(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Turning Inserts（work material：Heat-resistant alloy, titanium alloy）
[What is turning?]
A shape is created by rotating the work material and cutting the surface while pressing the cutting edge. Processing methods can be divided into outer diameter processing, threading, inner diameter processing, and cut-off processing. The model numbers written on the insert and holder are codes unique to each tool manufacturer. Understanding how to read the model number provides basic information such as shape, type, and size. In many cases, cutting conditions are written on the label of the insert case, so check it before use.
| Days to Ship |
|
|---|
-
Tip (Square Groove Grooving Tip TGA Type) TGAR
SUMITOMO ELECTRIC HARDMETAL
Insert for cutting tools.
Standard Price: 262,141 IDR- Days to Ship: 8 Day(s) or more -
55° Diamond-Shape With Hole, Negative, DNMG-EF, For Finish Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]
· Breaker for finishing with excellent chip control.Standard Price: 127,684 IDR- Days to Ship: 8 Day(s) or more -
Replacement Blade Insert T (Triangle) TNGG-R-FY
SUMITOMO ELECTRIC HARDMETAL
[Specifications]・Breaker symbol: FY・Shape: T (triangle)・Groove・Hole: G (with hole)・Relief angle: Negative 0° (N)・Application (breaker): Finish cutting
Standard Price: 174,592 IDR- Days to Ship: 8 Day(s) or more -
Replacement Blade Insert W (Hexagonal) WBGT-L-FY
SUMITOMO ELECTRIC HARDMETAL
A hexagonal-shaped insert.
Standard Price: 180,064 IDR Days to Ship: 8 Day(s) or more -
Standard Price: 1,120,103 IDR- Days to Ship: 8 Day(s) or more -
Sumi Boron Chip T (Triangle) 3NU-TNGA
SUMITOMO ELECTRIC HARDMETAL
Unique CBN sintered tool (Sumiboron) insert. It possesses high hardness and exceptional heat resistance compared to conventional tool material.
Standard Price: 926,266 IDR Days to Ship: 8 Day(s) or more -
Sumi Boron Chip D (55° Rhombus) NU-DNMA
SUMITOMO ELECTRIC HARDMETAL
Unique CBN sintered tool (Sumiboron) insert. It possesses high hardness and exceptional heat resistance compared to conventional tool material.
Standard Price: 437,099 IDR Days to Ship: 8 Day(s) or more -
Standard Price: 119,244 IDR- Days to Ship: 8 Day(s) or more -
Square-Shape With Hole, Negative, SNMG-GU, For Medium Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]
· Wear-resistant, general-purpose breaker with low resistance.Standard Price: 119,244 IDR Days to Ship: 8 Day(s) or more -
M Class Insert (with out Breaker) TCMT○○○
MITSUBISHI MATERIALS
Achieves reliable control even with latter-half materials that have easily elongated chips
Standard Price: 344,615 IDR Days to Ship: Quote -
Standard Price: 387,692 IDR- Days to Ship: 12 Day(s) or more -
M-Class Insert 80°, CN With Hole, ○○-Type CNMG-RS
MITSUBISHI MATERIALS
[Features]
· For rough cutting.Standard Price: 183,077 IDR- Days to Ship: 12 Day(s) or more -
Sumi Boron Chip V (35° Rhombus) NU-VNMA
SUMITOMO ELECTRIC HARDMETAL
Adopts an ultra-smooth TiAlN-based coating to reduce cutting resistance, improve abrasion resistance, and enable vastly improved chip disposal
Standard Price: 387,307 IDR- Days to Ship: 8 Day(s) or more -
80° Diamond-Shape With Hole, Negative, CNMG-EG, For Medium Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]
· General-purpose breaker featuring both high chip control as well as damage resistance.Standard Price: 95,551 IDR- Days to Ship: 8 Day(s) or more -
Replacement Blade Insert T (Triangle) TBGT-L-FY
SUMITOMO ELECTRIC HARDMETAL
A triangle-shaped insert.
Standard Price: 180,064 IDR- Days to Ship: 8 Day(s) or more -
Replacement Blade Insert T (Triangle) TNGG-L-FY
SUMITOMO ELECTRIC HARDMETAL
A triangle-shaped insert.
Standard Price: 174,592 IDR Days to Ship: 8 Day(s) or more -
Lathe Turning (1-Corner Specification) Diamond
KYOCERA
Conventional insert mounting to new holders is not recommended.
Standard Price: 2,260,085 IDR- Days to Ship: 9 Day(s) or more -
Standard Price: 180,064 IDR- Days to Ship: 8 Day(s) or more -
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium to Heavy CuttingStandard Price: 164,060 IDR Days to Ship: 9 Day(s) or more -
60° Triangle Positive with Hole TPGH "Finishing"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 3
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: 155,595 IDR- Days to Ship: 8 Day(s) or more -
60° Triangle Positive with Hole TPGH○○-H "Medium Cutting"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 3
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: 155,595 IDR- Days to Ship: 10 Day(s) or more -
60° Triangle Positive with Hole TPGB without Breaker "Cast Iron"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 3
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: 132,892 IDR- Days to Ship: 9 Day(s) or more -
80° Hexagon Type Positive with Hole WBGT "Finishing"
KYOCERA
[Specifications]
· Shape: W (Hexagon)
· Number of Available Corners: 3
· Rake Angle: Positive
· Handedness: Left-handed
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: 186,557 IDR Days to Ship: 8 Day(s) or more -
Standard Price: 437,783 IDR- Days to Ship: 8 Day(s) or more -
Standard Price: 154,301 IDR Days to Ship: 8 Day(s) or more -
Blade Tip Replacement Tip S (Square) SPGN
SUMITOMO ELECTRIC HARDMETAL
[Specifications]
·Chip Breaker Symbol: None
·Shape: (square)
· Groove
·Holes: N (No hole)
·Relief angle: Positive 11° (P) [Grade Features]
·BN250 is a general-purpose grade that has optimized CBN sintered compact composition and improved a balance of abrasion resistance and wear resistance.
·BN500 has an excellent balance of wear resistance and abrasion resistance, so it can achieve long tool lifespan in high-speed
·and high-precision machining of high grade cast iron such as ductile cast iron in particular.
·BN500 has an excellent balance of wear resistance and abrasion resistance, so it can achieve long tool lifespan in high-speed
·and high-precision machining of high grade cast iron such as ductile cast iron in particular.
·BN700 is one of grades that have the highest hardness and toughness in the SUMIBORON series, and has balanced abrasion resistance and wear resistance when cutting sintered alloys and cast iron, etc.
·BNX20 is a grade that demonstrates its power in high-efficiency machining.
·DA150 is a grade with an excellent balance of machinability and abrasion resistance, as the diamond particles are strongly bonded to each other.
·T1200A is a cermet grade with high abrasion resistance for finishing to medium-rough cutting of general steel.Standard Price: 194,883 IDR- Days to Ship: 8 Day(s) or more -
Blade Tip Replacement Tip T (Triangle) TPGW
SUMITOMO ELECTRIC HARDMETAL
[Specifications]
·Chip Breaker Symbol: None
· Shape: T (Triangle)
· Groove
·Holes: W (With holes)
·Relief angle: Positive 11° (P) [Grade Features]
·BN250 is a general-purpose grade that has optimized CBN sintered compact composition and improved a balance of abrasion resistance and wear resistance.
·BN500 has an excellent balance of wear resistance and abrasion resistance, so it can achieve long tool lifespan in high-speed
·and high-precision machining of high grade cast iron such as ductile cast iron in particular.
·BN500 has an excellent balance of wear resistance and abrasion resistance, so it can achieve long tool lifespan in high-speed
·and high-precision machining of high grade cast iron such as ductile cast iron in particular.
·BN700 is one of grades that have the highest hardness and toughness in the SUMIBORON series, and has balanced abrasion resistance and wear resistance when cutting sintered alloys and cast iron, etc.
·DA150 is a grade with an excellent balance of machinability and abrasion resistance, as the diamond particles are strongly bonded to each other.
·T1200A is a cermet grade with high abrasion resistance for finishing to medium-rough cutting of general steel.Standard Price: 129,678 IDR- Days to Ship: 8 Day(s) or more -
Standard Price: 90,864 IDR- Days to Ship: 8 Day(s) or more -
Sumi Boron Chip S (Square) NU-SNMA
SUMITOMO ELECTRIC HARDMETAL
Unique CBN sintered tool (Sumiboron) insert. It possesses high hardness and exceptional heat resistance compared to conventional tool material.
Standard Price: 455,934 IDR Days to Ship: 8 Day(s) or more -
Sumi Boron Chip T (Triangle) T-3NU-TNGA
SUMITOMO ELECTRIC HARDMETAL
Unique CBN sintered tool (Sumiboron) insert. It possesses high hardness and exceptional heat resistance compared to conventional tool material.
Standard Price: 807,329 IDR Days to Ship: 8 Day(s) or more -
Tip (SEC - Mini Tool SBT/PBT Type)
SUMITOMO ELECTRIC HARDMETAL
Lineups include various cutting edge replaceable tool inserts.
Standard Price: 310,247 IDR Days to Ship: 8 Day(s) or more -
Insert (For SEC-Grooving Tool Bit GND Type)
SUMITOMO ELECTRIC HARDMETAL
An insert for a variety of replaceable tool bits.
Standard Price: 234,326 IDR- Days to Ship: 8 Day(s) -
Insert (For SEC-Grooving Tool Bit GND Type)
SUMITOMO ELECTRIC HARDMETAL
An insert for a variety of replaceable tool bits.
Standard Price: 210,843 IDR- Days to Ship: 8 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
An insert for a variety of replaceable tool bits.
Standard Price: 283,572 IDR- Days to Ship: 8 Day(s) or more -
Standard Price: 262,141 IDR- Days to Ship: 8 Day(s) or more -
Standard Price: 233,414 IDR- Days to Ship: 8 Day(s) or more -
80° Diamond-Shape With Hole, Positive 7°, CCMT-SU, For Light Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]
· General-purpose breaker with excellent sharpness.Standard Price: 88,800 IDR Days to Ship: 8 Day(s) or more -
80° Diamond-Shape With Hole, Negative, CNMG-MU, For Medium To Rough Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]
· An economical, double-sided breaker with low resistance, suitable for high-feed machining.Standard Price: 103,507 IDR- Days to Ship: 8 Day(s) or more -
80° Diamond-Shape With Hole, Negative, CNMG-SU, For Finish Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]
· Breaker with proven performance for small cutting and high feed rates.Standard Price: 103,507 IDR- Days to Ship: 8 Day(s) or more -
55° Diamond-Shape With Hole, Negative, DNMG-EG, For Medium Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]
· General-purpose breaker featuring both high chip control as well as damage resistance.Standard Price: 126,714 IDR- Days to Ship: 8 Day(s) or more -
55° Diamond-Shape With Hole, Negative, DNMG-SU, For Finish Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]
· Proven performance for small cutting and high feed rates.Standard Price: 138,341 IDR Days to Ship: 8 Day(s) or more -
Standard Price: 138,341 IDR Days to Ship: 8 Day(s) or more -
Triangle-Shape With Hole, Positive 7°, TCMT-SU, For Light Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]
· General-purpose breaker with excellent sharpness.Standard Price: 90,864 IDR Days to Ship: 8 Day(s) or more -
Triangle-Shape With Hole, Negative, TNMG-HM, For Medium To Rough Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]
· Wide-width, low-resistance, M-class breaker with right/left-handedness, for medium to rough cutting.Standard Price: 103,507 IDR Days to Ship: 8 Day(s) or more -
Triangle-Shape With Hole, Negative, TNMG-EF, For Finish Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]
· Breaker for finishing with excellent chip control.Standard Price: 94,477 IDR- Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Shape |
| work material |
| Application |
| Available corners |
| Breaker Use |
| Rake angle |
| Nose R |
| Selfishly |
| Groove Width (For Grooving / Plunging) |
| Pitch (for Threading) |
| O.D./ I.D. (For Threading) |
| Screw Types (for threading) |
| Number of threads (for threading) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | WIDIA | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | MITSUBISHI MATERIALS | SANDVIK | MITSUBISHI MATERIALS | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | KYOCERA | SANDVIK | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | NGK SPARK PLUG | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL |
| Product Series | 55° Diamond-Shape With Hole, Negative, DNMG-EF, For Finish Cutting | Square-Shape With Hole, Negative, SNMG-GU, For Medium Cutting | 80° Diamond-Shape With Hole, Negative, CNMG-EG, For Medium Cutting | 60° Triangle Positive with Hole TPGB without Breaker "Cast Iron" | 80° Diamond-Shape With Hole, Positive 7°, CCMT-SU, For Light Cutting | 80° Diamond-Shape With Hole, Negative, CNMG-MU, For Medium To Rough Cutting | 80° Diamond-Shape With Hole, Negative, CNMG-SU, For Finish Cutting | 55° Diamond-Shape With Hole, Negative, DNMG-EG, For Medium Cutting | 55° Diamond-Shape With Hole, Negative, DNMG-SU, For Finish Cutting | Triangle-Shape With Hole, Positive 7°, TCMT-SU, For Light Cutting | Triangle-Shape With Hole, Negative, TNMG-HM, For Medium To Rough Cutting | Triangle-Shape With Hole, Negative, TNMG-EF, For Finish Cutting | |||||||||||||||||||||||||||||||||
| Days to Ship | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | Quote | 12 Day(s) or more | 12 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more |
| Shape | T (Triangle) | D (55° Diamond-Shape) | T (Triangle) | W (Hexagonal Type) | C (80° Diamond-Shape) | T (Triangle) | D (55° Diamond-Shape) | S (Rectangular) | S (Rectangular) | T (Triangle) | Other | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | T (Triangle) | T (Triangle) | Other | D (55° Diamond-Shape) | C (80° Diamond-Shape) | T (Triangle) | T (Triangle) | T (Triangle) | W (Hexagonal Type) | Other | S (Rectangular) | S (Rectangular) | T (Triangle) | T (Triangle) | S (Rectangular) | T (Triangle) | Other | Other | Other | Other | T (Triangle) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | T (Triangle) |
| work material | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy |
| Application | Grooving / Parting | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Grooving / Parting | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Grooving / Parting | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Grooving / Parting | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Other | Grooving / Parting | Other | Grooving / Parting | Grooving / Parting | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter |
| Available corners | - | - | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | 1 | 2 | 4 | 3 | 3 | 3 | 3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Breaker Use | - | Finish | Finish | Finish | - | - | - | - | Medium grinding | Medium grinding | - | Rough cutting | - | Medium grinding | Finish | Finish | - | Finish / Medium grinding | Medium to deep grinding | Finish | Medium grinding | Medium grinding | Finish | - | Medium grinding | - | - | Medium grinding | - | - | - | - | - | - | - | Finish | - | - | Finish | Medium grinding | Finish | - | - | - | Finish |
| Rake angle | - | Negative | Negative | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Pozidriv | - | Negative | Negative | Negative | Pozidriv | Negative | Pozidriv | Pozidriv | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | - | Negative | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | - | - | - | - | - | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Negative | Pozidriv | Negative | Negative |
| Nose R | 0.2 ～ Other | 0.4 ～ 0.8 | 0.2 ～ 0.8 | 0.2 ～ 0.4 | - | 0.4 ～ 1.2 | 0.4 ～ 1.2 | 0.4 ～ 1.2 | 0.4 ～ 1.2 | 0.4 | 0.2 | 1.2 ～ 1.6 | 0.4 ～ 0.8 | 0.8 ～ 1.2 | 0.2 ～ Other | 0.2 ～ 0.8 | 0.2 ～ Other | 0.4 ～ Other | 0.4 ～ 0.8 | 0.2 ～ Other | 0.2 ～ 0.8 | 0.2 ～ Other | 0.2 ～ Other | Other | 0.8 ～ Other | 0.4 ～ 0.8 | 0.4 | 0.4 ～ 1.2 | 0.4 ～ 1.2 | 0.4 ～ 0.8 | Other | 0.4 ～ 0.8 | 0.2 ～ Other | Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ 0.8 | 0.8 ～ 1.6 | 0.2 ～ 1.2 | 0.8 ～ 1.2 | 0.2 ～ 0.8 | 0.4 ～ 1.2 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.4 ～ 0.8 |
| Selfishly | Right-hand | No-hand | Right-hand | Left-hand | - | - | - | No-hand | No-hand | - | No-hand | - | - | No-hand | Left-hand | Left-hand | Right-hand / Left-hand / No-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | - | - | - | - | - | - | Right-hand | Right-hand | Right-hand | Right-hand | Left-hand | Right-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | Left-hand | No-hand |
| Groove Width (For Grooving / Plunging) | - | - | - | - | - | - | - | - | - | - | 2.7mm ～ 3.8mm | - | - | - | - | - | 3 ～ 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch (for Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D./ I.D. (For Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Types (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of threads (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Shape
- C (80° Diamond-Shape)
- D (55° Diamond-Shape)
- R (Circular)
- S (Rectangular)
- T (Triangle)
- V (35° Diamond-Shaped)
- W (Hexagonal Type)
- Other
-
work material
- Steel
- Stainless Steel
- Cast Iron
- Non-ferrous metal
- Heat-resistant alloy, titanium alloy
- High Hardness Material
-
Application
- Outer Diameter/Inner Diameter
- Grooving / Parting
- Threading
- Other
-
Available corners
- 1
- 2
- 3
- 4
- 6
- 8
- 9 or more
-
Breaker Use
- Finish
- Medium grinding
- Medium to deep grinding
- Heavy cutting
- Light Cutting
- Rough cutting
- Medium to coarse grinding
-
Rake angle
- Negative
- Pozidriv
-
Nose R
-
Selfishly
-
Groove Width (For Grooving / Plunging)
-
Pitch (for Threading)
-
O.D./ I.D. (For Threading)
-
Screw Types (for threading)
-
Number of threads (for threading)
Narrow search by specifying Manufacturer
-
- SUMITOMO ELECTRIC HARDMETAL (200)
- KYOCERA (162)
- NGK SPARK PLUG (54)
- SANDVIK (27)
- MITSUBISHI MATERIALS (6)
- ISCAR (4)
- OSG (2)
- BIG DAISHOWA SEIKI (1)
- TUNGALOY (1)
- WIDIA (1)
- MITSUBISHI HITACHI TOOL (0)
- SANWA SEISAKUSYO (0)
- NOGA JAPAN (0)
- KOSHUHA (0)
CAD
-
- 2D
- 3D
Related Categories to Turning Inserts
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy