Jigs for Manual Tightening（Page4）

• 

  Eccentric rough guide

  NABEYA

  A part for guiding workpieces when setting them or replacement plates, etc., to jigs. Made of resin to avoid scratching important workpieces. Variation of the workpiece can be adjusted with an eccentricity of 2 mm.

  Standard Price:	193,333 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Extension Tool for Q Lock (Side Type)

  NABEYA

  Main body: S45C / Hex joint: SCM440, Hexagonal joint part: Hardened HRC52 to 58 / Joint bar (double-end surface): Induction hardened HRC36 to 44, Q-lock element side operated type extension tool.

  Standard Price:	1,032,564 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Rough Guide for Q Lock (Side Type)

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Made of MC nylon so does not scratch the jig pallet. As it is located outside the jig, it is easy to attach the jig.

  Standard Price:	1,318,223 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Rough Guide Pin for Q Lock (Side Type)

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Placed inside the jig to prevent interference with surrounding objects.

  Standard Price:	536,858 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Q Lock (Screw Type) Clamp Pin

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Standard Price:	1,937,257 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Q Lock (Screw Type) Clamp Bushing

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Standard Price:	1,732,293 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Q Lock (Screw Type) Diamond Pin

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Standard Price:	2,441,803 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Q Lock (Screw Type) Locating Pin

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Standard Price:	2,110,759 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Q Lock (Screw Type) Locating Bushing

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Standard Price:	1,905,795 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Q Lock Coupling Socket

  NABEYA

  A pneumatic/hydraulic joint developed for the Q-lock element. Can supply air for seating confirmation from the mother jig to the daughter jig, and also supply hydraulic pressure. The fluid circuit can be easily attached/detached when replacing the jig.

  Standard Price:	2,589,495 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Q Lock Fast Tightening Diamond Pin

  NABEYA

  Q-lock element diamond pin (quick feed type).

  Standard Price:	2,500,170 IDR-
  Days to Ship:	24 Day(s) or more

• 

  Q Lock Fast Tightening Locating Pin

  NABEYA

  Q-lock element locating pin (quick feed type).

  Standard Price:	2,421,768 IDR-
  Days to Ship:	24 Day(s) or more

• 

  Height Cylinder for Q Lock

  NABEYA

  Install it between the pitches of the Q-lock element to prevent deflection and chattering of the jig base.

  Standard Price:	558,541 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Rough Guide for Q Lock

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Made of MC nylon so does not scratch the jig pallet. As it is located outside the jig, it is easy to attach the jig.

  Standard Price:	874,500 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Rough Guide Pin for Q Lock

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Placed inside the jig to prevent interference with surrounding objects.

  Standard Price:	481,500 IDR-
  Days to Ship:	8 Day(s) or more

• 

  T-Slot Block

  NABEYA

  Convenient for clamp table and raising blocks of large machinery workpieces.

  Standard Price:	10,886,011 IDR-
  Days to Ship:	16 Day(s) or more

• 

  V Block Guide Block【2 Pieces Per Package】

  NABEYA

  For installation, use E-660 socket screws (sold separately).

  Standard Price:	806,890 IDR-
  Days to Ship:	24 Day(s) or more

• 

  Adjusting Stopper Pin

  NABEYA

  SUM22/black oxide finished adjustable stopper pin.

  Standard Price:	1,297,888 IDR
  Days to Ship:	24 Day(s) or more

• 

  Adjustment Stop

  NABEYA

  For stoppers. Rotation Stopper

  Standard Price:	1,692,916 IDR-
  Days to Ship:	26 Day(s) or more

• 

  Guide Block (Open Type)【2 Pieces Per Package】

  NABEYA

  After setting the fixed object in the given position, place the guide block in the T-groove to position.

  Standard Price:	1,259,337 IDR-
  Days to Ship:	24 Day(s) or more

• 

  Guide Block (Stepped Type)【2 Pieces Per Package】

  NABEYA

  It is screw-fastened on a fixed object or vise with 20 mm key groove. Can be used in any machine with varied guide block sizes available.

  Standard Price:	1,502,230 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Locating Pin Type A with Grip

  NABEYA

  SUM22/quenched HRC locating pin A with grip.

  Standard Price:	540,239 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Bar Plate (T-Groove) Type

  NABEYA

  S50C/quenched HRC50 +5/0 bar plate (T groove type).

  Standard Price:	21,042,422 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Flange Locating Pin (Diamond Pin)

  NABEYA

  Because a flange is included, it can be secured with a screw from the top. Dimension A in 0.1 increments and dimension A tolerance specially corresponding to h6, m6 and p6 is possible. It is a standard tip tapered shape. Diamond pin allows selection of the orientation of the diamond. (PFD/PFDS type)

  Standard Price:	1,030,591 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Flange Locating Pin (Diamond Pin S)

  NABEYA

  Because a flange is included, it can be secured with a screw from the top. Dimension A in 0.1 increments and dimension A tolerance specially corresponding to h6, m6 and p6 is possible. It is a standard tip tapered shape. Diamond pin allows selection of the orientation of the diamond. (PFD/PFDS type)

  Standard Price:	1,219,824 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Flex Support

  NABEYA

  Easily supports and clamps unstable workpieces that are measured with a 3D measuring machine: 169 support pins support complex three-dimensional curved surfaces, shortening changeover time. The support pin can be fixed with a single clamp lever, and the clamp position can be freely adjusted vertically and laterally according to the workpiece shape. . Can also be used for long workpieces by using multiple units.

  Standard Price:	14,286,393 IDR
  Days to Ship:	16 Day(s) or more

• 

  Locating Pin A Type (Self Cut Product)

  NABEYA

  Machine outer diameters A and B according to the tolerance specified by the user. (Self Cut Product)

  Standard Price:	296,876 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Locating Pin A Type (Finishing Product)

  NABEYA

  Outer diameters A and B have ground finish (finished product)

  Standard Price:	623,595 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Locating Pin B Type (Self Cut Product)

  NABEYA

  Machine outer diameters A and B according to the tolerance specified by the user. (Self Cut Product)

  Standard Price:	361,620 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Locating Pin B Type (Finishing Product)

  NABEYA

  This product comes with A-type and B-type locating pins with grinding finish.

  Standard Price:	788,648 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Locating Pin (Adjustable Diameter Pin)

  NABEYA

  [Features]
  · A single wrench with the positioning repeatability of 5 μm.
  · Zero clearance with the reference hole and use of a high precision positioning pin makes it ideal for replacing plates or small-scale generalization.
  · The locating adjustment pin is a manually operated high-precision positioning pin whose diameter expands and contracts.
  · Locating adjustable pin creates zero gap.

  Standard Price:	2,050,599 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Locating Pin (Adjustable Round Pin)

  NABEYA

  [Features]
  · A single wrench with the positioning repeatability of 5 μm.
  · Zero clearance with the reference hole and use of a high precision positioning pin makes it ideal for replacing plates or small-scale generalization.
  · The locating adjustment pin is a manually operated high-precision positioning pin whose diameter expands and contracts.
  · Locating adjustable pin creates zero gap.

  Standard Price:	2,050,599 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Locating Pin (Inch Finish Round Pin)

  NABEYA

  Inch finish used for jigs and components in the aviation industry (φA only). In order to improve the efficiency of driving work, the lead part has undergone finishing grinding in 2 stages. The hardness is set low.

  Standard Price:	831,936 IDR
  Days to Ship:	24 Day(s) or more

• 

  Locating Pin (Ball DLC)

  NABEYA

  Compared with chamfering pins, galling is less likely to occur during insertion, making it ideal for use as a positioning pin for robot jigs or workpieces. The 1 mm width around the reference plane enables stable positioning. The reference surface is given a DLC (Diamond-Like Carbon) coating, providing excellent abrasion resistance.

  Standard Price:	764,291 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Locating Pin (Ball DLC Diameter)

  NABEYA

  Compared with chamfering pins, galling is less likely to occur during insertion, making it ideal for use as a positioning pin for robot jigs or workpieces. The 1 mm width around the reference plane enables stable positioning. The reference surface is given a DLC (Diamond-Like Carbon) coating, providing excellent abrasion resistance.

  Standard Price:	821,061 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Locate Cylinder

  NABEYA

  Body: SCM420 / rhombic nut: S45C-D, Hardened HRC56 ±2 locating cylinder (positioning stopper).

  Standard Price:	1,307,652 IDR-
  Days to Ship:	18 Day(s) or more

• 

  Locating Pin

  NABEYA

  Socket screw fixing type positioning pin. Can be used repeatedly. Mounting bolts are sold separately. Use socket screws.

  Standard Price:	532,176 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Work Stopper

  NABEYA

  S45C/quenched HRC30±5 work stopper.

  Standard Price:	2,369,785 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Eccentric height cylinder

  NABEYA

  SCM420, Hardening HRC60 eccentricity height cylinder.
  Compatible bolts are M12/16.

  Standard Price:	654,197 IDR-
  Days to Ship:	18 Day(s) or more

• 

  Slide Clamp A Type

  NEW STRONG

  [Features]
  · Ideal for clamping thin workpieces.
  · Tightening is performed while pressing the toe (tip) downward against the workpiece, preventing the workpiece from lifting.
  · Built-in push screws are heat-treated and excellent in durability.
  · To operate, just tighten with the wrench

  Standard Price:	5,814,779 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Slide Clamp B Type

  NEW STRONG

  Use when the height is too low for the A type and too high for the free vise.

  Standard Price:	6,334,121 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Slide Clamp ASG Type

  NEW STRONG

  Suitable for clamping in narrow spaces.
  Used for thin workpieces.
  Prevents floating.
  Simply inserted and tightened with a wrench.

  Standard Price:	3,025,277 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Slide Clamp BSG Type

  NEW STRONG

  2 types are available: one for flat surfaces and the other for black leather.
  Suitable for machining thin materials.
  Prevents floating.
  Simply inserted and tightened with a wrench.

  Standard Price:	2,826,023 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Side Clamp

  NEW STRONG

  Can be inserted into grooves of sub-tables, etc., and used for positioning, correcting parallels, clamping work, and more

  Standard Price:	981,000 IDR-
  Days to Ship:	8 Day(s) or more

• 

  T-Slot Mini Clamp

  NEW STRONG

  [Features]
  · Ideal for clamping thin workpieces.
  · Setup can be completed easily by using the T-groove.
  · Simply tighten the enamel screw with a wrench and it is ready to use.

  Standard Price:	3,612,729 IDR-
  Days to Ship:	8 Day(s) or more

Loading...