Vernier Calipers（Maximum Measurement Length (Range Selection)：151 to 200）

• 

  Vernier Caliper, 500 Series, ABS Digimatic Caliper CD-AX

  MITUTOYO

  This is the new, next-generation product, the digital vernier calipers CD-CX. Adopts electromagnetic induction type absolute encoder.
  Photograph is a representative product image.

  • STOCK

  Standard Price:	4,799,385 IDR-
  Days to Ship:	1 Day(s)

• 

  Digital Vernier Calipers DT Type

  NIIGATA SEIKI (SK)

  Digital calipers for measuring outer diameter, inner diameter, and level difference that can also be used for measuring depth thanks to use of a depth bar.
  [Features]
  · Standard type digital vernier calipers.
  · The digital display is easy to see.
  · With hold function.
  · With auto off function. (Approximately 20 minutes)
  [Applications]
  · Can be used for measuring outer diameter, inner diameter, level difference and depth.

  • STOCK

  Standard Price:	2,142,462 IDR
  Days to Ship:	1 Day(s)

• 

  Vernier Caliper, 500 Series, IP67ABS Coolant-Proof Caliper CD-PS/PM

  MITUTOYO

  · ABS coolant-proof calipers (standard type) achieve a protection grade of IP67, which allows the device to be securely used even in environments where it could be exposed to large amounts of coolant liquid. A complete air leak test is performed to check the airtightness and guarantee quality.
  · The LCD display uses large text that is easy to read. The high-contrast LCD display decreases fatigue.
  · Easy to operate due to a simple single-switch design.
  · The LCD display turns off when not used for approximately 20 minutes, due to an automatic power ON and OFF function. The ABS automatically restores the most recent origin position. Turns on automatically if the slide is moved.
  · Absolute Scale ABS is built in, so it is not necessary to set zero each time the power is turned ON.
  · Can also be used for step measurement.
  · The battery lid does not require a screwdriver to open it, which allows batteries to be changed quickly.
  · By changing to a low current consumption IC, battery life is increased dramatically to 5 years (prior model battery life: 3 years).
  · A statistical process control system or measurement system can be configured.
  · An inspection report is included as standard. (Note that it cannot be used to acquire calibration certification.)
  

  • STOCK

  Standard Price:	4,401,846 IDR
  Days to Ship:	1 Day(s)

• 

  Vernier Caliper, Silver Standard Calipers

  NIIGATA SEIKI (SK)

  Vernier integrated type with a scale that is easier to read and is convenient for measuring lengths and steps.
  [Features]
  · M type standard calipers.
  · Vernier integrated type with a scale that is easy to read.
  · Silver finish.
  [Applications]
  · Measurement of length, outer diameter, inner diameter, and steps.

  Standard Price:	1,185,167 IDR
  Days to Ship:	8 Day(s) or more

• 

  Vernier Caliper, Digital Calipers AD-5764A Series

  A&D

  Minimum display of 0.01 mm, large, easily visible liquid crystal display digital calipers.
  [Features]
  · High speed response (maximum response speed: 3 m/s).
  · Smooth and sliding, with no surface irregularities.
  · Equipped with data hold function and auto power off function.
  · Comes with a thumb roller that allows fine adjustment.
  [Applications]
  · Design measurements, civil engineer measurements, etc.
  · For agriculture and fishery.
  · Inspectors.

  • STOCK

  Standard Price:	1,699,231 IDR
  Days to Ship:	1 Day(s)

• 

  Digital Vernier Calipers, Left-Handed

  NIIGATA SEIKI (SK)

  Digital calipers dedicated for left-handed people.
  [Features]
  · Clearly visible digital display.
  · Material: Stainless steel
  · Power supply: SR44 (silver oxide battery) x 1 included for testing.
  [Applications]
  · Can be used for measuring outside, inside, level difference and depth.

  Standard Price:	4,417,167 IDR
  Days to Ship:	8 Day(s) or more

• 

  Digital Vernier Calipers (High-Speed Model LCD)

  TRUSCO NAKAYAMA

  [Features]
  · Features a high-speed model LCD.
  · Digital display for clear viewing.
  · With hold function.
  · Comes with complete inspection tables.
  [Applications]
  · Exterior measurements, interior measurements, step measurements, depth measurements.

  • STOCK

  Standard Price:	2,181,538 IDR
  Days to Ship:	1 Day(s)

• 

  Vernier Caliper, Dial Caliper (Titanium-Coated Type)

  MITUTOYO

  [Features]
  · Calipers for taking readings using a rack and pinion driven expansion mechanism.
  · Stable, shock-proof structure that further improves impact resistance.
  · The titanium coating protects against wear.
  [Applications]
  · Step measurement, outside measurement, inside measurement and depth measurement.

  • STOCK

  Standard Price:	4,318,462 IDR
  Days to Ship:	1 Day(s)

• 

  [Kanon] Flat Head Caliper PITA

  NAKAMURASEISAKU

  [Features]
  · 21st century standard calipers, Pita calipers.
  · "Flat head" enables easy measurement from any corner.
  · PITA15: The main scale grooves on the top and bottom scales reduce diffuse reflection on the surface with the scale markings.
  · Because the green color is easy on the eyes, they don't get tired.

  Standard Price:	1,098,943 IDR
  Days to Ship:	8 Day(s) or more

• 

  Dial Vernier Caliper DVC

  NIIGATA SEIKI (SK)

  Calipers with a Vernier scale that can be read with a dial, preventing parallax errors and misreadings.
  [Features]
  · A dial is incorporated into the calipers to enable the measured value to be read directly, without using the Vernier scale.
  · Four measurements possible with depth bar: outer diameter, inner diameter, depth, and step measurement.
  · Uses a clearly visible yellow scale plate.
  · Material: Stainless steel.
  · Silver finish.
  [Applications]
  · Outer diameter, inner diameter, level difference and depth measurements are possible.

  Standard Price:	1,815,667 IDR
  Days to Ship:	10 Day(s) or more

• 

  Vernier Caliper

  SHINWASOKUTEI

  Standard calipers.
  [Features]
  · Standard type and easy to use.
  [Applications]
  · Ideal for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  Standard Price:	681,952 IDR
  Days to Ship:	8 Day(s) or more

• • On Sale Till 31/03/2025

  

  Universal Design Standard Caliper

  TRUSCO NAKAYAMA

  [Features]
  · Universal design standard calipers.
  · The legibility of the text on the scale has been greatly improved thanks to the use of universal characters and by displaying them in graduated steps.
  · Vernier integrated type, with a scale that is easier to read.
  · Silver finish.
  [Applications]
  · Exterior measurements, interior measurements, step measurements, depth measurements.

  • STOCK

  Standard Price:	1,464,000 IDR
  	Special Price
  Days to Ship:	1 Day(s)

• 

  [Kanon] Vernier Caliper, Flat Head Caliper E-PITA

  NAKAMURASEISAKU

  The flat head makes it easy to measure from any corner.
  [Features]
  ·The design has been completely redesigned! A wide variety of sizes are also available.
  ·Digital type pita calipers.
  ·The display is large and easy to read.
  
  List of vernier calipers List of standard vernier calipers List of digital vernier calipers See how to use vernier caliper

  • STOCK

  Standard Price:	4,823,077 IDR
  Days to Ship:	1 Day(s)

• 

  [Kanon] Vernier Caliper, Dial Scale Caliper DMK-J

  NAKAMURASEISAKU

  [Features]
  · Rack and pinion type caliper.
  · The improved shock resistance allows use with no concerns.
  · Pointer needle 1 revolution 1 mm.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · Used for on-site measurements of precision machining.

  Standard Price:	1,365,914 IDR
  Days to Ship:	8 Day(s) or more

• 

  [Kanon] Centerline Caliper E-RX

  NAKAMURASEISAKU

  [Features]
  · The pitch of circular holes can be measured by direct reading.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For measuring at various machining sites.

  • STOCK

  Standard Price:	16,101,538 IDR
  Days to Ship:	1 Day(s)

• 

  [Kanon] Vernier Caliper, Centerline Caliper E-RM-J

  NAKAMURASEISAKU

  Two measurements are possible. Multifunctional round hole pitch vernier caliper.
  [Features]
  ·Both the hole-to-hole pitch and the pitch from the end face to the hole can be "directly read with a single tool".
  ·It can be read directly by offset input.
  ·By setting the upper offset value (15.00 mm) and the lower offset value (7.50 mm), this machine displays the measured pit dimensions in actual size, eliminating the need to calculate additions and subtractions to the displayed values like conventional products. has become much easier to use.
  ·With this single vernier caliper, you can directly read the pitch from hole to hole and the pitch from the edge to the hole.
  [Applications]
  ·Sheet metal processing products and construction housing.
  ·The upper and lower offset values can be easily set by pressing the "SET" button.
  
  List of vernier calipers List of hole pitch vernier calipers List of digital vernier calipers See how to use vernier caliper

  Standard Price:	13,259,014 IDR
  Days to Ship:	8 Day(s) or more

• 

  Wireless Vernier Caliper E-FW

  NAKAMURASEISAKU

  It helps shorten the quality control and measurement time.
  Just press a button to transmit measurement data.
  The measured value is sent simply by pressing a button after measurement is complete.
  As a transceiver is embedded in the caliper body, no cable is needed.
  The standardly equipped software can generate, from the measurement data, the average value, standard deviation, and pass/fail judgments.
  The receiver is a USB type which can be connected to a computer with a single touch. (1 caliper unit is included)
  
  [USB Receiver]
  · Model: USB-K1
  · Frequency band: 2.4 GHz low power radio
  · Power Source: Supplied from USB Terminal
  · Reception confirmation: LED lights up when receiving
  · Operating temperature range: 0°C – +40°C
  · Operating humidity range: 70% and below relative humidity
  · Mass: 10 g
  · Dimensions: 27 X 50.6 X 13 mm

  Standard Price:	15,016,923 IDR
  Days to Ship:	8 Day(s) or more

• 

  LR Vernier Caliper

  NIIGATA SEIKI (SK)

  Forward/backward Vernier scales improve performance with the 2 prong approach, as they enable measurements to be made with both left and right hands.
  [Features]
  · Upper/lower 2-tier type Vernier scale.
  · Supports both right and left hands, and measurement can be performed with either hand.
  · Forward/backward Vernier scales improve performance with the 2 prong approach.
  · Silver finish.
  [Applications]
  · Can be used for measuring outside, inside, level difference and depth.

  Standard Price:	1,698,308 IDR
  Days to Ship:	12 Day(s)

• 

  Dial Vernier Calipers With Carbide Tip

  NIIGATA SEIKI (SK)

  Calipers with carbide tips (inner and outer measurement surface), ideal for measuring rough machined parts, castings, grindstones, etc.
  [Features]
  · A dial is incorporated into the calipers to enable the measured value to be read directly, without using the Vernier scale.
  · Four measurements possible with depth bar: outer diameter, inner diameter, depth, and step measurement.
  · Silver finish.
  [Applications]
  · Ideal for measuring castings, grindstones, etc.
  · Can be used for measuring outer diameter, inner diameter, level difference and depth.

  Standard Price:	3,286,012 IDR
  Days to Ship:	9 Day(s) or more

• 

  Digital calipers solar panel

  SHINWASOKUTEI

  Vernier calipers which reduce battery consumption with 2-way power source type (solar panels/lithium batteries) for various dimensional measurements.
  [Features]
  · Uses stainless steel jaw.
  · Achieves high accuracy of ±0.03 mm.
  · Solar panel is activated to reduce battery consumption when ambient illumination is 200 lx or more.
  · With zero setting function to enable relative measurements and indirect measurements.
  [Applications]
  · Convenient for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.
  · The minimum read value is 0.01 mm, ideal for extremely precise work.

  • STOCK

  Standard Price:	1,730,000 IDR
  Days to Ship:	1 Day(s)

• 

  Standard Vernier Calipers

  TRUSCO NAKAYAMA

  [Features]
  · Vernier integrated type, with a scale that is easier to read.
  · Silver finish.
  [Applications]
  · Exterior measurements, interior measurements, step measurements, depth measurements.

  • STOCK

  Standard Price:	1,464,000 IDR
  Days to Ship:	1 Day(s)

• 

  [Kanon] Centerline Caliper RM-DX

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch between holes of the same diameter.
  · Capable of measuring pitches "between 2 equal-diameter holes" and from end surface to hole

  • STOCK

  Standard Price:	8,321,060 IDR
  Days to Ship:	8 Day(s) or more

• 

  [Kanon] Caliper with Curre Jaw RA

  NAKAMURASEISAKU

  [Features]
  · Made of stainless steel (SUS420J2).
  · Ideal for measurements of workpieces that cannot be measured with straight jaws, such as outside measurements of dimples and internal measurements in pockets.
  [Applications]
  · For measurements of workpieces that cannot be measured with straight jaws, such as outside measurements of dimples and internal measurements in deep pockets.

  Standard Price:	25,475,077 IDR
  Days to Ship:	1 Day(s)

• 

  [Kanon] Caliper for Narrow Spaces ROBA

  NAKAMURASEISAKU

  [Features]
  · The length of the inside and outside jaws is larger than that of the standard product.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For internal/external measurements in narrow/deep places.

  Standard Price:	8,914,599 IDR
  Days to Ship:	10 Day(s) or more

• 

  [Kanon] Vernier Caliper, Long Jaw Caliper LSM

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring diameters for spheres, pipes, etc.
  · Ideal for diameter measurement of large bore pipes, etc.

  Standard Price:	10,471,286 IDR
  Days to Ship:	12 Day(s)

• 

  [Kanon] Vernier Caliper For Inside Measurement E-ICM-J

  NAKAMURASEISAKU

  [Features]
  · Ideal for internal measurements in deep places.
  · Inside calipers with a "long-narrow jaw" ideal for inner depth measurements.
  · Long and thin jaw is ideal for internal measurements in deep holes.
  · A digital direct reading type

  Standard Price:	7,635,045 IDR
  Days to Ship:	8 Day(s) or more

• 

  [Kanon] Vernier Caliper For Inside Measurement ICM

  NAKAMURASEISAKU

  [Features]
  · Ideal for internal measurements in deep places.
  · Inside calipers with a "long-narrow jaw" ideal for inner depth measurements.
  · Long and thin jaw is ideal for internal measurements in deep holes.
  · The jaw length is available in two types, 56 mm and 76 mm

  Standard Price:	13,922,635 IDR-
  Days to Ship:	16 Day(s) or more

• 

  [Kanon] Short Leg Caliper SBM

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring machining steps within holes.
  · "Short-leg jaw" is shaped to make measuring the stepped sections in holes easier.
  · Has a short jaw ideal for measurement for deep hole groove processing

  Standard Price:	8,024,910 IDR
  Days to Ship:	14 Day(s) or more

• 

  [Kanon] Caliper E-PEAK

  NAKAMURASEISAKU

  [Features]
  · Evolution of calipers (leading to reduced measurement time and labor saving).
  · Automatically retains the maximum and minimum values.
  · The maximum value mode (Max) is useful for measuring inner diameters. The E-PEAK calipers automatically hold the maximum value of the inner diameter.
  · Minimum value mode is convenient for outer diameter measurements in hard-to-see places. E-PEAK calipers automatically maintain the minimum value of the outer diameter.

  • STOCK

  Standard Price:	4,823,077 IDR
  Days to Ship:	1 Day(s)

• 

  Vernier Caliper, Drip-proof Stainless Steel Digital Caliper

  A&D

  Easily usable drip-proof stainless steel vernier calipers with a drip-proof structure and a large liquid crystal display.
  [Features]
  · High speed response (maximum response speed: 3 m/s).
  · Smooth and sliding, with no surface irregularities.
  · Drip-proof structure IP54 (normal operation even when wet if wiped dry).
  · Equipped with data hold function and auto power off function.
  · Comes with a thumb roller that allows fine adjustment.
  [Applications]
  · For inspection work, design measurements, civil engineer measurements, etc.
  · For agriculture and fishery.

  Standard Price:	2,007,098 IDR
  Days to Ship:	8 Day(s) or more

• 

  Free-Stage Scale GVC-15KD/20KD/30KD

  NIIGATA SEIKI (SK)

  Calipers with stepped graduations, using Vernier scale decimal points that are easy to directly read together with the main scale.
  [Features]
  · The new design of the stepped scale prevents erroneous reading.
  · Continuous numbering + 2 mm point scale, so numerical values can immediately be grasped.
  · A stepped scale with easy-to-see 1 mm graduations has been adopted for the main scale.
  · The Vernier scale decimal points are easy to read directly together with the main scale.
  [Applications]
  · Used for measuring outside, inside, level difference and depth.

  Standard Price:	1,298,167 IDR
  Days to Ship:	8 Day(s) or more

• 

  Silver M Type Caliper with Fine Movement Speed

  NIIGATA SEIKI (SK)

  [Features]
  · Convenient for quantity inspection measurement of equivalent sizes.

  Standard Price:	1,328,427 IDR
  Days to Ship:	9 Day(s) or more

Loading...