Lathe Jigs

• 

  Soft Jaw For WAK SMW Quick Jaw Change Chucks【3 Pieces Per Package】

  GIGA SELECTION

  A wide range of lineup. Made of S45C, and the jaw tip shape is flat.

  Standard Price:	1,911,086 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Live Center A Type

  TAKURA KOGU

  [Features]
  · Fully quenched and polished, HRC 60-63.
  · The head drive mechanism, created from many years of experience, prevents the ingress of fine cutting powder and cutting fluid (bearing has long service life).
  · The rotation speed is up to 3,000 min-1 for MT-2, MT-3, and MT-4, 2,000 min-1 for MT-5, and 1,000 min-1 for MT-6.

  Standard Price:	2,284,951 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Kabuto Center KC

  KABUTO MFG

  [Features]
  · Regular model for general lathes.
  · Exchangeable tip provides reductions in cost.

  Standard Price:	3,575,490 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Rolling Center NCF

  FUTAMURA MACHINES & TOOLS

  [Features]
  · Angular bearing, thrust bearing and needle roller bearing are used for smooth rotation torque.
  · Suitable for screw cutting and edge surface processing, as A, C and E-type are fine type.
  · The labyrinth mechanism (non-contact) is adopted for the immersion prevention measures when cutting oil is used.

  Standard Price:	12,384,578 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Soft Jaw (for Kitagawa)【1-3 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.

  • STOCK

  Standard Price:	727,693 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Rolling Center 100

  FUTAMURA MACHINES & TOOLS

  [Features]
  · Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.
  · 2 needle bearings and 3 thrust bearings are used inside this product, and the main body diameter is designed to be small.
  · As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.

  Standard Price:	6,132,550 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Soft Jaw【3 Pieces Per Package】

  MISUMI

  A wide range of soft jaws which suit chucks of Kitagawa and Howa is available

  • Volume Discount

  Standard Price:	460,466 IDR-
  Days to Ship:	Same day or more

• 

  Kabuto Seal Center KS-S KS-P

  KABUTO MFG

  [Features]
  · Waterproof structure keeps out cutting fluid by means of an oil seal.
  · Waterproof function maintained even under slower rotation.
  · Exchangeable tip provides reductions in cost.

  Standard Price:	6,841,519 IDR-
  Days to Ship:	10 Day(s) or more

• 

  NAKANE Rotating Center, with Carbide, Strong Type XPA

  SANYOSEISAKUSYO

  [Features]
  · With carbide tip resistant to wear, for machinery with aggressively fast spindle startup and workpieces frequently mounted and removed.

  Standard Price:	16,884,411 IDR-
  Days to Ship:	10 Day(s) or more

• 

  3-Jaw Scroll Chuck, JN-T Series (Split Jaw Type)

  KITAGAWA IRON WORKS

  [Features]·A chuck with three split jaws that work together. ·For the claws, we have adopted a cross guide that suppresses blurring and distortion even during high-speed rotation and strengthens the grasping force. Both hard and soft nails can be used, making it extremely durable and economical. [Materials]·Steel

  Standard Price:	21,822,154 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Lathe Center

  TRUSCO NAKAYAMA

  [Features]
  · It is all pure steel.
  [Applications]
  · Prevents runout of workpiece.

  • STOCK

  Standard Price:	581,077 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Kabuto Clipper Lathe Dog for Cylindrical Grinding Machine

  KABUTO MFG

  · "One-Touch" Lathe Dog, Perfect for Polishing Shafts
  · Eccentric Cam Used
  · Can be easily attached or detached with one hand.
  · Tightens as load increases to prevent slipping.
  · Retains with a flat surface to avoid scratching finished workpiece surfaces.

  Standard Price:	756,309 IDR-
  Days to Ship:	8 Day(s) or more

• 

  3-Jaw Scroll Chuck SC Series (Hard Jaw Type)

  OKUKAWATEKOUSYO

  [Features]
  · Includes both internal and external jaws that are interchangeable depending on the application.
  · High durability and economical, ideal for low volume production of a wide variety of goods.
  · Meehanite cast iron is used for the chuck main body. Superior durability and ideal for use at high-speed rotation.

  Standard Price:	8,218,121 IDR-
  Days to Ship:	10 Day(s) or more

• 

  3-Jaw Scroll Chuck SK Series (Soft Jaw / Hard Jaw Combination Type)

  OKUKAWATEKOUSYO

  [Features]
  · With the hard jaw, both internal and external diameter gripping are possible with a single jaw by reversing the top jaw.
  · The hard jaw is ideal for heavy duty cutting and the soft jaw is ideal for light cutting and precision machining.
  · Meehanite cast iron is used for the chuck main body. Superior durability and ideal for use at high-speed rotation.

  Standard Price:	10,847,039 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Lever chuck

  KOBAYASHI IRON WORKS

  [Features]
  · Ultracompact, thin and light weight.
  [Applications]
  · From desk lathes to drilling machines, compact milling machines and measuring instruments.

  Standard Price:	12,800,263 IDR-
  Days to Ship:	8 Day(s) or more

• 

  NSK lathe jig rotation center LC-A type

  NSK

  [Features]
  · Since the run-out of center spindle tapered part is 5 µm or less, tapered roller bearings, thrust ball bearings, and needle bearings have been used.
  [Applications]
  · Workpiece support and runout prevention.

  Standard Price:	5,618,392 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Tork-Loc Collet, Short

  TEIKOKU CHUCK

  This collet is compatible with the short series of draw bar models and between-center models.
  · Has an accurate plane pair.
  · Even if the positions of the arbor and collet change, it will not be affected.
  · Additional polishing is possible when deviating from the holding range.

  Standard Price:	6,947,090 IDR-
  Days to Ship:	8 Day(s) or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type LF TP

  SANYOSEISAKUSYO

  With a labyrinth seal, it enables light rotation and provides waterproof performance for medium to high speed rotation.
  [Features]
  · Inherits the compact design that is characteristic of NAKANE (same size as standard type LS).
  · With a labyrinth seal (non-contact), it provides high waterproof performance for medium to high speed rotation.
  · 2 types of tip shape, SP type and TP type, are available to choose from for optimum center selection.

  Standard Price:	5,274,301 IDR-
  Days to Ship:	10 Day(s) or more

• 

  3-Jaw Scroll Chuck (Integrated Jaw Type/Heavy-Duty)

  KITAGAWA IRON WORKS

  [Features]·For the claws, we have adopted a cross guide that suppresses blurring and distortion even during high-speed rotation and strengthens the grasping force. ·The inner and outer claws can be used interchangeably, making them extremely durable and economical.

  Standard Price:	15,021,858 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Rolling center NCF-N

  FUTAMURA MACHINES & TOOLS

  [Features]
  · Forcing nut is equipped on the rear part of the main body to be able to remove from the front part of the tailstock.
  · Inside this product, combined angular bearing (3 pcs) and needle bearing are used, which makes smooth rotation torque.
  · A and C type are fine type, suitable for screw cutting and edge surface processing.
  · The labyrinth mechanism (non-contact) is adopted for the immersion prevention measures when cutting oil is used.

  Standard Price:	16,923,113 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Rolling Center RST With Carbide

  FUTAMURA MACHINES & TOOLS

  [Features]
  · External appearance, shape and structure are the same with RST type, but carbide alloy chip is low-attached to the tip part of the center.
  · As the carbide alloy insert is attached on the tip, it has superior anti-abrasion and anti-corrosion performance.

  • Volume Discount

  Standard Price:	9,601,244 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Carbide Lathe Center TC Series

  TAKURA KOGU

  [Features]
  · With carbide tip, used with lathes to eliminate runout in machined products

  Standard Price:	734,403 IDR-
  Days to Ship:	8 Day(s) or more

• 

  NAKANE Rotating Center, Load Type M

  SANYOSEISAKUSYO

  Supports MT6 or later large machinery.
  [Features]
  · Uses 2 large angular bearings to maintain high accuracy.
  · Metric 80 (1/20 taper) standard lineup also.

  Standard Price:	47,813,073 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Kabuto Seal Center KS-A

  KABUTO MFG

  [Features]
  · Waterproof structure keeps out cutting fluid by means of an oil seal.
  · Waterproof function maintained even under slower rotation.
  · Exchangeable tip provides reductions in cost.

  Standard Price:	8,298,441 IDR-
  Days to Ship:	10 Day(s) or more

• 

  3-Jaw Scroll Chuck (Integrated Jaw Type), Interchangeable Inner and Outer Jaws

  KOBAYASHI IRON WORKS

  [Features]
  · This claw is treated with high hardness heat treatment for excellent durability.
  · Internal and external jaws can be exchanged and used for outstanding economy.

  Standard Price:	11,442,779 IDR-
  Days to Ship:	13 Day(s) or more

• 

  3-Jaw Scroll Chuck, SC/JN Series (Integrated Jaw Type)

  KITAGAWA IRON WORKS

  Scroll chuck with integrated jaw (Straight recess) SC series.
  [Features]
  · Single piece jaw type
  · Steel body for high rigidity, high durability and high rotational speed
  [Materials]
  · Stell body: cast iron

  • STOCK

  Standard Price:	13,049,613 IDR-
  Days to Ship:	1 Day(s) or more

• 

  High Jaw (for Both Howa and Kitagawa)【1-3 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.

  • STOCK

  Standard Price:	1,430,769 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Work Driving Center, Adapter

  FUTAMURA MACHINES & TOOLS

  [Features]
  · To ensure simple use in NC machines, etc., the outer diameter (grip part) is straight.
  · If using a workpiece driving center, there is no need to disconnect the chuck: grip the adapter outer diameter with the chuck soft jaw. (Fully baked abrasive)

  Standard Price:	5,181,641 IDR-
  Days to Ship:	10 Day(s) or more

• 

  S Type Live Center (for High Speed)

  TAKURA KOGU

  [Features]
  · This rolling center is a live center which appropriately arranges ball bearing (mainly needle bearings) for a compact external shape with high load capacity, high rigidity and wide working range.
  · Components are designed to withstand rough use from high speed to low speed, processed with technologies from many years of tooling manufacturing for excellent compatibility and wear resistance.

  Standard Price:	3,255,379 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Rotating Center(LC-J series)

  NSK

  [Features]
  · Size doesn't change much from dead center and uses various types of needle roller bearings for the rotating center cap.
  [Applications]
  · Workpiece support and runout prevention.

  Standard Price:	7,143,077 IDR
  Days to Ship:	Quote

• 

  Lathe Center (Long Type, with Extra-Hard Tip)

  TRUSCO NAKAYAMA

  [Features]
  · By making the lathe center longer, the distance between the workpiece and tailstock became wider, improving the work efficiency.
  [Applications]
  · Prevents runout of workpiece.

  • STOCK

  Standard Price:	4,678,923 IDR-
  Days to Ship:	1 Day(s)

• 

  Soft Jaw for Scroll Chucks【3 Pieces Per Package】

  MISUMI

  Those which suit chucks of Kitagawa are available

  • Volume Discount

  Standard Price:	546,700 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Soft Jaw Processing Jig

  MISUMI

  Not quenched and can be easily processed according to the workpiece diameter. Available at an affordable price.

  • Volume Discount

  Standard Price:	1,973,555 IDR-
  Days to Ship:	8 Day(s) or more

• 

  3-Jaw Scroll Chuck (Split Jaw Type), Easy Attachment to Lathes and Index Tables by Front Mounting

  KOBAYASHI IRON WORKS

  [Features]
  · High precision versatile type allowing the use of both hard and soft jaws.
  · It can be mounted easily on a lathe / index head table by front mounting.

  Standard Price:	13,738,462 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Work Driving Center HD

  FUTAMURA MACHINES & TOOLS

  [Features]
  · Center runout (maximum) against M.T. is TIR 0.01.
  · Hydraulic mechanism is adopted to the claw operation and the edge surface is maintained evenly by independent operation of the claw.
  · The claw and the center shaft are made of high-speed steel to achieve high durability.

  Standard Price:	28,068,832 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Carbide Long Center

  TAKURA KOGU

  [Features]
  · With carbide tip, used with lathes to eliminate runout in machined products

  Standard Price:	1,805,889 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Bull Nose Rolling Center LCU Series

  TAKURA KOGU

  [Features]
  · The diameter of the shank base was increased and can be removed using the forcing nut equipped on the tailstock

  Standard Price:	2,544,902 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Lathe Center (Extra-Hard Tip)

  TRUSCO NAKAYAMA

  [Features]
  ·It has a carbide tip.
  ·Prevents workpiece vibration.
  ·Materials: Carbon steel for machine structure (S45C)

  • STOCK

  Standard Price:	1,167,231 IDR-
  Days to Ship:	1 Day(s) or more

• 

  NAKANE Rotating Center, Light Torque, Waterproof Type FP SP

  SANYOSEISAKUSYO

  Oil seal exhibits waterproofing effects while not rotating.
  [Features]
  · Inherits the compact design that is characteristic of NAKANE (same size as standard type).
  · Rotation follows quick-starting machines.
  · 2 types of tip shape, SP and TP, are available to choose from for optimum center selection.

  Standard Price:	4,786,494 IDR-
  Days to Ship:	10 Day(s) or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type, FP, SP, with Cold Punched Nut

  SANYOSEISAKUSYO

  Easy to detach and attach in front with the forcing nut.
  [Features]
  · The nut fits into the same size LF type and FP type.

  Standard Price:	5,371,425 IDR-
  Days to Ship:	10 Day(s) or more

• 

  HO7MA / for High Jaw - Soft Jaw (for HOWA)【3 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · S45C steel, which can be easily recut and features a suitable hardness, is used.
  Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.

  Standard Price:	1,404,615 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Kabuto Center KC-6

  KABUTO MFG

  [Features]
  · Regular model for general lathes.
  · Exchangeable tip provides reductions in cost.

  Standard Price:	33,430,411 IDR
  Days to Ship:	10 Day(s) or more

• 

  Kabuto Finelive Center KFL

  KABUTO MFG

  [Features]
  · Waterproof structure keeps out cutting fluid by means of an air film resulting from rotation.
  · Light rotational torque ideal for fine machining or light metal working.
  · Replacement type head provides reductions in cost.

  Standard Price:	10,738,856 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Kabuto Finelive Center KFL-A

  KABUTO MFG

  [Features]
  · Waterproof structure keeps out cutting fluid by means of an air film resulting from rotation.
  · Light rotational torque ideal for fine machining or light metal working.
  · Replacement type head provides reductions in cost.

  Standard Price:	10,362,436 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Soft Jaw For HO Wide-Jaw Kitagawa Hydraulic/Pneumatic Chucks【3 Pieces Per Package】

  GIGA SELECTION

  A wide range of lineup. HO Wide Jaw for Kitagawa Hydraulic/Air Chuck

  Standard Price:	1,365,422 IDR-
  Days to Ship:	10 Day(s) or more

Loading...