOYO

  • STOCK

  Standard Price:	2,907,847 IDR-
  Days to Ship:	1 Day(s)

• 

  395/115/295 Series One Spherical Face Micrometer

  MITUTOYO

  Measuring surface with cemented carbide tip (BMS-15 has a cemented carbide tip only on the spindle measuring surface)
  With constant pressure device

  • STOCK

  Standard Price:	3,529,231 IDR
  Days to Ship:	1 Day(s)

• 

  Both Spherical Face Micrometer, 395/115/295 Series

  MITUTOYO

  Measurement surface has a carbide alloy tip (BMD-15 has a carbide alloy tip on the spindle measurement surface only). Equipped with constant pressure device.

  • STOCK

  Standard Price:	3,752,308 IDR
  Days to Ship:	1 Day(s)

Loading...