Vernier Calipers（Solar Panel：NA）

• 

  Vernier Caliper, 500 Series, ABS Digimatic Caliper CD-AX

  MITUTOYO

  This is the new, next-generation product, the digital vernier calipers CD-CX. Adopts electromagnetic induction type absolute encoder.
  Photograph is a representative product image.

  • Volume Discount

  • STOCK

  Standard Price:	3,041,539 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Vernier Caliper, 500 Series, IP67ABS Coolant-Proof Caliper CD-PS/PM

  MITUTOYO

  · ABS coolant-proof calipers (standard type) achieve a protection grade of IP67, which allows the device to be securely used even in environments where it could be exposed to large amounts of coolant liquid. A complete air leak test is performed to check the airtightness and guarantee quality.
  · The LCD display uses large text that is easy to read. The high-contrast LCD display decreases fatigue.
  · Easy to operate due to a simple single-switch design.
  · The LCD display turns off when not used for approximately 20 minutes, due to an automatic power ON and OFF function. The ABS automatically restores the most recent origin position. Turns on automatically if the slide is moved.
  · Absolute Scale ABS is built in, so it is not necessary to set zero each time the power is turned ON.
  · Can also be used for step measurement.
  · The battery lid does not require a screwdriver to open it, which allows batteries to be changed quickly.
  · By changing to a low current consumption IC, battery life is increased dramatically to 5 years (prior model battery life: 3 years).
  · A statistical process control system or measurement system can be configured.
  · An inspection report is included as standard. (Note that it cannot be used to acquire calibration certification.)
  

  • STOCK

  Standard Price:	3,570,924 IDR-
  Days to Ship:	1 Day(s)

• 

  Vernier Caliper, 552 Series ABS Coolant Proof Carbon Caliper CFC-G Regular Type

  MITUTOYO

  Absolute digital calipers with an IP66 protection degree. Equipped with a measurement data output terminal, which can be used to configure a statistical process control system or measurement system.

  Standard Price:	42,615,385 IDR
  Days to Ship:	30 Day(s)

• 

  534 Series, Long-Jaw, Long Vernier Calipers C-L

  MITUTOYO

  The jaws have been lengthened. Inner dimensions can be measured with the upper scale of the slider and outer dimensions with the lower scale. Internal measurement can be performed from the minimum internal measurement length.

  Standard Price:	16,463,077 IDR
  Days to Ship:	12 Day(s)

• 

  [Kanon] Flat Head Caliper PITA

  NAKAMURASEISAKU

  [Features]
  · 21st century standard calipers, Pita calipers.
  · "Flat head" enables easy measurement from any corner.
  · PITA15: The main scale grooves on the top and bottom scales reduce diffuse reflection on the surface with the scale markings.
  · Because the green color is easy on the eyes, they don't get tired.

  Standard Price:	727,493 IDR-
  Days to Ship:	8 Day(s) or more

• 

  [Kanon] Vernier Caliper, Flat Head Caliper E-PITA

  NAKAMURASEISAKU

  The flat head makes it easy to measure from any corner.
  [Features]
  ·The design has been completely redesigned! A wide variety of sizes are also available.
  ·Digital type pita calipers.
  ·The display is large and easy to read.
  
  List of vernier calipers List of standard vernier calipers List of digital vernier calipers See how to use vernier caliper

  • STOCK

  Standard Price:	2,800,616 IDR-
  Days to Ship:	1 Day(s)

• 

  Dial Caliper

  MITUTOYO

  [Features]
  · Calipers for taking readings using a rack and pinion driven expansion mechanism.
  [Applications]
  · Step measurement, outside measurement, inside measurement and depth measurement.

  • STOCK

  Standard Price:	5,624,615 IDR
  Days to Ship:	1 Day(s)

• 

  [Kanon] Vernier Caliper, Centerline Caliper E-RM-J

  NAKAMURASEISAKU

  Two measurements are possible. Multifunctional round hole pitch vernier caliper.
  [Features]
  ·Both the hole-to-hole pitch and the pitch from the end face to the hole can be "directly read with a single tool".
  ·It can be read directly by offset input.
  ·By setting the upper offset value (15.00 mm) and the lower offset value (7.50 mm), this machine displays the measured pit dimensions in actual size, eliminating the need to calculate additions and subtractions to the displayed values like conventional products. has become much easier to use.
  ·With this single vernier caliper, you can directly read the pitch from hole to hole and the pitch from the edge to the hole.
  [Applications]
  ·Sheet metal processing products and construction housing.
  ·The upper and lower offset values can be easily set by pressing the "SET" button.
  
  List of vernier calipers List of hole pitch vernier calipers List of digital vernier calipers See how to use vernier caliper

  Standard Price:	12,013,847 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Vernier Caliper, Dial Caliper (Titanium-Coated Type)

  MITUTOYO

  [Features]
  · Calipers for taking readings using a rack and pinion driven expansion mechanism.
  · Stable, shock-proof structure that further improves impact resistance.
  · The titanium coating protects against wear.
  [Applications]
  · Step measurement, outside measurement, inside measurement and depth measurement.

  • STOCK

  Standard Price:	2,560,308 IDR-
  Days to Ship:	1 Day(s)

• 

  Portable Vernier Calipers

  SHINWASOKUTEI

  Pocket calipers used for various dimensional measurements.
  [Features]
  · Small, conveniently portable calipers.
  [Applications]
  · Ideal for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  • STOCK

  Standard Price:	172,770 IDR
  Days to Ship:	1 Day(s)

• 

  [Kanon] Vernier Caliper For Inside Measurement ICM

  NAKAMURASEISAKU

  [Features]
  · Ideal for internal measurements in deep places.
  · Inside calipers with a "long-narrow jaw" ideal for inner depth measurements.
  · Long and thin jaw is ideal for internal measurements in deep holes.
  · The jaw length is available in two types, 56 mm and 76 mm

  Standard Price:	13,922,635 IDR-
  Days to Ship:	16 Day(s) or more

• 

  C Surface Vernier Caliper

  TOEIKOGYO

  [Features]
  · With scale lines calculated based on the Pythagorean theorem, C surface dimensions and welding dimensions can be measured accurately and quickly.
  · Vernier scale enables C-surface dimension measurements from 0.1 mm to 15 mm.
  [Applications]
  · Milling, Weld Beveling, Lathe Machining, Scribing
  [Material]
  · Main unit: SPHC-P, phosphate galvanizing treatment
  · Main Scale: SUS420J2, Silver Plating

  Standard Price:	953,532 IDR
  Days to Ship:	8 Day(s) or more

• 

  [Kanon] Vernier Caliper, Dial Scale Caliper DMK-J

  NAKAMURASEISAKU

  [Features]
  · Rack and pinion type caliper.
  · The improved shock resistance allows use with no concerns.
  · Pointer needle 1 revolution 1 mm.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · Used for on-site measurements of precision machining.

  Standard Price:	1,301,742 IDR-
  Days to Ship:	8 Day(s) or more

• 

  [Kanon] Centerline Caliper E-RM30DX

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring hole pitch from wall surfaces.
  · A multifunction, direct reading type, digital round hole pitch caliper, with which "3 measurements" can be enabled by replacing the gauge head.

  Standard Price:	13,473,683 IDR
  Days to Ship:	10 Day(s) or more

• 

  [Kanon] Vernier Caliper, Long Jaw Caliper E-LSM

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring diameters for spheres, pipes, etc.
  · Long jaw calipers with "long length jaw" ideal for measuring large diameter pipes, etc.
  · Outer jaw length is 1/2 or more of the measurement length, ideal for diameter measurement of spheres, pipes, etc.
  · Printer output function included

  • STOCK

  Standard Price:	28,955,655 IDR
  Days to Ship:	10 Day(s) or more

• 

  Vernier Caliper

  SHINWASOKUTEI

  Standard calipers.
  [Features]
  · Standard type and easy to use.
  [Applications]
  · Ideal for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  Standard Price:	446,692 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Mini Vernier Calipers, High Grade

  SHINWASOKUTEI

  High-class, high-precision mini calipers that can be used for measuring various dimensions, small as they are.
  [Features]
  · Small, conveniently portable calipers.
  [Applications]
  · Ideal for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  • STOCK

  Standard Price:	466,000 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Vernier Caliper, Digital Calipers SDV-100/SDV-150

  SK 11

  Digital type allows easy measurement of outer diameter, inner diameter, level difference and depth, etc.
  [Features]
  · Measurement values are instantly displayed on the digital display.
  · With zero setting function to enable relative measurements and indirect measurements.
  · With a hold function that can set and hold a read value.
  [Applications]
  · Measuring outer diameter, inner diameter, level difference and depth, etc.

  Standard Price:	529,000 IDR-
  Days to Ship:	8 Day(s) or more

• 

  [Kanon] Large Caliper EMA

  NAKAMURASEISAKU

  [Features]
  · A standard long digital vernier caliper.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For measuring turned workpieces.

  Standard Price:	10,496,719 IDR-
  Days to Ship:	1 Day(s) or more

• 

  [Kanon] Standard Calipers M

  NAKAMURASEISAKU

  Standard vernier calipers for regular measurements

  Standard Price:	8,165,197 IDR-
  Days to Ship:	10 Day(s) or more

• 

  [Kanon] Vernier Caliper, Long Jaw Caliper LSM

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring diameters for spheres, pipes, etc.
  · Ideal for diameter measurement of large bore pipes, etc.

  Standard Price:	9,024,870 IDR-
  Days to Ship:	1 Day(s) or more

• 

  [Kanon] Vernier Caliper SCM

  NAKAMURASEISAKU

  [Features]
  · Reads the inside and outside measurement with high precision.
  · "Fine feed" provides high accuracy.
  · Vernier calibers that come in a vast variety of sizes.
  · The jaw tip is thin, enabling measurement of narrow sections that can be read with high precision

  Standard Price:	5,609,274 IDR-
  Days to Ship:	10 Day(s) or more

• 

  [Kanon] Vernier Caliper SCML

  NAKAMURASEISAKU

  [Features]
  · Reads the inside and outside measurement with high precision.
  · "Fine feed" provides high accuracy.
  · Vernier calibers that come in a vast variety of sizes.
  · Long jaw-type SCM

  Standard Price:	8,736,615 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Digital Vernier Calipers (High-Speed Model LCD)

  TRUSCO NAKAYAMA

  [Features]
  · Features a high-speed model LCD.
  · Digital display for clear viewing.
  · With hold function.
  · Comes with complete inspection tables.
  [Applications]
  · Exterior measurements, interior measurements, step measurements, depth measurements.

  • STOCK

  Standard Price:	1,121,538 IDR-
  Days to Ship:	1 Day(s)

• 

  Lightweight Vernier Calipers

  NAKAMURASEISAKU

  [Features]
  · Lightweight and low cost compared to conventional M60 and M100.
  · · Made of stainless steel (SUS420J2).
  [Applications]
  · Step measurement, outer measurement, inner measurement.

  Standard Price:	20,075,385 IDR
  Days to Ship:	8 Day(s) or more

• 

  Vernier Calipers

  KTC(KYOTO TOOL)

  [Features]
  · Adopts long vernier for easy reading.
  · Gradation surface is stepped to prevent particles from entering the drive portion.

  Standard Price:	1,090,972 IDR-
  Days to Ship:	8 Day(s)

• 

  Inside Digital Calipers Knife-Edge Type

  NIIGATA SEIKI (SK)

  Features narrow jaws for a wider measurement range.
  [Features]
  · Compatible with Bluetooth Box (sold separately.)
  · Includes a hold function and an auto-OFF function (approximately 20 minutes.)
  [Applications]
  · For inside measurement.
  [Power source]
  · Includes a single CR2032 (lithium battery) for testing

  Standard Price:	8,564,615 IDR
  Days to Ship:	Quote

• 

  [Kanon] Digital Blade Caliper E-BL

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the gap between grooves for narrow grooved workpieces.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For measuring the gap between grooves for narrow workpieces.

  Standard Price:	11,241,538 IDR
  Days to Ship:	Quote

• 

  [Kanon] ULJ Caliper with Judgment Function

  NAKAMURASEISAKU

  [Features]
  · "Judgment function" allows pass/fail to be determined instantly.
  · When dividing go/no-go products for mass production parts, work time can be significantly reduced.
  · By setting the acceptance criteria for the measured workpiece in advance, the OK/NG display can be checked instantaneously on the panel.
  · Anyone can make measurements, simply and quickly.
  · The flat head tip perfectly contacts complex shapes that had been difficult to measure with conventional calipers, allowing end face measurement without stress

  Standard Price:	2,172,450 IDR
  Days to Ship:	8 Day(s) or more

• 

  [Kanon] Centerline Caliper E-RX

  NAKAMURASEISAKU

  [Features]
  · The pitch of circular holes can be measured by direct reading.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For measuring at various machining sites.

  • STOCK

  Standard Price:	16,101,538 IDR
  Days to Ship:	1 Day(s)

• 

  [Kanon] Centerline Caliper RM-DX

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch between holes of the same diameter.
  · Capable of measuring pitches "between 2 equal-diameter holes" and from end surface to hole

  • STOCK

  Standard Price:	7,673,775 IDR-
  Days to Ship:	1 Day(s) or more

• 

  [Kanon] Centerline Caliper RM-2

  NAKAMURASEISAKU

  [Features]
  · Ideal for pitch measurement of holes with different diameters.
  · Round hole pitch calipers of “offset type," with main scale probe moving vertically.
  · Since the measuring element of the main scale moves vertically, it possible to measure not only same-diameter holes but also the pitch between different diameter holes.

  Standard Price:	10,272,600 IDR-
  Days to Ship:	10 Day(s) or more

• 

  [Kanon] Centerline Caliper RM-S

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch of small diameter holes.
  · Round-hole pitch calipers ideal for measuring "small-diameter holes and narrow pitch"

  Standard Price:	8,172,812 IDR
  Days to Ship:	25 Day(s) or more

• 

  [Kanon] Centerline Caliper E-RM60B

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch between holes of the same diameter on a long workpiece.
  · Large digital calipers with a "measurement length of 600 mm" ideal for equal diameter hole measurements with long workpieces.
  · Long calipers which can measure the pitch between 2 holes of the same diameter and the distance between the edge and the hole center.
  · A dedicated gauge block is supplied as an accessory.
  · Printer output function included

  Standard Price:	24,646,251 IDR
  Days to Ship:	10 Day(s) or more

• 

  [Kanon] Standard Calipers SM

  NAKAMURASEISAKU

  Mini Calipers and Standard Long Calipers
  
  [Features]
  · Standard vernier calipers for regular measurements.
  · Standard scale type calipers with "green lines" that don't tire the eyes

  Standard Price:	670,798 IDR-
  Days to Ship:	8 Day(s) or more

• 

  [Kanon] Standard Calipers M-60P

  NAKAMURASEISAKU

  [Features]
  · Standard vernier calipers for regular measurements.
  · Lightweight calipers which, despite a long measurement length, can be held comfortably in one hand.
  · Reasonably priced too

  Standard Price:	5,884,457 IDR
  Days to Ship:	8 Day(s) or more

• 

  [Kanon] Caliper with Curre Jaw RA

  NAKAMURASEISAKU

  [Features]
  · Made of stainless steel (SUS420J2).
  · Ideal for measurements of workpieces that cannot be measured with straight jaws, such as outside measurements of dimples and internal measurements in pockets.
  [Applications]
  · For measurements of workpieces that cannot be measured with straight jaws, such as outside measurements of dimples and internal measurements in deep pockets.

  Standard Price:	10,684,615 IDR-
  Days to Ship:	1 Day(s) or more

• 

  [Kanon] Caliper for Narrow Spaces ROBA

  NAKAMURASEISAKU

  [Features]
  · The length of the inside and outside jaws is larger than that of the standard product.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For internal/external measurements in narrow/deep places.

  Standard Price:	7,661,542 IDR-
  Days to Ship:	10 Day(s) or more

• 

  [Kanon] Vernier Caliper For Inside Measurement E-ICM-J

  NAKAMURASEISAKU

  [Features]
  · Ideal for internal measurements in deep places.
  · Inside calipers with a "long-narrow jaw" ideal for inner depth measurements.
  · Long and thin jaw is ideal for internal measurements in deep holes.
  · A digital direct reading type

  Standard Price:	7,635,045 IDR
  Days to Ship:	8 Day(s) or more

• 

  [Kanon] Short Leg Caliper SBM

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring machining steps within holes.
  · "Short-leg jaw" is shaped to make measuring the stepped sections in holes easier.
  · Has a short jaw ideal for measurement for deep hole groove processing

  Standard Price:	8,024,910 IDR-
  Days to Ship:	10 Day(s) or more

• 

  [Kanon] Caliper E-PEAK

  NAKAMURASEISAKU

  [Features]
  · Evolution of calipers (leading to reduced measurement time and labor saving).
  · Automatically retains the maximum and minimum values.
  · The maximum value mode (Max) is useful for measuring inner diameters. The E-PEAK calipers automatically hold the maximum value of the inner diameter.
  · Minimum value mode is convenient for outer diameter measurements in hard-to-see places. E-PEAK calipers automatically maintain the minimum value of the outer diameter.

  • STOCK

  Standard Price:	1,432,273 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Flat Calipers Pocket

  SHINWASOKUTEI

  Calipers used for various dimensional measurements.
  [Features]
  · Lightweight, compact, and easy to carry.
  · With a strap hole.
  · Made of sturdy polycarbonate resin which contracts and expands very little with fluctuations in temperature.
  · No concern needed about scratching the measured object or generation of rust.
  [Applications]
  · Ideal for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  • STOCK

  Standard Price:	97,950 IDR-
  Days to Ship:	1 Day(s)

• 

  Vernier caliper with product certificate (product body and JCSS calibration certificate)

  SHINWASOKUTEI

  Four measurements possible: outer diameter, inner diameter, depth, and step measurement. A standard type vernier caliper that is easy to use.

  Standard Price:	1,843,748 IDR-
  Days to Ship:	25 Day(s) or more

Loading...