Screws and Accessories

• 

  T-slot bolt TBM1250 to TBM24200

  SUPER TOOL

  [Features]
  · Special bolt made from precision forged carefully selected carbon steel.

  Standard Price:	125,897 IDR-
  Days to Ship:	Same day or more

• 

  T- Slot Nut

  NEW STRONG

  ·A bolt-fixing nut for T-slots.
  ·This product does not penetrate bolts to avoid damaging the bottom of the T-slot of the table.

  Standard Price:	63,612 IDR-
  Days to Ship:	1 Day(s) or more

• 

  T-Slot Bolt

  NEW STRONG

  For press die holders. Materials: S 45C, forgings, hardness: HRC 30 to 40, black oxide coating finish type.

  Standard Price:	154,389 IDR-
  Days to Ship:	Same day or more

• 

  Cam Clamp Lever A Type

  NABEYA

  A cam-shaped clamp lever for cam center clamp set.

  Standard Price:	786,030 IDR
  Days to Ship:	16 Day(s) or more

• 

  T Slot Nut (S45C) Groove Damage Protection Specification

  NABEYA

  Features a specification where the bolts do not run through to avoid damage to T-grooves caused by bolts protruding.
  [Application] Fixing bolts to the T-grooves of surface plates
  [Material] S45C
  [Heat Treatment] Quenched
  [Hardness] HRC30 ±5
  [Surface Processing] Black oxide finish
  [Screw Diameter] M8, M10, M12, M14, M16, M18, M20, M22, M24, M26, M28, M32, M36, M42

  Standard Price:	66,050 IDR-
  Days to Ship:	Same day or more

• 

  Plug Clamp Set

  NABEYA

  [Features]
  · The world's first engineering plastic (PBT resin) made clamping set.
  · Uses materials with excellent strength and rigidity, and has the highest level of elasticity of all the various types of engineering plastics.
  · Lightweight at 1/10 the weight of steel.
  · Easy to carry, allowing reduced setup time.
  · These do not rust and are ideal to use with clamps in places and for work where rust is not acceptable, allowing consistently clean use.
  · Can softly clamp workpieces without scratching them.
  · It is convenient for clamping soft materials and completed products.
  · Ideal for clamping objects for measurement using 3D measuring machines. Even if dropped, it will not mark the table or workpiece, or cause injury.
  · Can also be used as a clamp for electric discharge machines. Both synthetic and kerosene types of cutting fluid can be used.
  · Can also be used for light work clamps such as for sculpting.
  · In order to increase strength and rigidity, aluminum is used for stud bolts (A5056). Anodized and rust-proof.
  · An innovative design with fully considered functionality.

  Standard Price:	7,701,852 IDR
  Days to Ship:	14 Day(s) or more

• 

  Stud Bolt (SBM Type)

  SUPER TOOL

  [Features]
  · Sturdy.
  · It is rolling processed, so the threaded portion is resistant to wear and distortion.

  Standard Price:	188,100 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Precision Parallel Block

  NABEYA

  The 4 sides excluding the end faces have undergone finishing grinding. The machining workpiece is stabilized with the use of a parallel block, and precise work can be carried out with increased efficiency since parallelism is guaranteed.

  Standard Price:	1,234,524 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cam Center Clamp Bolt

  NABEYA

  A clamp bolt for cam center clamp set.

  Standard Price:	377,954 IDR
  Days to Ship:	24 Day(s) or more

• 

  Cam Center Clamp Lever B Type

  NABEYA

  A cam-shaped clamp lever for cam center clamp set.

  Standard Price:	1,323,699 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Goose Neck Strap BJ151

  IMAO CORPORATION

  · The clamping force is measured when clamped on the gooseneck side.
  · The color of BJ151-20160 to 24250 may vary depending on the production lot.

  Standard Price:	854,493 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Strap Clamp with Thread Hole

  SUPER TOOL

  Standard Price:	789,077 IDR-
  Days to Ship:	Quote

• 

  Swing Bolt

  NABEYA

  SBS/SBH: SUM22/SBS-S: Swing bolt made of SUS316.

  Standard Price:	293,685 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Black oxide T-slot bolt (S45C)

  NABEYA

  S45C/quenched HRC30±5 T-slot bolt.

  Standard Price:	168,779 IDR-
  Days to Ship:	8 Day(s) or more

• 

  T-Slot Bolt (High Tension)

  NABEYA

  [Strength Classification] 12.9 T-slot bolt (high tension).

  Standard Price:	292,894 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Toggle Pad

  NEW STRONG

  [Features]
  ·S45C, HRC38, black oxide coating finish type.
  ·The ball swivel prevents the clamping head from damaging the workpiece.

  Standard Price:	545,863 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Flange Nut

  SUPER TOOL

  [Features]
  Flange specification allows for stable tightening.
  [Applications]
  For fixing clamps.

  Standard Price:	69,229 IDR
  Days to Ship:	Same day

• 

  Blackened stat bolt (S45C)

  NABEYA

  S45C/quenched HRC30±5 stud bolt.

  Standard Price:	53,633 IDR-
  Days to Ship:	Same day or more

• 

  Cam Clamp Set

  NABEYA

  A cam-shaped handle allows tool-less tightening. The handle is in a low position, meaning there are no concerns about interference with the upper part.

  Standard Price:	2,631,896 IDR
  Days to Ship:	24 Day(s) or more

• 

  Cam Center Clamp Set

  NABEYA

  A cam-shaped handle allows tool-less tightening. Good operability is ensured by the tightening on the clamp lever.

  Standard Price:	2,553,011 IDR-
  Days to Ship:	16 Day(s) or more

• 

  S Nut

  NABEYA

  With a structure featuring a partial cut in the seat side screw, seat surface pressure can be uniformly applied to the outer periphery to prevent screws from becoming loose. Because resistance materials such as springs or adhesives are not used, it can be attached and removed any number of times while retaining its anti-slack effect.

  Standard Price:	40,407 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cam Clamp Lever

  NABEYA

  A cam-shaped clamp lever for cam clamp set.

  Standard Price:	724,865 IDR
  Days to Ship:	16 Day(s) or more

• 

  Clamp for Jig Tools

  NEW STRONG

  Ideal for use as a jig clamp, engraving clamp, or clamp for small objects (includes fastening bolts, FN, TN, and clamping screws)

  Standard Price:	746,100 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Strap Clamp with Screw Hole

  NEW STRONG

  [Features]
  ·A receiving threaded hole speeds up the setting time.
  ·It is used by setting a receiving bolt in the threaded hole at the rear.
  [Applications]
  To hold down workpieces.

  Standard Price:	641,197 IDR-
  Days to Ship:	8 Day(s) or more

• 

  S45C bolt with swivel pad

  NEW STRONG

  ● A receiving bolt for clamps.
  ● It can be used even if the clamp is slightly tilted.

  Standard Price:	245,477 IDR-
  Days to Ship:	11 Day(s) or more

• 

  T Slot Nut (FTS Type)

  SUPER TOOL

  [Features]
  · Caulked to prevent the bolt from protruding and causing damage to the machine table.

  Standard Price:	99,672 IDR-
  Days to Ship:	Same day or more

• 

  Pillow Block (E Type)

  NABEYA

  [Features]
  · For preventing play and misalignment of machined objects.
  · The support part is lowered by lightly pressing the center. Turn the bolt to secure the support. When setting to the required location and loosening the bolt, the support is raised by the spring force.
  · Screws, rest nuts, rest plates, aligning pads etc., can be attached to the tip of the support.
  · Comes with a low-pressure spring. Replace it to lower the pushing force.
  

  Standard Price:	823,352 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Swing Bolt (SUS)

  NABEYA

  SBS/SBH: SUM22, SBS-S: Swing bolt (SUS) made of SUS316.

  Standard Price:	939,388 IDR-
  Days to Ship:	8 Day(s) or more

• 

  T-Slot Nut (Through Hole Type)

  NABEYA

  A T-slot nut that is placed in the T-groove of a machine tool and used together with a bolt.
  [Features]
  ·A screw hole passes through.
  ·Materials: S45C.
  ·Heat treatment: hardening HRC30 ±5.
  ·Surface treatment: Black oxide coating.
  [Applications]
  ·Put it in the T-groove of the machine tool and use it together with the bolt.

  Standard Price:	69,393 IDR-
  Days to Ship:	Same day or more

• 

  Clamping Kit

  NEW STRONG

  All machined objects during manufacturing work can be clamped straight away

  Standard Price:	10,174,795 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Support Screw for Adjusting Clamp

  NABEYA

  Support screw for S 45C / hardening adjustment clamp.

  Standard Price:	387,915 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Knurled Lock Nut

  NABEYA

  SUM22/quenched HRC35-40 knurled lock nut.

  Standard Price:	469,498 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Insert Tool for Clamp Pin

  NABEYA

  A dedicated tool for mounting clamp pins. Please use a dedicated tool that can be inserted accurately for installation.

  Standard Price:	396,370 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Strap clamp with threaded hole

  NABEYA

  S45C/quenched HRC30±5 threaded strap clamp.

  Standard Price:	396,301 IDR-
  Days to Ship:	8 Day(s) or more

• 

  A-type V Block【2 Pieces Per Package】

  NABEYA

  The pair difference of the V groove with respect to the two reference planes a and c is MC0.05 and GS/FS0.03.

  Standard Price:	1,062,292 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Stopper bolt (SSB-B)

  NABEYA

  For positioning the workpiece, or as a stopper, etc. The spherical part has been quenched. Excellent Abrasion Resistance.

  Standard Price:	52,824 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Black Oxide Flange Nut (S45C)

  NABEYA

  Flanged nut.
  [Features]
  · HRC30±5 quenching provides a long service life.
  [Application]
  · Optimal for tightening clamps.

  Standard Price:	78,579 IDR-
  Days to Ship:	Same day or more

• 

  Slide Strap Clamp

  NEW STRONG

  Using the reset bolt and clamp support, loosen the nut and slide the main body to the right and left to smoothly detach the workpiece.

  Standard Price:	495,935 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Press U Clamp【1-2 Pieces Per Package】

  NEW STRONG

  Use for mounting blanking dies and workpieces for presses. A strong clamp

  Standard Price:	1,702,800 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Clamping Stud Bolt (with Wrench Catcher)

  NEW STRONG

  The length of the threaded portion at each end is different. A wrench hanging hook is included. T-slot nut biting can also easily be removed

  Standard Price:	134,100 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Stud Bolt (Inch Size)

  NEW STRONG

  When bolt is tightened, the thread component should ideally be protruding 1-2 pitches from the tip of the nut.

  Standard Price:	124,740 IDR
  Days to Ship:	8 Day(s) or more

• 

  Vacuum Fastener

  SUPER TOOL

  [Features]
  · Air from the compressor instantly adsorbs and fixates workpieces.
  · Can be used in machine tools of machining centers and polishing machines etc.
  · Since a vacuum ejector is used, a dedicated vacuum pump is not required (integrated model).
  · Usable by simply inserting a one-touch pipe joint tube from a compressor in the factory.
  · Ideal for non-magnetic materials such as stainless steel, aluminum, resin, etc. as it suctions using air.
  · Because small amounts of air will be emitted from the φ1 vacuum hole when the valve is off, its structure helps prevent foreign matter from intruding into air passages.
  · Almost all parts are assembled on the front panel, which facilitates maintenance, including replacement of parts.
  · Has a built-in pressure reducing valve for greater economy by adjusting the adsorption force or reducing air consumption.
  · Mounting holes for hexagon socket head cap screws allow parallel specifications.

  Standard Price:	27,779,783 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Swivel New Clamp (2 Pc 1 Set)【2 Pieces Per Package】

  SUPER TOOL

  [Features]
  · Clamp height can be freely adjusted. Enables stable clamping work.
  · A swivel pad is attached to both ends of the clamping surface to prevent damaging machine beds or machined objects.

  Standard Price:	2,178,000 IDR-
  Days to Ship:	1 Day(s) or more

• 

  U Clamp with Screw Hole Black S45C

  SUPER TOOL

  [Features]
  · By combining with a swivel bolt (CHS4000 to 8000), the height can be adjusted easily to secure workpieces.

  Standard Price:	574,200 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Strap with Screw Holes BJ158

  IMAO CORPORATION

  [Applications]·It has a maximum length of slotted holes, so it has high versatility.

  Standard Price:	487,657 IDR-
  Days to Ship:	Same day or more

Loading...