(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Screw-Hole-Related Tools（Page6）

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

509 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 15 Day(s) or Less

Taper Pipe Thread Tap for General Application (with OX)_H-TPT

OSG

Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes

Standard Price:	532,462 IDR
Days to Ship:	15 Day(s)

Taper Tap for Pipes Taper Tap for Carbide Pipes OT-TPT

OSG

Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.

Standard Price:	3,113,402 IDR-
Days to Ship:	8 Day(s) or more

Tungsten Carbide Taper Pipe Thread Tap with Long Shank_OT-LT-TPT

OSG

Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.

Standard Price:	3,523,787 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap for Pipes Taper Tap Short Screws for Carbide Pipes OT-S-TPT

OSG

Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.

Standard Price:	3,515,123 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap for Pipes For Difficult-to-Machine Materials CPM-TPT

OSG

The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

Standard Price:	579,277 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT

OSG

The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

Standard Price:	814,336 IDR-
Days to Ship:	8 Day(s) or more

CPM Taper Pipe Thread Tap with Long Shank (Short Thread)_CPM-LT-S-TPT

OSG

The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

Standard Price:	1,102,517 IDR-
Days to Ship:	8 Day(s) or more

Spiral Parallel Pipe Thread Tap for Stainless Steels_SUS-SFT-SPT

OSG

[Specifications]
· Shape: Pipe tap
· Screw type: pipe parallel
· Coating: Non-Coated
· Work Material: Stainless Steel (SUS) [◎] / Copper (Cu) [○]

Standard Price:	401,672 IDR-
Days to Ship:	8 Day(s) or more

Parallel Tap for Pipes New Roll Tap NRT-SPT

OSG

[Features]A new forming tap with overall lengths of 65 mm and 80 mm.
[Applications]It can be used for side mounting of pipe screws and machining of deep holes.

Standard Price:	1,118,477 IDR
Days to Ship:	8 Day(s) or more

Tungsten Carbide Parallel Pipe Thread Tap_OT-SPT

OSG

To match the form of the workpiece, point types have been made available for through holes, and spiral types for blind holes.

Standard Price:	2,828,413 IDR-
Days to Ship:	8 Day(s) or more

Tungsten Carbide Parallel Pipe Thread Tap with Long Shank_OT-LT-SPT

OSG

To match the form of the workpiece, point types have been made available for through holes, and spiral types for blind holes.

Standard Price:	3,193,199 IDR-
Days to Ship:	8 Day(s) or more

CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT

OSG

As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

Standard Price:	348,549 IDR-
Days to Ship:	8 Day(s) or more

UM Nu-Roll Tap for Ultla-small Diameter Threads_UM-NRT

OSG

As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

Standard Price:	568,789 IDR-
Days to Ship:	8 Day(s) or more

Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT

OSG

Ideal for tapping soft steel thin plate with a tensile strength of 700 N/mm² or less. Suppresses production of whiskers, flashes, and chipping.

Standard Price:	429,258 IDR
Days to Ship:	8 Day(s) or more

Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT

OSG

Highly accurate female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.

Standard Price:	226,498 IDR
Days to Ship:	8 Day(s) or more

Grooveless Tap Series Ultra-Synchro Tap US-AL-NRT

OSG

Highly accurate, ultra-high-speed female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.

Standard Price:	365,560 IDR
Days to Ship:	8 Day(s) or more

Fluteless (Nu-Roll) Tap for Steels_NRT

OSG

Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes

Standard Price:	151,070 IDR-
Days to Ship:	8 Day(s) or more

Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT

OSG

Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.

Standard Price:	2,520,624 IDR-
Days to Ship:	8 Day(s) or more

Fluteless Tap for Copper_CU-NRT

OSG

CrN coating with superior wear resistance and anti-weldability for copper has been applied, with HSSE material used to achieve a long machining life for copper.

Standard Price:	360,177 IDR
Days to Ship:	8 Day(s) or more

Fluteless (Hi-Roll) Tap for Non-Ferrous Metals_B-HRT

OSG

Suitable for metals such as aluminum, magnesium, zinc, and copper and non-ferrous alloys of these materials.

STOCK

Standard Price:	143,100 IDR-
Days to Ship:	1 Day(s) or more

Fluteless (Nu-Roll) Tap for Non-Ferrous Metals_B-NRT

OSG

Suitable for metals such as aluminum, zinc, and copper and non-ferrous alloys of these materials.

Standard Price:	307,283 IDR-
Days to Ship:	8 Day(s) or more

MACHINING CENTER Tap (Normal Length)_EX-S-MCT

OSG

Cutting chip bite, easily generated with horizontal machining centers, is kept to a minimum, and stable performance is achieved.

Standard Price:	239,342 IDR
Days to Ship:	8 Day(s) or more

MACHINING CENTER Tap with Long Shank_EX-MCT

OSG

Cutting chip bite, easily generated with horizontal machining centers, is kept to a minimum, and stable performance is achieved.

Standard Price:	664,318 IDR-
Days to Ship:	8 Day(s) or more

MMTS Micro Threading Tool

NS TOOL

Helical threaded with a smaller tool diameter than that of pilot holes, so removal and re-processing is possible when broken

Standard Price:	1,208,993 IDR-
Days to Ship:	8 Day(s) or more

Tap remover Plus (regular size)

EIKOSHA

Repair/removal tool: Drill for removing broken HSS taps.
[Features]
· A recovery drill that sharpens the center of a broken HSS tap.
· As it does not damage the screw threads, re-tapping can be performed after removal.
[Applications]
· Used as a recovery tool when HSS taps are broken.

Standard Price:	1,408,000 IDR-
Days to Ship:	8 Day(s) or more

Tap remover Plus (long size)

EIKOSHA

Drill dedicated for damaged HSS tap removal

Standard Price:	1,557,333 IDR-
Days to Ship:	8 Day(s) or more

Hexagonal Shaft Point Tap for Stainless Steel (for Through Hole)

ONISHI MANUFACTURING

[Features]
· Can be attached to impact screwdriver models capable of forward and reverse rotation to easily drill screw holes.
· Chips inside the work material are discharged forward.
· Stable machining, unlikely to break.
· Due to titanium coating, durability is enhanced, and it can be used on stainless steel as well

STOCK

Standard Price:	452,462 IDR-
Days to Ship:	1 Day(s)

Hexagonal Shaft Tap (for Through Hole)

Hexagonal Shaft Tap (for Through Hole)【3 Pieces Per Package】

ONISHI MANUFACTURING

Hexagonal Shaft Tap
[Features]
Can be attached to electric tools with forward and reverse rotation such as impact screwdriver, and threaded hole processing can be done in a short time.
[Usage]
Formation and modification of thread ridge in through holes.
[Specification]
Screw Length: 20mm
Total Length: 70mm
Shank Diameter: 6.35mm
SPQ: 6piece
Machining Thread: Metric Thread Screw
[Material]
Alloy Tool Steel (SKS2)
Work Material: Iron, Aluminum, Brass.

Standard Price:	418,667 IDR-
Days to Ship:	9 Day(s) or more

Thread Modifying Tools Mini Kits

NOGA JAPAN

Can be used for frequently used screws with inner/outer diameter of 5 to 12 mm

STOCK

Standard Price:	4,495,385 IDR
Days to Ship:	1 Day(s)

Tap holder set

KO-KEN TOOL

Tap holder set, which has been popular for its simple installation by simply inserting the hand tap and its slim shape.
[Features]
· Case Size(mm): W240xH100xT32mm
· Mass: 1050 (g/set)
· Tap handle: 160K
· Extension bar: 3760-125

STOCK

Standard Price:	2,447,000 IDR-
Days to Ship:	1 Day(s)

Spare Hook for T Type Ratchet Tap Holder

TRUSCO NAKAYAMA

If not thoroughly tightened with pliers, or similar, the tap will spin freely, and the jaw may be damaged.

STOCK

Standard Price:	150,940 IDR-
Days to Ship:	1 Day(s)

On Sale Till 31/03/2026

Tap Handle (Made of Iron)

TRUSCO NAKAYAMA

[Features]
· A straight-type handle for hand tap and hand reamer.
· The body is made of iron, stronger and more durable than zinc die casting.
[Applications]
· For tapping.

STOCK

Standard Price:	198,200 IDR-
	Special Price
Days to Ship:	Same day or more

Die Handle

TRUSCO NAKAYAMA

[Features]
· A straight-line round handle for round die.
[Applications]
· A stand for dies.

STOCK

Standard Price:	155,170 IDR-
Days to Ship:	1 Day(s)

Hexagonal Re-threading Die (Coarse)

TRUSCO NAKAYAMA

[Features]
· Used when cleaning out bolts/screws.
· Work can be done using a monkey wrench.
· This product can be used in place of a round die when modifying the screw thread ridges.
[Applications]
· Correction of coarse screw threads.

STOCK

Standard Price:	214,924 IDR-
Days to Ship:	1 Day(s) or more

Hexagonal Re-threading Die (Metric Fine Screw)

TRUSCO NAKAYAMA

[Features]
· To be used when modifying screw threads.
· Work can be done using a monkey wrench.
· This product can be used in place of a round die when modifying the screw thread ridges.
· Used when cleaning out bolts/screws.
[Applications]
· Modification of fine threads.

STOCK

Standard Price:	495,231 IDR-
Days to Ship:	1 Day(s)

Hexagonal Re-threading Die (Whitworth Screw)

TRUSCO NAKAYAMA

[Features]
· Used when cleaning out bolts/screws.
· To be used when modifying screw threads.
· Work can be done using a monkey wrench.
· This product can be used in place of a round die when modifying the screw thread ridges.
[Applications]
· For fixing BSW (Whitworth) Thread.

STOCK

Standard Price:	353,077 IDR-
Days to Ship:	1 Day(s)

Hexagonal Re-threading Die For Gas Pipe (PT Screw)

TRUSCO NAKAYAMA

STOCK

Standard Price:	607,231 IDR-
Days to Ship:	1 Day(s)

Hexagonal Re-threading Die For Gas Pipe (PS Screw)

TRUSCO NAKAYAMA

STOCK

Standard Price:	532,462 IDR-
Days to Ship:	1 Day(s)

Folded Tap Removal Tool, 3 Claws (for 3 Grooves) Switching Claw

Folded Tap Removal Tool, 3 Claws (for 3 Grooves) Switching Claw【3 Pieces Per Package】

TRUSCO NAKAYAMA

A tool that extracts broken taps when broken partway through threading without damaging the screw threads. The claw uses a special steel wire with high torsion strength that is not easily broken, so it can be used to easily remove broken taps which have caught strongly. Even if the claw is broken, it can be used repeatedly until it becomes too short. Also, since it can be simply exchanged with a replacement jaw, it is extremely economical. Dedicated for hand tapping.

Standard Price:	197,847 IDR-
Days to Ship:	1 Day(s)

Broken Tap Extractor (4 Claws)

TRUSCO NAKAYAMA

[Features]
· A tool that extracts broken taps when broken partway through threading without damaging the screw threads.
· The claw uses a special steel wire with high torsion strength that is not easily broken, so it can be used to easily remove broken taps which have caught strongly.
· Even if the claw is broken, it can be used repeatedly until it becomes too short. Also, since it can be simply exchanged with a replacement jaw, it is extremely economical.
· Dedicated for hand tapping.
[Applications]
· For extracting broken hand taps.

Standard Price:	361,847 IDR-
Days to Ship:	1 Day(s)

Folded Tap Removal Tool, 4 Claws (for 4 Grooves) Switching Claw

Folded Tap Removal Tool, 4 Claws (for 4 Grooves) Switching Claw【4 Pieces Per Package】

TRUSCO NAKAYAMA

Standard Price:	222,462 IDR-
Days to Ship:	1 Day(s)

Broken Tap Extractor Set

Broken Tap Extractor Set 【5-7 Pieces Per Package】

TRUSCO NAKAYAMA

Standard Price:	2,501,296 IDR-
Days to Ship:	8 Day(s) or more

Extractor (Square), EX-809K

TRUSCO NAKAYAMA

[Features]
· Used for removing damaged bolts, pipes, etc.
· The square model can be used for both left and right hand bolt screws.
· It is applicable to both left and right bolt screws.
[Applications]
· When the cross hole or slit in the head of a machine screw is damaged.
· For removal of hex bolts with crushed heads or broken bolts.
· For the extraction of things like bolts and pipes that had broken inside.

Standard Price:	58,462 IDR-
Days to Ship:	1 Day(s) or more

Electro plated Diamond Tap for Ceramics_ED-PNT

OSG

[Features]
·With no lead like a regular power strip in this product, the tool attached to the shaft of the pilot hole performs a self-rotating and orbital motion to grind a thread with a lead.
·The X, Y, and Z axes are fed simultaneously, so the prerequisite for use is that the machine is equipped with a 3-axis simultaneous control mechanism.

Standard Price:	3,103,826 IDR-
Days to Ship:	8 Day(s) or more

Threading Round Die Series Pipe Parallel Threading Round Die Series SPD-S-NPS

OSG

[Specifications]
· Shape: Die
· Screw type: pipe parallel
· Coating: Non-Coated
· Tool material: Alloy HSS

Standard Price:	1,649,697 IDR-
Days to Ship:	8 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

																																On Sale Till 31/03/2026
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	NS TOOL	EIKOSHA	EIKOSHA	ONISHI MANUFACTURING	ONISHI MANUFACTURING	NOGA JAPAN	KO-KEN TOOL	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	OSG	OSG
Product Series	Taper Pipe Thread Tap for General Application (with OX)_H-TPT	Taper Tap for Pipes Taper Tap for Carbide Pipes OT-TPT	Tungsten Carbide Taper Pipe Thread Tap with Long Shank_OT-LT-TPT	Taper Tap for Pipes Taper Tap Short Screws for Carbide Pipes OT-S-TPT	Taper Tap for Pipes For Difficult-to-Machine Materials CPM-TPT	Taper Tap for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT	CPM Taper Pipe Thread Tap with Long Shank (Short Thread)_CPM-LT-S-TPT	Spiral Parallel Pipe Thread Tap for Stainless Steels_SUS-SFT-SPT	Parallel Tap for Pipes New Roll Tap NRT-SPT	Tungsten Carbide Parallel Pipe Thread Tap_OT-SPT	Tungsten Carbide Parallel Pipe Thread Tap with Long Shank_OT-LT-SPT	CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT	UM Nu-Roll Tap for Ultla-small Diameter Threads_UM-NRT	Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT	Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT	Grooveless Tap Series Ultra-Synchro Tap US-AL-NRT	Fluteless (Nu-Roll) Tap for Steels_NRT	Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT	Fluteless Tap for Copper_CU-NRT	Fluteless (Hi-Roll) Tap for Non-Ferrous Metals_B-HRT	Fluteless (Nu-Roll) Tap for Non-Ferrous Metals_B-NRT	MACHINING CENTER Tap (Normal Length)_EX-S-MCT	MACHINING CENTER Tap with Long Shank_EX-MCT	MMTS Micro Threading Tool	Tap remover Plus (regular size)	Tap remover Plus (long size)	Hexagonal Shaft Point Tap for Stainless Steel (for Through Hole)	Hexagonal Shaft Tap (for Through Hole)【3 Pieces Per Package】	Thread Modifying Tools Mini Kits	Tap holder set	Spare Hook for T Type Ratchet Tap Holder	Tap Handle (Made of Iron)	Die Handle	Hexagonal Re-threading Die (Coarse)	Hexagonal Re-threading Die (Metric Fine Screw)	Hexagonal Re-threading Die (Whitworth Screw)	Hexagonal Re-threading Die For Gas Pipe (PT Screw)	Hexagonal Re-threading Die For Gas Pipe (PS Screw)	Folded Tap Removal Tool, 3 Claws (for 3 Grooves) Switching Claw【3 Pieces Per Package】	Broken Tap Extractor (4 Claws)	Folded Tap Removal Tool, 4 Claws (for 4 Grooves) Switching Claw【4 Pieces Per Package】	Broken Tap Extractor Set 【5-7 Pieces Per Package】	Extractor (Square), EX-809K	Electro plated Diamond Tap for Ceramics_ED-PNT	Threading Round Die Series Pipe Parallel Threading Round Die Series SPD-S-NPS
Days to Ship	15 Day(s)	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	1 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	1 Day(s)	9 Day(s) or more	1 Day(s)	1 Day(s)	1 Day(s)	Same day or more	1 Day(s)	1 Day(s) or more	1 Day(s)	1 Day(s)	1 Day(s)	1 Day(s)	1 Day(s)	1 Day(s)	1 Day(s)	8 Day(s) or more	1 Day(s) or more	8 Day(s) or more	8 Day(s) or more
Specifications																				STOCK							STOCK		STOCK	STOCK	STOCK	STOCK	STOCK	STOCK	STOCK	STOCK	STOCK	STOCK
Screw size (Nominal)	R1/8	R1/2 ～ R3/8	R1/2 ～ R3/8	R1/2 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	G1 ～ G3/8	PF3/8	G1/2 ～ G3/8	G1/2 ～ G3/8	No.2UN ～ M3	S0.5 ～ S0.9	M6	M4	M3	M1.6 ～ M10	M3 ～ M12	M4	M2.3 ～ M6	M1 ～ M20	M8	M10 ～ M12	S0.1 ～ S1.4	M3 ～ M24	M3 ～ M12	M5 ～ M10	-	-	-	-	M1 to 6 ～ M10 to 25	-	M3 ～ M36	M8 ～ M36	W1 ～ W9/16	R1 ～ R7/8	R1 ～ R7/8	-	-	-	-	-	-	NPS1 ～ NPS3/8
Screw Types	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Meter / unified	Miniature	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Other	-	-	Meter	Meter	-	-	-	-	-	-	-	Whitworth	-	-	-	-	-	-	-	Other	Parallel for Pipes
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Copper (Cu)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Stainless steel (SUS)[◎] / Copper (Cu)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless steel (SUS)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Stainless steel (SUS)[○] / Copper (Cu)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	-	-	Stainless steel (SUS)[○] / Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	-	-	-	-	Zinc Alloy Casting (ZDC)[○]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	-	-	-	-	-	-	-
Pitch (P), Number of Threading(mm)	28	14 ～ 28	14 ～ 28	14 ～ 28	11 ～ 28	11 ～ 19	11 ～ 28	11 ～ 28	19	14 ～ 28	14 ～ 28	0.25 ～ 56	.02 ～ 0.225	1	0.7	0.5	0.35 ～ 1.25	0.5 ～ 1.75	0.7	0.4 ～ 1	0.25 ～ 1.5	1.25	1.5	0.025 ～ 0.3	-	-	0.8 ～ 1.5	-	-	-	-	-	-	0.5 ～ 4	0.75 ～ 2	8 ～ 40	11 ～ 28	11 ～ 28	-	-	-	-	-	0.5 ～ 2	11.5 ～ 27
Tool Material Type	High-speed steel	Carbide	Carbide	Carbide	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	High-speed steel	Carbide	Carbide	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	Carbide	Vanadium High-Speed Steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Carbide	Carbide	High-speed steel	High-speed steel	-	-	-	-	-	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	-	-	-	-	-	-	Alloy HSS
Tap Type	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Spiral Tap	Tap for pipes	Tap for pipes	Tap for pipes	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Thread-cutting-related tool	Thread-cutting-related tool	Thread cutter	Modification/removal Tool	Modification/removal Tool	Thread-cutting-related tool	Thread-cutting-related tool	Modification/removal Tool	Tap wrench	Tap wrench	Tap wrench	Die	Die	Die	Die	Die	Die	Modification/removal Tool	Modification/removal Tool	Modification/removal Tool	Modification/removal Tool	Modification/removal Tool	Thread-cutting-related tool	Die
Hole type	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	-	-	-	For through hole	For through hole	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Chamfer threads (Lcf)	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	3P	3P	2P	2P	8P	2P	2P	2P ～ 4P	2P	2P	2.5P ～ 4P	4P	3P	3P	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Coating Type	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN	CrN	TiCN	Non-Coated	TiCN	Non-Coated	Non-Coated	CrN	Non-Coated	TiN	Non-Coated	Non-Coated	TiAlN	Other	Other	TiN	Non-Coated	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Non-Coated
Coating Y/N	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	Available	Available	NA	Available	NA	NA	Available	NA	Available	NA	NA	Available	Available	Available	Available	NA	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	NA
Overall Length (L)(mm)	55	55 ～ 80	100 ～ 150	55 ～ 80	55 ～ 95	62 ～ 95	120 ～ 150	55 ～ 95	65	55 ～ 80	100 ～ 150	30 ～ 46	30	62	52	46	36 ～ 75	100 ～ 150	52	42 ～ 62	30 ～ 105	70	150	45	40 ～ 120	40 ～ 80	70	70/70/70	-	-	-	170 ～ 460	185 ～ 890	-	-	-	-	-	-	-	-	-	50 ～ 160	50 ～ 80	-