(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 9/2/2025 sampai dengan 6:00 pada tanggal 10/2/2025. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 9/2/2025 to 6:00 (WIB) 10/2/2025. We apologize for the inconvenience. - Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Tooling（Page4）
Search by specifying the lower class category
Shrink Fit Holders
Milling Chucks
Milling Cutter Arbors
Collet Holders
Drill Chucks
Tap Holders
Collets
Tooling-Related Equipment
Presetters
Products for Coolants
| Days to Ship |
|
|---|
-
ASAHISEIKOU
Automatic mist lubrication device using air pressure
[Features]
·cooling effect
It has a high cooling effect on the cutting edge of the tool during drilling, tapping, and turning, which not only extends tool life but also prevents roughness of the finished surface and improves the machined surface.
·economic effect
With flow-out cooling, a large amount of oil adheres to the cutting chips and is discarded, but by using mist cooling (spray cooling), it is possible to significantly reduce the amount of oil used. In addition, by injecting oil only during work (intermittent injection), wasted oil usage due to worker carelessness can be prevented.Standard Price: 22,301,539 IDR- Days to Ship: Quote -
Sandvik Coromant Capto Basic Holder
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivityStandard Price: 19,526,154 IDR Days to Ship: Quote -
Pull wrench Tip heat treatment
MANYO TOOLS
[Features]
· Easy and certain pull bolt removal and refitting.
· Wrench does not slip when tightening and removing pull bolts, enabling reliable attachment and detachment.
· Does not fall off even when the wrench is released.
· The tip does not distort thanks to the heat treatment.Standard Price: 1,058,755 IDR- Days to Ship: 11 Day(s) or more -
ESCO
【Product Specifications】
・Temperaturedrop： -40℃
・Operating pressure-0.2 to 0.7MPa
・Supplied compressed air is easily cooled down by up to 40℃ when it is discharged.
・Mounting screw…R (PT) 1/4
・Air consumption…375L/min (When input pressure 0.4MPa)Standard Price: 4,621,923 IDR- Days to Ship: 11 Day(s) or more -
Magnet-Fixed Type Coolant Nozzle EA991E-1
ESCO
【Product Specifications】
・Connection-R (PT) 1/8
・Operating pressure-0 to 0.2MPa
・Dim.-Hose length： 225mmSpray unit length： 295mmMagnet base： Dia. 40 x 30(H)mm
・Weight-1kg
・For cooling machine tools such as electric discharge machine and removing chippings and carbonparticles discharged from themStandard Price: 596,057 IDR Days to Ship: 16 Day(s) or more -
KATO MFG
[Features]
· Short body type that can be used in most machines
· Expansion device for absorbing feed errors
· Short type ideal for use in tight work spacesStandard Price: 8,538,719 IDR Days to Ship: 13 Day(s) or more -
HSK Shank Face Mill Arbor H Type A Type
BIG DAISHOWA SEIKI
[Features]
· A face mill arbor for cutters that support through-tools, reliably supplying coolant air to the cutting edge.Standard Price: 4,115,059 IDR- Days to Ship: 12 Day(s) or more -
Mega Torque Wrench (For Mega Chuck Series)
BIG DAISHOWA SEIKI
[Features]
Mega torque wrench for mega chuck series.
Equipped with torque limiter to protect equipment from machine over load.Standard Price: 5,382,252 IDR- Days to Ship: 10 Day(s) or more -
GIGA SELECTION
[Features]
· Can be mounted to an existing machining center (BT/HSK holder type model with through coolant function)
· Housed in a magazine, is only mounted to the main spindle by ATC when in use, and is removed in the same way
· Head nozzle is variable from 0 to ±110° (stepless and fixed)
· Equipped with a fixed bar inside the machine for varying the nozzle angle, and the angle of the arm can be changed automatically when spindle operation X, Y or Z are used so that the arm makes contact with the fixed bar
· The tip nozzle can swing up to 110° on one side, allowing coolant to also be sprayed on the front side of the spindle
· Directly mounted on the spindle so it turns when the spindle rotates, allowing repeated spraying via the XY axis
· When using a horizontal machining center, chip removal is possible in an orthogonal direction with the nozzle at 90°
· Can be used from the day it is mounted without adding any modifications to the machining center (adjust the nozzle angle manually)
· Aim the coolant spray at flat sections, including the telescopic cover and machine cover inside the machining center, to provide effective machine maintenance
· Can be used for many types of chip shapes if the tip nozzle is replaced with a straight or diffusion nozzle (R1/8)Standard Price: 10,714,858 IDR- Days to Ship: 10 Day(s) or more -
Mitsutomo T-Shape Tap Holder, For 3 To 8 mm Tap Sizes
MITSUTOMO
[Features]
· Use to tap female threads in thin metal plates, etc., or for restoring stripped threads.Standard Price: 190,770 IDR Days to Ship: 12 Day(s) -
SHOWA TOOL
[Features]
· Collet for internal lubrication. Complete sealing up to a high pressure of 7 MPa. Usable with the standard holder and nut. Short slotting collet used to block off coolantStandard Price: 1,796,448 IDR- Days to Ship: 10 Day(s) or more -
Standard Price: 346,333 IDR Days to Ship: 10 Day(s) or more -
Standard Price: 1,176,833 IDR- Days to Ship: Same day or more -
Milling Chuck (Micron Chuck) High Speed Rotation Type
SHOWA TOOL
[Features]
· High-speed rotation type with slim tip, suitable for small-diameter bladed tool use.
· It supports center through (optional).
· Clearance-through available (optional).Standard Price: 4,839,287 IDR- Days to Ship: 10 Day(s) or more -
Drill Chuck (With Integrated Shank)
SHOWA TOOL
Compact integrated shank. Drill chuck that is economical and easy to use.
[Features]
· Compact type with a shorter L dimension than a conventional drill chuck.
· Integrated shank that does not need to be attached or removed.
· The wrench included can be used for tightening during high-torque machining.Standard Price: 3,644,486 IDR- Days to Ship: 10 Day(s) or more -
Standard Price: 331,415 IDR Days to Ship: 10 Day(s) or more -
Standard Price: 5,056,240 IDR- Days to Ship: 8 Day(s) or more -
Reference Position Detection Bar Spring for Replacement of Magic Center
KASAHARA
There are hooks on both ends of the spring, and the spring itself has two hooks.
Standard Price: 260,000 IDR Days to Ship: 8 Day(s) or more -
NIIGATA SEIKI (SK)
Presetter optimal for high-precision X/Y-axis centering bar.
[Applications]
· It can detect the reference position within 2 μm.
· Ideal for determining accurate reference points for general use, NC milling cutter and MC origin positions, etc.
· Lapping finish is applied to working surface, which is the foundation of accuracy.
· Enables positioning by simply placing the probe on the end face of the workpiece.
· Suitable rotation speed: 450 to 600 rpm; over-increasing the rotation speed can cause damage.
[Applications]
· Used as a high-precision X/Y-axis centering bar.Standard Price: 1,163,872 IDR- Days to Ship: 8 Day(s) or more -
NEW STRONG
[Features]
Divider that allows you to easily change angle by simply operating leverStandard Price: 86,108,204 IDR Days to Ship: 8 Day(s) or more -
NEW STRONG
[Features]
· The tip is fully heat treated and can withstand long-term use.
· Since a spring is built into the grip, there is no effort wasted during work.Standard Price: 2,061,000 IDR Days to Ship: 8 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Features]
BU type cartridge unit with a minimum machining diameter of 24 to 60.Standard Price: 2,118,471 IDR- Days to Ship: 8 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Features]
CE Type cartridge unit with a minimum machining diameter of 30 to 70.Standard Price: 2,146,334 IDR- Days to Ship: 8 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Features]
CP Type/CE Type cartridge unit with a minimum machining diameter of 30 to 70.Standard Price: 2,146,334 IDR- Days to Ship: 8 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Features]
P24 Type cartridge unit with a minimum machining diameter of 24 and 38.Standard Price: 1,370,272 IDR Days to Ship: 11 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Features]
A micro unit with a minimum machining diameter of 36 to 73 mm and available in right and left hand.Standard Price: 7,076,444 IDR- Days to Ship: 11 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
SEC series micro unit.
There are 5 types depending on the minimum machining diameter.Standard Price: 63,764 IDR- Days to Ship: 11 Day(s) or more -
Standard Price: 2,456,216 IDR Days to Ship: 12 Day(s) or more -
MANYO TOOLS
[Features]
· Exerts its strength when the arbor is not quite long enough during deep engraving for moldsStandard Price: 3,513,431 IDR- Days to Ship: 12 Day(s) or more -
FMP Plunger Conversion Adapter
MANYO TOOLS
[Features]
·For high feed.
Cutter conversion arbor for reciprocating thrusting.
·It is effective when the length of the arbor is a little short in the processing of deep cutting of molds.
[Detail Type]
·FMP plunge conversion adapterStandard Price: 3,528,678 IDR- Days to Ship: 12 Day(s) or more -
MANYO TOOLS
[Features]
· Dedicated tightening bolts support various thicknesses of metal saws.
· Dedicated thin bolts decrease interference with the tip to increase machining efficiency.Standard Price: 2,625,681 IDR- Days to Ship: 12 Day(s) or more -
ST-SCA Straight Shank Side Cutter Arbor
MANYO TOOLS
Please use it with a milling chuck.
Supports various workpieces with a wide variety of types.Standard Price: 3,889,877 IDR- Days to Ship: 12 Day(s) or more -
MANYO TOOLS
[Features]
·Compatible with MMC millmax milling chuck.
·Minimum order quantity: 1 pc.
·Outer diameter (mm): 20/32/42Standard Price: 1,026,085 IDR- Days to Ship: 12 Day(s) or more -
MANYO TOOLS
[Features]
·Compatible with MMC millmax milling chuck.
[Product Type]
·Compatible chuck: MMC20
·Compatible chuck: MMC25
·Compatible chuck: MMC32
·Compatible chuck: MMC42Standard Price: 345,597 IDR- Days to Ship: 8 Day(s) or more -
Back-up Screw with Coolant Seal Pad
MANYO TOOLS
This is a coolant type adjustment thread part.
Comes with a coolant seal pad.Standard Price: 584,906 IDR Days to Ship: 12 Day(s) or more -
MANYO TOOLS
[Features]
·Coolant type adjustment thread parts
·Type (details): backup screw
·H (mm): 25Standard Price: 396,668 IDR- Days to Ship: 18 Day(s) or more -
Backup Screw for High Pressure Applications
MANYO TOOLS
[Features]
·Coolant type adjustment thread parts
·Type (details): high pressure backup screw
·H (mm): 10Standard Price: 909,986 IDR Days to Ship: 18 Day(s) or more -
MRC Adjustment Screw with Coolant Seal
MANYO TOOLS
[Features]
·Compatible with MRC collet chuck holder
·Minimum order quantity: 1 pc.
[Detail Type]
ScrewStandard Price: 549,422 IDR- Days to Ship: 12 Day(s) or more -
MANYO TOOLS
[Features]
·Compatible with MRC collet chuck holder
·Minimum order quantity: 1 pc.
[Detail Type]
WrenchStandard Price: 646,526 IDR- Days to Ship: 18 Day(s) or more -
Standard Price: 1,018,345 IDR- Days to Ship: 12 Day(s) or more -
MANYO TOOLS
[Features]
· Collet inner diameter has a square hole for resistance to tap slippage.
· Dedicated collet is ideal for high accuracy tapping.Standard Price: 1,957,463 IDR- Days to Ship: 12 Day(s) or more -
Wrench for Small-Diameter Collet Chuck
MANYO TOOLS
[Features]
·Compatible with MRC collet chuck holder.
·Tap that has a square hole in the inner diameter of the collet and is resistant to tap slippage.
Dedicated collet. Suitable for high-precision tapping.
[Minimum Order Quantity]
·E8M: 2 pcs.
·E8MS, E11M, E11MS: 1 pc.Standard Price: 1,018,345 IDR- Days to Ship: 9 Day(s) or more -
ST-MRC F Straight Shank Collet Chuck
MANYO TOOLS
A holder for a lathe or combined processing machine. Ideal for high accuracy drilling and reaming
Standard Price: 2,806,280 IDR- Days to Ship: 12 Day(s) or more -
Center through coolant nut (single piece)
MANYO TOOLS
[Features]
· Use the replacement nut and sealing disc for reliable center-through operationStandard Price: 2,372,841 IDR- Days to Ship: 12 Day(s) or more -
MANYO TOOLS
[Features]
·Usable with MTC ultra long slim chuck holders.
·Standard drills can be used for deep hole drilling, making it possible to reduce costs.
·Outstanding runout of 5 µm or less.
·Easy attachment and removal of blades, without need for expensive dedicated equipment.
Simple structure improves workability.
·End mill types are suitable for mold finishing.Standard Price: 1,542,084 IDR Days to Ship: 22 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Spindle types |
| HSK type |
| Tool Type |
| Retainable blade diameter(mm) |
| Product Category |
| Applicable Manufacturing Machinery (main unit) |
| Chuck Type |
| Holder Length L(mm) |
| Maximum Allowable Rotational Speed(min-1) |
| Coolant System |
| Nozzle Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ASAHISEIKOU | SANDVIK | MANYO TOOLS | ESCO | ESCO | KATO MFG | BIG DAISHOWA SEIKI | BIG DAISHOWA SEIKI | GIGA SELECTION | MITSUTOMO | SHOWA TOOL | SHOWA TOOL | SHOWA TOOL | SHOWA TOOL | SHOWA TOOL | SHOWA TOOL | KASAHARA | KASAHARA | NIIGATA SEIKI (SK) | NEW STRONG | NEW STRONG | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS |
| Product Series | Reference Position Detection Bar Spring for Replacement of Magic Center | ||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | Quote | Quote | 11 Day(s) or more | 11 Day(s) or more | 16 Day(s) or more | 13 Day(s) or more | 12 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 12 Day(s) | 10 Day(s) or more | 10 Day(s) or more | Same day or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 8 Day(s) or more | 12 Day(s) or more | 18 Day(s) or more | 18 Day(s) or more | 12 Day(s) or more | 18 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 9 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 22 Day(s) or more |
| Spindle types | - | - | - | - | - | - | HSK-A | - | BT30 / BT40 / BT50 | - | - | - | - | BT40 | BT40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| HSK type | - | - | - | - | - | - | 63 ～ 100 | - | 40 ～ 100 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tool Type | - | - | - | - | - | Tap | Facemill | - | - | - | end mill / drill / Reamer / Tap | - | drill / Reamer | end mill / drill / Reamer / Tap | drill | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | drill / Reamer | - | - |
| Retainable blade diameter(mm) | - | - | - | - | - | M3 to M16 | - | - | - | - | - | - | - | 4 ～ 12 | 0.5～8 ～ 1 to 13 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Product Category | Heating and Cooling Equipment | Attachments/Accessories | Attachments/Accessories | - | - | Main Body | Main Body | Attachments/Accessories | Attachments/Accessories | - | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Main Body | Main Body | Attachments/Accessories | Measuring equipment | Measuring equipment | Measuring equipment | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories |
| Applicable Manufacturing Machinery (main unit) | - | - | - | - | - | - | - | - | - | - | - | - | - | Machining Centers | Machining Centers | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Chuck Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Holder Length L(mm) | - | - | - | - | - | 93 | - | - | 162.5 ～ 193.5 | - | - | - | 76 ～ 91 | 90 ～ 120 | 85.5 ～ 109.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Allowable Rotational Speed(min-1) | - | - | - | - | - | - | - | - | - | - | - | - | - | 20000 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coolant System | - | - | - | - | - | - | Center Through (Blade Through) | - | - | - | Center Through (Blade Through) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nozzle Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Spindle types
-
HSK type
-
Tool Type
-
Retainable blade diameter(mm)
- 0.25～0.50
- 0.25～ 6
- 0.3~3
- 0.45 ～0.55
- 0.45～3.25
- 0.45～4.05
- 0.45～6.05
- 0.5 to 0.75
- 0.50 to 0.75
- 0.5～5.0
- 0.5～ 6
- 0.5～6.5
- 0.5～7.0
- 0.5 ～ 8
- 0.5～8
- 0.5～ 8
- 0.5–10
- 0.5～10.0
- 0.5～13
- 0.5～13.0
- 0.55 ～0.65
- 0.65 ～0.75
- 0.75 ～0.85
- 0.75～1.0
- 0.75～1.00
- 0.8～6.5
- 0.85 ～0.95
- 0.95 ～1.05
- 1
- 1.0～0.5
- 1.0~1.25
- 1.00～1.25
- 1 to 13
- 1.05 ～1.15
- 1.15 ～1.25
- 1.25 ～1.35
- 1.25～1.5
- 1.25～1.50
- 1.35 ～1.45
- 1.45 ～1.55
- 1.5
- 1.5～1.0
- 1.50～1.75
- 1.5～1.75
- 1.5 to 10
- 1.5 ～10
- 1.55 ～1.65
- 1.65 ～1.75
- 1.75 ～1.85
- 1.75～2.0
- 1.75～2.00
- 1.75～10.0
- 1.85 ～1.95
- 1.95 ～2.05
- 2
- 2.0～1.5
- 2.0～2.25
- 2.00～2.25
- 2.0～10.0
- 2.05 ～2.15
- 2.15 ～2.25
- 2.25 ～2.35
- 2.25～2.5
- 2.25～2.50
- 2.35 ～2.45
- 2.45 ～2.55
- 2.5
- 2.5 to 2.0
- 2.5～2.75
- 2.50～2.75
- 2.5–3.0
- 2.5 ～13
- 2.5～13
- 2.5 to 16
- 2.5 ～16
- 2.5～16.0
- 2.5 ～20
- 2.5～20
- 2.55 ～2.65
- 2.65 ～2.75
- 2.675～3.175
- 2.75 ～2.85
- 2.75～3.0
- 2.75～3.00
- 2.75～3.25
- 2.75～13.0
- 2.85 ～2.95
- 2.9～3.0
- 2.925～3.175
- 2.95 ～3.05
- 2.95～3.05
- 2.95～8.05
- 3
- 3.0～2.5
- 3.00～3.25
- 3~3.5
- 3.0–3.5
- 3–4
- 3–10
- 3 to 12
- 3 to 16
- M3 to M16
- 3~25
- 3.05 ～3.15
- 3.05～3.15
- 3.125～3.225
- 3.15 ～3.25
- 3.15～3.25
- 3.175
- 3.25 ～3.35
- 3.25～3.35
- 3.25～3.50
- 3.25～3.75
- 3.35 ～3.45
- 3.35～3.45
- 3.4~3.5
- 3.40～3.50
- 3.45 ～3.55
- 3.45～3.55
- 3.5
- 3.5～3.0
- 3.50～3.75
- 3.5～4.0
- 3.5～20.0
- 3.55 ～3.65
- 3.55～3.65
- 3.65 ～3.75
- 3.65～3.75
- 3.75 ～3.85
- 3.75～3.85
- 3.75～4.00
- 3.75～4.25
- 3.75～ 4.25
- 3.85 ～3.95
- 3.85～3.95
- 3.9～4.0
- 3.90～4.00
- 3.95 ～4.05
- 3.95～4.05
- 4
- 4.0～3.5
- 4.00～4.25
- 4~4.5
- 4.0–4.5
- 4–5
- 4.05 ～4.15
- 4.05～4.15
- 4.15 ～4.25
- 4.15～4.25
- 4.25 ～4.35
- 4.25～4.35
- 4.25～4.50
- 4.25～4.75
- 4.25～ 4.75
- 4.35 ～4.45
- 4.35～4.45
- 4.4～4.5
- 4.40～4.50
- 4.45 ～4.55
- 4.45～4.55
- 4.5
- 4.5～4.0
- 4.50～4.75
- 4.5–5.0
- 4.55 ～4.65
- 4.55～4.65
- 4.65 ～4.75
- 4.65～4.75
- 4.7125～4.8125
- 4.75 ～4.85
- 4.75～4.85
- 4.75～5.00
- 4.75 to 5.25
- 4.85 ～4.95
- 4.85～4.95
- 4.9~5.0
- 4.90～5.00
- 4.95 ～5.05
- 4.95～5.05
- 5
- 5.0～4.0
- 5.0～4.5
- 5.00～5.25
- 5.0～5.5
- 5～5.5
- 5–6
- 5.0～25.0
- 5.05 ～5.15
- 5.05～5.15
- 5.15 ～5.25
- 5.15～5.25
- 5.25 ～5.35
- 5.25～5.35
- 5.25～5.50
- 5.25～5.75
- 5.35 ～5.45
- 5.35～5.45
- 5.4～5.5
- 5.40～5.50
- 5.45 ～5.55
- 5.45～5.55
- 5.5
- 5.5～5.0
- 5.50～5.75
- 5.5–6.0
- 5.55 ～5.65
- 5.55～5.65
- 5.65 ～5.75
- 5.65～5.75
- 5.75 ～5.85
- 5.75～5.85
- 5.75～6.00
- 5.85 ～5.95
- 5.85～5.95
- 5.9～6.0
- 5.90～6.00
- 5.95 ～6.05
- 5.95～6.05
- 6
- 6.0～5.0
- 6.0～5.5
- 6 to 6.5
- 6.0–6.5
- 6–7
- 6.05～6.15
- 6.15～6.25
- 6.2
- 6.25～6.35
- 6.35～6.45
- 6.4～6.5
- 6.45～6.55
- 6.5
- 6.5～6.0
- 6.5 to 7.0
- 6.55～6.65
- 6.65～6.75
- 6.75～6.85
- 6.85～6.95
- 6.9～7.0
- 6.95～7.05
- 7
- 7.0～6.0
- 7.0～6.5
- 7.0～7.5
- 7～7.5
- 7–8
- 7.05～7.15
- 7.15～7.25
- 7.25～7.35
- 7.35～7.45
- 7.4～7.5
- 7.45～7.55
- 7.5
- 7.5～8.0
- 7.55～7.65
- 7.65～7.75
- 7.75～7.85
- 7.85～7.95
- 7.9～8.0
- 7.95～8.05
- 8
- 8.0～7.0
- 8~8.5
- 8.0～8.5
- 8–9
- 8.4～8.5
- 8.5
- 8.5～9.0
- 8.9～9.0
- 9
- 9.0～8.0
- 9.0～9.5
- 9～9.5
- 9–10
- 9.4～9.5
- 9.5
- 9.5 to 10.0
- 9.9～10.0
- 10
- 10.0～9.0
- 10.0 ～10.5
- 10.0～10.5
- 10～10.5
- 10~11
- 10.4~10.5
- 10.5
- 10.5～11.0
- 10.9～11.0
- 11
- 11.0～10.0
- 11.0～11.5
- 11～11.5
- 11~12
- 11.4～11.5
- 11.5
- 11.5～12.0
- 11.9～12.0
- 12
- 12.0～11.0
- 12.0～12.5
- 12～12.5
- 12~13
- 12.4~12.5
- 12.5
- 12.5～13.0
- 12.9～13.0
- 13
- 13.0～12.0
- 13.0～13.5
- 13～14
- 13.4～13.5
- 13.5
- 13.5～14.0
- 13.9~14.0
- 14
- 14.0～13.0
- 14.0～14.5
- 14~15
- 14.4～14.5
- 14.5
- 14.5～15.0
- 14.9～15.0
- 15
- 15.0～14.0
- 15.0～15.5
- 15~16
- 15.4～15.5
- 15.5
- 15.5～16.0
- 15.9～16.0
- 16
- 16.0～15.0
- 16.0～16.5
- 16～17
- 16.4～16.5
- 16.5
- 16.5～17.0
- 16.9～17.0
- 17
- 17.0～16.0
- 17.0～17.5
- 17～18
- 17.4～17.5
- 17.5
- 17.5～18.0
- 17.9～18.0
- 18
- 18.0～17.0
- 18.0～18.5
- 18~19
- 18.4～18.5
- 18.5
- 18.5～19.0
- 18.9～19.0
- 19
- 19.0～18.0
- 19.0～19.5
- 19～20
- 19.4～19.5
- 19.5
- 19.5～20.0
- 19.9～20.0
- 20
- 20.0～19.0
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 32
- 32.0～31.0
- M36
- 42
- 50
- 80
-
Product Category
-
Applicable Manufacturing Machinery (main unit)
-
Chuck Type
-
Holder Length L(mm)
- 15.5
- 16
- 16.5
- 19.5
- 20
- 24.5
- 25
- 26.5
- 29
- 30
- 33
- 34
- 35
- 39
- 40
- 44
- 45
- 47
- 50
- 50.5
- 52
- 54
- 55
- 60
- 62
- 62.5
- 64.5
- 68.5
- 68.6
- 70
- 73
- 75
- 76
- 80
- 81
- 84.5
- 85
- 85.5
- 90
- 90.5
- 91
- 93
- 94
- 95/135/165
- 96
- 97.5
- 100
- 100/140/170
- 104
- 105
- 105/145/175
- 108
- 109.5
- 110
- 115
- 120
- 120/160/190
- 122
- 125
- 125/175/205
- 130
- 130/180/210
- 131.5
- 132
- 135
- 140
- 140/190/220
- 142
- 145/195/225
- 150
- 155
- 160
- 162.5
- 164.5
- 165
- 169
- 176.5
- 180.5
- 182.5
- 185
- 186.5
- 193.5
- 195
- 200
- 220
-
Maximum Allowable Rotational Speed(min-1)
-
Coolant System
-
Nozzle Type
Narrow search by specifying Manufacturer
-
- BIG DAISHOWA SEIKI (107)
- TRUSCO NAKAYAMA (63)
- YUKIWA SEIKO (61)
- ESCO (40)
- MANYO TOOLS (35)
- TAKURA KOGU (22)
- NIKKENKOSAKU (18)
- KATO MFG (14)
- SHOWA TOOL (13)
- NOGA JAPAN (11)
- SUMITOMO ELECTRIC HARDMETAL (10)
- SANDVIK (7)
- FUSOSEIKI (5)
- NIIGATA SEIKI (SK) (5)
- NIKKI TRADING (5)
- THE CUT (5)
- KYORITSU SEIKI (4)
- KASAHARA (3)
- VERTEX (3)
- FUJI TOOL (2)
- MITSUTOMO (2)
- NEW STRONG (2)
- VESSEL (2)
- ASAHISEIKOU (1)
- ALBRECHT (1)
- GIGA SELECTION (1)
- BLUEBIRD (1)
- BOSCH (1)
- cejn japan (1)
- DREMEL (1)
- ISCAR (1)
- KOBAYASHI IRON WORKS (1)
- MAKITA (1)
- MINITOR (1)
- MAPAL (1)
- NABEYA (1)
- NISSIN SANGYO (1)
- NT TOOL (1)
- SHINWASOKUTEI (1)
- SYIC (1)
- TOHIN SHOJI (1)
CAD
-
- 2D
- 3D
Related Categories to Tooling
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy