Precision Machine Vises

• 

  Milling Vise with Rotating Base

  TRUSCO NAKAYAMA

  [Features]
  · Durable and tough design for each part.
  · The upper vise section can be rotated sideways 360°.
  · Attaches to milling machines and is mainly used for rough machining.

  • STOCK

  Standard Price:	8,081,692 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Precision Vise (Wrench Fastening Type) Female Thread Set for VA Type

  TRUSCO NAKAYAMA

  Precision finishing by total quenching, total grinding. Precision can be retained for long periods of time to prevent uplift. Excellent squareness and parallelism enable super-precise processing.

  Standard Price:	464,615 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Jig Vise Jaw Plates

  NABEYA

  Optional parts for the machining vise series.

  Standard Price:	4,508,037 IDR
  Days to Ship:	11 Day(s) or more

• 

  Precision Parallel Block Set

  NABEYA

  [Features]
  · The 4 sides excluding the end faces have undergone finishing grinding and are machined in pairs.
  · S50C type hardened to HRC46-53 with improved wear resistance.
  · Comes inside a strong wooden storage case.
  · Also sold separately.
  · By using a high-precision parallel block to find the parallelism, precision machining can be performed while preventing the workpiece from floating

  Standard Price:	9,199,528 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Maker's Vise Wedge locking tool

  NABEYA

  [Features]
  · The accuracy is higher than the former JIS 0 class.
  · Tightening from the front is possible when mounted on a 1, 2 or 4-sided angle plate.
  · Uses SCM440 material that is hardened to HRC50 or higher to retain precision for longer.
  · Back surface has a guide block so precision can be easily improved

  Standard Price:	23,487,263 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Hydraulic precision vise

  SUPER TOOL

  [Features]
  · A hydraulic precision vise for ultra-precision finishing.
  · Can be utilized for a wide range of grinding, cutting, and drilling.
  · The round object machining V-groove (G) is attached to the crosswise direction of the mobile jaw.
  · Sub-zero treatment minimizes aging deterioration.

  Standard Price:	58,209,847 IDR
  Days to Ship:	Quote

• 

  Mounting Bolt Set

  NABEYA

  [Features]
  A component of Machine Vise Series · A mounting bolt.
  ·Compatible vise: LT200M,LT250M,LT-HPD80E
  ·Compatible slot width: 22 mm
  ·Set contents: TNM2220 (T-slot nut), FNM0020 (flange nut), BM20100 (stud bolt)

  Standard Price:	859,015 IDR
  Days to Ship:	11 Day(s) or more

• 

  Loctite Hydraulic Machine Vise Mark III

  NABEYA

  [Features]
  · LTH3P-150 has a total length 125 mm shorter than equivalent products and a light weight at 7 kg.
  · Also, it combines hydraulic pressure and manual switching with malfunction prevention mechanism.
  · Made of ductile cast iron to minimize bending and damage during tightening.
  · The sliding part has excellent wear resistance as it has been flame quenched (HRC45).
  · The patent-pending hydraulic pump has been tested over 300,000 times, completed as a pump capable of powerful tightening with minimal failures.
  · By adjusting the position where opening/closing starts, the optimum opening in 3 positions can be achieved.

  Standard Price:	38,235,361 IDR
  Days to Ship:	26 Day(s) or more

• 

  Free Vise

  NEW STRONG

  The NSS free vise features a simple construction which is safe, reliable, and sturdy for workpiece mounting, usable on a semi-permanent basis. Use this free vise if the workpiece is too large for a normal vise or mounting clamp

  Standard Price:	10,710,000 IDR-
  Days to Ship:	36 Day(s) or more

• 

  Precision Stainless Steel Vise DM30-1/30-2

  JAPAN AUTOMATIC MACHINE

  This type enables stabler perpendicular machining. * DM30-2 is a detachable handle type.

  Standard Price:	21,422,524 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Free Vise (2-pc set)【2 Pieces Per Package】

  SUPER TOOL

  [Features]
  · Use this free vise if the workpiece is too large and cannot be installed on a vise, etc.
  · The base surface of the main body is processed with key groove to use step keys.

  Standard Price:	14,910,278 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Level Adjustment Block

  SUPER TOOL

  [Features]
  · It moves straight up and down smoothly.
  · Built-in bearing allows level adjustments to be made with minimal force.
  · Ball swivel can be set to the desired angle.

  Standard Price:	2,673,000 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Precision Vise (for ultra-precision machining)

  SUPER TOOL

  [Features]
  · A precision vise for ultra-precision finishing.
  · Can be utilized for a wide range of grinding, cutting, and drilling.
  · The round object machining V-groove (G) is attached to the crosswise direction of the mobile jaw, or the lengthwise/crosswise direction (SPV80-150).
  · Sub-zero treatment minimizes aging deterioration.

  • STOCK

  Standard Price:	18,249,693 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Machine vise (With 2-Way Angle)

  ESCO

  [Features]
  ·Can be tilted up to 90°.
  (Angle graduated)
  ·360° rotation base (with scale)
  ・ It is made of cast iron

  Standard Price:	8,549,270 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Esco precision vise

  ESCO

  You can slide and fix the jaws with just a hex key without the need to replace pins.
  No groove for clamps Accessories: Case

  Standard Price:	3,856,751 IDR-
  Days to Ship:	8 Day(s) or more

• 

  MC Power Vise VQX-N Series

  KITAGAWA IRON WORKS

  [Features]
  · It has a cast iron body with high vibration absorption
  · Firmly grasps the workpiece with high tightening force
  · The mechanical boost mechanism provides stable clamping force
  · Lifting is minimized to achieve stable machining accuracy
  · Standard parallel specification
  

  Standard Price:	39,828,791 IDR
  Days to Ship:	23 Day(s) or more

• 

  Vise Jaw - Hardened Type / Self-Cut Type -

  MISUMI

  [Features]
  ·Jaw cap for vise whose custom dimensions that can be specified, and it can be attached to any company's vise
  ·S45C type that can be self-cut, and the aluminum type in addition to the hardening material type that can be used for a long time are available

  Days to Ship:	12 Day(s) or more

• 

  Handle Joint for Loctite CV Precision Machine Vise

  NABEYA

  [Features]
  A component for Lock-Tight CV Precision Machine Vises.
  A handle joint.
  · RoHS compliant
  ·Overall length: 200 mm / 250 mm / 300 mm / 350 mm / 400 mm
  ·Compatible models: Common to all CV models

  Standard Price:	735,235 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Loctite 5-Axis Machine Vise

  NABEYA

  Raised structure that avoids the interference of the machine spindle: The length of the cutter can be shortened to reduce processing time and labor. Loctite lift prevention mechanism: A hemispherical segment is used to apply force on the movable part in a downward sloping direction at 45 degrees in order to prevent the workpiece from rising up. Socket replacement type: Three types of socket are included as standard and can be selected according to the machining conditions.

  Standard Price:	36,896,148 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Loctite Double Clamp Vise

  NABEYA

  Double clamp type when shipped. Two workpieces can be quickly clamped at the same time even when they have different sizes. When tightened, the Loctite lift prevention mechanism restrains the workpiece from rising up. Can be made into a single clamp type as the standard accessories are reassembled, and the body is made of ductile cast iron that has been quenched on the sliding surface.

  Standard Price:	50,056,708 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Loctite Precision Machine Vise L Type

  NABEYA

  The opening is 45% bigger compared with vises of the same type (LT150M). Weight is 20% lighter than vises of the same size to make it easy to carry. The lifting prevention mechanism suppresses the uplift of a movable object or workpiece. It is made of ductile cast iron, preventing warping and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched.

  Standard Price:	19,706,947 IDR-
  Days to Ship:	10 Day(s) or more

• 

  FA Mouthpiece for Machine Vise

  NABEYA

  [Features]
  A standard fitting for Machine Vise Series.
  ·Thread diameter: M8/M10/M12
  ·Compatible vise: LTFV75/LTFV100Q/LTFV·LTFH125Q/LTFV·LTFH150Q/LTFV·LTFH175Q

  Standard Price:	2,095,660 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Guide Block【2 Pieces Per Package】

  NABEYA

  S45C machine vise series guide block.

  Standard Price:	719,503 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Foot Jaw

  NABEYA

  Convenient for 5-face machining of the workpiece. Securely clamps the workpiece base. Two types of clamp are available depending on the workpiece. FOJ-BS is suitable for ferrous metals and FOJ-GS for non-ferrous metals.

  Standard Price:	6,403,380 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Pull Down Vise【2 Pieces Per Package】

  NABEYA

  Handles small mouth openings caused by defects in machine vise, milling vise, shaper vise, or similar. Can grasp without restriction by matching up the table of the planar, shaper, milling cutter, or horizontal boring machine, etc., and the workpiece. The workpiece can be prevented from rising up with strong clamping as it is pulled down while clamped. Thanks to the use of specially made ductile iron, the body is damage-proof.

  Standard Price:	7,976,453 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Loctite CV Precision Machine Vise

  NABEYA

  The opening is nearly doubled compared with vises of the same class. Equipped with a pressure replenishment mechanism which does not disturb the operation when the pressure drops, enabling cutting fluid or fine chips in the body to be ejected from the blow hole using the chip blow mechanism. For the mechanical type, the handle can be operated even on the fixed clamp side. The LTCV-TH is a hydraulic internal type with a specification in which the handle is operated from the fixed clamp side.

  Standard Price:	28,893,270 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Flat Jaw Plates for 5-Axis Machine Vise

  NABEYA

  [Features]
  A flat jaw plate for Lock-Tight 5-Axis Machine Vises.
  ·Compatible vise: LT5AU-75 (F,FM)/LT5AU-75,100 (M)/LT5AU-100 (M)

  Standard Price:	1,276,505 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Joint bar

  NABEYA

  [Features]
  A Joint bar for Lock-Tight MC Jig Vises.
  ·Effective length: 0 mm / 150 mm

  Standard Price:	692,600 IDR-
  Days to Ship:	11 Day(s) or more

• 

  2 piece vise

  NABEYA

  [Features]
  · Capable of easily clasping long objects that cannot be tightened with machine vises.
  · Can clamp any work whatever the table (milling machine, sabre, boring machine, etc.) is.
  · Convenient for processing of mass produced products.
  · Large opening depth.

  Standard Price:	15,342,196 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Loctite MC Jig Vise

  NABEYA

  A jig vise for MS.FA with a lifting prevention mechanism that suppresses the uplift of a movable object or workpiece. It incorporates a patent-pending hydraulic mechanism and enables smooth operation. Cost cutting is also possible through use as a horizontal, upright, or MC vise. Can be used for an upright MC or milling machine with the same precision as a 2-face, 4-face, or angle rest, on a horizontal type MC.

  Standard Price:	121,292,024 IDR
  Days to Ship:	11 Day(s) or more

• 

  Loctite CV Precision Machine Vise Jaws

  NABEYA

  Standard clamp for machining vise.

  Standard Price:	2,489,857 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Loctite Power Vise

  NABEYA

  Features an electric hydraulic pump and operates quietly via the installation of a muffler cover. The 70 MPa pump achieves tightening force of up to 5 t, which can be adjusted with the pressure switch of the pump. Multiple vises can be operated with one pump. Set dimensions can be achieved through handle operations, and movable parts/workpieces are restrained from rising up using a lift preventing mechanism.

  Standard Price:	57,727,147 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Work Stop

  NABEYA

  Optional parts for the machining vise series.

  Standard Price:	1,007,913 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Tool maker's vise

  NABEYA

  [Features]
  · Made of fully quenched materials, this is a precision tool that is finished by polishing.
  · The accuracy is within 5 microns in both squareness and parallelism.
  · Each machine comes with a beautiful wooden box case.

  Standard Price:	24,876,472 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Pull Down Vise Mouthpiece Coarse【2 Pieces Per Package】

  NABEYA

  Standard clamp (coarse) for pull-down vise (free jaw vise).

  Standard Price:	1,031,624 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Machine Vise Handle

  NABEYA

  Machine vise handle.
  [Features]
  · Machine vise replacement part.
  · Optional part for the machine vise series.
  [Application]
  · Replacement handle for the machine vise.

  Standard Price:	821,872 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Mold Vise

  NABEYA

  Ideal for machining mold plates. Features a large opening and fast-feed mechanism. The jaw opens 30% larger than conventional hydraulic vises to make the unit 30% more compact (in-house comparison). The main body and movable parts are made of ductile cast iron that does not get damaged, and the sliding surface features outstanding wear resistance thanks to the flame quenching. Provides overwhelmingly superior cost performance when compared with vises of the same size.

  Standard Price:	40,762,199 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Loctite Precision Machine Vise Jaws

  NABEYA

  Optional parts for the machining vise series.

  Standard Price:	2,095,660 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Thin Type Parallel Block

  NABEYA

  [Features]
  · The height is designed with the jaw depth of the vise in mind.
  · A thin type that's convenient for machining through holes close to the end face of a workpiece (especially the step type).
  · A 2-piece set.

  Standard Price:	2,487,318 IDR-
  Days to Ship:	8 Day(s) or more

• 

  CV Vise Chip Cover

  NABEYA

  Loctite CV precise machine vise parts.

  Standard Price:	716,312 IDR
  Days to Ship:	8 Day(s) or more

• 

  FA Step Mouthpiece for Machine Vise

  NABEYA

  [Features]
  A step jaw plate for Machine Vise Series.
  ·Thread diameter: M8/M10/M12
  ·Compatible vise: LTFV75/LTFV100Q/LTFV·LTFH125Q/LTFV·LTFH150Q/LTFV·LTFH175Q

  Standard Price:	2,489,857 IDR-
  Days to Ship:	10 Day(s) or more

• 

  CV Vise Chip Cover Unit

  NABEYA

  Loctite CV precise machine vise parts.

  Standard Price:	1,812,038 IDR
  Days to Ship:	8 Day(s) or more

• 

  Jig Vise Stepped Jaw Plates

  NABEYA

  [Features]
  Optional parts for machine vise series.
  Compatible models are LT630JV.

  Standard Price:	6,652,525 IDR
  Days to Ship:	26 Day(s) or more

• 

  Aluminum Double Clamp Vise Cap Set

  NABEYA

  [Features]
  · A cap set for the Loctite aluminum double clamp vise.
  · 2 Movable Bodies / 1 Fixed Jaw

  Standard Price:	4,288,931 IDR
  Days to Ship:	26 Day(s) or more

• 

  Loctite CV Precision Machine Vise Step Jaws

  NABEYA

  Fitting for precision machine vise that prevents workpieces from floating with floating prevention mechanism, and has winder type cutting chip cover that prevents cutting chips from entering main body.

  Standard Price:	4,744,693 IDR-
  Days to Ship:	11 Day(s) or more

Loading...