Vises（Page4）

• 

  JIS Vise Female Thread

  NABEYA

  Strong cast iron main body and movable body are designed to maintain sufficient strength, and it is JIS vise A type female thread with rubber ring attached to both ends of handle to prevent injury even if hands or fingers are caught during use.

  Standard Price:	1,236,588 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Aluminum Double Clamp Vise Cap Set

  NABEYA

  [Features]
  · A cap set for the Loctite aluminum double clamp vise.
  · 2 Movable Bodies / 1 Fixed Jaw

  Standard Price:	4,288,931 IDR
  Days to Ship:	26 Day(s) or more

• 

  Clamp Master Vise PA Feed Plate

  NABEYA

  This is PA feed plate of drill press vise equipped with cam lock mechanism that shortens clamping time by 50% compared to screw type, and main parts are hardening and grinding finish for high precision and long life.

  Standard Price:	351,981 IDR
  Days to Ship:	15 Day(s) or more

• 

  Clamp Master Vise Crank

  NABEYA

  Drill press vise equipped with cam lock mechanism that shortens clamping time by 50% compared to screw type, and is clamp master vise crank with high precision and long life because main parts are hardening and grinding finish.

  Standard Price:	852,817 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Clamp Master Vise Knob (Red)

  NABEYA

  Drill press vise equipped with cam lock mechanism that shortens clamping time by 50% compared to screw type, and clamp master griping ball with high precision and long life because main parts are hardening and grinding finish.

  Standard Price:	374,096 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Clamp Master Vise Connector

  NABEYA

  Drill press vise equipped with cam lock mechanism that shortens the clamping time by 50% compared to the screw type, and clamp master vise fitting with high precision and long life because main parts are hardening and grinding finish.

  Standard Price:	1,228,608 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Clamp Master Vise Check Plate

  NABEYA

  Drill press vise equipped with cam lock mechanism that shortens clamping time by 50% compared to screw type, and is stop plate for clamp master vise that is high accuracy and long-lasting because main parts are hardening and grinding finish.

  Standard Price:	162,500 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Woodwork Vise (Above Table Type)

  NABEYA

  An anvil is attached. The socket has a plate. Easy to mount.

  Standard Price:	1,150,746 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Woodwork Vise (Under Table Type)

  NABEYA

  The body, movable part, and screw head are made of tough cast iron FC250, and the guide and screw are made of steel SS400, making it robust. All parts are compatible and replaceable.

  Standard Price:	1,595,470 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Uni Lever Action Vise Guide Bar (1 pc)

  NABEYA

  Guide bar for uni lever action vise that can be operated with one hand and can be used for drill press by holding cylindrical rod or thin object with special fitting.

  Standard Price:	1,843,501 IDR
  Days to Ship:	15 Day(s) or more

• 

  Uni Lever Action Vise Clamp

  NABEYA

  Fitting of uni lever action vise that can be operated with one hand and can be used for drill press by holding cylindrical rod or thin object with special fitting.

  Standard Price:	5,312,163 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Engineer's Vise Washer

  NABEYA

  This is washer for study lead type vise with strong main body and movable body made of strong cast iron and fitting that has hardening finish to optimum hardness is heavy-duty.

  Standard Price:	52,500 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Lead Vise Rotating Table

  NABEYA

  Various parts for horizontal vise.

  Standard Price:	1,591,115 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Loctite CV Precision Machine Vise Step Jaws

  NABEYA

  Fitting for precision machine vise that prevents workpieces from floating with floating prevention mechanism, and has winder type cutting chip cover that prevents cutting chips from entering main body.

  Standard Price:	4,744,693 IDR-
  Days to Ship:	11 Day(s) or more

• 

  X-Y table K-50

  HOZAN

  X-Y table optimal for precision drilling of circuit boards, etc.
  [Features]
  · Combining it with a desk drill press makes it optimal for precision hole drilling of circuit boards, etc.
  · A small table is adopted for desktop use.
  · Workability is further enhanced by combining it with a mini vise (K-24) (with clamp, for K-21).
  [Application]
  · It also corresponds to drilling of equal pitch.

  Standard Price:	705,013 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Workpiece Stop for 5-Axis Machine Vise

  NABEYA

  Workpiece stop for 5-axis machine vise.

  Standard Price:	1,003,877 IDR
  Days to Ship:	10 Day(s) or more

• 

  Pull Down Vise Mouthpiece Fine【2 Pieces Per Package】

  NABEYA

  Standard clamp (fine) for pull-down vise (free jaw vise).

  Standard Price:	1,031,624 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Mold Vise Handle

  NABEYA

  A handle used for a mold vise.

  Standard Price:	921,276 IDR
  Days to Ship:	15 Day(s) or more

• 

  Step Jaw Plates for 5-Axis Machine Vise

  NABEYA

  It is a replacement jaw for a 5-axis machine vise step that allows you to choose from 4 mounting positions for jaw, supports wide variety of workpieces, and can always be clamped center of vise.

  Standard Price:	4,101,350 IDR-
  Days to Ship:	11 Day(s) or more

• 

  5-Axis Machine Vise Height Block Key Type

  NABEYA

  Loctite 5-axis machine vise height block (key type).

  Standard Price:	19,715,664 IDR
  Days to Ship:	26 Day(s) or more

• 

  Clamp Master Vise

  NABEYA

  [Features]
  · Clamp Master Vise adopts a cam-lock function as a new type of drilling machine.
  · Workpieces can be clamped in 50% less time compared with the screw type.
  · Ideal for drilling machine work.
  · Very strong as high-duty cast iron is used for the body and slide jaw, and special steel for the center bar and guide bar.
  · Main parts are hardened with a polished finish to retain high precision long-term

  Standard Price:	5,639,427 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Uni Lever Action Vise

  NABEYA

  Single-lever action vise guide bar.

  Standard Price:	10,242,784 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Loctite Quick ONE Vise

  NABEYA

  The mechanical pressure increase mechanism can easily increase the pressure in 1 rotation, with minimal effect of changing temperature on the tightening force and no tool replacement, etc., required. Easy to set the tightening force by simply turning the adjustment dial by hand. Once the tightening force is set, the structure allows operation only at that tightening force. LTFH type is a vertical/horizontal machining center type that's used with angle plate adhered.

  Standard Price:	36,771,098 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Loctite Hydraulic Machine Vise Jaws

  NABEYA

  Optional parts for the machining vise series.

  Standard Price:	3,293,983 IDR
  Days to Ship:	11 Day(s) or more

• 

  Loctite Precision Machine Vise

  NABEYA

  The lifting prevention mechanism suppresses the lifting of movable parts or workpieces. Made of ductile cast iron to prevent bending and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched (HRC45). The accuracy is higher than the former JIS 0 class. Even if it wears off, it can be easily disassembled to correct accuracy. The parallel accuracy of the parallel specification is within 0.01.

  Standard Price:	16,978,378 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Loctite Precision Machine Vise Step Jaws

  NABEYA

  Optional parts for the machining vise series.

  Standard Price:	2,489,857 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Step Jaw Plates for 5-Axis Machine Vise G

  NABEYA

  Loctite 5-axis machine vise step clamp (grid type).

  Standard Price:	2,118,576 IDR-
  Days to Ship:	11 Day(s) or more

• 

  5-Axis Machine Vise Height Block

  NABEYA

  Loctite 5-axis machine vise height block.

  Standard Price:	18,018,804 IDR
  Days to Ship:	26 Day(s) or more

• 

  2 piece vise mouthpiece

  NABEYA

  It is two-piece vise fitting that is ideal for machining mass-produced products, as it can hold workpieces according to table for milling machines, shapers, boring machines, etc.

  Standard Price:	3,136,441 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Claw for Foot Jaw

  NABEYA

  Convenient for 5-face machining of the workpiece. Securely clamps the workpiece base. Two types of clamp are available depending on the workpiece. FOJ-BS is suitable for ferrous metals and FOJ-GS for non-ferrous metals.

  Standard Price:	4,211,435 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Pull Down Vise Main Screw

  NABEYA

  Main screw for pull-down vise (free jaw vise).

  Standard Price:	1,685,731 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Precision Compact Drill Press Vise (Yankee Vise)

  NABEYA

  All surfaces, with the exception of the end face on the handle side, have been finished. (P150, P250, P350, P400) Bases are attached to both the body and movable part. (Excluding P770) Acme screw is used for the feed screw of P350, P400, P300 and P770, enabling powerful tightening. Cold heading is used for the stopper balls on both ends of the handle to prevent them from falling out under any circumstances.

  Standard Price:	1,849,984 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Loctite Aluminum Double Clamp Vise

  NABEYA

  Two workpieces can be clamped at the same time with one vise to shorten working time. The movable part and fixed jaw are made from aluminum, and thus lightweight. Therefore, cut the soft clamp yourself before use. The movable part can be attached and detached with one touch. The main body is made of ductile cast iron with flame quenching on the sliding surface, allowing it to be used as a single clamp type by replacing with the supplied parts.

  Standard Price:	49,769,434 IDR
  Days to Ship:	26 Day(s) or more

• 

  Loctite Hydraulic Machine Vise Step Jaws

  NABEYA

  Optional parts for the machining vise series.

  Standard Price:	3,703,912 IDR
  Days to Ship:	11 Day(s) or more

• 

  Mounting Clamp Set【2 Pieces Per Package】

  NABEYA

  Mounting clamp for machining vise.

  Standard Price:	1,432,870 IDR-
  Days to Ship:	8 Day(s) or more

• 

  5-Axis Machine Vise Parallel Stop

  NABEYA

  Loctite 5-axis machine vise parallel stop.

  Standard Price:	2,118,576 IDR
  Days to Ship:	11 Day(s) or more

• 

  2 piece vise handle

  NABEYA

  Handle for a two-piece vise that is ideal for machining mass-produced products, as it can hold workpieces according to table for milling machine, shapers, boring machines, etc.

  Standard Price:	660,910 IDR
  Days to Ship:	15 Day(s) or more

• 

  Loctite FA Precision Machine Vise

  NABEYA

  [Features]
  · Single units, multiple units, and connected use are possible.
  · The parallel accuracy is within 0.01.
  · The lifting prevention mechanism suppresses the lifting of workpieces.
  · Higher accuracy than the old JIS O class.
  · The body and fixed jaw are integrally molded to maintain high rigidity.
  · The sliding surface has excellent wear resistance as it has been flame quenched (HRC45).
  · The body is made of a ductile material that prevents warpage when tightened.
  · The opening is nearly doubled compared with vises of the same class, making it capable of clamping large workpieces.
  · It has a large opening depth and can securely tighten tall workpieces.

  Standard Price:	25,090,805 IDR
  Days to Ship:	11 Day(s) or more

• 

  Loctite MC Precision Machine Vise

  NABEYA

  When using in parallel, multiple units can be installed as it has no flange. The parallel accuracy of the parallel specification is within 0.01. Can also be used while turned sideways.

  Standard Price:	29,440,351 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Handle Joint for Loctite FA Quick ONE Vise

  NABEYA

  Handle joint for Loctite FA Quick ONE vise.

  Standard Price:	754,158 IDR-
  Days to Ship:	10 Day(s) or more

• • On Sale Till 31/03/2026

  

  L-shaped clamp (standard/lightweight type) Lightweight type

  TRUSCO NAKAYAMA

  [Features]
  · Shaft end is light with a wooden handle.
  · One-touch clamp which can be easily used in any DIY project or light work.

  • STOCK

  Standard Price:	510,940 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  L-shaped clamp (Standard type)

  TRUSCO NAKAYAMA

  [Features]
  · Shaft end is a standard wooden type.
  · Great for wide applications in woodworking and sheet metal work.

  • STOCK

  Standard Price:	820,923 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Multi-Clamp

  TRUSCO NAKAYAMA

  [Features]
  · Angle can be easily fastened using the attachment.
  · V pad can be adjusted between 90° and 180°.
  · For woodworking, furniture, sheet metal, and welding.
  · The frame is heat treated carbon steel (S55C) with a nickel chrome plating finish.

  • STOCK

  Standard Price:	670,154 IDR-
  Days to Ship:	1 Day(s)

• 

  "Multi-Clamp" Extender Block

  TRUSCO NAKAYAMA

  Option for Multi-Clamp. By using the extender block, it is possible to tighten and fix while avoiding obstacles.
  

  Standard Price:	107,692 IDR-
  Days to Ship:	Quote

• 

  "Multi-Clamp" V Pad

  TRUSCO NAKAYAMA

  V pad can be adjusted between 90° and 180°.

  • STOCK

  Standard Price:	101,846 IDR-
  Days to Ship:	1 Day(s) or more

Loading...