Lathe Jigs（Type：Rotation Center / Lathe Center）

• 

  Live Center A Type

  TAKURA KOGU

  [Features]
  · Fully quenched and polished, HRC 60-63.
  · The head drive mechanism, created from many years of experience, prevents the ingress of fine cutting powder and cutting fluid (bearing has long service life).
  · The rotation speed is up to 3,000 min-1 for MT-2, MT-3, and MT-4, 2,000 min-1 for MT-5, and 1,000 min-1 for MT-6.

  Standard Price:	2,284,951 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Rolling Center NCF

  FUTAMURA MACHINES & TOOLS

  [Features]
  · Angular bearing, thrust bearing and needle roller bearing are used for smooth rotation torque.
  · Suitable for screw cutting and edge surface processing, as A, C and E-type are fine type.
  · The labyrinth mechanism (non-contact) is adopted for the immersion prevention measures when cutting oil is used.

  Standard Price:	12,384,578 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Work Driving Center DK Claw Fixed

  FUTAMURA MACHINES & TOOLS

  [Features]
  · Ideal for gear cutting, spline processing, keyway processing, and woodworking.
  · There will be no need of chuck if this device is used.
  · As the processing items are maintained in both centers, the finishing of the processed items are the best.
  · Single-action detaching / attaching of processed items is possible.
  · By using the extraction nut, it is easy to remove from the machine.

  Standard Price:	16,547,557 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Work Driving Center HD

  FUTAMURA MACHINES & TOOLS

  [Features]
  · Center runout (maximum) against M.T. is TIR 0.01.
  · Hydraulic mechanism is adopted to the claw operation and the edge surface is maintained evenly by independent operation of the claw.
  · The claw and the center shaft are made of high-speed steel to achieve high durability.

  Standard Price:	28,068,832 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Rolling Center RST

  FUTAMURA MACHINES & TOOLS

  [Features]
  · Inside this product, there are two ball bearings on M.T No. 1 and No. 2, and 1 thrust bearing. 3 types of each of taper roller bearing, thrust bearing and ball bearing are used for M.T No. 3 to No. 7.

  • Volume Discount

  Standard Price:	6,609,188 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Bull Nose Rolling Center LCU Series

  TAKURA KOGU

  [Features]
  · The diameter of the shank base was increased and can be removed using the forcing nut equipped on the tailstock

  Standard Price:	2,544,902 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Lathe Center

  TRUSCO NAKAYAMA

  [Features]
  · It is all pure steel.
  [Applications]
  · Prevents runout of workpiece.

  • STOCK

  Standard Price:	581,077 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Lathe Center (Extra-Hard Tip)

  TRUSCO NAKAYAMA

  [Features]
  ·It has a carbide tip.
  ·Prevents workpiece vibration.
  ·Materials: Carbon steel for machine structure (S45C)

  • STOCK

  Standard Price:	1,167,231 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Rolling center NCF-N

  FUTAMURA MACHINES & TOOLS

  [Features]
  · Forcing nut is equipped on the rear part of the main body to be able to remove from the front part of the tailstock.
  · Inside this product, combined angular bearing (3 pcs) and needle bearing are used, which makes smooth rotation torque.
  · A and C type are fine type, suitable for screw cutting and edge surface processing.
  · The labyrinth mechanism (non-contact) is adopted for the immersion prevention measures when cutting oil is used.

  Standard Price:	16,923,113 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Work Driving Center, Adapter

  FUTAMURA MACHINES & TOOLS

  [Features]
  · To ensure simple use in NC machines, etc., the outer diameter (grip part) is straight.
  · If using a workpiece driving center, there is no need to disconnect the chuck: grip the adapter outer diameter with the chuck soft jaw. (Fully baked abrasive)

  Standard Price:	5,181,641 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Kabuto Finelive Center KFL

  KABUTO MFG

  [Features]
  · Waterproof structure keeps out cutting fluid by means of an air film resulting from rotation.
  · Light rotational torque ideal for fine machining or light metal working.
  · Replacement type head provides reductions in cost.

  Standard Price:	10,738,856 IDR-
  Days to Ship:	10 Day(s) or more

• 

  S Type Live Center (for High Speed)

  TAKURA KOGU

  [Features]
  · This rolling center is a live center which appropriately arranges ball bearing (mainly needle bearings) for a compact external shape with high load capacity, high rigidity and wide working range.
  · Components are designed to withstand rough use from high speed to low speed, processed with technologies from many years of tooling manufacturing for excellent compatibility and wear resistance.

  Standard Price:	3,255,379 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Lathe Center With Super Carbide

  FUTAMURA MACHINES & TOOLS

  Used for various machines and cylindrical grinders.
  (Please check the part number list for details.)

  Standard Price:	2,391,022 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Rolling Center 100 With Stickers

  FUTAMURA MACHINES & TOOLS

  [Features]
  · Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.
  · 3 bearing including 2 needle bearings and 1 thrust bearing are used inside this product, and the main body diameter is designed to be small.
  · As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.
  · V seal is adopted and suitable when cutting oil is used.

  Standard Price:	7,976,631 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Carbide Lathe Center TC Series

  TAKURA KOGU

  [Features]
  · With carbide tip, used with lathes to eliminate runout in machined products

  Standard Price:	734,403 IDR-
  Days to Ship:	8 Day(s) or more

• 

  NSK lathe jig rotation center LC-A type

  NSK

  [Features]
  · Since the run-out of center spindle tapered part is 5 µm or less, tapered roller bearings, thrust ball bearings, and needle bearings have been used.
  [Applications]
  · Workpiece support and runout prevention.

  Standard Price:	5,618,392 IDR-
  Days to Ship:	1 Day(s) or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type LF SP

  SANYOSEISAKUSYO

  With a labyrinth seal, it enables light rotation and provides waterproof performance for medium to high speed rotation. Inherits the compact design that is characteristic of NAKANE (same size as standard type LS).
  [Features]
  · With a labyrinth seal (non-contact), it provides high waterproof performance for medium to high speed rotation.
  · 2 types of tip shape, SP type and TP type, are available to choose from for optimum center selection.

  Standard Price:	4,519,750 IDR-
  Days to Ship:	10 Day(s) or more

• 

  NAKANE Rotating Center, Load Type M

  SANYOSEISAKUSYO

  Supports MT6 or later large machinery.
  [Features]
  · Uses 2 large angular bearings to maintain high accuracy.
  · Metric 80 (1/20 taper) standard lineup also.

  Standard Price:	85,271,885 IDR
  Days to Ship:	10 Day(s) or more

• 

  NAKANE Rotating Center, Bevel Type BS

  SANYOSEISAKUSYO

  For large diameter workpieces such as pipes.
  [Features]
  · Thickened shaft core and rigidity against load weight are optimal for high-precision heavy cutting.
  · Supports pipes and large I.D. workpieces. Lineup of MT2 to 4, 60° tip products.
  · Oil seal and O-ring prevent permeation of cutting fluid and cutting dust.

  Standard Price:	4,990,556 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Kabuto Seal Center KS-A

  KABUTO MFG

  [Features]
  · Waterproof structure keeps out cutting fluid by means of an oil seal.
  · Waterproof function maintained even under slower rotation.
  · Exchangeable tip provides reductions in cost.

  Standard Price:	8,298,441 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Kabuto Seal Center KS-S KS-P

  KABUTO MFG

  [Features]
  · Waterproof structure keeps out cutting fluid by means of an oil seal.
  · Waterproof function maintained even under slower rotation.
  · Exchangeable tip provides reductions in cost.

  Standard Price:	6,841,519 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Rolling Center NC70

  FUTAMURA MACHINES & TOOLS

  [Features]
  · The product is designed by focusing on the super high speed rotation (7000 min-1) and high accuracy (TIR 0.003).
  · Carbide insert is attached on the tip part to withstand abrasion and friction due to super high speed rotation. (A type)
  · By using the combined angular bearing (3 places) and two types of bearings of needle bearings inside this product, it is finely designed and assembled to withstand rigidity.
  · The use of a unique labyrinth mechanism (non-contact) as a measure to prevent immersion when cutting oil is used eliminates wear, friction, and power loss, reduces the temperature rise of the machine, and improves accuracy and reliability of lifespan.

  Standard Price:	22,216,583 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Rolling Center SR

  FUTAMURA MACHINES & TOOLS

  [Features]
  · Since the processing heat generated by the elongation of the workpiece is absorbed by the flat spring built into the center, there is no distortion of a workpiece and its finishing accuracy improves.
  · The thrust load generated by the elongation of the workpiece is also absorbed to the slide mechanism, and it is designed not to apply load to the bearing directly.

  Standard Price:	11,808,496 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Rolling Center 100

  FUTAMURA MACHINES & TOOLS

  [Features]
  · Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.
  · 2 needle bearings and 3 thrust bearings are used inside this product, and the main body diameter is designed to be small.
  · As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.

  Standard Price:	6,132,550 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Rolling Center HB

  FUTAMURA MACHINES & TOOLS

  Large bearings have been adopted and the main unit O.D. and center shaft diameter have been made thicker in order to withstand larger loads than a standard type

  Standard Price:	21,867,436 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Rolling Center RST With Carbide

  FUTAMURA MACHINES & TOOLS

  [Features]
  · External appearance, shape and structure are the same with RST type, but carbide alloy chip is low-attached to the tip part of the center.
  · As the carbide alloy insert is attached on the tip, it has superior anti-abrasion and anti-corrosion performance.

  • Volume Discount

  Standard Price:	9,601,244 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Work Driving Center, HD-Type Replacing Claw

  FUTAMURA MACHINES & TOOLS

  When the claw of the work driving center is worn and damaged, promptly replace the claw before using.

  • Volume Discount

  Standard Price:	4,079,746 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Umbrella Type Rotation Center BRC

  FUTAMURA MACHINES & TOOLS

  [Features]
  · Used for lathes and cylindrical grinding machines.
  · Used for center pushing tool of pipe type, ring type and thin processed items.
  · Inside this product, 3 types, each one of taper roller bearing, thrust bearing and ball bearing, are prepared.

  Standard Price:	9,036,819 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Carbide Long Center

  TAKURA KOGU

  [Features]
  · With carbide tip, used with lathes to eliminate runout in machined products

  Standard Price:	1,805,889 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Carbide Half Center

  TAKURA KOGU

  [Features]
  · With carbide tip, used with lathes to eliminate runout in machined products

  Standard Price:	2,495,097 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Lathe Center (Long Type, with Extra-Hard Tip)

  TRUSCO NAKAYAMA

  [Features]
  · By making the lathe center longer, the distance between the workpiece and tailstock became wider, improving the work efficiency.
  [Applications]
  · Prevents runout of workpiece.

  • STOCK

  Standard Price:	4,678,923 IDR-
  Days to Ship:	1 Day(s)

• 

  "Half Center" (with Carbide Tip)

  TRUSCO NAKAYAMA

  [Features]
  · The tip of the lathe center has been cut so as not to touch the workpiece.
  [Applications]
  · Prevents center deflection.

  • STOCK

  Standard Price:	5,613,077 IDR-
  Days to Ship:	1 Day(s)

• 

  Umbrella-shaped rotating center (with bearings/TLK)

  TRUSCO NAKAYAMA

  [Features]
  · With bearing.
  [Applications]
  · As a tool for centering holes at the pipe center.

  • STOCK

  Standard Price:	4,367,692 IDR-
  Days to Ship:	1 Day(s) or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type LF TP

  SANYOSEISAKUSYO

  With a labyrinth seal, it enables light rotation and provides waterproof performance for medium to high speed rotation.
  [Features]
  · Inherits the compact design that is characteristic of NAKANE (same size as standard type LS).
  · With a labyrinth seal (non-contact), it provides high waterproof performance for medium to high speed rotation.
  · 2 types of tip shape, SP type and TP type, are available to choose from for optimum center selection.

  Standard Price:	5,274,301 IDR-
  Days to Ship:	10 Day(s) or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type, LF, SP, with Cold Punched Nut

  SANYOSEISAKUSYO

  [Features]
  · Easy to detach and attach in front with the forcing nut. The nut fits into the same size LF type and FP type.

  Standard Price:	5,177,176 IDR-
  Days to Ship:	10 Day(s) or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type, LF, TP, with Cold Punched Nut

  SANYOSEISAKUSYO

  [Features]
  · Easy to detach and attach in front with the forcing nut. The nut fits into the same size LF type and FP type.

  Standard Price:	5,907,560 IDR-
  Days to Ship:	10 Day(s) or more

• 

  NAKANE Rotating Center, Light Torque, Waterproof Type FP SP

  SANYOSEISAKUSYO

  Oil seal exhibits waterproofing effects while not rotating.
  [Features]
  · Inherits the compact design that is characteristic of NAKANE (same size as standard type).
  · Rotation follows quick-starting machines.
  · 2 types of tip shape, SP and TP, are available to choose from for optimum center selection.

  Standard Price:	4,786,494 IDR-
  Days to Ship:	10 Day(s) or more

• 

  NAKANE Rotating Center, Light Torque, Waterproof Type FP TP

  SANYOSEISAKUSYO

  Oil seal exhibits waterproofing effects while not rotating.
  [Features]
  · Inherits the compact design that is characteristic of NAKANE (same size as standard type).
  · Rotation follows quick-starting machines.
  · 2 types of tip shape, SP and TP, are available to choose from for optimum center selection.

  Standard Price:	5,613,774 IDR-
  Days to Ship:	10 Day(s) or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type, FP, SP, with Cold Punched Nut

  SANYOSEISAKUSYO

  Easy to detach and attach in front with the forcing nut.
  [Features]
  · The nut fits into the same size LF type and FP type.

  Standard Price:	5,371,425 IDR-
  Days to Ship:	10 Day(s) or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type, FP, TP, with Cold Punched Nut

  SANYOSEISAKUSYO

  Easy to detach and attach in front with the forcing nut.
  [Features]
  · The nut fits into the same size LF type and FP type.

  Standard Price:	6,247,039 IDR-
  Days to Ship:	10 Day(s) or more

• 

  NAKANE Rotating Center, with Carbide, Light Torque, Waterproof Type FPA

  SANYOSEISAKUSYO

  [Features]
  · With carbide tip resistant to wear, for machinery with aggressively fast spindle startup and workpieces frequently mounted and removed.

  Standard Price:	9,225,487 IDR-
  Days to Ship:	10 Day(s) or more

• 

  NAKANE Rotating Center, Standard Type LS

  SANYOSEISAKUSYO

  Secures high rigidity and durability while maintaining slim shape.
  [Features]
  · By making the rotation center itself a bearing, a slim design with high rigidity and durability has been achieved.
  · General purpose waterproofing is realized during rotation because there is no opening in the forward direction.
  · Optimal for threading of thin objects, etc.

  Standard Price:	3,597,974 IDR-
  Days to Ship:	8 Day(s) or more

• 

  NAKANE Rotating Center, with Carbide, Standard Type LSA

  SANYOSEISAKUSYO

  [Features]
  · With carbide tip resistant to wear, for machinery with aggressively fast spindle startup and workpieces frequently mounted and removed.

  Standard Price:	7,357,781 IDR-
  Days to Ship:	10 Day(s) or more

• 

  NAKANE Rotating Center, Standard Type, includes Oil Sheet LSP

  SANYOSEISAKUSYO

  Equipped with both high rigidity and waterproofing
  [Features]
  · By making the rotation center itself a bearing, a slim design with high rigidity and durability has been achieved.
  · Highly waterproof and dustproof in low to medium speed regions.
  · Also ideal for grinding and hobbing machines.

  Standard Price:	4,398,452 IDR-
  Days to Ship:	8 Day(s) or more

• 

  NAKANE Rotating Center, with Carbide, Standard Type, with Oil Tool LSPA

  SANYOSEISAKUSYO

  [Features]
  · With carbide tip resistant to wear, for machinery with aggressively fast spindle startup and workpieces frequently mounted and removed.

  Standard Price:	8,667,592 IDR-
  Days to Ship:	10 Day(s) or more

Loading...