Chamfer, V-Grooves（work material：general steel）

• 

  Leading Drill VP-LDS

  OSG

  V coating enables longer service life compared to TIN-NC-LDS

  Standard Price:	332,590 IDR-
  Days to Ship:	8 Day(s) or more

• 

  XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type

  MISUMI

  [Features]
  ・The popular high hardness steel chamfer end mill is even more affordable.
  ・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)
  ・High-efficiency machining is possible by adopting a 6-flute shape.
  ・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
  ・The finish of the surface roughness of the workpiece after machining is very good.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	754,464 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Leading Drill TIN-NC-LDS

  OSG

  TiN coating enables higher speed and longer service life compared to NC-LDS

  Standard Price:	252,109 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Carbide inner R-cutter, 2-flute

  MISUMI

  Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes

  • Volume Discount

  • Non-Coated
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Standard Price:	725,113 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Leading Drill Standard NC-LDS

  OSG

  Tip angles are available in 90° (45° chamfer), 120° and 130° (EX-Gold drill centering for inclined/curved surfaces).

  Standard Price:	151,955 IDR-
  Days to Ship:	1 Day(s) or more

• 

  SV Spiral Chamfer Cutter

  UNION TOOL

  [Features]
  · Carbide spiral chamfering cutter
  · Half Taper Angle of 45°
  · The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.

  Standard Price:	1,195,559 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Corner Rounding End Mill

  FUKUDA

  End mill for R chamfering.
  [Features]
  ·The use of a straight blade makes it easy to re-grind and has excellent cost performance.
  ·The shank diameter is designed to be thick, making it rigid.
  ·A rich lineup from R0.5 to 30.
  [Applications]
  ·Ideal for R chamfering.

  • STOCK

  Standard Price:	1,063,087 IDR-
  Days to Ship:	1 Day(s) or more

• 

  CC, Center for Chamfering

  SANKO MFG

  Center chamfering cutter used in a large variety of different applications.
  
  [Features]
  · As the outer diameter and shank have the same diameter, interference with the workpiece can be avoided.
  · Used in a large variety of different applications.

  Standard Price:	625,103 IDR-
  Days to Ship:	10 Day(s) or more

• 

  WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P

  OSG

  [Features]
  · A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
  The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
  Significantly reduces turning-back, or burring.
  Excellent chip discharge.

  Standard Price:	1,704,639 IDR-
  Days to Ship:	8 Day(s) or more

• 

  TS coated carbide chamfer, V grooving end mill, 2-flute

  MISUMI

  [Features]
  ·Ideal for chamfering and V-groove
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Standard Price:	818,670 IDR-
  Days to Ship:	8 Day(s) or more

• 

  TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

  MISUMI

  Ideal for the Deep Chamfering of Workpieces

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Standard Price:	946,536 IDR-
  Days to Ship:	8 Day(s) or more

• 

  TS coated carbide chamfering end mill, 2-flute / 15° spiral

  MISUMI

  [Features]
  ·With the flute tip hard to chip and shape that facilitates cutting chip discharge, processing from positioning ( = centering) to chamfering is possible with a single tool
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Standard Price:	1,017,379 IDR-
  Days to Ship:	8 Day(s) or more

• 

  TS coated carbide chamfering end mill, 2-flute / short model

  MISUMI

  [Features]
  ·Ideal for chamfering. Can also be used as a deburring tool
  ·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting
  ·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Standard Price:	752,158 IDR-
  Days to Ship:	8 Day(s) or more

• 

  TS coated carbide chamfering end mill, 3-flute / short model

  MISUMI

  [Features]
  ·Ideal for chamfering (V-groove is not possible as there is no cutting flute on the tip).
  ·Peripheral flutes enable inclined, contour and helical cutting
  ·The 3-flute shape enables the feed rate to be improved up to 1.5 times that of the 2-flute type
  ·With helix angle on the peripheral flutes
  ·Can also be used as a deburring tool
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Standard Price:	902,589 IDR-
  Days to Ship:	8 Day(s) or more

• 

  TS coated carbide inner R-cutter, 2-flute

  MISUMI

  [Features]
  ·Easy high-quality processing of corner radius
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  CAD ：

  2D / 3D

  Standard Price:	561,370 IDR-
  Days to Ship:	8 Day(s) or more

• 

  TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

  MISUMI

  The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

  • Volume Discount

  • TS
  • SUS
  • 2 Flutes

  CAD ：

  2D / 3D

  Standard Price:	941,465 IDR-
  Days to Ship:	8 Day(s) or more

• 

  TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

  MISUMI

  The chamfer angle can be selected from 60, 90 and 120°according to the machining style

  • Volume Discount

  • TiCN
  • 2 Flutes
  • S (Short)

  CAD ：

  2D / 3D

  Standard Price:	635,043 IDR-
  Days to Ship:	Same day or more

• 

  High-Speed Steel Chamfering End Mill, 2-Flute / Short

  MISUMI

  Chamfering end mill with the angle that can be freely selected in 1° increments

  • Non-Coated
  • 2 Flutes
  • S (Short)

  Days to Ship:	10 Day(s) or more

• 

  XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type

  MISUMI

  [Features]
  ・MISUMI's original inner radius cutter specialized for machining high hardness steel.
  ・Ideal for high hardness steel inner radius machining up to 65 HRC.
  ・High-efficiency machining is possible by adopting a 4-flute shape.
  ・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
  ・The finish of the surface roughness of the workpiece after machining is very good.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	819,000 IDR-
  Days to Ship:	8 Day(s) or more

• 

  XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

  MISUMI

  [Features]
  ・Popular 3-flute type for helix angle chambering with high feed rate.
  ・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
  ・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
  ・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
  ・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
  ・It can also be used as a deburring tool.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	737,561 IDR-
  Days to Ship:	8 Day(s) or more

• 

  XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

  MISUMI

  [Features]
  ・Machining from positioning to chamfering with a single tool.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	925,255 IDR-
  Days to Ship:	8 Day(s) or more

• 

  XAL Series Carbide Chamfer End Mill 2-Flute

  MISUMI

  [Features]
  ・Recommended for chamfering general steel.
  ・Ideal for chamfering and V-groove machining.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	574,683 IDR-
  Days to Ship:	8 Day(s) or more

• 

  XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

  MISUMI

  [Features]
  ・Recommended for deep section chamfering of general steel.
  ・Ideal for chamfering and V-groove machining.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
  ・The long type is ideal for deep cavity milling.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	774,439 IDR-
  Days to Ship:	8 Day(s) or more

• 

  XAL Series Carbide Inner Radius Cutter, 2-Flute

  MISUMI

  [Features]
  ・An essential item for corner rounding.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	571,610 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS

  OSG

  90° of the tip angle with FX coating, carbide leading drill long shank type. Ideal for chamfering deep parts.

  Standard Price:	7,313,688 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Leading Drill, Carbide FX Coating FX-LDS

  OSG

  90° of the tip angle with FX coating, carbide leading drill. It enables high speed and long lifespan.

  Standard Price:	5,650,652 IDR-
  Days to Ship:	8 Day(s) or more

• 

  3-flute Chamfering Cutter (negative type) HSCT-N

  OSG

  End mill for negative type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Standard Price:	1,290,669 IDR-
  Days to Ship:	8 Day(s) or more

• 

  3-flute Chamfering Cutter (positive type) HSCT-P

  OSG

  End mill for positive type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Standard Price:	1,290,669 IDR-
  Days to Ship:	8 Day(s) or more

• 

  3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N

  OSG

  Negative type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Standard Price:	1,382,907 IDR-
  Days to Ship:	8 Day(s) or more

• 

  3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P

  OSG

  Positive type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.

  Standard Price:	1,382,907 IDR-
  Days to Ship:	8 Day(s) or more

• 

  End Mill Chamfer Cutter CE□□

  MITSUBISHI HITACHI TOOL

  The base material is cobalt high-speed steel.
  Work Material, General Steel/Stainless Steel/Aluminum/Titanium
  Single-edge blade
  With or without peripheral edge: with edge
  Tool grade, High-speed steel
  Tip angle (θ) 90

  Standard Price:	6,920,000 IDR
  Days to Ship:	8 Day(s) or more

• 

  VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter

  OSG

  Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.

  Standard Price:	881,593 IDR-
  Days to Ship:	8 Day(s) or more

• 

  VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank

  OSG

  Leading drill long shank type, using powder metal high-speed steel XPM as the base material, with 90° of the V coated tip angle. Ideal for chamfering deep parts.

  Standard Price:	417,859 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Carbide Solid Chamfering Endmill 3-Flute

  DIXI

  High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.

  Standard Price:	770,663 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Chatterless chamfer milling machine

  FUKUDA

  6-flute blade improves cutting force, fantastic sharpness means zero chatter, horizontal motion during face milling is possible, and the uncomfortable metallic sound during machining is drastically reduced.
  
  [Features]
  · Chamfering.
  · Drilling machines, milling machines, machining centers.
  · Horizontal Milling

  Standard Price:	363,317 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Center reamer (taper shank)

  FUKUDA

  A reamer used for finishing and chamfering center holes. The odd number of blades reduces chatter.

  Standard Price:	3,178,269 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Carbide Mini WR Chamfer Cutter

  EIKOSHA

  Carbide mini WR chamfering cutter capable of R chamfering on the top and bottom surfaces.
  [Features]
  ·Abrasion resistance is achieved by adopting TIAlN coating.
  ·Back and surface R chamfering.
  [Applications]
  ·R chamfering on the front and R chamfering on the back can be processed with this single tool.

  Standard Price:	3,093,333 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Carbide Mini WR Chamfer Cutter, Long

  EIKOSHA

  Back and front are rounded. Long handle

  Standard Price:	4,053,333 IDR-
  Days to Ship:	8 Day(s) or more

• 

  New Chamfering Cutter

  EIKOSHA

  Chamfering New chamfering milling cutter with 1 flute.
  [Features]
  ·Can be re-polished.
  ·A shape that does not chatter when chamfering.

  Standard Price:	1,554,510 IDR
  Days to Ship:	8 Day(s) or more

• • On Sale Till 31/03/2025

  

  Center reamer

  FUKUDA

  A cutting tool used for finishing the center hole and chamfering.
  [Features]
  ·Because it is designed with an odd number of flutes, machining with little chatter is possible.
  ·A rich lineup of 60°, 90° and 120°.
  [Applications]
  ·Ideal for finishing center holes, as well as chamfering corners.

  Standard Price:	280,493 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  SAGCCC AS Coated Carbide Center for Chamfering

  SANKO MFG

  Center chamfering cutter with TiAlN coating. Double angle adopted for the chamfer part.

  Standard Price:	1,370,407 IDR-
  Days to Ship:	10 Day(s) or more

• 

  GCCC, Carbide Center for Chamfering

  SANKO MFG

  [Features]
  · Melding the design concepts of endmills and drills, it is available for a wide range of applications.
  · Double angle adopted for the chamfer part.
  · Provides a clean finish with fewer burrs.

  Standard Price:	1,101,149 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Toglon Sharp SP 60° Carbide

  IWATA TOOL

  Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

  Standard Price:	1,214,000 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Toglon Sharp SP 90° Carbide

  IWATA TOOL

  [Features]
  · Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
  · Finish is the same quality, brilliant surface roughness.

  Standard Price:	898,333 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Toglon Sharp SP 90° Carbide Long Type

  IWATA TOOL

  [Features]
  · Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
  · Finish is the same quality, brilliant surface roughness.

  Standard Price:	1,214,000 IDR-
  Days to Ship:	8 Day(s) or more

Loading...