Micrometers

• 

  Standard Outer Micrometer MC105/106

  NIIGATA SEIKI (SK)

  Long-life standard outside micrometer, with carbide tipped measurement surface that is resistant to wear.
  [Features]
  · High performance, high cost performance model.
  · Measurement surface has a carbide tip that does not cause wear.
  · Equipped with constant pressure device.
  · The frame has a painted finish.
  · Includes 1 of each reference rod. (Excluding MC105-25)
  [Applications]
  · Can be used for measurement of external dimensions.

  Standard Price:	765,197 IDR-
  Days to Ship:	1 Day(s) or more

• 

  293 Series, Coolant-proof Micrometer MDC-MX

  MITUTOYO

  [Features]
  · The frame cover and surface panel adopt a non-slip shape (convex) that takes handheld measurements into account.
  · The ratchet thimble improves operability using one hand.
  · Oil-resistant material is used for all plastic parts.
  · With outer measuring surface carbide tip

  • STOCK

  Standard Price:	3,357,846 IDR-
  Days to Ship:	1 Day(s)

• 

  Micrometer Head (Standard Shape) MHN, 150 Series

  MITUTOYO

  It comes with a measurement data output terminal, allowing the configuration of statistical process management systems and measurement systems.
  Waterproof Digimatic micrometer head with protection rating IP65.
  [Features]
  ·A general purpose type with measurement range of 25 mm.

  • STOCK

  Standard Price:	1,701,077 IDR
  Days to Ship:	1 Day(s)

• 

  Micrometer Head, Measurement Range 0–25 mm

  NIIGATA SEIKI (SK)

  Micrometer head that cannot be used individually, but can be used as a feeder or stopper when combined with other measuring instruments.
  [Features]
  · Standard type with measurement range of 0 to 25 mm.
  · General purpose series.
  · Measurement surface has a carbide tip that is resistant to wear.
  [Applications]
  · Attached to precision instruments and precision machinery and used for measurement, feeding, positioning, etc.

  Standard Price:	539,084 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Micrometer Head, Measurement Range 0–6.5 mm

  NIIGATA SEIKI (SK)

  Micrometer head that cannot be used individually, but can be used as a feeder or stopper when combined with other measuring instruments.
  [Features]
  · Standard type with measurement range of 0 to 6.5 mm.
  · A small and lightweight series.
  · Material: Thimble, etc.: Alloy tool steel, Spindle: High carbon chromium bearing steel.
  [Applications]
  · Attached to precision instruments and precision machinery and used for measurement, feeding, positioning, etc.

  Standard Price:	607,127 IDR-
  Days to Ship:	8 Day(s) or more

• 

  323/123/223 Series Gear Thickness Micrometer

  MITUTOYO

  Measures the "step gear thickness" of spur gears and helical gears.
  With constant pressure device
  With reference bar for base point adjustment (Excluding measuring range 0 to 25 mm)

  • STOCK

  Standard Price:	5,836,923 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Straight-Line Type Tooth Thickness Micrometer

  NIIGATA SEIKI (SK)

  A micrometer ideal for measuring the "straddling" tooth thickness of various gear teeth.
  [Features]
  · Equipped with constant pressure device.
  · With heatproof cover.
  · The frame has a painted finish.
  [Applications]
  · Can be used for measuring "straddling tooth thickness" of spur and helical gears.

  Standard Price:	3,802,680 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Digital Linear Blade Micrometer

  NIIGATA SEIKI (SK)

  Micrometer with blade-type gauge head, usable for simple measurement of the narrow groove diameter of round objects.
  [Features]
  · The digital display is easy to see.
  · Equipped with constant pressure device.
  · With heatproof cover.
  · Equipped with auto display off function. (Approximately 5 minutes)
  · The frame has a painted finish.
  · Includes 1 reference rod (MCD235-50BA, MCD235-50BAU).
  [Applications]
  · Thin gauge head is perfect for measuring narrow grooves.

  Standard Price:	4,932,000 IDR
  Days to Ship:	13 Day(s) or more

• 

  Outside Micrometer, Adjustable Anvil Type

  NIIGATA SEIKI (SK)

  A micrometer with a wide measurement range and an anvil mounting position that can be changed with the included adjustment anvil.
  [Features]
  · Adopts a pipe frame for lighter weight.
  · Equipped with constant pressure device.
  · The frame has a painted finish.
  · Measurement surface has a carbide tip.
  [Applications]
  · The measurement range of the outer dimension can be widened by changing the adjustment anvil.

  Standard Price:	9,540,871 IDR-
  Days to Ship:	8 Day(s) or more

• 

  523 Series, Snap Meter PSM-R

  MITUTOYO

  Ideal for measuring mass-produced parts. Design assumes measurement while mounted to a stand, to achieve stable measurement. It achieves high precision with instruction error of 1 μm and scale interval of 1 μm. Equipped with a slide type workpiece stopper optimum for measuring objects with poor stability.

  Standard Price:	21,106,154 IDR
  Days to Ship:	11 Day(s) or more

• 

  Digimatic Micrometer Head, 164 350 Series

  MITUTOYO

  It comes with a digital display / output. Equipped with a measurement data output terminal, which can be used to configure a statistical process control system or measurement system.

  Standard Price:	20,536,923 IDR
  Days to Ship:	8 Day(s) or more

• 

  148 Series Micrometer Head (Standard Shape) MHA

  MITUTOYO

  [Features]
  · Small general purpose type with measurement range of 13 mm.
  · The reference point can be easily adjusted with a thimble.

  • STOCK

  Standard Price:	2,075,385 IDR-
  Days to Ship:	1 Day(s)

• 

  Outside Micrometer (With Calibration Results / Calibration Certificate / Traceability System Image)

  NIIGATA SEIKI (SK)

  Standard type micrometer.
  
  [Features]
  · Measurement surface has a carbide tip.
  · With low-pressure device.
  · The frame has a painted finish.
  · Includes 1 of each reference rod (excluding MC105-25)

  Standard Price:	1,577,388 IDR-
  Days to Ship:	17 Day(s) or more

• 

  Digimatic Point Micrometer, Tip Angle: 30°

  MITUTOYO

  [Features]
  · Pointed tips to allow measurement of grooves.
  · Conforms to CE standards.
  [Applications]
  · Used to measure groove diameters, such as the web diameter of drills.

  • STOCK

  Standard Price:	8,154,923 IDR-
  Days to Ship:	1 Day(s)

• 

  Digimatic Micrometer Head

  MITUTOYO

  [Features]
  · Easy-to-read digital display.
  · Conforms to CE standards.
  [Applications]
  · For positioning, for mounting to measuring devices and precision instruments, etc.

  • STOCK

  Standard Price:	5,457,714 IDR-
  Days to Ship:	1 Day(s)

• 

  Digital Exterior Micrometer

  NIIGATA SEIKI (SK)

  A micrometer with an easy-to-see digital display.
  [Features]
  · Measurement surface has a carbide tip.
  · Equipped with constant pressure device.
  · Equipped with auto display off function. (Approximately 6 minutes)
  · With heatproof cover. (Excluding MCD130-125 and MCD130-150)
  · The frame has a painted finish.
  · With spherical attachment. (SR2.5)
  · Includes 1 reference rod. (Excluding MCD130-25)
  [Applications]
  · Used for measurement of external dimensions.

  Standard Price:	1,971,000 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Digital Linear Gear Thickness Micrometer

  NIIGATA SEIKI (SK)

  A micrometer ideal for measuring the "straddling" tooth thickness of various gear teeth.
  [Features]
  · The digital display is easy to see.
  · Equipped with constant pressure device.
  · With heatproof cover.
  · Equipped with auto display off function. (Approximately 5 minutes)
  · The frame has a painted finish.
  · Includes 1 reference rod. (MCD230-50D)
  [Applications]
  · Used for measuring "straddling tooth thickness" of spur and helical gears.

  Standard Price:	4,103,670 IDR
  Days to Ship:	9 Day(s) or more

• 

  Outer Micrometer, Replaceable Anvil Type

  NIIGATA SEIKI (SK)

  Replacing the anvil enables 1 micrometer to be used for a wide range of measurement work.
  [Features]
  · With only a single unit, the measurement range can be widened by exchanging the anvil.
  · With constant pressure device and carbide tip on measurement surface.
  · The frame has a painted finish.
  [Applications]
  · For extensive measurement.

  Standard Price:	3,806,492 IDR
  Days to Ship:	9 Day(s) or more

• 

  102 Series Standard Outside Micrometer

  MITUTOYO

  Adopts a ratchet thimble structure to ensure variation-free results and stable measurement, even for users unfamiliar with one-handed operation. Ratchet operation is possible for both the thimble part and spindle part. Measurement surface has a carbide alloy tip.

  • STOCK

  Standard Price:	2,176,462 IDR-
  Days to Ship:	1 Day(s)

• 

  193 Series, Count External Micrometer M800

  MITUTOYO

  • STOCK

  Standard Price:	3,450,308 IDR-
  Days to Ship:	1 Day(s)

• 

  Outside Micrometer, Replacement Anvil Type, 340/104 Series

  MITUTOYO

  By replacing the anvil, it is possible to widen the measurement range while using a single main body. The standard product comes with a carbide tip on the spindle side only. Equipped with a low-pressure device.

  • STOCK

  Standard Price:	6,541,692 IDR-
  Days to Ship:	1 Day(s) or more

• 

  331/111/131 series Spline Micrometer

  MITUTOYO

  [Features]
  · Both measuring surfaces are thin for convenient measurement of the groove diameter of spline shafts, etc.
  · The measuring surface is equipped with a carbide tip.
  · Equipped with a constant pressure device.

  • STOCK

  Standard Price:	5,054,769 IDR-
  Days to Ship:	1 Day(s)

• 

  510 Series, Indicating Micrometer IDM-R

  MITUTOYO

  Ideal for the measurement of low-volume multi-model production parts. Design assumes measurement while held in the hand, to achieve stable measurement. It achieves high precision with instruction error of 1 μm and scale interval of 1 μm. Equipped with zero adjustment function. Measurement surface has a carbide alloy tip.

  • STOCK

  Standard Price:	19,961,538 IDR-
  Days to Ship:	1 Day(s) or more

• 

  148 Series, Micrometer Head (High-Functioning Type) MHS/MHC/MHT

  MITUTOYO

  The high accuracy threading technology with spindle pitch of 0.1 mm enables fine feed of 1/5 as opposed to the conventional 0.5 mm pitch. The external shape is compatible with the conventional standard type (0.5 mm pitch), allowing it to be easily replaced.

  • STOCK

  Standard Price:	2,440,000 IDR
  Days to Ship:	1 Day(s)

• 

  Micrometer Stand MS-RG/MS-SG

  NIIGATA SEIKI (SK)

  Micrometer stand which enables you to hold measurement targets in your hand.
  [Features]
  · Stable, medium-weight stand with a low center of gravity.
  · With non-slip rubber feet.
  · Can be held at angles ranging from vertical position to 45°.
  · Mounting size: Outside micrometer up to 100 mm.
  [Applications]
  · Holder for outside micrometers, etc.

  Standard Price:	720,495 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Caliper Micro Stand NMS-1G

  NIIGATA SEIKI (SK)

  Measurement tool/measurement device to which not only a micrometer but calipers can be attached.
  [Features]
  · Stable, medium-weight stand with a low center of gravity.
  · With non-slip rubber feet.
  · Holder for outside micrometers/Vernier calipers.
  · Can be held at angles ranging from vertical position to 45°.
  [Applications]
  · Can be used as a holder for outside micrometers up to 100 mm and Vernier calipers up to 200 mm.

  Standard Price:	1,031,788 IDR
  Days to Ship:	11 Day(s) or more

• 

  Micrometer with Dial Gauge

  NIIGATA SEIKI (SK)

  Micrometer to be mounted to micrometer stands, etc., useful for measuring objects such as small items and screening inspection.
  [Features]
  · Spindle of the micrometer head is fixed (set to reference value) and values on the dial gauge are read for comparison setting.
  · Material: frame: spheroidal black steel cast iron, spindle: high carbon chromium bearing steel.
  · Equipped with constant pressure device.
  · The frame has a painted finish.
  · Measurement surface has a carbide tip.
  [Applications]
  · For screening inspection of parts.

  Standard Price:	3,271,944 IDR
  Days to Ship:	9 Day(s) or more

• 

  Micrometer Reference Rod

  NIIGATA SEIKI (SK)

  Adjustment rod essential for adjusting the reference point of outside micrometers.
  [Features]
  · Reference point adjusting rod for micrometers.
  · Main unit is made of high carbon chromium bearing steel
  · Grip: Plastic.
  [Applications]
  · Useful for adjusting reference points of outside micrometer to 25-50 or more.

  Standard Price:	231,572 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Micrometer Head, Measurement Range 0-13 mm

  NIIGATA SEIKI (SK)

  Micrometer head that can be used as a feeder or stopper when attached to other measuring instruments.
  [Features]
  · Standard small, general use series with measurement range of 0 to 13 mm.
  · The size of spindle is φ5 (diameter 5 mm) x φ17 (diameter 17 mm).
  · Stem φ9.5 (diameter 9.5 mm) x φ9.5 (diameter 9.5 mm), thimble diameter 13 mm.
  · The thimble and other parts are made of alloy tool steel, while the spindle is made of high-carbon chrome bearing steel.
  [Applications]
  · Attached to precision instruments and precision machinery and used for measurement, feeding, positioning, etc.

  Standard Price:	609,332 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Coolant Proof Micrometer

  MITUTOYO

  [Features]
  · Oil-resistant material is used for all plastic components.
  · With origin point-setting function, hold function and zero-setting function.
  · Conforms to CE standards.
  [Applications]
  · For measurements in areas in and around water, etc.

  • STOCK

  Standard Price:	5,313,692 IDR-
  Days to Ship:	1 Day(s)

• 

  Digimatic Non-Rotating Spindle Micrometer

  MITUTOYO

  [Features]
  · The non-rotating spindle means that no rotational stress will be applied to the measured object.
  · Conforms to CE standards.
  [Applications]
  · For accurate measurement of outer diameters.

  • STOCK

  Standard Price:	11,345,077 IDR-
  Days to Ship:	1 Day(s)

• 

  Digimatic Spherical Face Micrometer

  MITUTOYO

  [Features]
  · Suitable for cylindrical component measurements such as hollow tube thickness.
  · Conforms to CE standards.
  [Applications]
  · For measuring the thickness of curved surfaces and hollow tubes.

  • STOCK

  Standard Price:	6,793,846 IDR-
  Days to Ship:	1 Day(s)

• 

  Digimatic Point Micrometer, Tip Angle: 15°

  MITUTOYO

  [Features]
  · Pointed tips to allow measurement of grooves.
  · Conforms to CE standards.
  [Applications]
  · Used to measure groove diameters, such as the web diameter of drills.

  • STOCK

  Standard Price:	9,170,308 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Digimatic Non-rotating Spindle Micrometer, Blade Thickness: 0.75 mm

  MITUTOYO

  [Features]
  · The measuring faces are blade types which enable the easy measuring of diameters of thin grooves in rounded objects etc.
  · Conforms to CE standards.
  [Applications]
  · Measuring the diameter of thin grooves in rounded objects.

  • STOCK

  Standard Price:	10,852,000 IDR-
  Days to Ship:	1 Day(s)

• 

  Digimatic Tooth Thickness Micrometer

  MITUTOYO

  [Features]
  · The gear pitch measurable range is from 0.5 to 6 modules.
  · Conforms to CE standards.
  [Applications]
  · Measuring the "root tangent length" of spur gears and helical gears.

  • STOCK

  Standard Price:	10,310,769 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Outside Micrometer

  KTC(KYOTO TOOL)

  [Features]
  · Frame has a painted finish with strong rust resistance.
  · Measurement surface has a cemented carbide tip, and is strong without rattling.
  · Includes a pressure regulator.

  Standard Price:	1,402,628 IDR-
  Days to Ship:	8 Day(s)

• 

  Deep Throat Micrometer

  NIIGATA SEIKI (SK)

  Standard Price:	3,007,231 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Count Micrometer

  NIIGATA SEIKI (SK)

  A micrometer with error-proof readings thanks to a mechanical counter display.
  [Features]
  · Can be used for measuring external dimensions and includes a carbide tip on the measurement surface.
  · Equipped with constant pressure device.
  · The frame has a painted finish.
  · MC122-50C with reference rod.
  [Applications]
  · Measurement of small item parts, etc.

  Standard Price:	1,287,608 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Spline Micrometer

  NIIGATA SEIKI (SK)

  Both measuring probes are slim, making this micrometer convenient for measuring the grooves of spline shafts, etc.
  [Features]
  · Both measuring surfaces are narrow.
  · Measurement surface has a carbide tip.
  · Equipped with constant pressure device.
  · With heatproof cover.
  · The frame has a painted finish.
  [Applications]
  · Ideal for measuring grooves such as spline shafts.

  Standard Price:	1,923,683 IDR
  Days to Ship:	9 Day(s) or more

• 

  Standard Outer Micrometer Set

  NIIGATA SEIKI (SK)

  Set of 6 standard outer micrometers from 0 to 150 mm convenient for collective management.
  [Features]
  · Heat-proof specifications help prevent transfer of worker's body temperature.
  · In a dedicated wooden box for convenient storage.
  · Includes 5 reference rods. (Excluding MC105-25)
  · Measurement surface has a carbide tip.
  · Equipped with constant pressure device.
  · The frame has a painted finish.
  [Applications]
  · Can be used for measurement of external dimensions.

  Standard Price:	8,816,500 IDR
  Days to Ship:	13 Day(s) or more

• 

  U Steel Panel Micrometer

  NIIGATA SEIKI (SK)

  A micrometer convenient for measuring steel plate thickness, with a deep frame.
  [Features]
  · The frame has depth, enabling measurement of steel plate, etc., at your desired location.
  · Measurement surface has a carbide tip.
  · Equipped with constant pressure device.
  · With heatproof cover.
  · The frame has a painted finish.
  · Measurement surface shape is available in flat or half-spherical surface (MC203-300U).
  [Applications]
  · Usable for measurement of steel sheet thickness.

  Standard Price:	2,211,823 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Straight-Line Type Blade Micrometer

  NIIGATA SEIKI (SK)

  Micrometer with blade-type gauge head, usable for simple measurement of the narrow groove diameter of round objects.
  [Features]
  · Equipped with constant pressure device.
  · With heatproof cover.
  · The frame has a painted finish.
  [Applications]
  · Blade type measurement surface, enabling simple measurement of the diameter of narrow grooves in round objects.

  Standard Price:	2,505,504 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Hub Micrometer

  NIIGATA SEIKI (SK)

  This micrometer is ideal for measuring gear hub diameter and other areas too narrow to be measured by a standard micrometer.
  [Features]
  · Equipped with constant pressure device.
  · The frame has a painted finish.
  · Measurement surface has a carbide tip.
  · Includes 1 reference rod. (MC203-50H)
  [Applications]
  · Used for measurement of narrow areas such as gear hubs, pipe interior step thickness, etc.

  Standard Price:	2,456,833 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Point Micrometer

  NIIGATA SEIKI (SK)

  Micrometer that is perfect for measuring root diameters.
  [Features]
  · Acute angle gauge head is perfect for point measurement.
  · Equipped with constant pressure device. Measurement surface has a carbide tip.
  · Frame: Spheroidal graphite cast iron. Spindle: High Carbon Chromium Bearing Steel.
  · With heatproof cover.
  · The frame has a painted finish.
  [Applications]
  · It is used for measuring trough diameters like drill wave diameters.

  Standard Price:	1,822,409 IDR
  Days to Ship:	8 Day(s) or more

• 

  Micrometer Display

  NIIGATA SEIKI (SK)

  Extremely convenient micrometer for high-precision measurement inspections and screening inspections of small item parts, etc.
  [Features]
  · With heatproof plate.
  · Measurement surface has carbide tip
  · The dial indicator is provided with a limit needle.
  · Material consists of frame: spheroidal graphite cast iron, spindle: high carbon chromium bearing steel.
  [Applications]
  · Used for high-precision measurement inspections and screening inspections of small item parts, etc.

  Standard Price:	8,379,354 IDR
  Days to Ship:	8 Day(s) or more

Loading...