(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 23/2/2025 sampai dengan 6:00 pada tanggal 24/2. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 23/2 to 6:00 (WIB) 24/2/2025. We apologize for the inconvenience.
Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Square End Mills (HSS)（Tool Material Type：Powder high-speed steel）

58 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less

SS4T S Coating STEC 4-Flute Short

SANKO MFG

[Features]
· 4-flute finishing endmill with TiCN coating.
· High grade powder metallurgy HSS with S-coating.
· Ideal for Finish Machining

Standard Price:	534,818 IDR-
Days to Ship:	9 Day(s) or more

CPM End Mill (2-flute straight blade for forming work, medium type) CPM-STDN

OSG

2-flute straight flute end mill medium type for molding using powder metal high-speed steel CPM as the base material. It can be molded into the required shape for use.

Standard Price:	420,928 IDR-
Days to Ship:	8 Day(s) or more

XPM End Mill (2-Flute Short Type) XPM-EDS

OSG

2-flute end mill short type using powder metal high-speed steel XPM as the base material.

Standard Price:	385,537 IDR-
Days to Ship:	2 Day(s) or more

XPM End Mill (High Helix Short Type) XPM-EHS

OSG

Sharp, high helix type end mill using powder metal high-speed steel XPM as the base material.

Standard Price:	493,480 IDR-
Days to Ship:	2 Day(s) or more

AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short

MISUMI

[Features]
·High speed steel powder square short blade length 2-flute type that can expect for durability
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS
2 Flutes
S (Short)

Standard Price:	303,364 IDR-
Days to Ship:	8 Day(s) or more

AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular

MISUMI

[Features]
·High speed steel powder square regular blade length 2-flute type that can expect for durability
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS
2 Flutes
R (Regular)

Standard Price:	313,283 IDR-
Days to Ship:	8 Day(s) or more

AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

MISUMI

[Features]
·High speed steel powder square long blade length type that can expect for durability
·Suitable for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS
2 Flutes
L (Long)

Standard Price:	338,339 IDR-
Days to Ship:	8 Day(s) or more

AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short

MISUMI

AS coating with excellent wear resistance achieves the high-precision finish even in prolonged processing

Volume Discount

AS
4 Flutes
S (Short)

Standard Price:	320,447 IDR-
Days to Ship:	8 Day(s) or more

AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular

MISUMI

[Features]
·Achieving high durability in a wide range of materials, from raw materials to heat-treated steel
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

AS
4 Flutes
R (Regular)

Standard Price:	338,048 IDR-
Days to Ship:	8 Day(s) or more

AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long

MISUMI

Volume Discount

AS
4 Flutes
L (Long)

Standard Price:	358,178 IDR-
Days to Ship:	8 Day(s) or more

TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short

MISUMI

[Features]
·High speed steel powder roughing short flute length type that can expect for durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TiCN
2 Flutes
S (Short)

Standard Price:	234,464 IDR-
Days to Ship:	8 Day(s) or more

TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular

MISUMI

[Features]
·High speed steel powder roughing regular flute length type that can expect for durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TiCN
2 Flutes
R (Regular)

Standard Price:	233,654 IDR-
Days to Ship:	8 Day(s) or more

TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

MISUMI

[Features]
·High speed steel powder roughing long flute length type that can expect durability
·Suitable for deep cavity milling
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TiCN
2 Flutes
L (Long)

Standard Price:	201,417 IDR-
Days to Ship:	8 Day(s) or more

TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short

MISUMI

Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

Volume Discount

TiCN
4 Flutes
S (Short)

Standard Price:	209,683 IDR-
Days to Ship:	8 Day(s) or more

TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular

MISUMI

[Features]
·High speed steel powder roughing regular flute length 4-flute type that can expect for durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TiCN
4 Flutes
R (Regular)

Standard Price:	209,683 IDR-
Days to Ship:	8 Day(s) or more

TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular

MISUMI

[Features]
·High speed steel powder roughing long flute length 4-flute type that can expect for durability
·Suitable for deep cavity milling
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TiCN
4 Flutes
L (Long)

Standard Price:	218,041 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill, 2-Flute, Short / Non-Coated Model

MISUMI

[Features]
·High speed steel powder square uncoated short flute length 2-flute type that can expect for durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
S (Short)

Standard Price:	217,397 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

MISUMI

[Features]
·High speed steel powder square uncoated regular flute length 2-flute type that can expect for durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
R (Regular)

Standard Price:	228,144 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model

MISUMI

[Features]
·Uncoated long flute length 2-flute type of high speed steel powder square that can expect for durability
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
L (Long)

Standard Price:	255,421 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model

MISUMI

[Features]
·High speed steel powder square uncoated short flute length 4-flute type that expect for durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
S (Short)

Standard Price:	236,685 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill 4-Flute / Regular / Non-Coated Type

MISUMI

[Features]
·High speed steel powder square uncoated regular flute length 4-flute type that can expect for durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
R (Regular)

Standard Price:	244,400 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Square End Mill 4-Flute / Long / Non-Coated Type

MISUMI

[Features]
·Powdered high speed steel powder square uncoated long flute length 4-flute type that can expect for durability
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
L (Long)

Standard Price:	277,465 IDR-
Days to Ship:	8 Day(s) or more

V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OH1)

OSG

Powder HSS XPM key grooving end mill with V-coating

Standard Price:	654,068 IDR-
Days to Ship:	8 Day(s) or more

V Coating XPM End Mill (2-flute short type) V-XPM-EDS

OSG

Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

Standard Price:	564,927 IDR-
Days to Ship:	2 Day(s) or more

V Coating XPM Slim Shank End Mill (2-flute medium type) V-SS-XPM-EDN

OSG

Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.

Standard Price:	616,023 IDR-
Days to Ship:	8 Day(s) or more

V Coating XPM End Mill (2-flute medium type) V-XPM-EDN

OSG

Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

Standard Price:	518,475 IDR-
Days to Ship:	2 Day(s) or more

XPM End Mill (2-Flute Medium Type) XPM-EDN

OSG

2-flute end mill medium type using powder metal high-speed steel XPM as the base material.

Standard Price:	445,039 IDR-
Days to Ship:	2 Day(s) or more

V Coating XPM End Mill (2-flute long type) V-XPM-EDL

OSG

Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

Standard Price:	695,211 IDR-
Days to Ship:	2 Day(s) or more

XPM End Mill (2-Flute Long Type) XPM-EDL

OSG

2-flute end mill long type using powder metal high-speed steel XPM as the base material. Suitable for deep cuts.

Standard Price:	475,785 IDR-
Days to Ship:	2 Day(s) or more

XPM End Mill (2-Flute Deep-Engraving Medium Type) DE-XPM-EDN

OSG

Long shank end mill with 2 flutes for deep engraving. The shank diameter is designed to be thinner than the blade diameter.

Standard Price:	646,078 IDR-
Days to Ship:	8 Day(s) or more

V Coating XPM End Mill (4-flute short type) V-XPM-EMS

OSG

Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

Standard Price:	621,553 IDR-
Days to Ship:	2 Day(s) or more

V Coating XPM Slim Shank End Mill (4-flute short) V-SS-XPM-EMS

OSG

Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.

Standard Price:	679,063 IDR-
Days to Ship:	8 Day(s) or more

V Coating XPM End Mill (4-flute long type) V-XPM-EML

OSG

Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

Standard Price:	762,454 IDR-
Days to Ship:	2 Day(s) or more

XPM End Mill (4-Flute Deep-Engraving Short Type) DE-XPM-EMS

OSG

Long shank end mill with 4 flutes for deep engraving. The shank diameter is designed to be thinner than the blade diameter.

Standard Price:	685,293 IDR-
Days to Ship:	8 Day(s) or more

TiN Coating, XPM End Mill (high-helix short type) TIN-XPM-EHS

OSG

TiN coating, 50° torsion, short-size end mill.

Standard Price:	737,959 IDR-
Days to Ship:	8 Day(s) or more

V Coating XPM End Mill (high-helix short type) V-XPM-EHS

OSG

High torsion type with great sharpness. Can be used for a wide range of applications from heavy cutting to finishing cutting.

Standard Price:	596,557 IDR-
Days to Ship:	2 Day(s) or more

TiN Coating, XPM End Mill (high-helix long type) TIN-XPM-EHL

OSG

TiN coating, 50° torsion, long-size end mill.

Standard Price:	970,054 IDR-
Days to Ship:	8 Day(s) or more

XPM High Helix Long Type V-XPM-EHL

OSG

High torsion type long blade series with great sharpness. V coating provides stable tool service life.

Standard Price:	970,054 IDR-
Days to Ship:	8 Day(s) or more

XPM End Mill (High Helix Long Type) XPM-EHL

OSG

High torsion type long blade series with great sharpness. Powder HSS XPM is used as the base material.

Standard Price:	718,580 IDR-
Days to Ship:	8 Day(s) or more

XPM End Mill (Multi-Flute Short Type) XPM-EMS

OSG

4-flute end mill short type using powder metal high-speed steel XPM as the base material.

STOCK

Standard Price:	423,583 IDR-
Days to Ship:	1 Day(s) or more

XPM End Mill (Multi-Flute Long Type) XPM-EML

OSG

Multi-flute end mill long type using powder metal high-speed steel XPM as the base material. Suitable for deep cuts.

Standard Price:	564,927 IDR-
Days to Ship:	2 Day(s) or more

V Coating XPM End Mill (for 2-flute countersinking) VP-ZDS

OSG

V coating applied 2-flute short type end mill for counterbore milling using powder metal high-speed steel CPM as the base material.

Standard Price:	648,538 IDR-
Days to Ship:	8 Day(s) or more

ESM End Mill, 2-Flute / Short Flute Length 2ESMS□□.□

MITSUBISHI HITACHI TOOL

[Applications]It can be used for side milling, counterbore milling, grooving, roughing, semi-finishing, and finishing. [Features]Powder metal high-speed steel with excellent abrasion resistance and toughness is used.

Standard Price:	673,846 IDR-
Days to Ship:	8 Day(s) or more

ESM End Mill (for Stainless Steel) 2ESMSUS□□

MITSUBISHI HITACHI TOOL

Standard Price:	590,769 IDR-
Days to Ship:	8 Day(s) or more

ESM End Mill (Regular Flute Length) 2ESMR□□.□

MITSUBISHI HITACHI TOOL

Standard Price:	673,846 IDR-
Days to Ship:	8 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Machining Application
Coating
Blade shape type
Torsion Angle (θ)
Base Blade Y/N
Tool Material Type
Underneck length (ℓ1)(mm)
shank


Brand	SANKO MFG	OSG	OSG	OSG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL
Product Series	SS4T S Coating STEC 4-Flute Short	CPM End Mill (2-flute straight blade for forming work, medium type) CPM-STDN	XPM End Mill (2-Flute Short Type) XPM-EDS	XPM End Mill (High Helix Short Type) XPM-EHS	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular	AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular	AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular	TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular	Powdered High-Speed Steel Square End Mill, 2-Flute, Short / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model	Powdered High-Speed Steel Square End Mill 4-Flute / Regular / Non-Coated Type	Powdered High-Speed Steel Square End Mill 4-Flute / Long / Non-Coated Type	V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OH1)	V Coating XPM End Mill (2-flute short type) V-XPM-EDS	V Coating XPM Slim Shank End Mill (2-flute medium type) V-SS-XPM-EDN	V Coating XPM End Mill (2-flute medium type) V-XPM-EDN	XPM End Mill (2-Flute Medium Type) XPM-EDN	V Coating XPM End Mill (2-flute long type) V-XPM-EDL	XPM End Mill (2-Flute Long Type) XPM-EDL	XPM End Mill (2-Flute Deep-Engraving Medium Type) DE-XPM-EDN	V Coating XPM End Mill (4-flute short type) V-XPM-EMS	V Coating XPM Slim Shank End Mill (4-flute short) V-SS-XPM-EMS	V Coating XPM End Mill (4-flute long type) V-XPM-EML	XPM End Mill (4-Flute Deep-Engraving Short Type) DE-XPM-EMS	TiN Coating, XPM End Mill (high-helix short type) TIN-XPM-EHS	V Coating XPM End Mill (high-helix short type) V-XPM-EHS	TiN Coating, XPM End Mill (high-helix long type) TIN-XPM-EHL	XPM High Helix Long Type V-XPM-EHL	XPM End Mill (High Helix Long Type) XPM-EHL	XPM End Mill (Multi-Flute Short Type) XPM-EMS	XPM End Mill (Multi-Flute Long Type) XPM-EML	V Coating XPM End Mill (for 2-flute countersinking) VP-ZDS	ESM End Mill, 2-Flute / Short Flute Length 2ESMS□□.□	ESM End Mill (for Stainless Steel) 2ESMSUS□□	ESM End Mill (Regular Flute Length) 2ESMR□□.□
Days to Ship	9 Day(s) or more	8 Day(s) or more	2 Day(s) or more	2 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	2 Day(s) or more	8 Day(s) or more	2 Day(s) or more	2 Day(s) or more	2 Day(s) or more	2 Day(s) or more	8 Day(s) or more	2 Day(s) or more	8 Day(s) or more	2 Day(s) or more	8 Day(s) or more	8 Day(s) or more	2 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	1 Day(s) or more	2 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more
Specifications					AS 2 Flutes S (Short)	AS 2 Flutes R (Regular)	AS 2 Flutes L (Long)	AS 4 Flutes S (Short)	AS 4 Flutes R (Regular)	AS 4 Flutes L (Long)	TiCN 2 Flutes S (Short)	TiCN 2 Flutes R (Regular)	TiCN 2 Flutes L (Long)	TiCN 4 Flutes S (Short)	TiCN 4 Flutes R (Regular)	TiCN 4 Flutes L (Long)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 2 Flutes L (Long)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 4 Flutes L (Long)																		STOCK
Blade diameter (D)(φ)	3 ～ 40	1.5 ～ 20	0.8 ～ 40	6 ～ 30	1 ～ 40	1 ～ 25	3 ～ 20	3 ～ 25	3 ～ 25	3 ～ 25	1 ～ 40	1 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	1 ～ 40	1 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 12	1 ～ 40	6 ～ 25	1 ～ 20	1 ～ 20	3 ～ 30	3 ～ 40	8 ～ 50	2.5 ～ 40	6 ～ 25	3 ～ 30	8 ～ 50	6 ～ 30	3 ～ 30	6 ～ 30	6 ～ 30	6 ～ 30	2 ～ 40	3 ～ 40	3 ～ 20	1 ～ 20	1.5 ～ 30	1 ～ 30
Blade length (ℓ)(mm)	10 ～ 65	5 ～ 45	2 ～ 65	15 ～ 55	2.5 ～ 65	3.5 ～ 60	15 ～ 75	8 ～ 45	12 ～ 68	15 ～ 90	2.5 ～ 65	3.5 ～ 60	15 ～ 90	8 ～ 45	12 ～ 68	15 ～ 90	2.5 ～ 65	3.5 ～ 60	15 ～ 90	8 ～ 45	12 ～ 68	15 ～ 90	5 ～ 15	2.5 ～ 65	15 ～ 50	3.5 ～ 45	3.5 ～ 45	15 ～ 90	15 ～ 110	20 ～ 75	10 ～ 65	15 ～ 50	15 ～ 90	20 ～ 75	15 ～ 55	6 ～ 55	25 ～ 105	25 ～ 105	25 ～ 105	8 ～ 65	15 ～ 110	8 ～ 38	2.5 ～ 40	4 ～ 55	3.5 ～ 55
Shank diameter (d)(mm)	6 ～ 32	6 ～ 20	6 ～ 32	8 ～ 32	6 ～ 32	6 ～ 25	6 ～ 20	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 12	6 ～ 32	5 ～ 24	6 ～ 20	6 ～ 20	6 ～ 25	6 ～ 32	6 ～ 42	6 ～ 32	5 ～ 24	6 ～ 25	6 ～ 42	8 ～ 32	6 ～ 32	8 ～ 32	8 ～ 32	8 ～ 32	6 ～ 32	6 ～ 32	6 ～ 20	6 ～ 20	6 ～ 25	6 ～ 25
Number of flutes(sheet)	4	2	2	3 ～ 4	2	2	2	4	4	4	2	2	2	4	4	4	2	2	2	4	4	4	2	2	2	2	2	2	2	2	4	4	4	4	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	4	4	2	2	2	2
Overall Length (L)(mm)	50 ～ 150	45 ～ 110	50 ～ 165	65 ～ 150	45 ～ 150	45 ～ 130	60 ～ 140	52 ～ 121	55 ～ 144	60 ～ 160	45 ～ 150	45 ～ 130	60 ～ 160	52 ～ 121	55 ～ 144	60 ～ 160	45 ～ 150	45 ～ 130	60 ～ 160	52 ～ 121	55 ～ 144	60 ～ 160	50 ～ 70	50 ～ 165	85 ～ 160	55 ～ 125	55 ～ 125	65 ～ 180	65 ～ 210	80 ～ 350	55 ～ 165	85 ～ 160	65 ～ 180	80 ～ 350	65 ～ 150	55 ～ 150	75 ～ 200	75 ～ 200	75 ～ 200	55 ～ 165	65 ～ 210	50 ～ 125	50 ～ 120	50 ～ 125	55 ～ 145
work material	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	general steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	general steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove / Countersinking	Side / Groove / Countersinking	Side / Groove / Countersinking
Coating	TiCN	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	-	-	-	Non-Coated	-	Non-Coated	Non-Coated	-	-	-	Non-Coated	TiN	-	TiN	-	Non-Coated	Non-Coated	Non-Coated	-	Non-Coated	Non-Coated	Non-Coated
Blade shape type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Torsion Angle (θ)	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Base Blade Y/N	Available	-	-	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Available	Available	Available
Tool Material Type	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	Straight	Straight	Straight	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	-	-	-

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.45～0.95
  - 0.45
  - 0.8
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1/2
  - 1.05
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.59
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.38
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.97
  - 3
  - 3/4
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
  - 3.97
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.76
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5/8
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.56
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.05
  - 6.1
  - 6.2
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.94
  - 7
  - 7/8
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
  - 7.94
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.53
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.11
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.7
  - 15.8
  - 15.88
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.9
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.64
  - 20.7
  - 20.8
  - 20.9
- 21～21.9
  - 21
  - 21.1
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.7
  - 21.8
  - 21.9
- 22～22.9
  - 22
  - 22.1
  - 22.2
  - 22.23
  - 22.3
  - 22.4
  - 22.5
  - 22.6
  - 22.7
  - 22.8
  - 22.9
- 23～23.9
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.7
  - 23.8
  - 23.81
  - 23.9
- 24～24.9
  - 24
  - 24.1
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.7
  - 24.8
  - 24.9
- 25～25.9
  - 25
  - 25.1
  - 25.2
  - 25.3
  - 25.4
  - 25.5
  - 25.6
  - 25.7
  - 25.8
  - 25.9
- 26～26.9
  - 26
  - 26.1
  - 26.2
  - 26.3
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
  - 26.9
- 27～27.9
  - 27
  - 27.1
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7
  - 27.8
  - 27.9
- 28～28.9
  - 28
  - 28.1
  - 28.2
  - 28.3
  - 28.4
  - 28.5
  - 28.6
  - 28.7
  - 28.8
  - 28.9
- 29～29.9
  - 29
  - 29.1
  - 29.2
  - 29.3
  - 29.4
  - 29.5
  - 29.6
  - 29.7
  - 29.8
  - 29.9
- 30～30.9
  - 30
  - 30.1
  - 30.2
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.7
  - 30.8
  - 30.9
- 31～31.9
  - 31
  - 31.1
  - 31.2
  - 31.3
  - 31.4
  - 31.5
  - 31.6
  - 31.7
  - 31.75
  - 31.8
  - 31.9
- 32～32.9
  - 32
  - 32.1
  - 32.2
  - 32.3
  - 32.4
  - 32.5
  - 32.6
  - 32.7
  - 32.8
  - 32.9
- 33～33.9
  - 33
  - 33.1
  - 33.2
  - 33.3
  - 33.4
  - 33.5
  - 33.6
  - 33.7
  - 33.8
  - 33.9
- 34～34.9
  - 34
  - 34.1
  - 34.2
  - 34.3
  - 34.4
  - 34.5
  - 34.6
  - 34.7
  - 34.8
  - 34.9
- 35～35.9
  - 35
  - 35.1
  - 35.2
  - 35.3
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
  - 35.9
- 36～36.9
  - 36
  - 36.1
  - 36.2
  - 36.3
  - 36.4
  - 36.5
  - 36.6
  - 36.7
  - 36.8
  - 36.9
- 37～37.9
  - 37
  - 37.1
  - 37.2
  - 37.3
  - 37.4
  - 37.5
  - 37.6
  - 37.7
  - 37.8
  - 37.9
- 38～38.9
  - 38
  - 38.1
  - 38.2
  - 38.3
  - 38.4
  - 38.5
  - 38.6
  - 38.7
  - 38.8
  - 38.9
- 39～39.9
  - 39
  - 39.1
  - 39.2
  - 39.3
  - 39.4
  - 39.5
  - 39.6
  - 39.7
  - 39.8
  - 39.9
- 40～40.9
  - 40
  - 40.1
  - 40.2
  - 40.3
  - 40.4
  - 40.5
  - 40.6
  - 40.7
  - 40.8
  - 40.9
- 41～41.9
  - 41
  - 41.1
  - 41.2
  - 41.3
  - 41.4
  - 41.5
  - 41.6
  - 41.7
  - 41.8
  - 41.9
- 42～42.9
  - 42
  - 42.1
  - 42.2
  - 42.3
  - 42.4
  - 42.5
  - 42.6
  - 42.7
  - 42.8
  - 42.9
- 43～43.9
  - 43
  - 43.1
  - 43.2
  - 43.3
  - 43.4
  - 43.5
  - 43.6
  - 43.7
  - 43.8
  - 43.9
- 44～44.9
  - 44
  - 44.1
  - 44.2
  - 44.3
  - 44.4
  - 44.5
  - 44.6
  - 44.7
  - 44.8
  - 44.9
- 45～45.5
  - 45
  - 45.5
- 46～46.5
  - 46
  - 46.5
- 47～47.5
  - 47
  - 47.5
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 85
- 90
- 95
- 100
Drawing

Clear

Blade length (ℓ)(mm)
1.1

1.6

1.8

2

2.2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

10.5

11

12

13

14

15

16

17

18

19

20

22

23

25

26

27

28

30

32

33

34

35

38

39

40

45

48

50

53

55

56

58

60

63

65

68

70

75

80

85

90

95

100

105

110

115

120

125

130

150

160

180

200

250

300
Drawing

Clear

Shank diameter (d)(mm)
4

5

BS5

6

7

8

9

10

11

12

15

16

19

20

24

25

32

42
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

6

8

10

12

14

16

18
Clear

Overall Length (L)(mm)
- 27
- 31～38
  - 31
  - 35
  - 38
- 40～48
  - 40
  - 42
  - 45
  - 46
  - 48
- 50～59
  - 50
  - 51
  - 52
  - 53
  - 54
  - 55
  - 56
  - 57
  - 58
  - 59
- 60～69
  - 60
  - 62
  - 63
  - 64
  - 65
  - 66
  - 67
  - 68
  - 69
- 70～79
  - 70
  - 72
  - 73
  - 74
  - 75
  - 76
  - 77
  - 78
  - 79
- 80～89
  - 80
  - 82
  - 83
  - 84
  - 85
  - 89
- 90～97
  - 90
  - 91
  - 92
  - 95
  - 97
- 100～108
  - 100
  - 101
  - 104
  - 105
  - 108
- 110～119
  - 110
  - 115
  - 116
  - 119
- 120～127
  - 120
  - 121
  - 122
  - 124
  - 125
  - 127
- 130～137
  - 130
  - 132
  - 134
  - 135
  - 137
- 140～149
  - 140
  - 142
  - 144
  - 145
  - 147
  - 149
- 150～155
  - 150
  - 154
  - 155
- 160～169
  - 160
  - 162
  - 165
  - 169
- 170～178
  - 170
  - 173
  - 175
  - 178
- 180～189
  - 180
  - 182
  - 183
  - 184
  - 185
  - 186
  - 188
  - 189
- 190～198
  - 190
  - 191
  - 193
  - 195
  - 198
- 200～208
  - 200
  - 202
  - 203
  - 205
  - 208
- 210～215
  - 210
  - 213
  - 215
- 220～225
  - 220
  - 222
  - 224
  - 225
- 230～235.5
  - 230
  - 233
  - 235
  - 235.5
- 240～245.5
  - 240
  - 245
  - 245.5
- 250～255
  - 250
  - 250.5
  - 253
  - 255
- 260～265
  - 260
  - 265
- 270～275
  - 270
  - 275
- 280～288
  - 280
  - 283
  - 285
  - 288
- 290～295
  - 290
  - 295
- 300
- 340～345
  - 340
  - 345
- 350
- 395
- 400
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
Details

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
- Other
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- Non-Coated
- AG
Details

Clear

Blade shape type
- Square
- For Keyway
Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15 to 25˚)
- Standard torsion (30-40°)
- Powerful Torsion (45°-60°)
- Other
Clear

Base Blade Y/N
- Available
Clear

Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- High-speed steel
- Alloy HSS
Details

Clear

Underneck length (ℓ1)(mm)
28

44

58

66
Drawing

Clear

shank
- Straight
Clear

Narrow search by specifying Manufacturer

- MISUMI (18)
- Economy series (0)
- OSG (24)
- SANKO MFG (10)
- MITSUBISHI HITACHI TOOL (6)
- FUKUDA (0)
- ESCO (0)
- DAIICHITOOL (0)
- TAIYO-TOOL (0)
- MITSUBISHI MATERIALS (0)
- NACHI(FUJIKOSHI) (0)
- ASAHI TOOLS (0)
- EIKOSHA (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Square End Mills (HSS)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Square End Mills (HSS)（Tool Material Type：Powder high-speed steel）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Machining Application

Coating

Blade shape type

Torsion Angle (θ)

Base Blade Y/N

Tool Material Type

Underneck length (ℓ1)(mm)

shank

Narrow search by specifying Manufacturer

CAD

Related Categories to Square End Mills (HSS)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Square End Mills (HSS)（Tool Material Type：Powder high-speed steel）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Machining Application

Coating

Blade shape type

Torsion Angle (θ)

Base Blade Y/N

Tool Material Type

Underneck length (ℓ1)(mm)

shank

Narrow search by specifying Manufacturer

CAD

Related Categories to Square End Mills (HSS)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB