(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Screw-Hole-Related Tools（Tool Material Type：Cobalt HSS）

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

19 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 15 Day(s) or Less

Hand Taps for Hard-to-Machine Materials_EH-HT

YAMAWA MFG

Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.

Standard Price:	218,000 IDR-
Days to Ship:	12 Day(s) or more

MT Series High-Speed Steel Spiral Tap

MISUMI

[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.

Volume Discount

Standard Price:	108,175 IDR-
Days to Ship:	9 Day(s) or more

Thread Mills for Metric Internal Threads_MC-HLC

YAMAWA MFG

A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.

Standard Price:	4,693,950 IDR-
Days to Ship:	10 Day(s) or more

Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO

YAMAWA MFG

Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.

Standard Price:	177,333 IDR-
Days to Ship:	10 Day(s) or more

MT Series High-Speed Steel Point Tap

MISUMI

Volume Discount

Standard Price:	108,175 IDR-
Days to Ship:	9 Day(s) or more

Straight Flutes Tap for Plastic / Resin_EX-PLA-HT

OSG

Suitable for thermosetting resins such as phenol (bakelite), epoxy, urea, and melamine.

STOCK

Standard Price:	200,000 IDR-
Days to Ship:	1 Day(s)

Planet Cutter Series MC - Planet Cutter PNGT

OSG

If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.

Standard Price:	4,575,055 IDR-
Days to Ship:	9 Day(s) or more

Cobalt jet tap

ISHIHASHI

High molybdenum content for toughness, with superior high hardness, heat resistance, and wear resistance.

STOCK

Standard Price:	230,769 IDR-
Days to Ship:	1 Day(s) or more

Cobalt jet/spiral type/drill set

Cobalt jet/spiral type/drill set 【21 Pieces Per Package】

ISHIHASHI

Set of Cobalt Jet Taps, Cobalt Spiral Taps, and Cobalt Masamune Drills in Steel Case

STOCK

Standard Price:	5,404,924 IDR
Days to Ship:	1 Day(s)

Cobalt spiral type/drill set

Cobalt spiral type/drill set 【21 Pieces Per Package】

ISHIHASHI

Set of Cobalt Spiral Taps and Cobalt Masamune Drills in Steel Case

Standard Price:	4,825,642 IDR
Days to Ship:	Quote

For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP

YAMAWA MFG

Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Also suitable for horizontal/vertical machining of blind holes in materials such as carbon steel and alloy steel.

Standard Price:	414,833 IDR-
Days to Ship:	10 Day(s) or more

Spiral Fluted Taps for Steels, for Dry Tapping and for UltraHigh Speed Tapping, Through Hole Use (with LH Spiral Fluted)_HDISL

YAMAWA MFG

[Features]
· Ultra-high-speed machining and mist or dry machining is possible with a side through-hole shape adopted.
· Suitable for through-holes in cast aluminum, can be used both horizontally and vertically, and can be used for dry machining and ultra-high speed machining.

Standard Price:	414,833 IDR-
Days to Ship:	10 Day(s) or more

For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Aluminum_HFAHS

YAMAWA MFG

Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Suitable for blind holes in aluminum castings, for longitudinal machining.

Standard Price:	408,500 IDR-
Days to Ship:	9 Day(s) or more

For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Aluminum_HFASP

YAMAWA MFG

Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Suitable for blind holes in aluminum castings, for transverse machining.

Standard Price:	414,833 IDR-
Days to Ship:	10 Day(s) or more

For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Steels_HFIHS

YAMAWA MFG

Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for vertical machining of blind holes in materials such as carbon steel and alloy steel.

Standard Price:	414,833 IDR-
Days to Ship:	10 Day(s) or more

For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Steels_HFISP

YAMAWA MFG

Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for horizontal machining of blind holes in materials such as carbon steel and alloy steel.

Standard Price:	408,500 IDR-
Days to Ship:	9 Day(s) or more

For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Aluminum_HDASP

YAMAWA MFG

Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Suitable for blind holes in aluminum castings, for both longitudinal and transverse machining.

Standard Price:	408,500 IDR-
Days to Ship:	10 Day(s) or more

Spiral Fluted Tap for Through Hole On Medium Hardness Carbon Steel for MHSL Meter Screw

YAMAWA MFG

[Features]
· Medium hardness through-hole steel machining exhibits outstanding effects.
· Boasts second to none durability for cutting of automobile parts (medium carbon steel, etc.) such as hub bearings.
[Applications]
· For through hole finish work.
· Work materials: High carbon steel, alloy steel, and tool steel.
[Material]
· High-Speed Steel (HSS-Co)

Standard Price:	498,462 IDR-
Days to Ship:	Quote

Spiral Fluted Taps for Carbon Steels of Medium Hardness,Through Hole Use (with LH Spiral Flutes)_MHSL-J

YAMAWA MFG

[Features]
· Ideal for S48C to S55C forged products and tempered materials (20 to 30 HRC).
· Realizes longer life by adopting a special coating and high-speed steel material for abrasion resistance.
· Adopts an original groove shape that realizes stable scrap discharge at medium speeds.
· Improves the surface roughness of female threads.

Standard Price:	374,006 IDR-
Days to Ship:	10 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)


Brand	YAMAWA MFG	MISUMI	YAMAWA MFG	YAMAWA MFG	MISUMI	OSG	OSG	ISHIHASHI	ISHIHASHI	ISHIHASHI	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product Series	Hand Taps for Hard-to-Machine Materials_EH-HT	MT Series High-Speed Steel Spiral Tap	Thread Mills for Metric Internal Threads_MC-HLC	Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO	MT Series High-Speed Steel Point Tap	Straight Flutes Tap for Plastic / Resin_EX-PLA-HT	Planet Cutter Series MC - Planet Cutter PNGT	Cobalt jet tap	Cobalt jet/spiral type/drill set 【21 Pieces Per Package】	Cobalt spiral type/drill set 【21 Pieces Per Package】	For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Steels_HDISP	Spiral Fluted Taps for Steels, for Dry Tapping and for UltraHigh Speed Tapping, Through Hole Use (with LH Spiral Fluted)_HDISL	For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Aluminum_HFAHS	For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Aluminum_HFASP	For Ultra Fast Tapping, Vertical Use. Spiral Fluted Taps for Steels_HFIHS	For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Steels_HFISP	For Dry Tapping, Blind Hole Use. Spiral Fluted Taps for Aluminum_HDASP	Spiral Fluted Tap for Through Hole On Medium Hardness Carbon Steel for MHSL Meter Screw	Spiral Fluted Taps for Carbon Steels of Medium Hardness,Through Hole Use (with LH Spiral Flutes)_MHSL-J
Days to Ship	12 Day(s) or more	9 Day(s) or more	10 Day(s) or more	10 Day(s) or more	9 Day(s) or more	1 Day(s)	9 Day(s) or more	1 Day(s) or more	1 Day(s)	Quote	10 Day(s) or more	10 Day(s) or more	9 Day(s) or more	10 Day(s) or more	10 Day(s) or more	9 Day(s) or more	10 Day(s) or more	Quote	10 Day(s) or more
Specifications						STOCK		STOCK	STOCK
Screw size (Nominal)	M3 ～ M8	M2 ～ M24	1015 ～ 32506N300M	M3 ～ M24	M2 ～ M24	M3 ～ M6	-	M4 ～ M16	-	-	M6 ～ M20	M6 ～ M20	M6 ～ M20	M6 ～ M20	M6 ～ M20	M6 ～ M20	M6 ～ M20	M6 ～ M16	M6 ～ M16
Screw Types	Meter	Meter	Meter / Taper for Pipe / Parallel for Pipes	Meter	Meter	Meter	Meter / Taper for Pipe / Parallel for Pipes	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter
work material	Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Copper (Cu)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Thermosetting plastic (bakelite, phenol, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	-	-	-	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○]
Pitch (P), Number of Threading(mm)	0.5 ～ 1.25	0.4 ～ 3	-	0.5 ～ 3	0.4 ～ 3	0.5 ～ 1	1 ～ 19	0.7 ～ 2	-	-	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75
Tool Material Type	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS
Tap Type	Hand Tap	Spiral Tap	Thread cutter	Point tap	Point tap	Hand Tap	Thread cutter	Point tap	Thread-cutting-related tool	Thread-cutting-related tool	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap
Hole type	For through hole / For blind hole	For blind hole	-	For through hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	-	-	-	For through hole / For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole
Chamfer threads (Lcf)	2.5P ～ 5P	2.5P	-	4.5P	5P	3P	-	-	-	-	2.5P	5P	2.5P	2.5P	2.5P	2.5P	2.5P	5P ～ 7P	5P ～ 7P
Coating Type	-	Non-Coated	TiN	-	Non-Coated	Non-Coated	TiN	Non-Coated	Non-Coated	Non-Coated	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	Other
Coating Y/N	NA	NA	Available	NA	NA	Available	Available	NA	NA	NA	Available	Available	Available	Available	Available	Available	Available	Available	Available
Overall Length (L)(mm)	46 ～ 70	40 ～ 120	70 ～ 200	46 ～ 120	40 ～ 120	46 ～ 62	80 ～ 210	52 ～ 95	-	-	62 ～ 105	62 ～ 105	62 ～ 105	62 ～ 105	62 ～ 105	62 ～ 105	62 ～ 105	62 ～ 95	62 ～ 95

Configure

Specification/Dimensions

Screw size (Nominal)
CTG-54

CTG-42

CTG-36

CTG-28

CTG-22

CTG-16

No.0UN

NO.0-80UNF

NO.10

No.10

No.1UN

No.10UN

No.10UNF

No.10UNJ

S0.1

NO.1-72UNF

NO.1-64UNC

NO.10-32UNF

No.10-32UNF

NO.10-24UNC

No.10-24UNC

No.12

No.12UN

NO.12-28UNF

No.12-28UNF

NO.12-24UNC

No.12-24UNC

No.2

No.2UN

S0.2

NO.2-64UNF

No.2-64UNF

NO.2-56UNC

No.2-56UNC

No.3

No.3UN

S0.3

NO.3-56UNF

No.3-56UNF

NO.3-48UNC

No.3-48UNC

NO.4

No.4

No.4UN

S0.4

NO.4-48UNF

No.4-48UNF

NO.4-40UNC

No.4-40UNC

No.5

No.5UN

S0.5

NO.5-44UNF

No.5-44UNF

NO.5-40UNC

No.5-40UNC

No.6

No.6UN

S0.6

NO.6-40UNF

No.6-32UNC

S0.7

No.8

No.8UN

No.8UNJ

S0.8

NO.8-36UNF

No.8-36UNF

NO.8-32UNC

No.8-32UNC

S0.9

1

1UN

1UNS

G1

M1

NPS1

NPT1

NPTF1

PF1

PT1

R1

Rp1

S1

UNC1

UNF1

W1

1'-11

1-8UNC

1 1/2

1"1/2UN

G1"1/2

NPS1"1/2

NPT1"1/2

PT 1 1/2

R1"1/2

Rp1"1/2

W1"1/2

1 1/2-8UN

1 1/4

1"1/4UN

G1"1/4

NPS1"1/4

NPT1"1/4

PT 1 1/4

R1"1/4

Rp1"1/4

W1"1/4

1 1/4-8UN

1"1/8UN

G1"1/8

R1"1/8

W1"1/8

1 1/8-8UN

1"1/16UN

1/2

1/2PF

1/2UN

1/2UNJ

1/2W

G1/2

NPS1/2

NPT1/2

NPTF1/2

PT 1/2

R1/2

Rc1/2

Rp1/2

UNC1/2

UNF1/2

W1/2

1/2-20UNF

1/2-14

1/2-13UNC

1/2W12

1"3/4UN

G1"3/4

R1"3/4

Rp1"3/4

W1"3/4

1 3/4-8UN

1"3/8UN

G1"3/8

R1"3/8

W1"3/8

1 3/8-8UN

1/4

1/4UN

1/4UNF

1/4UNJ

1/4W

G1/4

NPS1/4

NPT1/4

NPTF1/4

PF1/4

PT 1/4

R1/4

Rc1/4

Rp1/4

SM1/4

UNC1/4

UNF1/4

W1/4

1/4-28UNF

1/4-20UNC

1/4-19

W1"5/8

1 5/8-8UN

M1 to 6

M1～6

W1"7/8

1 7/8-8UN

1'W8

1/8

1/8PT

G1/8

NPS1/8

NPT1/8

NPTF1/8

PF1/8

PS1/8

PT 1/8

R1/8

Rc1/8

Rp1/8

SM1/8

W1/8

1/8-28

M1 to 10

1/16

G1/16

NPS1/16

NPT1/16

R1/16

Rp1/16

M1.1

M1.2

S1.2

1.25

M1.4

S1.4

1.5

M1.6

M1.7

M1.8

2

2UN

G2

M2

M2.0

NPS2

NPT2

R2

Rp2

W2

2-8UN

G2"1/2

R2"1/2

Rp2"1/2

W2"1/4

M2 to 4.5

M2.2

M2.3

M2.5

M2.6

3M

G3

M3

M3.0

R3

Rp3

G3"1/2

R3"1/2

Rp3"1/2

3/4

3/4UN

G3/4

NPS3/4

NPT3/4

NPTF3/4

PT 3/4

R3/4

Rp3/4

UNC3/4

UNF3/4

W3/4

3/4-16UNF

3/4-14

3/4-10UNC

3/4W10

3/8

3/8-UNJ

3/8UN

3/8UNF

3/8W

G3/8

NPS3/8

NPT3/8

NPTF3/8

PF3/8

PS3/8

PT3/8

PT 3/8

R3/8

Rc3/8

Rp3/8

SM3/8

UNC3/8

UNF3/8

W3/8

3/8-24UNF

3/8-19

3/8-16UNC

3/8W16

M3 to 10

3/16

SM3/16

W3/16

SM3/32

3.5

M3.5

4

4M

G4

M4

M4.0

R4

Rp4

M4 to 6

M4 to 13

M4.5

5M

M5

M5.0

M5

5/8

5/8UN

G5/8

NPS5/8

R5/8

UNC5/8

UNF5/8

W5/8

5/8-18UNF

5/8-11UNC

5/8W11

M5 to 10

M5 to 13

5/16

5/16UN

5/16UNF

5/16UNJ

5/16W

SM5/16

UNC5/16

UNF5/16

W5/16

5/16-24UNF

5/16-18UNC

5/16W18

W5/32

5.5M

M5.5

6

M6

M6.0

No6-40UNF

M6 to 20

M7

PG7

7/8

7/8UN

G7/8

NPS7/8

R7/8

UNC7/8

UNF7/8

W7/8

7/8-14UNF

7/8-9UNC

7/8W9

7/16

7/16UN

7/16UNJ

SM7/16

UNC7/16

UNF7/16

W7/16

7/16-20UNF

7/16-14UNC

SM7/32

7.5

M8

9

M9

PG9

9/16

9/16UN

W9/16

9/16-18UNF

9/16-12UNC

SM9/32

9/64

SM9/64

M10

M10

M10 to 13

M10 to 25

M11

PG11

SM11/32

SM11/64

M12

M12

M13

PG13.5

M14

M15

SM15/64

M16

PG16

M17

M18

M19

M19 to 32

M19 to 38

M20

M21

PG21

M22

M22X

M23

M24

M24X

M25

M25X

M25 to 50

M25 to 70

M26

M27

M28

PG29

M30

M32

M33

M34

M35

M36

PG36

M38

M39

M40

M42

PG42

M44

M45

M48

M50

M52

M56

1015

1020N100M

1020N150M

06510X28R

10154

12204

12254N100M

12254N150M

12254N200M

16304N100M

16304N150M

16304N200M

16304N250M

20305

20505N100M

20505N150M

20505N200M

20505N300M

20505N350M

25506N100M

25506N150M

25506N200M

25506N300M

25506N350M

32506

32506N150M

32506N200M

32506N300M

035083N075M

035083N080M

040123N100M

060163N050M

060163N100M

060163N125M

065103X28G

075203N125M

075203N150M

080153X19G

080153X19R

080203N050M

080203N100M

090244N125M

090244N175M

100254N050M

100254N100M

100254N150M

100254N200M

120204X14G

120204X14R

120304N100M

120304N150M

120304N200M

160264X11G

160264X11R

160404N150M

160404N200M

160404N250M

200305X11G

200305X11R

200505N150M

200505N200M

200505N300M
Clear

Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Miniature
- Other
Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Pitch (P), Number of Threading(mm)
.02

0.025

0.05

0.08

0.1

0.125

0.15

0.175

0.2

0.225

0.25

0.3

0.35

0.4

0.45

0.5

0.529

0.6

0.63

0.7

0.75

0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00

0.79

0.794

0.8

0.9

0.907

0.974

1

1.058

1.25

1.27

1.5

1.75

2

2.5

3

3.5

4

4.5

5

5.5

6

7

8

9

10

10、11、12、14、16、18、20、24F

11

11 1/2

11.5

12

13

14

16

18

19

20

24

27

28

32

36

40

44

48

56

64

72

80

150
Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- SKS
Details

Clear

Tap Type
- Spiral Tap
- Point tap
- Roll tap
- Hand Tap
- Tap for pipes
- Thread cutter
- Thread-cutting-related tool
- Die
- Tap wrench
- Modification/removal Tool
- Oil Hole Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Chamfer threads (Lcf)
1P

1.5P

2P

2.5

2.5P

3P

3.5P

4P

4.5P

5

5P

6P

7P

8P

9P

10P

11P

12P

13P

14P

16P

18P

20P

24P

28P
Drawing

Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- TiCN
- TiN
- DLC
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Coating Y/N
- Available
- NA
Clear

Overall Length (L)(mm)
30

32

34

36

39

40

41.5

42

44

45

46

48

49

50

51

52

54

55

56

57

58

59

59.5

60

61

61.5

62

64

65

66

67

68

69

70

70/70/70

72

73

74

75

76

78

79

80

82

84

85

86

87

88

89

90

91

92

95

96

99

100

102

103

105

108

109

110

111

113

114

115

120

121

122

125

127

130

135

136

140

145

150

155

160

163

165

170

175

180

185

190

195

200

205

210

220

225

230

250

255

260

300

310

315

350

390

460

500

525

590

780

890

900

1000

1250
Drawing

Clear

Narrow search by specifying Manufacturer

- MISUMI (2)
- Economy series (0)
- YAMAWA MFG (12)
- ISHIHASHI (3)
- OSG (2)
- NOGA JAPAN (0)
- NS TOOL (0)
- KANETEC (0)
- KOKEN (0)
- NIIGATA SEIKI (SK) (0)
- NEW STRONG (0)
- SATA TOOLS (0)
- HITACHIKOKI (0)
- KO-KEN TOOL (0)
- TSUBOSAN (0)
- SKC (0)
- MITSUBISHI HITACHI TOOL (0)
- GUHRING (0)
- ENGINEER (0)
- RENNSTEIG (0)
- RUKO (0)
- UNION TOOL (0)
- NACHI(FUJIKOSHI) (0)
- ONISHI MANUFACTURING (0)
- SANDVIK (0)
- EIKOSHA (0)
- TANOI MFG (0)
- DC SWISS (0)
- ESCO (0)
- LIGHTSEIKI (0)
- TRUSCO NAKAYAMA (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Screw-Hole-Related Tools

- MISUMI Home
- Cutting Tools

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Screw-Hole-Related Tools（Tool Material Type：Cobalt HSS）

Search by specifying the lower class category

Configure

Specification/Dimensions

Screw size (Nominal)

Screw Types

work material

Pitch (P), Number of Threading(mm)

Tool Material Type

Tap Type

Hole type

Chamfer threads (Lcf)

Coating Type

Coating Y/N

Overall Length (L)(mm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Screw-Hole-Related Tools

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Screw-Hole-Related Tools（Tool Material Type：Cobalt HSS）

Search by specifying the lower class category

Configure

Specification/Dimensions

Screw size (Nominal)

Screw Types

work material

Pitch (P), Number of Threading(mm)

Tool Material Type

Tap Type

Hole type

Chamfer threads (Lcf)

Coating Type

Coating Y/N

Overall Length (L)(mm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Screw-Hole-Related Tools

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB