(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Point Taps（Screw size (Nominal)：M5）

An online store for point taps. In MISUMI's e-catalog (online general catalog), specifications/dimensions of nominal, pitch, screw type, delivery date, etc. can be selected with one click, so you can easily find the desired point tap. Point taps are available for a wide range of applications, such as for hard-to-cut materials, deep holes, or thin plates.

[What is a point tap?]
It is a groove-shaped cutting tap that discharges chips in the tap traveling direction, and is ideal for machining "through holes". It is characterized by low cutting torque as there are few obstacles to the chips. There are two types of materials, mainly HSS (= high speed steel) and carbide: HSS is tough and hard to break and carbide is abrasion resistant.

41 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 15 Day(s) or Less

Spiral Pointed Taps_PO

YAMAWA MFG

A point tap convenient for through-hole machining as scraps are ejected forward.
[Features]
· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.
· Minimal scrap issues.
· Low cutting torque.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining through-holes.
* N-PO models will transition to PO as soon as stock runs out.

Standard Price:	185,286 IDR-
Days to Ship:	12 Day(s)

Model A Tap Series, Pointed Tap A-POT

OSG

Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.

Standard Price:	286,536 IDR-
Days to Ship:	8 Day(s) or more

Pointed Tap Series, General Purpose EX-POT

OSG

For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way

STOCK

Standard Price:	116,100 IDR-
Days to Ship:	1 Day(s) or more

Pointed Tap Series TiN Coating TIN-POT

OSG

Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

Standard Price:	258,346 IDR
Days to Ship:	8 Day(s) or more

On Sale Till 31/03/2025

Spiral Pointed Taps for Stainless Steels_SU+PO

YAMAWA MFG

Point tap for through-hole machining with extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.

Standard Price:	157,457 IDR-
	Special Price
Days to Ship:	Same day or more

Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO

YAMAWA MFG

Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.

Standard Price:	179,500 IDR
Days to Ship:	10 Day(s) or more

High-Speed Steel Point Tap

High-Speed Steel Point Tap【10 Pieces Per Package】

MISUMI

[Features]
·High-speed steel uncoated spiral point tap
·Can be used for through hole machining
·Effective for work materials with continuous cutting chip such as carbon steel and steel alloy

Volume Discount

Standard Price:	655,204 IDR
Days to Ship:	8 Day(s) or more

Pointed Tap for Stainless Steel use EX-SUS-POT

OSG

Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

Standard Price:	134,100 IDR-
Days to Ship:	2 Day(s)

Pointed Tap for General Application (with OX)_EX-H-POT

OSG

For standard point taps, it is used when the protruding length of the screw is insufficient.

STOCK

Standard Price:	94,000 IDR-
Days to Ship:	2 Day(s)

LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT

OSG

Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

Standard Price:	534,135 IDR-
Days to Ship:	8 Day(s) or more

Pointed Tap for Difficult-To-Cut Materials CPM-POT

OSG

The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

Standard Price:	153,538 IDR
Days to Ship:	2 Day(s)

Carbide Taps for Hard Materials_EH-CT

YAMAWA MFG

Ideal for tapping of high-hardness steel of 45 to 55 HRC, such as steel for hot-rolled dies (SKS3, SKD11, etc.). We recommend using the maximum value 6H female thread bore for the pilot hole diameter.

Standard Price:	1,442,385 IDR
Days to Ship:	8 Day(s) or more

Spiral Pointed Taps for High Carbon Steels_HC+PO

YAMAWA MFG

It is suitable for tapping high carbon steel such as S55C.

Standard Price:	164,285 IDR
Days to Ship:	10 Day(s) or more

Short Spiral Pointed Taps for Deep Hole Use_S-PO

YAMAWA MFG

A tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Short thread length gives low frictional resistance.
· Good supply of cutting oil is effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.

Standard Price:	214,429 IDR
Days to Ship:	12 Day(s)

Carbide taps for ultra hard materials_UH-CT

YAMAWA MFG

[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.

Standard Price:	1,379,217 IDR
Days to Ship:	10 Day(s) or more

N Point Tap Long Shank

NACHI(FUJIKOSHI)

[Features]
・ Used when the protrusion length is insufficient with standard size.

Standard Price:	284,458 IDR-
Days to Ship:	8 Day(s) or more

Long Shank Short Spiral Pointed Taps for Stainless Steels_LS-SU-S-PO

YAMAWA MFG

[Features]
· A long-shank point tap for machining through holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.
· Can also be used for deep tapping operations.

Standard Price:	806,154 IDR-
Days to Ship:	12 Day(s) or more

TiN Coated High-Speed Steel Point Tap

TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】

MISUMI

[Features]
·Can be used for through hole machining
·It can handle a wide range of work materials, but is especially effective for tapping steel alloy and stainless steel, etc.
·Excellent abrasion resistance and chip-weld resistance due to TiN coating
·Long shank type ideal for drilling deep thread holes (G-LS-POT)

Volume Discount

Standard Price:	180,856 IDR-
Days to Ship:	8 Day(s) or more

MT Series High-Speed Steel Point Tap

MISUMI

[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.

Volume Discount

Standard Price:	108,175 IDR
Days to Ship:	8 Day(s) or more

HR Coated Pointed Tap for Nickel Alloy_WHR-NI-POT

OSG

The application of an HR coating with a high melt sticking resistance to nickel-base alloys achieves a long life even on age hardened nickel-base alloys (40 to 45 HRC)

Standard Price:	533,907 IDR
Days to Ship:	15 Day(s)

Pointed Tap TiN coated with Long Shank_TIN-LT-POT

OSG

Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

Standard Price:	445,446 IDR
Days to Ship:	8 Day(s) or more

LH Spiral SYNCHRO Tap for Aluminum_HS-AL-RFT

OSG

Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision female threading of aluminum and aluminum alloy.

Standard Price:	207,195 IDR
Days to Ship:	8 Day(s) or more

Pointed Tap for Stainless Steels with Long Shank_EX-LT-SUS-POT

OSG

With excellent sharpness and durability, it is used for stainless steel through holes where poor machinability is a problem.

Standard Price:	298,163 IDR
Days to Ship:	8 Day(s) or more

LH Spiral SYNCHRO Tap_HS-RFT

OSG

Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

Standard Price:	345,722 IDR
Days to Ship:	8 Day(s) or more

LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT

OSG

Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

Standard Price:	419,822 IDR
Days to Ship:	8 Day(s) or more

Pointed Tap for Deep Holes EX-DH-POT

OSG

Particularly suitable for workpieces which are easily scorched because the screw tapping length is particularly long.

Standard Price:	134,100 IDR
Days to Ship:	2 Day(s)

Pointed Tap for Thin Plate EX-SS-POT

OSG

Ideal for tapping soft steel thin plates (through holes) with a tensile strength of 700 N/mm² or less. A beautiful finished surface is obtained as the generation of punch hole and bearing hole whiskers, flashes, or chipping can be kept to a minimum

STOCK

Standard Price:	134,100 IDR
Days to Ship:	2 Day(s)

Point Tap (for Metric Screws)

TRUSCO NAKAYAMA

[Features]
· High-speed tapping is possible.
· Oxidization treated.
[Applications]
· For through hole finish work.
· Work materials: General steel, low-medium carbon steel, alloy steel.

STOCK

Standard Price:	126,308 IDR
Days to Ship:	1 Day(s)

Cobalt jet tap

ISHIHASHI

High molybdenum content for toughness, with superior high hardness, heat resistance, and wear resistance.

STOCK

Standard Price:	234,462 IDR
Days to Ship:	1 Day(s)

Jet tap

ISHIHASHI

Since the core thickness of the tap is large, it has strong torsion, and there is almost no damage.

STOCK

Standard Price:	162,154 IDR
Days to Ship:	1 Day(s)

Long neck jet tap

ISHIHASHI

Long-neck tap for drilling through holes

Standard Price:	352,078 IDR
Days to Ship:	8 Day(s) or more

Spiral Pointed Taps for Left Hand Threads_PO-V

YAMAWA MFG

Coated point tap suitable for low carbon steel to high carbon steel machining.
[Features]
· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.
[Applications]
· Can process both synchronously and asynchronously.
· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).

Standard Price:	278,322 IDR
Days to Ship:	8 Day(s) or more

Spiral Pointed Taps for Nickel Base Alloys_ZEN-P

YAMAWA MFG

A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

Standard Price:	370,143 IDR
Days to Ship:	12 Day(s)

Plus Series Spiral Pointed Taps_+PO

YAMAWA MFG

A point tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).

Standard Price:	199,538 IDR
Days to Ship:	1 Day(s)

Long Shank Spiral Pointed Taps, Coated_LS-PO-V

YAMAWA MFG

* LS-N-PO-V will switch to LS-PO-V as soon as the stock runs out.

Standard Price:	460,833 IDR
Days to Ship:	10 Day(s) or more

Spiral Pointed Carbide Taps_N-CT-PO

YAMAWA MFG

Carbide point tap ideal for mass-production screw machining of aluminum casting (AC), aluminum die-casting (ADC), zinc die-casting (ZDC), etc.

Standard Price:	1,833,253 IDR
Days to Ship:	10 Day(s) or more

General Application(with OX)_EX-LT-H-POT

OSG

[Specifications]
· Shape: Point tap
· Screw type: metric
· Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / High Carbon Steel (over 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Cast Steel (SC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, etc.) [○]

Standard Price:	275,364 IDR
Days to Ship:	8 Day(s) or more

Pointed Tap Series Ultra Synchro Tap US-AL-RFT

OSG

[Specifications]
· Shape: Point tap
· Screw type: metric
· Work Material: Copper (Cu) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [◎] / Zinc Alloy Casting (ZDC) [◎]

Standard Price:	441,798 IDR
Days to Ship:	15 Day(s)

Spiral Pointed Tap with Long Shank_A-LT-POT

OSG

Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.

Standard Price:	450,234 IDR-
Days to Ship:	8 Day(s) or more

SG Point Tap SGPO

NACHI(FUJIKOSHI)

[Features]
・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.

Standard Price:	268,663 IDR-
Days to Ship:	8 Day(s) or more

Spiral Pointed Taps for General Purpose_IPO

YAMAWA MFG

[Features]
· Through-hole tap for low speed machining with a drilling machine.
· Use for machining iron products (SPC, SS400, etc.) that are commonly available.
· Has a surface treatment (oxide treated) that is ideal for machining iron.
· Machines small amounts of female threads for product prototypes.
· The biting part has a twisted groove to discharge scrap in the same direction as bit movement, for use with through holes.

Standard Price:	121,846 IDR
Days to Ship:	1 Day(s)


Brand
Product Series
Days to Ship
Specifications
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

					On Sale Till 31/03/2025
Brand	YAMAWA MFG	OSG	OSG	OSG	YAMAWA MFG	YAMAWA MFG	MISUMI	OSG	OSG	OSG	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	NACHI(FUJIKOSHI)	YAMAWA MFG	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	TRUSCO NAKAYAMA	ISHIHASHI	ISHIHASHI	ISHIHASHI	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	OSG	OSG	NACHI(FUJIKOSHI)	YAMAWA MFG
Product Series	Spiral Pointed Taps_PO	Model A Tap Series, Pointed Tap A-POT	Pointed Tap Series, General Purpose EX-POT	Pointed Tap Series TiN Coating TIN-POT	Spiral Pointed Taps for Stainless Steels_SU+PO	Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO	High-Speed Steel Point Tap【10 Pieces Per Package】	Pointed Tap for Stainless Steel use EX-SUS-POT	Pointed Tap for General Application (with OX)_EX-H-POT	LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT	Pointed Tap for Difficult-To-Cut Materials CPM-POT	Carbide Taps for Hard Materials_EH-CT	Spiral Pointed Taps for High Carbon Steels_HC+PO	Short Spiral Pointed Taps for Deep Hole Use_S-PO	Carbide taps for ultra hard materials_UH-CT	N Point Tap Long Shank	Long Shank Short Spiral Pointed Taps for Stainless Steels_LS-SU-S-PO	TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】	MT Series High-Speed Steel Point Tap	HR Coated Pointed Tap for Nickel Alloy_WHR-NI-POT	Pointed Tap TiN coated with Long Shank_TIN-LT-POT	LH Spiral SYNCHRO Tap for Aluminum_HS-AL-RFT	Pointed Tap for Stainless Steels with Long Shank_EX-LT-SUS-POT	LH Spiral SYNCHRO Tap_HS-RFT	LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT	Pointed Tap for Deep Holes EX-DH-POT	Pointed Tap for Thin Plate EX-SS-POT	Point Tap (for Metric Screws)	Cobalt jet tap	Jet tap	Long neck jet tap	Spiral Pointed Taps for Left Hand Threads_PO-V	Spiral Pointed Taps for Nickel Base Alloys_ZEN-P	Plus Series Spiral Pointed Taps_+PO	Long Shank Spiral Pointed Taps, Coated_LS-PO-V	Spiral Pointed Carbide Taps_N-CT-PO	General Application(with OX)_EX-LT-H-POT	Pointed Tap Series Ultra Synchro Tap US-AL-RFT	Spiral Pointed Tap with Long Shank_A-LT-POT	SG Point Tap SGPO	Spiral Pointed Taps for General Purpose_IPO
Days to Ship	12 Day(s)	8 Day(s) or more	1 Day(s) or more	8 Day(s) or more	Same day or more	10 Day(s) or more	8 Day(s) or more	2 Day(s)	2 Day(s)	8 Day(s) or more	2 Day(s)	8 Day(s) or more	10 Day(s) or more	12 Day(s)	10 Day(s) or more	8 Day(s) or more	12 Day(s) or more	8 Day(s) or more	8 Day(s) or more	15 Day(s)	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	2 Day(s)	2 Day(s)	1 Day(s)	1 Day(s)	1 Day(s)	8 Day(s) or more	8 Day(s) or more	12 Day(s)	1 Day(s)	10 Day(s) or more	10 Day(s) or more	8 Day(s) or more	15 Day(s)	8 Day(s) or more	8 Day(s) or more	1 Day(s)
Specifications			STOCK						STOCK																		STOCK	STOCK	STOCK	STOCK
Screw size (Nominal)	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5	M5
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Copper (Cu)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Quenched and tempered steel (45 to 55 HRC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○]	High Hardness Steel (50-60 HRC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Nickel-based alloy (Inconel, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless steel (SUS)[○] / Copper (Cu)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	-	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]
Pitch (P), Number of Threading(mm)	0.5 ～ 0.8	0.5 ～ 0.8	0.8 ～ 0.9	0.8	0.8 ～ 0.9	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.5 ～ 0.8	0.5 ～ 0.8	0.8
Tool Material Type	High-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	Cobalt HSS	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Carbide	High-speed steel	High-speed steel	Carbide	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Cobalt HSS	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Cobalt HSS	-	-	High-speed steel	Powder high-speed steel	High-speed steel	High-speed steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	High-speed steel	High-speed steel
Tap Type	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap
Hole type	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole / For blind hole	For through hole	For through hole	For through hole / For blind hole	For through hole	For through hole	For through hole	For through hole	For blind hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	-	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole
Chamfer threads (Lcf)	5P	5P	5P	5P	5P	4.5P	5P	4P	5P	6P	5P	5P	5P	5P	5P	5	4.5P	5P	5P	5P	5P	6P	4P	6P	5P	4P	5P	5P	-	-	-	5P	4.5P	5P	5P	5P	5P	6P	5P	5	5P
Coating Type	-	Other	Non-Coated	TiN	-	-	-	Non-Coated	Non-Coated	TiN	Non-Coated	TiAlN	-	-	TiAlN	-	Other	TiN	Non-Coated	Other	TiN	Non-Coated	Non-Coated	TiN	TiN	Non-Coated	Non-Coated	-	Non-Coated	Other	Other	TiN	-	-	TiN	-	Non-Coated	Other	Other	TiCN	Other
Coating Y/N	NA	Available	NA	Available	NA	NA	NA	NA	NA	Available	NA	Available	NA	NA	Available	NA	Available	Available	NA	Available	Available	NA	NA	Available	Available	NA	NA	-	NA	Available	Available	Available	NA	NA	Available	NA	NA	Available	Available	Available	Available
Overall Length (L)(mm)	60	60	60	60	60	60	60	60	60	100 ～ 150	60	60	60	60	60	150	100 ～ 150	60 ～ 100	60	60	100	60	100	60	60	60	60	60	60	60	100	60	60	60	100	60	100	60	100 ～ 150	60	60

Configure

Specification/Dimensions

Screw size (Nominal)
No.10

No.10UN

No.10-32UNF

No.10-24UNC

No.2

No.4

No.4-40UNC

No.5

No.5UN

No.5-40UNC

No.6

No.6-32UNC

No.8

No.8UN

No.8UNJ

No.8-32UNC

1/2

1/2UN

1/2UNJ

1/2-20UNF

1/2-13UNC

1/4

1/4UN

1/4UNJ

W1/4

1/4-28UNF

1/4-20UNC

SM1/8

W1/8

M1.4

M1.6

M1.7

M1.8

M2

M2.0

M2.2

M2.3

M2.5

M2.6

M3

M3.0

3/4

3/4UN

W3/4

3/4-16UNF

3/4-10UNC

3/8

3/8-UNJ

3/8UN

3/8-24UNF

3/8-16UNC

3/16

W3/16

M3.5

M4

M4.0

M4.5

M5

M5.0

5/8

5/8UN

5/8-18UNF

5/8-11UNC

5/16

5/16UN

5/16UNJ

W5/16

5/16-24UNF

5/16-18UNC

M5.5

M6

M6.0

M7

7/8-14UNF

7/8-9UNC

7/16

7/16UN

7/16UNJ

7/16-20UNF

7/16-14UNC

M8

M9

9/16

9/16UN

9/16-18UNF

9/16-12UNC

M10

M11

M12

M14

M15

M16

M17

M18

M20

M22

M24

M27

M28

M30

M33

M36

M39

M42
Clear

Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Pitch (P), Number of Threading(mm)
0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.25

1.5

1.75

2

2.5

3

3.5

4

4.5

10

11

12

13

14

16

18

20

24

28

32

36

40

44

48

56
Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Vanadium High-Speed Steel
Details

Clear

Tap Type
- Point tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Chamfer threads (Lcf)
2.5P

4P

4.5P

5

5P

6P

24P
Drawing

Clear

Coating Type
- TiAlN
- TiCN
- TiN
- Non-Coated
- Other
Details

Clear

Coating Y/N
- Available
- NA
Clear

Overall Length (L)(mm)
34

36

40

42

44

46

48

52

55

60

61

62

65

70

72

75

80

82

85

88

90

95

100

105

110

115

120

130

135

140

145

150

155

165

175

200
Drawing

Clear

Narrow search by specifying Manufacturer

- MISUMI (3)
- Economy series (0)
- OSG (18)
- YAMAWA MFG (14)
- ISHIHASHI (3)
- NACHI(FUJIKOSHI) (2)
- TRUSCO NAKAYAMA (1)
- GUHRING (0)
- SANDVIK (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Point Taps

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Point Taps（Screw size (Nominal)：M5）

Configure

Specification/Dimensions

Screw size (Nominal)

Screw Types

work material

Pitch (P), Number of Threading(mm)

Tool Material Type

Tap Type

Hole type

Chamfer threads (Lcf)

Coating Type

Coating Y/N

Overall Length (L)(mm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Point Taps

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Point Taps（Screw size (Nominal)：M5）

Configure

Specification/Dimensions

Screw size (Nominal)

Screw Types

work material

Pitch (P), Number of Threading(mm)

Tool Material Type

Tap Type

Hole type

Chamfer threads (Lcf)

Coating Type

Coating Y/N

Overall Length (L)(mm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Point Taps

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB