Products for Coolants

• 

  Fuso "Cool Dumbo" (bellows tube air nozzle) round blow

  FUSOSEIKI

  [Features]
  ·A one-touch magnet nozzle for air.
  ·You can freely change the spray direction.
  ·It is made of a pressure-resistant bellows tube, so the jet does not fluctuate easily.
  [Applications]
  ·Powerful duster, cooling, drying, and draining. (Please use MAGIC CUT e-mist for spraying cutting fluid.)
  ·For removing chips from workpieces, blowing away small press items, removing dust, etc.

  Standard Price:	1,793,829 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Air Cooler

  TOHIN SHOJI

  [Features]
  ·No refrigerant or electricity is used.
  ·Ultra-low temperature air is generated at the same time that compressed air is supplied.
  ·The cold air that is injected is at atmospheric pressure.
  ·Cool air volume and cold air temperature can be easily adjusted using the adjustment screws on the device.
  ·You can set the required air volume and temperature.
  ·It's small and light, so it's easy to set up.
  ·It has a small capacity and is particularly effective for localized cooling.
  ·There are no malfunctions.
  ·It uses only compressed air and has no moving parts, so there is no risk of failure.
  ·Equipped with a silencing mechanism.
  ·Silencers are set on the cold air discharge side and the hot air discharge side.
  ·It can be used in places where electricity is not available, such as in explosion-proof areas.
  ·Since there are no moving parts, there is no need to worry about breakdowns.
  [Applications]
  ·For cooling blades during metal cutting.
  ·For cooling various electronic devices (control panels, etc.).
  ·For cooling heat seals.

  Standard Price:	12,956,924 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Dumbo Nozzle for Cool Dumbo (No Base, Flexible Tube Air Nozzle)

  FUSOSEIKI

  [Features]
  ·This is a single Cool Dumbo nozzle. It does not come with a magnetic base.
  ·You can adjust the flow rate by turning the tip cap.
  [Applications]
  ·Air nozzle: Automatic duster, tool cooling, removal of chips from workpieces, draining water, blowing off small press items, etc.

  Standard Price:	719,100 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Flexible Oil Nozzle

  TRUSCO NAKAYAMA

  [Features]
  · The special processing extends the life of the blade tip and clearly finishes worked surfaces.
  · The tip of the nozzle does not tilt forward compared to a plastic one.
  [Applications]
  · For cutting, cooling, and lubrication nozzles.
  · It is attached to the machine tool body and used for lubrication and cooling.

  • STOCK

  Standard Price:	822,963 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Oil Gun

  TRUSCO NAKAYAMA

  [Features]
  · This product is capable of washing chip powder and the like generated by machine tools such as CNC/CMC by feeding cutting oil of the machine from the circulating pump to the oil gun.
  [Applications]
  · Cleaning the inside of machine tools.

  • STOCK

  Standard Price:	854,872 IDR-
  Days to Ship:	1 Day(s)

• 

  Magnet for Air Jet

  TRUSCO NAKAYAMA

  [Features]
  · An ultra-strong ON/OFF small magnet of 320 N.
  · The bottom surface has V-shape processing (150°) and can adhere to not only flat surfaces but also cylindrical surfaces.
  · Equipped with three screw holes Rc1/4. Can also be used for cutting fluids.
  · Allows easy setting.
  · Grinding finished surface adsorption force is S20C and plate thickness is 200 mm.
  [Applications]
  · For cutting fluid lubrication.
  · Manifold with strong small magnet, for 1/4" nozzles.

  • STOCK

  Standard Price:	770,940 IDR
  Days to Ship:	12 Day(s)

• 

  "Coolant Liner" (Rolled Hose)

  TRUSCO NAKAYAMA

  [Features]
  · Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.

  • STOCK

  Standard Price:	11,663,248 IDR-
  Days to Ship:	1 Day(s)

• 

  "Air Jet" (1 Nozzle Set)

  TRUSCO NAKAYAMA

  [Features]
  · It is a cooling method that does not use cutting fluid.
  · Cooling air temperature can be lowered up to 31°C below outside temperature.
  · Since no machine is used, there is no breakdown and maintenance is easy.
  · A cooling device for dry processing applying 'Vortex Theory'.
  [Applications]
  · For cooling the blade and workpiece during cutting process.

  • STOCK

  Standard Price:	2,597,949 IDR
  Days to Ship:	1 Day(s)

• 

  Semi-Dry Type Oil Cooler "Magic Cut e-Mist Standard Set"

  FUSOSEIKI

  [Features]
  · Semi-dry type lubrication cooling device.
  · Enables even ultra-small quantities of oil that cannot be seen by the naked eye to be confirmed at the drop speed of the liquid measure checker during lubrication.
  · By controlling the liquid amount, it can be used as needed for semi-dry lubrication or mist lubrication depending on the lubricated item and the application.
  · Mounting onto any apparatus is simple.
  · Particularly ideal for cutting aluminum and stainless steel.
  [Applications]
  · For unmanned oil supply to the conveyor.
  · For cooling, lubrication, and chip removal for drilling machines, tapping machines, lathes, dedicated machines, milling machines, gear cutters, end mills, reamers, die machines, engraving machines, grinders, etc., and in punching, bending, mold gathering, etc.

  Standard Price:	1,826,154 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Replacement Nozzle for Air Jet

  TRUSCO NAKAYAMA

  Replacement nozzle for air jets.
  【Features】
  - Nozzle with excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance and chemical resistance.
  - Operating temperature: -30 to +80°C.
  - Suitable fluids: air, cutting fluid.

  • STOCK

  Standard Price:	387,863 IDR-
  Days to Ship:	Same day or more

• 

  "Coolant Liner" (Hose Kit)【5-7 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.

  • STOCK

  Standard Price:	347,009 IDR-
  Days to Ship:	1 Day(s)

• 

  "Coolant Liner" (2-Piece Set) 【2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.

  • STOCK

  Standard Price:	253,847 IDR-
  Days to Ship:	Same day or more

• 

  Noga, Cool

  NOGA JAPAN

  Spraying equipment with a Loc-line USA 1/4" flexible nozzle attached to a small, powerful NOGA magnet for use with cutting fluid, water-soluble coolant, and other liquids. Easy to set using small magnets, etc.

  Standard Price:	1,209,439 IDR
  Days to Ship:	8 Day(s) or more

• 

  Clamp System (Hose Kit)【1-7 Pieces Per Package】

  NIKKI TRADING

  [Features]
  · The mating between the joints is solid and it maintains orientation extremely well.

  • STOCK

  Standard Price:	462,770 IDR-
  Days to Ship:	1 Day(s)

• 

  magnet base coolant (With Nozzle)

  TRUSCO NAKAYAMA

  [Features]
  · With its powerful 600 N magnet, the coolant piping is very useful for metalworking sites.
  · The flexible fluid nozzle can be used in either liquid or gas.
  · Flow rate can be adjusted by rotating the nozzle tip. (0 to stepless)
  [Applications]
  · For cooling, drying, and cleaning in metal processing.

  Standard Price:	2,026,154 IDR-
  Days to Ship:	12 Day(s) or more

• 

  magnet coolant (With Nozzle)

  TRUSCO NAKAYAMA

  [Features]
  · Powerful magnet enables easy coolant piping.
  · The flexible fluid nozzle can be used in either liquid or gas.
  · Flow rate can be adjusted by rotating the nozzle tip. (0 to stepless)
  [Applications]
  · For cooling, drying, and cleaning in metal processing.

  Standard Price:	2,461,538 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Nozzle for Magnetic Coolant

  TRUSCO NAKAYAMA

  [Features]
  · Replacement nozzle for magnetic coolant and magnet-based coolant.
  · Round blow (R type) with flow adjustment nozzle (from 0, stepless).
  [Applications]
  · For blowing cutting chips in cutting work.

  • STOCK

  Standard Price:	679,659 IDR-
  Days to Ship:	1 Day(s)

• 

  "Air Jet" (Cooling System Main Unit)

  TRUSCO NAKAYAMA

  [Features]
  · Cooling air temperature can be lowered up to 31°C below outside temperature.
  · Since it is air-cooling, cutting fluid is not required.

  • STOCK

  Standard Price:	1,557,606 IDR
  Days to Ship:	1 Day(s)

• 

  "Coolant Liner" (Hose)

  TRUSCO NAKAYAMA

  [Features]
  · Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.

  • STOCK

  Standard Price:	1,368,889 IDR-
  Days to Ship:	1 Day(s)

• 

  Insert Nozzle PM - Liquid Drip Prevention Type

  NABEYA

  10 MPa high pressure type. When the coolant liquid stop switch is pushed, the ejection of the coolant liquid from the nozzle stops instantly. Has a liquid drip prevention structure to shorten the work time. A two-part structure with excellent maintainability.

  Standard Price:	1,146,987 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Mini Cool

  NOGA JAPAN

  [Features]
  · Noga MiniCool applies the Venturi principle to easily spray cutting fluid in air-spray form whenever compressed air is available.
  · Plug the siphon line into the cooling liquid container with the air hose as the air source, then fix the main body to the machine with the magnet before pressing the nozzle against the tool.
  · Pulling the knob and opening the valve causes a strong rush of coolant fluid mist to be sprayed.
  · The air volume can be adjusted with the control valve, and the amount of coolant sprayed can be adjusted with the nozzle

  Standard Price:	2,868,396 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Air Valve for Operation

  FUSOSEIKI

  [Features]
  · Switches on and off the air without power source.
  [Applications]
  · For air operation in accordance with air equipment control or work.

  Standard Price:	1,218,995 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Magnetic Nozzle (for Holding Cutting Fluid)

  TRUSCO NAKAYAMA

  [Features]
  · The powerful 800 N magnet makes it easy to install in any position.
  · The angle and direction of the nozzle are freely adjustable.
  · The additional Rc1/4 screw holes allow two nozzles to be used.
  · Two independent screw holes are available.
  [Applications]
  · For cutting fluid lubrication.

  • STOCK

  Standard Price:	1,423,846 IDR
  Days to Ship:	1 Day(s)

• 

  Silencer for Air Jet

  TRUSCO NAKAYAMA

  [Features]
  · Reduction in ventilation rate is exceedingly low thanks to low resistance.
  · This product is made of a flame-retardant material.

  • STOCK

  Standard Price:	134,017 IDR
  Days to Ship:	1 Day(s)

• 

  "Joint Pliers" (for Coolant Liner)

  TRUSCO NAKAYAMA

  [Features]
  · Material adopts die-cast aluminum and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.
  [Applications]
  · Coolant liner connection.

  • STOCK

  Standard Price:	1,248,718 IDR-
  Days to Ship:	1 Day(s)

• 

  "Coolant Liner" (Connector)【1-10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.

  • STOCK

  Standard Price:	52,820 IDR-
  Days to Ship:	1 Day(s)

• 

  Controller Valve

  NOGA JAPAN

  [Features]
  An optional part for Minicool
  ·Compatible main body: MINICOOL
  Trusco Code: 837-8976

  Standard Price:	827,357 IDR
  Days to Ship:	8 Day(s) or more

• 

  Dual Nozzle Type Magnet

  NOGA JAPAN

  [Features]
  · Includes two 1/4 independent screw holes for mounting an additional nozzle for 2-nozzle use.
  · Can be used for cutting fluid supply.
  · With Powerful 80 kgf On/Off Magnet (DG0036 type)

  Standard Price:	1,506,227 IDR
  Days to Ship:	8 Day(s) or more

• 

  Magnet for Noga Waters Manifold

  NOGA JAPAN

  With three 1/4″ screw holes. Can be used with two cutting fluid supply nozzles (1/4″).

  Standard Price:	761,927 IDR
  Days to Ship:	8 Day(s) or more

• 

  Permanent Magnet

  NOGA JAPAN

  [Features]
  An optional part for Minicool.
  ·Compatible main body: MINICOOL
  ·Pull force: 28 kgf
  Trusco Code: 837-9810

  Standard Price:	529,015 IDR
  Days to Ship:	8 Day(s) or more

• 

  Oil Jetter

  ASAHISEIKOU

  Automatic mist lubrication device using air pressure
  [Features]
  ·cooling effect
  It has a high cooling effect on the cutting edge of the tool during drilling, tapping, and turning, which not only extends tool life but also prevents roughness of the finished surface and improves the machined surface.
  ·economic effect
  With flow-out cooling, a large amount of oil adheres to the cutting chips and is discarded, but by using mist cooling (spray cooling), it is possible to significantly reduce the amount of oil used. In addition, by injecting oil only during work (intermittent injection), wasted oil usage due to worker carelessness can be prevented.

  Standard Price:	21,914,873 IDR-
  Days to Ship:	Quote

• 

  ESCO 320 mm /1 Mouth Coolant Nozzle (Magnet Type)EA991DA-3 320

  ESCO

  【Product Specifications】
  ・Magnet force-32kgf
  ・Operating liquid pressure-0.2 to 0.34MPa
  ・Connection-1/4 NPT
  ・Spray unit length-320mm
  ・Nozzle tip dia.-1/4, 1/8, 1/16 (1 pc each)
  ・Magnet + manifold dim.-41 x 48 x 58(H)mm
  ・Weight-0.46kg
  ・For cutting oil and water-soluble coolant

  Standard Price:	1,516,668 IDR
  Days to Ship:	10 Day(s) or more

• 

  Magnet-Fixed Type Coolant Nozzle EA991E-1

  ESCO

  【Product Specifications】
  ・Connection-R (PT) 1/8
  ・Operating pressure-0 to 0.2MPa
  ・Dim.-Hose length： 225mmSpray unit length： 295mmMagnet base： Dia. 40 x 30(H)mm
  ・Weight-1kg
  ・For cooling machine tools such as electric discharge machine and removing chippings and carbonparticles discharged from them

  Standard Price:	596,057 IDR
  Days to Ship:	11 Day(s) or more

• 

  "Coolant Liner" (Round Nozzle)【1-10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.

  • STOCK

  Standard Price:	34,110 IDR-
  Days to Ship:	Same day or more

• 

  "Coolant Liner" (Flare)【1-10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.

  • STOCK

  Standard Price:	85,813 IDR-
  Days to Ship:	1 Day(s)

• 

  Siphon Line

  NOGA JAPAN

  [Features]
  An optional part for Minicool.
  ·Compatible main body: Minicool/MC3000 (Minicool double nozzle type)
  ·Length: 1 m, 2 m

  Standard Price:	1,130,217 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cool Arm for High Pressure Coolant / Double Flexible

  NOGA JAPAN

  [Features]
  · A revolutionary coolant hose that can supply coolant to parts to be cut in pinpoint at high pressure up to 1,000 Psi (70 bar).
  · The arm position can be adjusted quickly and easily, enabling cutting of higher quality.
  · The tip nozzle comes in three sizes.
  

  Standard Price:	4,027,936 IDR
  Days to Ship:	10 Day(s) or more

• 

  Air Fluid Gun 210 Series (adjustable fluid)

  cejn japan

  Standard Price:	2,136,923 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Snake

  FUSOSEIKI

  [Features]
  · The soft copper piping enables the bent angle to be kept as desired.
  · Rotate the cap at the tip to adjust the flow rate.
  · Can also be used for drip lubrication with liquids.
  [Applications]
  · Water/oil supply nozzle: Cutting fluid supply, fluid supply for grinding discs, washing, water films, dust removal, etc.
  · Air nozzle... automatic duster, tool cooling, chip removal from workpieces, water drain, blowing off small objects during pressing.

  Standard Price:	663,077 IDR
  Days to Ship:	8 Day(s) or more

• 

  Dedicated Assembly Tool for Clamp System

  NIKKI TRADING

  It can be used as a hose for coolant liquids in metalworking machines and as a hose for other fluids, and the angle, length, and diameter can be freely rearranged by combining parts.
  It has excellent chemical resistance, impact resistance, and heat resistance.

  • STOCK

  Standard Price:	932,308 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Point, Fit, Nozzle

  NIKKI TRADING

  [Features]
  · The angle of the spray outlet can be adjusted within a ±35° range.
  · Maintains its orientation better than resin nozzles even with a high flow rate.
  · A metal nozzle that can withstand relatively high hydraulic pressure for circulating the coolant liquid. Even at the maximum inclination angle (35°), the flow rate will not decrease.

  • STOCK

  Standard Price:	500,308 IDR-
  Days to Ship:	1 Day(s)

• 

  Clamp System (Hose)【2 Pieces Per Package】

  NIKKI TRADING

  [Features]
  · The mating between the joints is solid and it maintains orientation extremely well.
  · Features outstanding chemical resistance, heat resistance, and shock resistance.

  • STOCK

  Standard Price:	211,539 IDR-
  Days to Ship:	1 Day(s)

• 

  Clamp System (Nozzle)【4 Pieces Per Package】

  NIKKI TRADING

  [Features]
  · The mating between the joints is solid and it maintains orientation extremely well.
  · Features outstanding chemical resistance, heat resistance, and shock resistance.

  • STOCK

  Standard Price:	176,122 IDR
  Days to Ship:	1 Day(s)

• 

  magnet base coolant (no nozzle)

  TRUSCO NAKAYAMA

  [Features]
  · With its powerful 600 N magnet, the coolant piping is very useful for metalworking sites.
  [Applications]
  · For the piping of coolant nozzles.

  • STOCK

  Standard Price:	1,888,376 IDR-
  Days to Ship:	1 Day(s)

• 

  magnet coolant (no nozzle)

  TRUSCO NAKAYAMA

  [Features]
  · Powerful magnet enables easy coolant piping.
  [Applications]
  · For the piping of coolant nozzles.

  • STOCK

  Standard Price:	1,630,428 IDR-
  Days to Ship:	1 Day(s)

Loading...