(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Screw-Hole-Related Tools（Coating Type：Non-Coated）
Search by specifying the lower class category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Days to Ship |
|
|---|
-
- On Sale Till 31/03/2026
OSG
High-speed steel hand tap.
Work material: Magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible- Volume Discount
- STOCK
Standard Price: 58,308 IDR- Special Price Days to Ship: Same day or more -
Parallel Tap for Pipes General Use SPT
OSG
Used to process parallel female threads for tapered pipe threads and female threads for parallel pipe threads.
Standard Price: 243,538 IDR- Days to Ship: 2 Day(s) or more -
Hand Tap Set (for Metric Thread Screw)
ISHIHASHI
[Features]
· A tungsten hand tap set.
· Can be used for both through holes and blind holes.
· Economical compared to HSS.
[Applications]
· Work materials: Iron, light metal.
[Material]
· Alloy tool steel (SKS2)- STOCK
Standard Price: 156,924 IDR- Days to Ship: 1 Day(s) or more -
Taper Tap for Pipes General Use TPT
OSG
Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes
Standard Price: 294,000 IDR- Days to Ship: 2 Day(s) or more -
Spiral Tap for General Application_EX-SFT
OSG
Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.
Standard Price: 89,100 IDR- Days to Ship: 1 Day(s) or more -
Threading Round Die Series Pipe General Threading Round Die RD-H
OSG
[Specifications]
· Shape: Die
· Coating: Non-Coated
· Tool material: HSSStandard Price: 1,121,675 IDR- Days to Ship: 8 Day(s) or more -
Hand Tap Set (for Metric Screws/SKS)
TRUSCO NAKAYAMA
[Features]
· Use when manufacturing or cleaning out screw holes.
· For coarse screw thread ridge repair and manufacture.
· A tungsten hand tap set.
[Applications]
· Work materials: Iron, light metal.
· Creation and correction of coarse screw threads.- STOCK
Standard Price: 142,554 IDR- Days to Ship: 1 Day(s) -
- On Sale Till 31/03/2026
OSG
The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC
Standard Price: 153,538 IDR- Special Price Days to Ship: Same day or more -
- On Sale Till 31/03/2026
Spiral Tap for Aluminum_EX-AL-SFT
OSG
Ideal for tapping blind holes in non-ferrous metals such as aluminum and its alloys and die-casting, etc.
- STOCK
Standard Price: 143,100 IDR- Special Price Days to Ship: Same day or more -
Spiral Tap for General Application (with OX)_EX-H-SFT
OSG
Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.
- STOCK
Standard Price: 110,308 IDR- Days to Ship: 1 Day(s) or more -
Grooveless Tap Series Carbide New Roll Tap OT-NRT
OSG
Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.
Standard Price: 1,562,832 IDR- Days to Ship: 8 Day(s) or more -
Hand Tap (for Metric Screws/HSS-E)
TRUSCO NAKAYAMA
[Features]
· Can be used for both through holes and blind holes.
[Applications]
· Work materials: General steel, low/medium carbon steel, alloy steel.- STOCK
Standard Price: 96,000 IDR- Days to Ship: 1 Day(s) -
Mid Tap / Drill Set for Electric Construction 【26 Pieces Per Package】
ISHIHASHI
[Features]
・ A set of hand taps and prepared hole drills for general steel
[Applications]
・ Work material: General steel- STOCK
Standard Price: 1,994,359 IDR Days to Ship: 1 Day(s) -
Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals with Long Shank_HL-LT-B-NRT
OSG
Suitable for increasing the life of the tap or as a countermeasure against chipping, while cutting aluminum (cast, rolled and forged) and other light alloys.
Standard Price: 764,445 IDR Days to Ship: 8 Day(s) or more -
Hand Tap Set (for Metric Screws/HSS-E)
TRUSCO NAKAYAMA
[Features]
· Can be used for both through holes and blind holes.
· It is a high-speed steel (HSS-E) tap set.
[Applications]
· Work materials: General steel, low/medium carbon steel, alloy steel.- STOCK
Standard Price: 324,216 IDR- Days to Ship: 1 Day(s) or more -
Hand Tap / Drill Set【21 Pieces Per Package】
ISHIHASHI
Set of 14 Medium Hand Taps and 7 Pilot Hole Drills in Case
- STOCK
Standard Price: 2,730,428 IDR Days to Ship: 1 Day(s) -
- On Sale Till 31/03/2026
Threading Round Die Series Pipe General Threading Round Die RD-S
OSG
[Specifications]
· Shape: Die
· Coating: Non-Coated
· Tool material: Alloy HSS (SKS)- STOCK
Standard Price: 422,034 IDR- Special Price Days to Ship: Same day or more -
Spiral Tap for Stainless Steels_EX-SUS-SFT
OSG
Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.
- STOCK
Standard Price: 117,366 IDR- Days to Ship: Same day or more -
Straight Flutes Tap for Spatter Remove_SR-HT
OSG
Ideal for removing welding spatter and cutting chips inside the female thread.
Tool Material: Vanadium high-speed steel
Coating: Surface treatment, uncoated
Number of threads on chamfer: 5P
Accuracy (class) 0.06Standard Price: 139,937 IDR- Days to Ship: 8 Day(s) or more -
Straight Flutes Tap for Cast Iron_EX-FC-HT
OSG
Suitable for all kinds of cast iron, such as gray cast iron, spheroidal graphite cast iron, and malleable cast iron, as well as brass castings.
- STOCK
Standard Price: 145,000 IDR- Days to Ship: 1 Day(s) or more -
Tungsten Carbide Straight Flutes Tap for Die Castings_OT-DC-HT
OSG
Ideal for tapping aluminum alloy castings, etc. in large quantities with high precision automatic machines, etc.
Standard Price: 1,232,244 IDR- Days to Ship: 8 Day(s) or more -
Tungsten Carbide Straight Flutes Tap_OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
Standard Price: 1,014,396 IDR- Days to Ship: 2 Day(s) or more -
CPM Straight Flutes Tap_CPM-HT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Standard Price: 368,461 IDR- Days to Ship: 8 Day(s) or more -
- On Sale Till 31/03/2026
Pointed Tap Series, General Purpose EX-POT
OSG
For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way
- STOCK
Standard Price: 97,231 IDR- Special Price Days to Ship: Same day or more -
Pointed Tap for General Application (with OX)_EX-H-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.
- STOCK
Standard Price: 91,539 IDR- Days to Ship: 1 Day(s) or more -
Taper Pipe Thread Tap for Stainless Steels with Long Shank (Short Thread)_LT-SUS-S-TPT
OSG
This is a short thread long shank type used for machining female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.
Standard Price: 851,043 IDR- Days to Ship: 8 Day(s) or more -
ONISHI MANUFACTURING
[Features]
· Impact drill compatible hexagonal shaft drilling tool for simultaneous pilot hole drilling and thread cutting work.
[Applications]
· For formation and modification of through-hole threads.
· Work materials: Iron, aluminum, brass.
[Features]
· 1 unit enables pilot hole machining and thread cutting at the same time.
· 6.35 mm hex shaft finish that supports impact drivers.
· Drill cutting edge with good bite due to X-type thinning and outstanding sharpnessStandard Price: 473,907 IDR- Days to Ship: 10 Day(s) or more -
Spiral Tap / Drill Set【21 Pieces Per Package】
ISHIHASHI
Set in steel case including spiral taps, pilot hole drills, and tap wrenches
- STOCK
Standard Price: 5,050,770 IDR Days to Ship: 12 Day(s) -
Hand Tap (for Metric Screws / SKS)
TRUSCO NAKAYAMA
[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying coarse screw threads.
[Applications]
· Work materials: iron, light metals.
· For creating and modifying coarse screw threads.
[Materials]
· Low alloy steel (SKS)- STOCK
Standard Price: 756,615 IDR- Days to Ship: 1 Day(s) -
Hand Tap Set (for Metric Screws / SKS)
TRUSCO NAKAYAMA
[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying coarse screw threads.
· Tungsten hand tap set.
[Applications]
· Work materials: iron, light metals.
· For creating and modifying coarse screw threads.
[Materials]
· Low alloy steel (SKS)- STOCK
Standard Price: 2,058,308 IDR- Days to Ship: 1 Day(s) -
YAMAWA MFG
[Features]
· Tap holder used to extend the tap length for use.
· Can be used to make I series taps (ISP/IPO/IHT) longer.
· Alloy steel.Standard Price: 2,214,551 IDR- Days to Ship: 10 Day(s) or more -
Straight Flutes Insert Screw Thread Tap_HL-HT
OSG
Used for thread tapping of female threads by inserting the helical coil. Compared to ordinary taps of the same nominal size, the outer diameter is made larger according to the size of the insert even though the pitch is the same.
Standard Price: 224,522 IDR- Days to Ship: 8 Day(s) or more -
Spiral Tap for Stainless Steels with Long Shank_EX-LT-SUS-SFT
OSG
Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.
Standard Price: 270,576 IDR- Days to Ship: 8 Day(s) or more -
OSG
The low helical grooves discharge chips backward while cutting them finely to achieve stable screw tapping. Features excellent anti-chipping as well.
Standard Price: 179,100 IDR Days to Ship: 2 Day(s) -
Spiral Tap General Purpose, Long Shank EX-LT-SFT
OSG
For standard spiral taps, it is used when the protruding length of the screw is insufficient.
Standard Price: 179,100 IDR- Days to Ship: 8 Day(s) or more -
Oversize Straight Flutes Tap_EX-OST
OSG
Since it is oversized compared to the hand tap (HT), it has a long life with work material which tends to shrink, and it can machine a JIS2 grade female screw.
- STOCK
Standard Price: 161,830 IDR- Days to Ship: 1 Day(s) or more -
- On Sale Till 31/03/2026
Straight Flutes Tap for Stainless Steels_EX-SUS-HT
OSG
Suitable for stainless steel, heat resistant steel, nickel manganese steel, and others. Suitable for carbon steel and alloy steel materials.
Standard Price: 136,289 IDR- Special Price Days to Ship: Same day -
Pointed Tap for Deep Holes EX-DH-POT
OSG
Particularly suitable for workpieces which are easily scorched because the screw tapping length is particularly long.
Standard Price: 134,100 IDR- Days to Ship: 2 Day(s) or more -
Pointed Tap for Thin Plate EX-SS-POT
OSG
Ideal for tapping soft steel thin plates (through holes) with a tensile strength of 700 N/mm² or less. A beautiful finished surface is obtained as the generation of punch hole and bearing hole whiskers, flashes, or chipping can be kept to a minimum
- STOCK
Standard Price: 126,296 IDR- Days to Ship: 1 Day(s) or more -
Spiral Taper Pipe Thread Tap for Stainless Steels (Short Thread)_SUS-SFT-S-TPT
OSG
This is a short thread type used for machining female tapered pipe threads. It is suitable for blind holes with difficult-to-cut materials such as stainless steel.
Standard Price: 606,864 IDR- Days to Ship: 8 Day(s) or more -
Taper Pipe Thread Tap for Stainless Steels (Short Thread)_EX-SUS-S-TPT
OSG
This is a short thread type used for machining female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.
Standard Price: 484,660 IDR- Days to Ship: 8 Day(s) or more -
OSG
Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes
- STOCK
Standard Price: 134,100 IDR- Days to Ship: 1 Day(s) or more -
Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT
OSG
Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.
Standard Price: 2,520,624 IDR- Days to Ship: 8 Day(s) or more -
Hand Tap (for Metric Screws/SKS)
TRUSCO NAKAYAMA
[Features]
· Use when manufacturing or cleaning out screw holes.
· For coarse screw thread ridge repair and manufacture.
[Applications]
· Work materials: Iron, light metal.
· Creation and correction of coarse screw threads.- STOCK
Standard Price: 43,693 IDR- Days to Ship: 1 Day(s) -
Threading Round Die Series Pipe Parallel Threading Round Die SPD-S-PS
OSG
[Specifications]
· Shape: Die
· Screw type: pipe parallel
· Coating: Non-Coated
· Tool material: Alloy HSSStandard Price: 741,440 IDR- Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | ISHIHASHI | OSG | OSG | OSG | TRUSCO NAKAYAMA | OSG | OSG | OSG | OSG | TRUSCO NAKAYAMA | ISHIHASHI | OSG | TRUSCO NAKAYAMA | ISHIHASHI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | ONISHI MANUFACTURING | ISHIHASHI | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | YAMAWA MFG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | TRUSCO NAKAYAMA | OSG |
| Product Series | Threading Round Die Series Pipe General Threading Round Die RD-H | Mid Tap / Drill Set for Electric Construction 【26 Pieces Per Package】 | Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals with Long Shank_HL-LT-B-NRT | Threading Round Die Series Pipe General Threading Round Die RD-S | Tungsten Carbide Straight Flutes Tap for Die Castings_OT-DC-HT | Taper Pipe Thread Tap for Stainless Steels with Long Shank (Short Thread)_LT-SUS-S-TPT | Spiral Tap for Stainless Steels with Long Shank_EX-LT-SUS-SFT | Spiral Taper Pipe Thread Tap for Stainless Steels (Short Thread)_SUS-SFT-S-TPT | Taper Pipe Thread Tap for Stainless Steels (Short Thread)_EX-SUS-S-TPT | Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT | Threading Round Die Series Pipe Parallel Threading Round Die SPD-S-PS | ||||||||||||||||||||||||||||||||||
| Days to Ship | Same day or more | 2 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 8 Day(s) or more | 1 Day(s) | Same day or more | Same day or more | 1 Day(s) or more | 8 Day(s) or more | 1 Day(s) | 1 Day(s) | 8 Day(s) or more | 1 Day(s) or more | 1 Day(s) | Same day or more | Same day or more | 8 Day(s) or more | 1 Day(s) or more | 8 Day(s) or more | 2 Day(s) or more | 8 Day(s) or more | Same day or more | 1 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 12 Day(s) | 1 Day(s) | 1 Day(s) | 10 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 2 Day(s) | 8 Day(s) or more | 1 Day(s) or more | Same day | 2 Day(s) or more | 1 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 1 Day(s) or more | 8 Day(s) or more | 1 Day(s) | 8 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||
| Screw size (Nominal) | No.0UN ～ M39 | G1 ～ G7/8 | M3 ～ M12 | R1 ～ R7/8 | No.10UN ～ M56 | W1 ～ M25 | M2 ～ M16 | M1.4 ～ M48 | M3 ～ M8 | M1 ～ M42 | M3 ～ M12 | M3 ～ M16 | - | M8 | M3 ～ M16 | - | No.10UN ～ M48 | No.10UN ～ M42 | M5 ～ M12 | M3 ～ M12 | M3 ～ M12 | M1.4 ～ M20 | M8 ～ M12 | No.0UN ～ M48 | M1.4 ～ M42 | R1/2 ～ R3/8 | M3 ～ M6 | - | M18 ～ M30 | M18 ～ M30 | M3 ～ M10 | No.8UN ～ M6 | M3 ～ M24 | M6 | M2 ～ M36 | M3 ～ M12 | M2.5 ～ M5 | M2.5 ～ M10 | M2 ～ M12 | R1 ～ R3/8 | R1 ～ R3/8 | M1.4 ～ M5 | M3 ～ M12 | M2 ～ M16 | R1 ～ R7/8 |
| Screw Types | Meter / unified / Whitworth / Sewing Machine | Parallel for Pipes | Meter | Taper for Pipe | Meter / unified / Whitworth | Meter / Whitworth | Meter | Meter | Meter | Meter | Meter | Meter | - | Meter | Meter | - | Meter / unified / Whitworth / Sewing Machine | Meter / unified / Whitworth | Meter | Meter | Meter | Meter | Meter | Meter / unified / Whitworth / Sewing Machine | Meter | Taper for Pipe | Meter | - | Meter | Meter | Meter | Meter / unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Meter | Meter | Meter | Parallel for Pipes |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | - | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | - | - | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | - | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] | Cast Iron (FC)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | - | - | - | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Stainless steel (SUS)[◎] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - |
| Pitch (P), Number of Threading(mm) | 0.25 ～ 80 | 11 ～ 28 | 0.6 ～ 1.75 | 11 ～ 28 | 0.25 ～ 48 | 0.35 ～ 40 | 0.4 ～ 2 | 0.3 ～ 5 | 0.5 ～ 1 | 0.25 ～ 4.5 | 0.5 ～ 1.75 | 0.5 ～ 2 | - | 1.25 | 0.5 ～ 2 | - | 0.25 ～ 64 | 0.4 ～ 48 | 0.8 ～ 1.25 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.3 ～ 2.5 | 1.25 ～ 1.75 | 0.25 ～ 80 | 0.3 ～ 4.5 | 14 ～ 28 | 0.5 ～ 1 | - | 2.5 ～ 3.5 | 2.5 ～ 3.5 | 150 | 1 ～ 32 | 0.5 ～ 3 | 1 | 0.4 ～ 4 | 0.5 ～ 1.75 | 0.45 ～ 0.8 | 0.45 ～ 1.25 | 0.4 ～ 1.75 | 11 ～ 28 | 11 ～ 28 | 0.3 ～ 0.8 | 0.5 ～ 1.75 | 0.4 ～ 2 | 11 ～ 28 |
| Tool Material Type | High-speed steel | High-speed steel | - | High-speed steel | Vanadium High-Speed Steel | High-speed steel | Alloy HSS | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | - | High-speed steel | High-speed steel | - | Alloy HSS | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | High-speed steel | High-speed steel | - | - | - | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | High-speed steel | Carbide | Alloy HSS | Alloy HSS |
| Tap Type | Hand Tap | Tap for pipes | Hand Tap | Tap for pipes | Spiral Tap | Die | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Roll tap | Hand Tap | Thread-cutting-related tool | Roll tap | Hand Tap | Thread-cutting-related tool | Die | Spiral Tap | Modification/removal Tool | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Point tap | Point tap | Tap for pipes | Thread-cutting-related tool | Thread-cutting-related tool | Hand Tap | Hand Tap | Thread-cutting-related tool | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Hand Tap | Point tap | Point tap | Tap for pipes | Tap for pipes | Roll tap | Roll tap | Hand Tap | Die |
| Hole type | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For blind hole | - | - | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | - | - | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole | For through hole / For blind hole | For through hole | - | - | - | - | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | - | - |
| Chamfer threads (Lcf) | 1.5P ～ 9P | 1.5P ～ 4P | - | 2.5P | 2.5P ～ 3P | - | - | 3P | 2.5P | 2.5P ～ 3P | 2P | 1.5P ～ 9P | - | 2P | - | - | - | 2.5P ～ 3P | 5P | 1.5P ～ 3P | 1.5P | 1.5P ～ 3P | 2P ～ 5P | 5P | 5P | 2.5P | - | - | - | - | - | 1.5P ～ 5P | 2.5P | 2.5P | 2.5P | 1.5P ～ 5P | 1.5P | 4P | 5P | 2.5P | 2.5P | 2.5P ～ 4P | 2P | 1.5P ～ 9P | - |
| Coating Type | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Coating Y/N | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Overall Length (L)(mm) | 30 ～ 155 | 55 ～ 170 | - | 55 ～ 170 | 30 ～ 205 | - | 40 ～ 95 | 34 ～ 185 | 46 ～ 70 | 30 ～ 175 | 46 ～ 82 | 46 ～ 95 | - | 150 | 46 ～ 95 | - | - | 40 ～ 175 | 60 ～ 80 | 46 ～ 82 | 46 ～ 82 | 34 ～ 105 | 70 ～ 82 | 30 ～ 185 | 34 ～ 175 | 100 ～ 150 | 66 ～ 69 | - | 100 ～ 135 | - | 103 ～ 127 | 60 ～ 82 | 100 ～ 150 | 62 | 80 ～ 300 | 46 ～ 82 | 44 ～ 60 | 44 ～ 75 | 40 ～ 82 | 55 ～ 95 | 55 ～ 95 | 34 ～ 60 | 100 ～ 150 | 40 ～ 95 | - |
Loading...
Configure
Specification/Dimensions
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No.0UN
- NO.0-80UNF
- NO.10
- No.10
- No.1UN
- No.10UN
- No.10UNF
- No.10UNJ
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- NO.4
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- No.6UN
- S0.6
- NO.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- No.8UN
- No.8UNJ
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPTF1
- PF1
- PT1
- R1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1'-11
- 1-8UNC
- 1 1/2
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- PT 1 1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1 1/2-8UN
- 1 1/4
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PT 1 1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1"1/16UN
- 1/2
- 1/2PF
- 1/2UN
- 1/2UNJ
- 1/2W
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1 3/4-8UN
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- 1/4UNF
- 1/4UNJ
- 1/4W
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- W1"5/8
- 1 5/8-8UN
- M1 to 6
- M1～6
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- 1/8PT
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PS1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- M1 to 10
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- M1.1
- M1.2
- S1.2
- 1.25
- M1.4
- S1.4
- 1.5
- M1.6
- M1.7
- M1.8
- 2
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- R2
- Rp2
- W2
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- W2"1/4
- M2 to 4.5
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- G3
- M3
- M3.0
- R3
- Rp3
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PT 3/4
- R3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8-UNJ
- 3/8UN
- 3/8UNF
- 3/8W
- G3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PS3/8
- PT3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- SM3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 to 10
- 3/16
- SM3/16
- W3/16
- SM3/32
- 3.5
- M3.5
- 4
- 4M
- G4
- M4
- M4.0
- R4
- Rp4
- M4 to 6
- M4 to 13
- M4.5
- 5M
- M5
- M5.0
- M5
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/8W11
- M5 to 10
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNF
- 5/16UNJ
- 5/16W
- SM5/16
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5.5M
- M5.5
- 6
- M6
- M6.0
- No6-40UNF
- M6 to 20
- M7
- PG7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- 7/16UNJ
- SM7/16
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- SM7/32
- 7.5
- M8
- 9
- M9
- PG9
- 9/16
- 9/16UN
- W9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- 9/64
- SM9/64
- M10
- M10
- M10 to 13
- M10 to 25
- M11
- PG11
- SM11/32
- SM11/64
- M12
- M12.0
- M12
- M13
- PG13.5
- M14
- M14.0
- M15
- SM15/64
- M16
- PG16
- M17
- M18
- M19
- M19 to 32
- M19 to 38
- M20
- M21
- PG21
- M22
- M22X
- M23
- M24
- M24X
- M25
- M25X
- M25 to 50
- M25 to 70
- M26
- M27
- M28
- PG29
- M30
- M32
- M33
- M34
- M35
- M36
- PG36
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M48
- M50
- M52
- M56
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.63
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.79
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1.058
- 1.25
- 1.27
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 27
- 28
- 32
- 36
- 40
- 44
- 48
- 56
- 64
- 72
- 80
- 150
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- OSG (97)
- ISHIHASHI (12)
- YAMAWA MFG (8)
- TRUSCO NAKAYAMA (7)
- ONISHI MANUFACTURING (2)
- RUKO (1)
- NOGA JAPAN (0)
- NS TOOL (0)
- KOKEN (0)
- NIIGATA SEIKI (SK) (0)
- NEW STRONG (0)
- SATA TOOLS (0)
- HITACHIKOKI (0)
- KO-KEN TOOL (0)
- TSUBOSAN (0)
- SKC (0)
- MITSUBISHI HITACHI TOOL (0)
- GUHRING (0)
- ENGINEER (0)
- RENNSTEIG (0)
- UNION TOOL (0)
- NACHI(FUJIKOSHI) (0)
- SANDVIK (0)
- EIKOSHA (0)
- DC SWISS (0)
- ESCO (0)
- LIGHTSEIKI (0)
- TANOI MFG (0)
CAD
-
- 2D
- 3D
Related Categories to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy