(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Holding Tools for I.D. Tuning（Selfishly：Right-hand Page5）
| Days to Ship |
|
|---|
-
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Standard Price: 4,723,077 IDR- Days to Ship: Quote -
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-STFPR/L-R
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Standard Price: 4,621,538 IDR- Days to Ship: Quote -
Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-STFPR/L-R
SANDVIK
[Features]
A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
For inner-diameter turning (bore cutting) operations with longer protrusions.
For suppressing chattering.Standard Price: 19,489,231 IDR- Days to Ship: Quote -
(Integrated) CoroTurn 111, Boring Tool Bit for Turning
SANDVIK
[Features]Inner diameter boring tool bit with low cutting force. The internal coolant ensures longer insert lifespan and good cutting chip handling. High tool rigidity ensures stable machining operations even with workpieces with long protrusions. Easy-fix sleeve for quick and accurate core height adjustment. For inner diameter turning operations.
Standard Price: 4,621,538 IDR- Days to Ship: Quote -
Boring Tool Bit, CoroTurn 111 Screw Clamp, A/E-SWLPR/LR
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Standard Price: 4,621,538 IDR- Days to Ship: Quote -
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...SWLPR/L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Standard Price: 4,621,538 IDR- Days to Ship: Quote -
Boring Bit CoroTurn RC Double Clamp A-DSKNR/L
SANDVIK
[Features]
A highly-rigid double clamp boring bit for inner diameter lathe turning
Supports the use of internal coolant
High tool rigidity
Supports inner-diameter turning (bore cutting) and the use of negative inserts
Supports everything from roughing through to finishingStandard Price: 9,986,154 IDR- Days to Ship: Quote -
Standard Price: 9,986,154 IDR- Days to Ship: Quote -
Standard Price: 11,635,385 IDR Days to Ship: Quote -
Boring Bit CoroTurn RC Double Clamp A-DWLNR/L
SANDVIK
[Features]
A highly-rigid double clamp boring bit for inner diameter lathe turning
Supports the use of internal coolant
High tool rigidity
Supports inner-diameter turning (bore cutting) and the use of negative inserts
Supports everything from roughing through to finishingStandard Price: 9,986,154 IDR- Days to Ship: Quote -
Standard Price: 9,275,385 IDR Days to Ship: Quote -
Standard Price: 9,275,385 IDR Days to Ship: Quote -
CoroTurn SL 570 Type Cutting Head, CoroTurn 111 Screw Clamp 570-STFPR/L
SANDVIK
[Features]
An interchangeable-head-type cutting head for inner-diameter turning.
The low cutting resistance ensures stable machining operations.
For inner-diameter turning (bore cutting) operations.Standard Price: 8,855,385 IDR- Days to Ship: Quote -
CoroTurn SL, 570 Type T-Max P, Head for Back Boring
SANDVIK
[Features]Cutting head for inner diameter turning with a replaceable head. Excellent insert clamping rigidity due to the double clamping. Quick head changes are possible, reducing downtime. Inner diameter turning operations.
Standard Price: 10,504,615 IDR Days to Ship: Quote -
Standard Price: 10,115,385 IDR- Days to Ship: Quote -
CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DDXNR/L
SANDVIK
[Features]
An interchangeable-head-type cutting head for inner diameter cutting.
Being a double clamp gives it excellent insert-clamping rigidity.
The heads can be quickly changed out, helping reduce down time.
Inner-diameter turning (bore cutting) operations.Standard Price: 10,504,615 IDR Days to Ship: Quote -
CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DSKNR/L
SANDVIK
[Features]
An interchangeable-head-type cutting head for inner diameter cutting.
Being a double clamp gives it excellent insert-clamping rigidity.
The heads can be quickly changed out, helping reduce down time.
Inner-diameter turning (bore cutting) operations.Standard Price: 10,504,615 IDR Days to Ship: Quote -
Standard Price: 10,115,385 IDR- Days to Ship: Quote -
CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DWLNR/L
SANDVIK
[Features]
An interchangeable-head-type cutting head for inner diameter cutting.
Being a double clamp gives it excellent insert-clamping rigidity.
The heads can be quickly changed out, helping reduce down time.
Inner-diameter turning (bore cutting) operations.Standard Price: 10,504,615 IDR Days to Ship: Quote -
CoroTurn SL, 570 Type CoroTurn TR, Head for Turning
SANDVIK
[Features]SL Coupling; extremely high clamping rigidity; T-rail interface minimizes surface roll-off of the restraining surface, maintaining machining accuracy for a long period of time and enabling high-precision machining; for profiling.
Standard Price: 9,695,385 IDR- Days to Ship: Quote -
Standard Price: 10,504,615 IDR Days to Ship: Quote -
Cartridge, CoroTurn 107 Screw Clamp, SRSCR/L
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityStandard Price: 3,625,945 IDR Days to Ship: 8 Day(s) or more -
Cartridge, CoroTurn 107 Screw Clamp, SSKCR/L
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityStandard Price: 3,568,701 IDR- Days to Ship: 8 Day(s) or more -
Cartridge, CoroTurn 107 Screw Clamp, SSSCR/L
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityStandard Price: 3,568,701 IDR Days to Ship: 8 Day(s) or more -
Boring Tool Bit T-Max P Lever Clamp S...-PDUNR/L
SANDVIK
[Features]
An easy-handling inner-diameter boring tool bit with excellent repeatability.
The use of internal coolant improves the handling of cutting chips and gives the inserts a longer service life.
Supports inner-diameter turning (bore cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: 9,986,154 IDR Days to Ship: Quote -
Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-STFCR/L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The bit is made of solid-carbide materials, giving it a higher rigidity than that found with steel tool bits.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Standard Price: 7,336,923 IDR- Days to Ship: 12 Day(s) or more -
Boring Tool Bit, CoroTurn 107, Screw Clamp, F...-STFCR/L
SANDVIK
[Features]
A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
For inner-diameter turning (bore cutting) operations with longer protrusions.
For suppressing chattering.Standard Price: 19,880,000 IDR- Days to Ship: Quote -
CoroTurn SL Shank Adapter 570-NG
SANDVIK
[Features]
An interchangeable-head-type turning bit.
Has fewer tool points making inventory management easy and allowing the selection of multiple types of cutting unit.
For outer diameter turning of all types of work material.Standard Price: 5,481,538 IDR Days to Ship: Quote -
CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-STFCL
SANDVIK
[Features]
An interchangeable-head-type cutting head for inner-diameter turning.
The low cutting resistance ensures stable machining operations.
For inner-diameter turning (bore cutting) operations.Standard Price: 9,275,385 IDR- Days to Ship: Quote -
CoroTurn SL 570 Type Cutting Head, CoroTurn 107 Screw Clamp 570-SVLBR/L
SANDVIK
[Features]
An interchangeable-head-type cutting head for inner-diameter turning.
The low cutting resistance ensures stable machining operations.
For inner-diameter turning (bore cutting) operations.Standard Price: 10,733,846 IDR Days to Ship: Quote -
CoroTurn SL 570 Type Cutting Head, CoroTurn 107 Screw Clamp 570-SVQCR/L
SANDVIK
[Features]
·This is a cutting head for inner diameter turning with a replaceable head
·The low cutting force ensures stable machining operations
[Applications]
·For inner diameter turning operationsStandard Price: 9,907,692 IDR Days to Ship: Quote -
CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-SVUCR/L
SANDVIK
[Features]
An interchangeable-head-type cutting head for inner-diameter turning.
The low cutting resistance ensures stable machining operations.
For inner-diameter turning (bore cutting) operations.Standard Price: 9,275,385 IDR- Days to Ship: Quote -
Standard Price: 5,590,769 IDR Days to Ship: Quote -
SCLC Type Diamond-Shaped 80° Insert-Compatible J-C-SCLCR/L
SANDVIK
An insert that realizes high productivity, high efficiency, and high quality machining solutions
Standard Price: 10,472,308 IDR Days to Ship: Quote -
T-Max P Boring Tool Bit For Turning, CCLNR/L
SANDVIK
First recommendation for general turning for medium to large parts
Inserts with geometries and grades for all machining areasStandard Price: 8,303,855 IDR- Days to Ship: 10 Day(s) or more -
T-Max S Boring Tool Bit For Turning, CTFPR/L
SANDVIK
T-Max S Turning Boring Bits for a Productive, Efficient and Reliable Machining Solution
Standard Price: 6,221,153 IDR Days to Ship: 10 Day(s) or more -
T-Max S Boring Tool Bit For Turning S..CTFPR/L
SANDVIK
A boring tool bit for turning that achieves high productivity, high quality, and high efficiency
Standard Price: 4,690,769 IDR- Days to Ship: Quote -
T-MaxR P Cartridge For Turning, PSKN
SANDVIK
T-Max P Turning Tool Cartridge for a Productive, Efficient and Reliable Machining Solution
Standard Price: 5,068,396 IDR Days to Ship: 8 Day(s) or more -
Cartridge - Round Shank Boring Tool Bit For Positive Inserts, R/L140
SANDVIK
Cartridge for CoroTurn 107 for internal and external turning of slender parts
Standard Price: 2,704,157 IDR- Days to Ship: 8 Day(s) or more -
CoroTurn HP SL Cutting Head PTFNR/L-HP
SANDVIK
CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items
Standard Price: 13,698,462 IDR Days to Ship: Quote -
CoroTurn HP SL Cutting Head, TR-SL-D13UCR/L-HP
SANDVIK
CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items
Standard Price: 8,009,290 IDR- Days to Ship: 8 Day(s) or more -
CoroTurn HP SL Cutting Head, TR-SL-D13XCR/L-HP
SANDVIK
CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items
Standard Price: 8,009,290 IDR- Days to Ship: 8 Day(s) or more -
CoroTurn SL Shank Adapter, 570-R/LF - J/N
SANDVIK
CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items
Standard Price: 3,490,044 IDR Days to Ship: 10 Day(s) or more -
SANDVIK
CoroTurn SL is a modular system of adapters and cutting heads that allows the construction of customized tools for a variety of turning operations with a minimum number of items
Standard Price: 8,913,048 IDR- Days to Ship: 8 Day(s) or more -
SANDVIK
CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items
Standard Price: 8,913,048 IDR- Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Applicable Tip Shape |
| Minimum Processing Diameter φA |
| Application |
| Selfishly |
| Clamp Shape |
| Overall Length L1 |
| Clearance angle |
| Shank Diameter φD |
| Protrusion length (L/D) |
| Lubrication Hole Y/N |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | CoroTurn SL 570 Type Cutting Head, CoroTurn 111 Screw Clamp 570-STFPR/L | CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DDXNR/L | CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DSKNR/L | CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DWLNR/L | CoroTurn SL 570 Type Cutting Head, CoroTurn TR Screw Clamp, TR-SLV13LBR/L | CoroTurn SL 570 Type Cutting Head, CoroTurn 107 Screw Clamp 570-SVLBR/L | CoroTurn SL 570 Type Cutting Head, CoroTurn 107 Screw Clamp 570-SVQCR/L | CoroTurn SL, 570 Type Cutting Head CoroTurn, 107, 570-SVUCR/L | Cartridge - Round Shank Boring Tool Bit For Positive Inserts, R/L140 | ||||||||||||||||||||||||||||||||||||
| Days to Ship | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | Quote | 12 Day(s) or more | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | 10 Day(s) or more | 10 Day(s) or more | Quote | 8 Day(s) or more | 8 Day(s) or more | Quote | 8 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more |
| Applicable Tip Shape | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | T (Triangle) | W (Hexagonal Type) | W (Hexagonal Type) | S (Rectangular) | T (Triangle) | V (35° Diamond-Shaped) | W (Hexagonal Type) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | T (Triangle) | W (Hexagonal Type) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | R (Circular) | S (Rectangular) | S (Rectangular) | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | - | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | T (Triangle) | T (Triangle) | S (Rectangular) | T (Triangle) | T (Triangle) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | - | - | - |
| Minimum Processing Diameter φA | 15 ～ 25 | 8.5 ～ 20 | 13 ～ 16 | 8.5 ～ 33 | 6.5 ～ 12 | 10 ～ 16 | 32 ～ 50 | 32 ～ 63 | 50 | 32 ～ 63 | 25 | 27 | 20 ～ 32 | 50 | 40 ～ 50 | 50 | 50 | 40 ～ 50 | 50 | 33 ～ 50 | 50 | 20 ～ 40 | 40 ～ 55 | 40 ～ 50 | 32 | 8.5 ～ 32 | 13 ～ 16 | - | 25 ～ 50 | 50 | 33 | 27 ～ 33 | 25 | 10 | - | - | 20 mm ～ 32 mm | - | 8 ～ 20 | 50 | 40 ～ 50 | 45 ～ 50 | - | - | - |
| Application | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Inner diameter profiling | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter | Inner diameter profiling | Inner diameter profiling | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Pull | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter | Internal Diameter | Internal Diameter |
| Selfishly | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand |
| Clamp Shape | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Screw-on | Screw-on | Screw-on | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Screw-on | Screw-on | - | - | - | Lever lock | Screw-on | Screw-on | - | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Clamp-on | Clamp-on | Clamp-on | - | Screw-on | Lever lock | Screw-on | Screw-on | - | - | - |
| Overall Length L1 | 125 ～ 250 | 80 ～ 200 | 150 ～ 180 | 100 ～ 300 | 80 ～ 125 | 100 ～ 150 | 300 | 300 ～ 350 | 300 | 300 ～ 350 | - | 19 | 20 | - | - | - | - | - | - | - | - | 25 ～ 50 | 52.2 ～ 66.1 | 50.1 ～ 55.3 | 300 | 100 ～ 270 | - | 111 | - | 32 | 20 | 20 | 150 | 125 | 200 ～ 300 | 400 | 200 mm ～ 300 mm | - | 30 ～ 128 | 35 | 38 | 22 ～ 27 | 134 ～ 135.65 | - | - |
| Clearance angle | 11° | 11° | 11° | 11° | 11° | 11° | 0° | 0° | 0° | 0° | 11° | 11° | 11° | 0° | 0° | 0° | - | 0° | 0° | 5° | 5° | - | - | - | 0° | 7° | 7° | - | 7° | - | - | - | 7° | - | - | - | 11° | - | - | - | - | - | - | - | - |
| Shank Diameter φD | 10 ～ 20 | 6 ～ 16 | 10 ～ 12 | 6 ～ 25 | 5 ～ 10 | 8 ～ 12 | 25 ～ 40 | 25 ～ 50 | 40 | 25 ～ 50 | 20 | 20 | 16 ～ 25 | 40 | 32 ～ 40 | 40 | 40 | 32 ～ 40 | 40 | 25 ～ 40 | 40 | - | - | - | 25 | 6 ～ 25 | 10 ～ 12 | 25 | 20 ～ 40 | 40 | 25 | 20 ～ 25 | 20 | 8 | - | 40 | 16 mm ～ 25 mm | - | - | 40 | 32 ～ 40 | 32 ～ 40 | 32 ～ 40 | - | - |
| Protrusion length (L/D) | 15 ~ 40 ～ 30 ~ 80 | 9 ~ 24 ～ 24 ~ 64 | 60 ~ 100 ～ 72 ~ 120 | 9 ~ 24 ～ 37.5 ~ 100 | 7.5 ~ 20 ～ 15 ~ 40 | 12 ~ 32 ～ 18 ~ 48 | 37.5 ~ 100 ～ 60 ~ 160 | 37.5 ~ 100 ～ 75 ~ 200 | 60 ~ 160 | 37.5 ~ 100 ～ 75 ~ 200 | - | 15 | - | 20 | 32 | 22 | 38 | 36 | 36 | 28 ～ 32 | 32 | - | - | - | 100 | 15 ~ 36 ～ 48 | 60～100 ～ 72～120 | - | 20 ～ 32 | - | 20 | 20 | 30 ~ 80 | 48 | 80 ～ 100 | 80/160 | 32.5 – 64 mm ～ 49 – 100 mm | - | - | - | - | - | - | - | - |
| Lubrication Hole Y/N | Available | Available | NA | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | NA | NA | NA | Available | Available | - | Available | Available | Available | - | Available | Available | NA | - | - | NA | NA | NA | Available | Available | Available | Available | Available | Available |
Loading...
Configure
Specification/Dimensions
-
Applicable Tip Shape
-
Minimum Processing Diameter φA
- 0.3
- 0.5
- 0.6
- 0.9
- 1
- 1.5
- 2
- 2.5
- 3
- 3.2
- 3.5
- 4
- 4.2
- 4.5
- 5
- 5.2
- 5.5
- 6
- 6.2
- 6.5
- 7
- 7.2
- 7.5
- 8
- 8.5
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 20 mm
- 22
- 23
- 25
- 25 mm
- ø25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 32 mm
- ø32
- 33
- 34
- 35
- 40
- 41
- 41.5
- 43
- 44
- ø44
- 45
- 50
- 51
- 53
- 54
- 55
- 56
- 57
- 60
- 62
- ø62
- 63
- 66
- 68
- 69
- 70
- 72
- 80
- 85
- 86
- 88
- ø88
- 90
- 98
- 100
- 105
- 106
- 125
- ø125
- 130
- 136
- 148
- 150
- 175
-
Application
- Internal Diameter
- Inner diameter profiling
- Pull
-
Selfishly
- Right-hand
- Left-hand
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Other
-
Overall Length L1
-
Clearance angle
- 5°
- 7°
- 15°
- 20°
- 0°
- 11°
-
Shank Diameter φD
-
Protrusion length (L/D)
-
Lubrication Hole Y/N
Narrow search by specifying Manufacturer
-
- SANDVIK (101)
- KYOCERA (74)
- SUMITOMO ELECTRIC HARDMETAL (51)
- MITSUBISHI MATERIALS (14)
- TUNGALOY (3)
- BIG DAISHOWA SEIKI (1)
- SHOWA TOOL (0)
- NOGA JAPAN (0)
- MANYO TOOLS (0)
- ISCAR (0)
- THE CUT (0)
CAD
-
- 2D
- 3D
Related Categories to Holding Tools for I.D. Tuning
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy