Clamp Units (for Manual Tightening)

• 

  Toggle Hook Clamp 6848V

  NABEYA

  6848VNI is made of stainless steel. The hook length can be adjusted.

  Standard Price:	1,119,389 IDR-
  Days to Ship:	8 Day(s) or more

• 

  TAK Clamp (Eccentric Washer Cam Clamp)

  MISUMI

  [Features]
  ·Workpieces can be clamped simply by tightening bolts, so setup time can be reduced
  ·Load in table direction is applied to workpiece by action of tapered surface of washer, which suppresses lifting of workpiece

  • Volume Discount

  Standard Price:	140,289 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Nut Runner Clamp Large Model

  NABEYA

  A clamp bar for L-type nut runners. This product can be additionally processed by the customer.
  
  [Features]
  · Torque control and speedy clamping can be performed by using Nut Runner.
  · Quasi-hydraulic operability, no piping is required so it is handy to use.
  · Clamp bar springs up to easily attach/detach the workpiece.
  · Free from troubles such as oil leakage as it does not use oil.

  Standard Price:	9,625,877 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Toa Adjust Clamp【2 Pieces Per Package】

  MISUMI

  Ideal for clamping thin workpieces. Fastening the toe pressing downwardly allows to prevent the machining material from floating.
  Long-lasting use is possible because the tow is quenched.

  • Volume Discount

  Standard Price:	6,414,889 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Nut Runner Clamp Small Model

  NABEYA

  [Features]
  · Torque control and speedy clamping can be performed by using Nut Runner.
  · Quasi-hydraulic operability, no piping is required so it is handy to use.
  · Use Nut Runner for speedy clamping.
  · Clamp cover rotates 90 degrees (rotation direction can be chosen).
  · Free from troubles such as oil leakage as it does not use oil.

  Standard Price:	9,031,305 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Holding Clamp Set

  MISUMI

  Supplied with a hex bar wrench. Complete fastening with sliding mechanism.
  One-point attachment and detachment allow time reduction.
  For full surface machining of the work piece and perforating.
  Complete heat treatment allows semipermanent use. Floating prevention mechanism type.

  • Volume Discount

  Standard Price:	3,982,845 IDR
  Days to Ship:	8 Day(s) or more

• 

  Four-Groove

  NABEYA

  Maximum tightening force: 40 kN (tightening torque: 190 N·m)

  Standard Price:	34,685,757 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Clamp Bar for Nut Runner Clamp Large Model

  NABEYA

  A clamp bar for L-type nut runners. This product can be additionally processed by the customer.

  Standard Price:	940,561 IDR
  Days to Ship:	16 Day(s) or more

• 

  Nut Runner Clamp Small Base

  NABEYA

  [Features]
  · Mounting base for Nut Runner small model.
  · It consists of three blocks.
  · The height can be changed depending on the combination.
  · Mounting bolts, connection bolts (hex socket bolts) included

  Standard Price:	4,872,835 IDR
  Days to Ship:	16 Day(s) or more

• 

  Clamp Bar for Nut Runner Clamp Small Model

  NABEYA

  [Features]
  · Clamp bar for Nut Runner small model.
  · With hex socket set screws for positioning (rod tip).
  · NRCS-03C/06C/10C: Can be used immediately after purchase.
  · NRCSS-03CS/06CS/10CS: A material type to be processed by the customer

  Standard Price:	2,250,144 IDR
  Days to Ship:	16 Day(s) or more

• 

  T-Slot Mini Clamp

  NEW STRONG

  [Features]
  · Ideal for clamping thin workpieces.
  · Setup can be completed easily by using the T-groove.
  · Simply tighten the enamel screw with a wrench and it is ready to use.

  Standard Price:	3,612,729 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Pillow Block

  NEW STRONG

  Ideal for preventing chattering and misalignment of warped workpieces. Support area is lifted by spring action, and vibration and misalignment can be prevented easily for each workpiece by fixing with bolts

  Standard Price:	1,797,804 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Strap Clamp

  NEW STRONG

  [Features]Materials: S 45C, Hardness: HRC35, black oxide coating finish type.

  Standard Price:	286,868 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Slot Heel Strap Clamp

  NEW STRONG

  A slotted heel strap clamp with a black oxide coating finish.
  Material: S45C

  Standard Price:	537,995 IDR
  Days to Ship:	8 Day(s) or more

• 

  Mega Lock Clamp, Standard Type

  SUPER TOOL

  [Features]
  · Compact design which enables effective use of space for jigs and tools, or machine tables.
  · Clamps the workpiece while holding it at a constant height.
  · The spring type slide clamp makes it easy to attach/detach workpieces.

  Standard Price:	3,593,727 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Mega Lock Clamp, Long Type

  SUPER TOOL

  [Features]
  · Compact design which enables effective use of space for jigs and tools, or machine tables.
  · The spring type slide clamp makes it easy to attach/detach workpieces.
  · Ideal for workpieces placed on a table surface.

  Standard Price:	3,816,041 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Rubber Cap 6893

  NABEYA

  Dedicated clamping screw for toggle clamps.

  Standard Price:	71,548 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Swing Clamp S Type

  NABEYA

  An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

  Standard Price:	630,215 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Heavy Duty Toggle Hook Clamp 6849PH

  NABEYA

  Heavy-duty type hook clamp. The hook length can be adjusted.

  Standard Price:	4,727,835 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Wedge Clamp Set (For tapped holes)

  NABEYA

  The workpiece is prevented from rising up by being fastened downward. Ideal for machining through holes.

  Standard Price:	2,912,553 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Swing Clamp B Type

  NABEYA

  It can be horizontally swung to attach and remove workpieces. Can be used for T-grooves and for tapped holes. Automatically rises via a built-in spring when unclamped. Attachments can be mounted.

  Standard Price:	5,221,476 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Toggle Down Clamp 6833

  NABEYA

  Hold down toggle clamp 6833 made of SS400 and zinc plating.

  Standard Price:	1,684,362 IDR
  Days to Ship:	16 Day(s) or more

• 

  Toggle Side Clamp 6841

  NABEYA

  6841: SS400, 6841NI: SUS304/6841: Zinc-plated toggle side clamp 6841.

  Standard Price:	1,126,683 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Toggle Hook Clamp 6848H

  NABEYA

  6848HNI is made of stainless steel. The hook length can be adjusted.

  Standard Price:	1,120,356 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Heavy Duty Toggle Side Clamp 6842

  NABEYA

  Can be used for either pushing or pulling. Clamping screw and rubber cap attached.

  Standard Price:	2,680,064 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Adjusting Clamp

  NABEYA

  Clamps for fixing workpieces on machining centers, milling machines, etc.
  [Features]
  ·Standard type with T-slot bolt.
  [Applications]
  ·Convenient for fixing the workpiece.

  Standard Price:	1,021,544 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Slide Clamp B Type

  NEW STRONG

  Use when the height is too low for the A type and too high for the free vise.

  Standard Price:	6,334,121 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Hydraulic single-action compact cylinder

  NABEYA

  [Features]
  · Low pressure/high pressure (0.8 to 25 MPa) push cylinder

  Standard Price:	3,152,045 IDR
  Days to Ship:	32 Day(s) or more

• 

  Slide Clamp A type (set of 2) 【2 Pieces Per Package】

  SUPER TOOL

  [Features]
  · The tip of the jaw is engraved with a rack to clamp the workpiece downwards.
  · Operation consists of inserting the wrench, and tightening in order to clamp the workpiece by the clamp head sliding along a 45° inclination.

  Standard Price:	3,738,137 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Arm Clamp

  NABEYA

  Forged S45C/hardened HRC45 arm clamp.

  Standard Price:	757,670 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Quick Down Clamp (Compact/medium)

  NABEYA

  Flat jaw and angled handle for quick hold down clamp (medium).

  Standard Price:	4,834,244 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Bar for Quick Lock

  NABEYA

  [Features]
  · Bar for Quick Lock.
  · Annoying thread feeding when clamping is not necessary.
  · A one-action clamp that adopts a cam lock mechanism

  Standard Price:	551,413 IDR-
  Days to Ship:	17 Day(s) or more

• 

  Check plate for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Standard Price:	80,154 IDR-
  Days to Ship:	17 Day(s) or more

• 

  Clamp Part of Wedge Clamp (For T-shaped grooves)

  NABEYA

  For the T-slot on the clamping part of the wedge clamp set. Compatible T-groove 14 mm to 22 mm, clamp stroke 6 mm. The workpiece contact surface is a flat type. The manufacturer also sells the clamp part only.

  Standard Price:	2,869,108 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Wedge Clamp Set (For T-shaped grooves)

  NABEYA

  Wedge clamp set for T-grooves, flat type.

  Standard Price:	4,675,694 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Swing Clamp Holder S Type

  NABEYA

  An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

  Standard Price:	277,841 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Swing Clamp Height Adjusting Support

  NABEYA

  Of course, it can also be used for height adjustment in fixing workpieces. It can be used for both T-grooves and tap holes.

  Standard Price:	1,047,432 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Double swing clamp S type

  NABEYA

  This product can clamp 2 workpieces at the same time. Due to its compact structure (cylinder diameter 10 mm to 30 mm), it can be used in small spaces. The freely rotatable structure saves time in loading and unloading workpieces.

  Standard Price:	869,669 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Toe Adjusting Clamp TCH Type

  NABEYA

  Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.

  Standard Price:	4,576,597 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Toggle Side Clamp 6844

  NABEYA

  6844: SS400/6844NI: SUS304/6844: Zinc-plated toggle side clamp 6844.

  Standard Price:	2,766,199 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Base Unit 7110F

  NABEYA

  It is the base part of the Clamp Unit 7110 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.

  Standard Price:	3,317,322 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Base Unit 7110FA

  NABEYA

  It will be the base part of the Clamp Unit 7111 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.

  Standard Price:	6,379,363 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Hold Clamp, Stopper

  NABEYA

  Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.

  Standard Price:	2,786,197 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Hold Clamp Set

  NABEYA

  Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.

  Standard Price:	4,832,124 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Mini Low Height Clamp

  NABEYA

  With wrench operation from the side, the jaw is locked in the downward direction, and the workpiece does not rise up.

  Standard Price:	2,891,002 IDR-
  Days to Ship:	16 Day(s) or more

Loading...