(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Square End Mills (HSS)（Machining Application：Side）

162 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less

1
2
3
4
Next >>

Super Hard, 4-Flute 4SE

NACHI(FUJIKOSHI)

A general-purpose end mill that can process anything from steel to stainless steel and aluminum. Suitable for side surface machining.

Standard Price:	278,756 IDR-
Days to Ship:	8 Day(s) or more

G Standard End Mill, 4-Flute 4GE

NACHI(FUJIKOSHI)

It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum. Suitable for side surface machining.

Standard Price:	371,659 IDR-
Days to Ship:	8 Day(s) or more

Super Hard, 2-Flute 2SE

NACHI(FUJIKOSHI)

A general-purpose end mill that can process anything from steel to stainless steel and aluminum.

Standard Price:	251,100 IDR-
Days to Ship:	8 Day(s) or more

G Standard End Mill, 2-Flute 2GE

NACHI(FUJIKOSHI)

[Features]
· It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum.
· It is suitable for side processing

Standard Price:	332,100 IDR-
Days to Ship:	8 Day(s) or more

TiN Coating, End Mill (multi-flute short type) EX-TIN-EMS

OSG

[Features]
· Adopts TiN coating with excellent weld resistance and abrasion resistance.
· Those with outer diameter of 41 mm or more have center holes.

Standard Price:	292,998 IDR-
Days to Ship:	2 Day(s) or more

Super Hard, Long 4-Flute SL4SE

NACHI(FUJIKOSHI)

General purpose end mill. Suitable for side processing of wide side surfaces and deep positions.

Standard Price:	389,962 IDR-
Days to Ship:	8 Day(s) or more

2-flute, General-purpose, Short Type EDS

OSG

High-speed steel square series.
Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/Copper
Coating: uncoated, standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2
Helix angle: Standard helix (30 to 44°)

STOCK

Standard Price:	186,603 IDR-
Days to Ship:	1 Day(s) or more

V Coating XPM End Mill (2-flute short type) V-XPM-EDS

OSG

Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

Standard Price:	564,927 IDR-
Days to Ship:	2 Day(s) or more

ESM End Mill, 4-Flute / Regular Flute Length 4ESMR□□.□

MITSUBISHI HITACHI TOOL

MOLDINO HSS square end mill. The base material is powder metal high-speed steel.

Standard Price:	744,615 IDR-
Days to Ship:	12 Day(s) or more

NK End Mill, 2-Flute and Regular Length, 2NKR□□.□

MITSUBISHI HITACHI TOOL

MOLDINO HSS square end mill. The base material is cobalt high-speed steel.

Standard Price:	435,385 IDR-
Days to Ship:	8 Day(s) or more

2-flute, General-purpose, Long Type EDL

OSG

General-purpose 2-flute end mill long type using cobalt high-speed steel as the base material. Suitable for deep cuts.

Standard Price:	222,623 IDR-
Days to Ship:	2 Day(s) or more

Short Type, 4-Flute Multi-Flute Center Cut CC-EMS

OSG

Cobalt high-speed steel center cut.
Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/Copper
Coating: Uncoated, Standard/Alteration Category: Manufacturer's standard product, Number of flutes (pcs.): 4
Helix angle: Standard helix (30 to 44°)

Standard Price:	206,732 IDR-
Days to Ship:	Same day or more

End Mill (Multi-Flute Center Cut Long Type) CC-EML

OSG

General-purpose 4-flute end mill center cut long type using cobalt high-speed steel as the base material. Suitable for deep cuts.

Standard Price:	397,112 IDR-
Days to Ship:	2 Day(s) or more

XPM End Mill (4-Flute Deep-Engraving Short Type) DE-XPM-EMS

OSG

Long shank end mill with 4 flutes for deep engraving. The shank diameter is designed to be thinner than the blade diameter.

Standard Price:	685,293 IDR-
Days to Ship:	8 Day(s) or more

ESM End Mill (for Stainless Steel) 2ESMSUS□□

MITSUBISHI HITACHI TOOL

[Applications]It can be used for side milling, counterbore milling, grooving, roughing, semi-finishing, and finishing. [Features]Powder metal high-speed steel with excellent abrasion resistance and toughness is used.

Standard Price:	502,616 IDR-
Days to Ship:	8 Day(s) or more

3S End Mill, 2-Flute Long Blade

FUKUDA

Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes

Standard Price:	374,945 IDR-
Days to Ship:	8 Day(s) or more

3S End Mill, 4-Flute (Standard Blade)

FUKUDA

Side cutting and groove re-polishing are easy

Standard Price:	328,435 IDR-
Days to Ship:	8 Day(s) or more

Long Shank End Mill 4 Blades

FUKUDA

Long shank / center-cut for deep engraving and blind holes

Standard Price:	572,841 IDR-
Days to Ship:	8 Day(s) or more

NK End Mill, 3-Flute, Regular Flute Length, Center Cut 4NKRC□□.□

MITSUBISHI HITACHI TOOL

MOLDINO HSS square end mill. The base material is cobalt high-speed steel.

Standard Price:	480,000 IDR-
Days to Ship:	8 Day(s) or more

AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short

MISUMI

[Features]
·High speed steel powder square short blade length 2-flute type that can expect for durability
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS
2 Flutes
S (Short)

Standard Price:	303,364 IDR-
Days to Ship:	8 Day(s) or more

AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular

MISUMI

[Features]
·High speed steel powder square regular blade length 2-flute type that can expect for durability
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS
2 Flutes
R (Regular)

Standard Price:	313,283 IDR-
Days to Ship:	8 Day(s) or more

AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

MISUMI

[Features]
·High speed steel powder square long blade length type that can expect for durability
·Suitable for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS
2 Flutes
L (Long)

Standard Price:	338,339 IDR-
Days to Ship:	8 Day(s) or more

AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short

MISUMI

AS coating with excellent wear resistance achieves the high-precision finish even in prolonged processing

Volume Discount

AS
4 Flutes
S (Short)

Standard Price:	320,447 IDR-
Days to Ship:	8 Day(s) or more

AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular

MISUMI

[Features]
·Achieving high durability in a wide range of materials, from raw materials to heat-treated steel
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS
4 Flutes
R (Regular)

Standard Price:	338,048 IDR-
Days to Ship:	8 Day(s) or more

AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long

MISUMI

Volume Discount

AS
4 Flutes
L (Long)

Standard Price:	358,178 IDR-
Days to Ship:	8 Day(s) or more

TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short

MISUMI

[Features]
·High speed steel powder roughing short flute length type that can expect for durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TiCN
2 Flutes
S (Short)

Standard Price:	234,464 IDR-
Days to Ship:	8 Day(s) or more

TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular

MISUMI

[Features]
·High speed steel powder roughing regular flute length type that can expect for durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TiCN
2 Flutes
R (Regular)

Standard Price:	233,654 IDR-
Days to Ship:	8 Day(s) or more

TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

MISUMI

[Features]
·High speed steel powder roughing long flute length type that can expect durability
·Suitable for deep cavity milling
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TiCN
2 Flutes
L (Long)

Standard Price:	201,417 IDR-
Days to Ship:	8 Day(s) or more

TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short

MISUMI

Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

Volume Discount

TiCN
4 Flutes
S (Short)

Standard Price:	209,683 IDR-
Days to Ship:	8 Day(s) or more

TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular

MISUMI

[Features]
·High speed steel powder roughing regular flute length 4-flute type that can expect for durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TiCN
4 Flutes
R (Regular)

Standard Price:	209,683 IDR-
Days to Ship:	8 Day(s) or more

TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular

MISUMI

[Features]
·High speed steel powder roughing long flute length 4-flute type that can expect for durability
·Suitable for deep cavity milling
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TiCN
4 Flutes
L (Long)

Standard Price:	218,041 IDR-
Days to Ship:	8 Day(s) or more

AS Coated High-Speed Steel Square End Mill, 2-Flute, Short

MISUMI

[Features]
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS
2 Flutes
S (Short)

Standard Price:	228,402 IDR-
Days to Ship:	8 Day(s) or more

AS Coated High-Speed Steel Square End Mill, 2-Flute / Regular

MISUMI

Volume Discount

AS
2 Flutes
R (Regular)

Standard Price:	236,634 IDR-
Days to Ship:	8 Day(s) or more

AS Coated High-Speed Steel Square End Mill, 2-Flute / Long

MISUMI

[Features]
·Suitable for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS
2 Flutes
L (Long)

Standard Price:	265,369 IDR-
Days to Ship:	8 Day(s) or more

AS Coated High-Speed Steel Square End Mill, 4-Flute / Short

MISUMI

Volume Discount

AS
4 Flutes
S (Short)

Standard Price:	242,731 IDR-
Days to Ship:	8 Day(s) or more

AS Coated High-Speed Steel Square End Mill, 4-Flute / Regular

MISUMI

Volume Discount

AS
4 Flutes
R (Regular)

Standard Price:	263,963 IDR-
Days to Ship:	8 Day(s) or more

AS Coated High-Speed Steel Square End Mill, 4-Flute / Long

MISUMI

Volume Discount

AS
4 Flutes
L (Long)

Standard Price:	290,722 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill, 2-Flute, Short / Non-Coated Model

MISUMI

[Features]
·High speed steel powder square uncoated short flute length 2-flute type that can expect for durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
S (Short)

Standard Price:	217,397 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

MISUMI

[Features]
·High speed steel powder square uncoated regular flute length 2-flute type that can expect for durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
R (Regular)

Standard Price:	228,144 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model

MISUMI

[Features]
·Uncoated long flute length 2-flute type of high speed steel powder square that can expect for durability
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
L (Long)

Standard Price:	255,421 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model

MISUMI

[Features]
·High speed steel powder square uncoated short flute length 4-flute type that expect for durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
S (Short)

Standard Price:	236,685 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill 4-Flute / Regular / Non-Coated Type

MISUMI

[Features]
·High speed steel powder square uncoated regular flute length 4-flute type that can expect for durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
R (Regular)

Standard Price:	244,400 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill 4-Flute / Long / Non-Coated Type

MISUMI

[Features]
·Powdered high speed steel powder square uncoated long flute length 4-flute type that can expect for durability
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
L (Long)

Standard Price:	277,465 IDR-
Days to Ship:	8 Day(s) or more

High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model

MISUMI

[Features]
·High-speed steel uncoated square short flute length 2-flute type with up to ø50
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
S (Short)

Standard Price:	133,619 IDR-
Days to Ship:	8 Day(s) or more

High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

MISUMI

[Features]
·High-speed steel uncoated square regular blade length 2-flute type with up to ø50
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
R (Regular)

Standard Price:	153,811 IDR-
Days to Ship:	8 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Machining Application
Coating
Blade shape type
Torsion Angle (θ)
Base Blade Y/N
Tool Material Type
Underneck length (ℓ1)(mm)
shank


Brand	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	NACHI(FUJIKOSHI)	OSG	OSG	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	OSG	OSG	OSG	OSG	MITSUBISHI HITACHI TOOL	FUKUDA	FUKUDA	FUKUDA	MITSUBISHI HITACHI TOOL	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Super Hard, 4-Flute 4SE	G Standard End Mill, 4-Flute 4GE	Super Hard, 2-Flute 2SE	G Standard End Mill, 2-Flute 2GE	TiN Coating, End Mill (multi-flute short type) EX-TIN-EMS	Super Hard, Long 4-Flute SL4SE	2-flute, General-purpose, Short Type EDS	V Coating XPM End Mill (2-flute short type) V-XPM-EDS	ESM End Mill, 4-Flute / Regular Flute Length 4ESMR□□.□	NK End Mill, 2-Flute and Regular Length, 2NKR□□.□	2-flute, General-purpose, Long Type EDL	Short Type, 4-Flute Multi-Flute Center Cut CC-EMS	End Mill (Multi-Flute Center Cut Long Type) CC-EML	XPM End Mill (4-Flute Deep-Engraving Short Type) DE-XPM-EMS	ESM End Mill (for Stainless Steel) 2ESMSUS□□	3S End Mill, 2-Flute Long Blade	3S End Mill, 4-Flute (Standard Blade)	Long Shank End Mill 4 Blades	NK End Mill, 3-Flute, Regular Flute Length, Center Cut 4NKRC□□.□	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular	AS Coated High-Speed Steel Square End Mill, 2-Flute, Short	AS Coated High-Speed Steel Square End Mill, 2-Flute / Regular	AS Coated High-Speed Steel Square End Mill, 2-Flute / Long	AS Coated High-Speed Steel Square End Mill, 4-Flute / Short	AS Coated High-Speed Steel Square End Mill, 4-Flute / Regular	AS Coated High-Speed Steel Square End Mill, 4-Flute / Long	Powdered High-Speed Steel Square End Mill, 2-Flute, Short / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model	Powdered High-Speed Steel Square End Mill 4-Flute / Regular / Non-Coated Type	Powdered High-Speed Steel Square End Mill 4-Flute / Long / Non-Coated Type	High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model	High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model
Days to Ship	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	2 Day(s) or more	8 Day(s) or more	1 Day(s) or more	2 Day(s) or more	12 Day(s) or more	8 Day(s) or more	2 Day(s) or more	Same day or more	2 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more
Specifications							STOCK													AS 2 Flutes S (Short)	AS 2 Flutes R (Regular)	AS 2 Flutes L (Long)	AS 4 Flutes S (Short)	AS 4 Flutes R (Regular)	AS 4 Flutes L (Long)	TiCN 2 Flutes S (Short)	TiCN 2 Flutes R (Regular)	TiCN 2 Flutes L (Long)	TiCN 4 Flutes S (Short)	TiCN 4 Flutes R (Regular)	TiCN 4 Flutes L (Long)	AS 2 Flutes S (Short)	AS 2 Flutes R (Regular)	AS 2 Flutes L (Long)	AS 4 Flutes S (Short)	AS 4 Flutes R (Regular)	AS 4 Flutes L (Long)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 2 Flutes L (Long)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 4 Flutes L (Long)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)
Blade diameter (D)(φ)	2.5 ～ 50	2.5 ～ 50	1 ～ 50	1 ～ 50	2.5 ～ 50	3 ～ 40	0.45 ～ 60	1 ～ 40	3 ～ 30	2 ～ 40	0.8 ～ 40	2.5 ～ 40	3 ～ 40	8 ～ 50	1.5 ～ 30	3 ～ 50	3 ～ 100	3 ～ 50	2.5 ～ 40	1 ～ 40	1 ～ 25	3 ～ 20	3 ～ 25	3 ～ 25	3 ～ 25	1 ～ 40	1 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	1 ～ 50	1 ～ 25	3 ～ 40	3 ～ 38	3 ～ 30	3 ～ 40	1 ～ 40	1 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	1 ～ 50	1 ～ 25
Blade length (ℓ)(mm)	7 ～ 70	7 ～ 70	2 ～ 70	2 ～ 70	7 ～ 75	15 ～ 125	1.1 ～ 80	2.5 ～ 65	10 ～ 55	5 ～ 65	6 ～ 110	10 ～ 65	15 ～ 110	20 ～ 75	4 ～ 55	15 ～ 120	13 ～ 80	30 ～ 120	7 ～ 65	2.5 ～ 65	3.5 ～ 60	15 ～ 75	8 ～ 45	12 ～ 68	15 ～ 90	2.5 ～ 65	3.5 ～ 60	15 ～ 90	8 ～ 45	12 ～ 68	15 ～ 90	2.5 ～ 75	3.5 ～ 60	15 ～ 110	8 ～ 65	12 ～ 68	15 ～ 110	2.5 ～ 65	3.5 ～ 60	15 ～ 90	8 ～ 45	12 ～ 68	15 ～ 90	2.5 ～ 75	3.5 ～ 60
Shank diameter (d)(mm)	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 32	6 ～ 42	6 ～ 32	6 ～ 25	6 ～ 32	6 ～ 32	6 ～ 32	6 ～ 32	6 ～ 42	6 ～ 25	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 20	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 42	6 ～ 25	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 42	6 ～ 25
Number of flutes(sheet)	4	4	2	2	4 ～ 6	4	2	2	4	2	2	4	4	4	2	2	4	4	4	2	2	2	4	4	4	2	2	2	4	4	4	2	2	2	4	4	4	2	2	2	4	4	4	2	2
Overall Length (L)(mm)	50 ～ 160	50 ～ 160	50 ～ 160	50 ～ 160	50 ～ 165	60 ～ 210	45 ～ 170	50 ～ 165	55 ～ 125	55 ～ 165	50 ～ 195	50 ～ 150	60 ～ 195	80 ～ 350	50 ～ 125	53 ～ 215	51 ～ 180	100 ～ 300	55 ～ 165	45 ～ 150	45 ～ 130	60 ～ 140	52 ～ 121	55 ～ 144	60 ～ 160	45 ～ 150	45 ～ 130	60 ～ 160	52 ～ 121	55 ～ 144	60 ～ 160	45 ～ 165	45 ～ 130	60 ～ 195	52 ～ 150	55 ～ 144	60 ～ 195	45 ～ 150	45 ～ 130	60 ～ 160	52 ～ 121	55 ～ 144	60 ～ 160	45 ～ 165	45 ～ 130
work material	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	general steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	general steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Machining Application	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side
Coating	Non-Coated	TiN	Non-Coated	TiN	TiN	Non-Coated	Non-Coated	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Blade shape type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Base Blade Y/N	-	-	-	-	-	-	-	-	Available	Available	-	-	-	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Tool Material Type	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Alloy HSS	Alloy HSS	Alloy HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	-	-	-	Straight	-	Straight	Straight	-	-	Straight	Straight	Straight	Straight	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

1
2
3
4
Next >>

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.45～0.95
  - 0.45
  - 0.8
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1/2
  - 1.05
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.59
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.38
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.97
  - 3
  - 3/4
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
  - 3.97
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.76
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5/8
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.56
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.05
  - 6.1
  - 6.2
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.94
  - 7
  - 7/8
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
  - 7.94
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.53
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.11
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.7
  - 15.8
  - 15.88
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.9
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.64
  - 20.7
  - 20.8
  - 20.9
- 21～21.9
  - 21
  - 21.1
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.7
  - 21.8
  - 21.9
- 22～22.9
  - 22
  - 22.1
  - 22.2
  - 22.23
  - 22.3
  - 22.4
  - 22.5
  - 22.6
  - 22.7
  - 22.8
  - 22.9
- 23～23.9
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.7
  - 23.8
  - 23.81
  - 23.9
- 24～24.9
  - 24
  - 24.1
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.7
  - 24.8
  - 24.9
- 25～25.9
  - 25
  - 25.1
  - 25.2
  - 25.3
  - 25.4
  - 25.5
  - 25.6
  - 25.7
  - 25.8
  - 25.9
- 26～26.9
  - 26
  - 26.1
  - 26.2
  - 26.3
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
  - 26.9
- 27～27.9
  - 27
  - 27.1
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7
  - 27.8
  - 27.9
- 28～28.9
  - 28
  - 28.1
  - 28.2
  - 28.3
  - 28.4
  - 28.5
  - 28.6
  - 28.7
  - 28.8
  - 28.9
- 29～29.9
  - 29
  - 29.1
  - 29.2
  - 29.3
  - 29.4
  - 29.5
  - 29.6
  - 29.7
  - 29.8
  - 29.9
- 30～30.9
  - 30
  - 30.1
  - 30.2
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.7
  - 30.8
  - 30.9
- 31～31.9
  - 31
  - 31.1
  - 31.2
  - 31.3
  - 31.4
  - 31.5
  - 31.6
  - 31.7
  - 31.75
  - 31.8
  - 31.9
- 32～32.9
  - 32
  - 32.1
  - 32.2
  - 32.3
  - 32.4
  - 32.5
  - 32.6
  - 32.7
  - 32.8
  - 32.9
- 33～33.9
  - 33
  - 33.1
  - 33.2
  - 33.3
  - 33.4
  - 33.5
  - 33.6
  - 33.7
  - 33.8
  - 33.9
- 34～34.9
  - 34
  - 34.1
  - 34.2
  - 34.3
  - 34.4
  - 34.5
  - 34.6
  - 34.7
  - 34.8
  - 34.9
- 35～35.9
  - 35
  - 35.1
  - 35.2
  - 35.3
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
  - 35.9
- 36～36.9
  - 36
  - 36.1
  - 36.2
  - 36.3
  - 36.4
  - 36.5
  - 36.6
  - 36.7
  - 36.8
  - 36.9
- 37～37.9
  - 37
  - 37.1
  - 37.2
  - 37.3
  - 37.4
  - 37.5
  - 37.6
  - 37.7
  - 37.8
  - 37.9
- 38～38.9
  - 38
  - 38.1
  - 38.2
  - 38.3
  - 38.4
  - 38.5
  - 38.6
  - 38.7
  - 38.8
  - 38.9
- 39～39.9
  - 39
  - 39.1
  - 39.2
  - 39.3
  - 39.4
  - 39.5
  - 39.6
  - 39.7
  - 39.8
  - 39.9
- 40～40.9
  - 40
  - 40.1
  - 40.2
  - 40.3
  - 40.4
  - 40.5
  - 40.6
  - 40.7
  - 40.8
  - 40.9
- 41～41.9
  - 41
  - 41.1
  - 41.2
  - 41.3
  - 41.4
  - 41.5
  - 41.6
  - 41.7
  - 41.8
  - 41.9
- 42～42.9
  - 42
  - 42.1
  - 42.2
  - 42.3
  - 42.4
  - 42.5
  - 42.6
  - 42.7
  - 42.8
  - 42.9
- 43～43.9
  - 43
  - 43.1
  - 43.2
  - 43.3
  - 43.4
  - 43.5
  - 43.6
  - 43.7
  - 43.8
  - 43.9
- 44～44.9
  - 44
  - 44.1
  - 44.2
  - 44.3
  - 44.4
  - 44.5
  - 44.6
  - 44.7
  - 44.8
  - 44.9
- 45～45.5
  - 45
  - 45.5
- 46～46.5
  - 46
  - 46.5
- 47～47.5
  - 47
  - 47.5
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 85
- 90
- 95
- 100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]

Drawing

Clear

Blade length (ℓ)(mm)
1.1

1.6

1.8

2

2.2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

10.5

11

12

13

14

15

16

17

18

19

20

22

23

25

26

27

28

30

32

33

34

35

38

39

40

45

48

50

53

55

56

58

60

63

65

68

70

75

80

85

90

95

100

105

110

115

120

125

130

150

160

180

200

250

300
Drawing

Clear

Shank diameter (d)(mm)
4

5

BS5

6

7

8

9

10

11

12

15

16

19

20

24

25

32

42
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

6

8

10

12

14

16

18
Clear

Overall Length (L)(mm)
- 27
- 31～38
  - 31
  - 35
  - 38
- 40～48
  - 40
  - 42
  - 45
  - 46
  - 48
- 50～59
  - 50
  - 51
  - 52
  - 53
  - 54
  - 55
  - 56
  - 57
  - 58
  - 59
- 60～69
  - 60
  - 62
  - 63
  - 64
  - 65
  - 66
  - 67
  - 68
  - 69
- 70～79
  - 70
  - 72
  - 73
  - 74
  - 75
  - 76
  - 77
  - 78
  - 79
- 80～89
  - 80
  - 82
  - 83
  - 84
  - 85
  - 89
- 90～97
  - 90
  - 91
  - 92
  - 95
  - 97
- 100～108
  - 100
  - 101
  - 104
  - 105
  - 108
- 110～119
  - 110
  - 115
  - 116
  - 119
- 120～127
  - 120
  - 121
  - 122
  - 124
  - 125
  - 127
- 130～137
  - 130
  - 132
  - 134
  - 135
  - 137
- 140～149
  - 140
  - 142
  - 144
  - 145
  - 147
  - 149
- 150～155
  - 150
  - 154
  - 155
- 160～169
  - 160
  - 162
  - 165
  - 169
- 170～178
  - 170
  - 173
  - 175
  - 178
- 180～189
  - 180
  - 182
  - 183
  - 184
  - 185
  - 186
  - 188
  - 189
- 190～198
  - 190
  - 191
  - 193
  - 195
  - 198
- 200～208
  - 200
  - 202
  - 203
  - 205
  - 208
- 210～215
  - 210
  - 213
  - 215
- 220～225
  - 220
  - 222
  - 224
  - 225
- 230～235.5
  - 230
  - 233
  - 235
  - 235.5
- 240～245.5
  - 240
  - 245
  - 245.5
- 250～255
  - 250
  - 250.5
  - 253
  - 255
- 260～265
  - 260
  - 265
- 270～275
  - 270
  - 275
- 280～288
  - 280
  - 283
  - 285
  - 288
- 290～295
  - 290
  - 295
- 300
- 340～345
  - 340
  - 345
- 350
- 395
- 400
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
Details

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
- Other
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- Non-Coated
- AG
Details

Clear

Blade shape type
- Square
- For Keyway
Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15 to 25˚)
- Standard torsion (30-40°)
- Powerful Torsion (45°-60°)
- Other
Clear

Base Blade Y/N
- Available
Clear

Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- High-speed steel
- Alloy HSS
Details

Clear

Underneck length (ℓ1)(mm)
28

44

58

66
Drawing

Clear

shank
- Straight
Clear

Narrow search by specifying Manufacturer

- MISUMI (40)
- Economy series (0)
- OSG (48)
- SANKO MFG (22)
- NACHI(FUJIKOSHI) (19)
- MITSUBISHI HITACHI TOOL (14)
- FUKUDA (12)
- ASAHI TOOLS (4)
- EIKOSHA (2)
- MITSUBISHI MATERIALS (1)
- ESCO (0)
- DAIICHITOOL (0)
- TAIYO-TOOL (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Square End Mills (HSS)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Square End Mills (HSS)（Machining Application：Side）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Machining Application

Coating

Blade shape type

Torsion Angle (θ)

Base Blade Y/N

Tool Material Type

Underneck length (ℓ1)(mm)

shank

Narrow search by specifying Manufacturer

CAD

Related Categories to Square End Mills (HSS)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Square End Mills (HSS)（Machining Application：Side）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Machining Application

Coating

Blade shape type

Torsion Angle (θ)

Base Blade Y/N

Tool Material Type

Underneck length (ℓ1)(mm)

shank

Narrow search by specifying Manufacturer

CAD

Related Categories to Square End Mills (HSS)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB