(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 19/1/2025 sampai dengan 5:00 pada tanggal 20/1/2025. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 19/1/2025 to 5:00 (WIB) 20/1/2025. We apologize for the inconvenience.
Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Radius End Mills (Carbide)（Torsion Angle (θ)：Powerful Torsion (45°-60°)）

59 items

: 30; 45; 60

Days to Ship	All Same day 2 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 15 Day(s) or Less 16 Day(s) or Less 17 Day(s) or Less

One Cut Super Radius End Mill DV-OCSR

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Standard Price:	2,601,105 IDR-
Days to Ship:	10 Day(s) or more

TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

MISUMI

[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
4 Flutes
B (Stub)

Standard Price:	608,226 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

MISUMI

[Features]
·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
4 Flutes
S (Short)

Standard Price:	1,012,456 IDR-
Days to Ship:	8 Day(s) or more

GS MILL Hard Radius GSH-R

NACHI(FUJIKOSHI)

Excellent in fracture resistance and is ideal for corner radius and contour machining of high hardness material.

Standard Price:	1,316,156 IDR-
Days to Ship:	8 Day(s) or more

GSX, Radius, 2.5D, GSXVL4T-R-2.5D

NACHI(FUJIKOSHI)

[Notice] The use of unequal spacing and unequal leads, and a sharp cutting edge shape suppress chattering and are suitable for heat resistant alloys.

Standard Price:	1,250,461 IDR-
Days to Ship:	8 Day(s) or more

SCE4A Ultra-Strong Radius, 4-Flute, OK Coated

OKAZAKI SEIKO

A multi-function type end mill that is capable of groove milling and side milling as well as profiling.

Standard Price:	1,008,202 IDR-
Days to Ship:	12 Day(s) or more

TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type

MISUMI

Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering

Volume Discount

TS
High-Hardness Steel
3 Flutes
S (Short)

Standard Price:	1,582,058 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

MISUMI

[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
4 Flutes
S (Short)

Standard Price:	1,149,365 IDR-
Days to Ship:	8 Day(s) or more

TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short

MISUMI

[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
3 Flutes
S (Short)

Standard Price:	936,394 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

MISUMI

[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling

Volume Discount

TS
High-Hardness Steel
4 Flutes
S (Short)

Standard Price:	952,186 IDR-
Days to Ship:	8 Day(s) or more

XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

MISUMI

3-flute 45° helix radius that's resistant to chattering is available at an affordable price

Volume Discount

XAL

General Steel

3 Flutes
Days to Ship: Same day or more

Days to Ship:	Same day or more

On Sale Till 31/03/2025

XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

MISUMI

4-Flute Radius for High-Efficiency and High-Speed Machining

Volume Discount

XAL
General Steel
4 Flutes

Standard Price:	459,746 IDR-
	Special Price
Days to Ship:	Same day or more

TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

MISUMI

[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish

Volume Discount

TS
High-Hardness Steel
3 Flutes
B (Stub)

Standard Price:	971,889 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

MISUMI

[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
3 Flutes
S (Short)

Standard Price:	963,439 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

MISUMI

Long neck type with interference prevention can be selected from a number of effective lengths

Volume Discount

TS
High-Hardness Steel
4 Flutes
S (Short)

Standard Price:	1,081,756 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

MISUMI

[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
B (Stub)

Standard Price:	716,663 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

MISUMI

Volume Discount

TS
General Steel
4 Flutes
B (Stub)

Standard Price:	681,308 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

MISUMI

[Features]
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

B (Stub)
Days to Ship: 8 Day(s) or more
TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type

MISUMI

[Features]
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

S (Short)
Days to Ship: 8 Day(s) or more
TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

MISUMI

[Features]
·Radius type of multi-function end mill
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping

Volume Discount

TS

General Steel

3 Flutes

R (Regular)
Days to Ship: 8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

MISUMI

[Features]
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Because of its high chip removal capability performance, it is possible to process at feed rate that is more than double compared to that of standard end mill
·Long shank type ideal for deep cavity milling
·For ø7 and above, shank diameter is thinner than cutting diameter to prevent interference
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Standard Price:	1,108,800 IDR-
Days to Ship:	Same day or more

TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

MISUMI

[Features]
·Radius type of multi-function end mill
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·By adopting stub blade length that is 1.5 times longer than cutting diameter, it is possible to process bottom surface while suppressing chattering

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 8 Day(s) or more
TSC series carbide radius end mill, 4-flute, 45° spiral / short model

MISUMI

[Features]
·Multi-function end mill radius type.
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: 8 Day(s) or more
TSC series carbide radius end mill, 4-flute, 45°, regular model

MISUMI

[Features]
·Radius type of multi-function end mill
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

R (Regular)
Days to Ship: 8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model

MISUMI

By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving

Volume Discount

TS
High-Hardness Steel
3 Flutes
B (Stub)

Standard Price:	905,970 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model

MISUMI

[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Taper neck is effective in suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
4 Flutes
B (Stub)

Standard Price:	982,030 IDR-
Days to Ship:	8 Day(s) or more

TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model

MISUMI

The high precision radius end mill for shrink fit holder achieves the high accuracy and high efficiency machining

Volume Discount

TS
High-Hardness Steel
4 Flutes
B (Stub)

Standard Price:	1,063,163 IDR-
Days to Ship:	8 Day(s) or more

TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model

MISUMI

[Features]
·High helix angle end mill with radius for machining high hardness steel
·High tool rigidity minimizes tool tilt during side milling
·Machining of high hardness steel up to 65HRC is possible
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

High-Hardness Steel

Multi-Flutes （5 ~）

B (Stub)
Days to Ship: 8 Day(s) or more

Days to Ship:	8 Day(s) or more

TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type

MISUMI

The popular radius type for stainless steel processing is also effective in preventing chipping

Volume Discount

TS
SUS
3 Flutes
S (Short)

Standard Price:	1,049,641 IDR-
Days to Ship:	8 Day(s) or more

DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

MISUMI

In addition to the standard products, the radius can be selected extensively for manufactured products

Volume Discount

DLC

Aluminum

2 Flutes

R (Regular)
Days to Ship: 8 Day(s) or more
DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

MISUMI

The radius-equipped type prevents cutter marks and also shows effectiveness in improving the surface roughness

Volume Discount

DLC

Aluminum

3 Flutes

R (Regular)
Days to Ship: 8 Day(s) or more
Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

MISUMI

Non-coated manufactured products can be shipped on the 5th day in addition to the stocked products

Volume Discount

Non-Coated

Aluminum

2 Flutes

R (Regular)
Days to Ship: 8 Day(s) or more
Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

MISUMI

Radius type that's also effective in preventing cutter marks

Volume Discount

Non-Coated

Aluminum

3 Flutes

R (Regular)
Days to Ship: 8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

MISUMI

Comes with the rounded edge that suppresses machining streaks in standing-wall multi-stage machining

Volume Discount

Non-Coated
Aluminum
3 Flutes

Standard Price:	1,125,650 IDR-
Days to Ship:	8 Day(s) or more

TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model

MISUMI

[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter and 45° helix angle, enabling high-efficiency machining with high feed
·Long neck type is ideal for deep cavity milling of deep pockets, etc.
·Versatile type that can be used for engraving, side surfaces, R, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
3 Flutes

Standard Price:	951,607 IDR-
Days to Ship:	8 Day(s) or more

XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model

MISUMI

Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining

Volume Discount

Standard Price:	331,288 IDR-
Days to Ship:	8 Day(s) or more

Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose

OSG

Corner radius type with a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.

Standard Price:	2,237,606 IDR-
Days to Ship:	8 Day(s) or more

Micro Grain Carbide End Mills PHOENIX Deep-Feed Radius

OSG

Adopts an ultra-heat-resistant and ultra-hard WXS coating

Standard Price:	2,148,243 IDR-
Days to Ship:	8 Day(s) or more

ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation

OSG

In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.

Standard Price:	1,571,482 IDR-
Days to Ship:	2 Day(s) or more

ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation with HS Shank

OSG

Ideal for high-efficiency machining of pocket engraving with the minimum required blade length and strong torsion. Overall tool length which fits shrink-fit and HSK types perfectly.

Standard Price:	1,824,630 IDR-
Days to Ship:	8 Day(s) or more

WXS Coated Multiple Flutes Short Super

OSG

Radius end mill for high-speed processing with high rigidity. High speed machining of hardened steel is also possible.

Standard Price:	2,478,235 IDR-
Days to Ship:	8 Day(s) or more

ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated High Speed Multi-Purpose

OSG

Capable of high-efficiency, high-precision machining of wide standing walls using step cutting

Standard Price:	3,057,135 IDR-
Days to Ship:	2 Day(s) or more

Epoch TH, Hard Regular Flute Length with Corner R CEPR6□□□-□□-TH [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

Excellent cutting chip discharge and high efficiency

Standard Price:	3,666,154 IDR-
Days to Ship:	8 Day(s) or more

HGGVRX HG Coated Carbide High Helix Radius

SANKO MFG

[Features]
· HGGCNX radius type.
· Suitable for corner rounding or cutting curved surfaces.
· High efficiency machining can be achieved due to a larger contact area than with a ball end mill, which increases the pick feed.

Standard Price:	930,840 IDR-
Days to Ship:	10 Day(s) or more

SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated

OKAZAKI SEIKO

Multi-function type radius end mill capable of high speed machining of high hardness materials up to 65 HRC due to the effects of OK hard coating.

Standard Price:	1,008,202 IDR-
Days to Ship:	12 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

												On Sale Till 31/03/2025
Brand	DIJET	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OKAZAKI SEIKO	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	MITSUBISHI HITACHI TOOL	SANKO MFG	OKAZAKI SEIKO
Product Series	One Cut Super Radius End Mill DV-OCSR	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model	GS MILL Hard Radius GSH-R	GSX, Radius, 2.5D, GSXVL4T-R-2.5D	SCE4A Ultra-Strong Radius, 4-Flute, OK Coated	TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model	TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model	XAL series carbide radius end mill, 3-flute, 45° torsion / regular model	XAL series carbide radius end mill, 4-flute, 45° torsion / regular model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model	TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model	TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 3-flute, 45° spiral / stub model	TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type	TSC series carbide radius end mill, 3-flute, 45° spiral / regular model	TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model	TSC series carbide radius end mill, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45°, regular model	TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model	TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model	TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model	TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model	TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type	DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model	DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model	Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model	Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model	Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model	TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model	XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model	Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose	Micro Grain Carbide End Mills PHOENIX Deep-Feed Radius	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation with HS Shank	WXS Coated Multiple Flutes Short Super	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated High Speed Multi-Purpose	Epoch TH, Hard Regular Flute Length with Corner R CEPR6□□□-□□-TH [Alteration Supported Product]	HGGVRX HG Coated Carbide High Helix Radius	SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated
Days to Ship	10 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	12 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	Same day or more	Same day or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	Same day or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	2 Day(s) or more	8 Day(s) or more	8 Day(s) or more	2 Day(s) or more	8 Day(s) or more	10 Day(s) or more	12 Day(s) or more
Specifications		TS High-Hardness Steel 4 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes S (Short)				TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	XAL General Steel 3 Flutes	XAL General Steel 4 Flutes	TS High-Hardness Steel 3 Flutes B (Stub)	TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS General Steel 3 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	TS High-Hardness Steel 3 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes B (Stub)	TS High-Hardness Steel Multi-Flutes （5 ~） B (Stub)	TS SUS 3 Flutes S (Short)	DLC Aluminum 2 Flutes R (Regular)	DLC Aluminum 3 Flutes R (Regular)	Non-Coated Aluminum 2 Flutes R (Regular)	Non-Coated Aluminum 3 Flutes R (Regular)	Non-Coated Aluminum 3 Flutes	TS High-Hardness Steel 3 Flutes
Blade diameter (D)(φ)	2 ～ 20	2 ～ 12	2 ～ 20	6 ～ 20	6 ～ 20	4 ～ 12	4 ～ 12	4 ～ 20	4 ～ 12	4 ～ 12	0 ～ 16	4 ～ 12	2 ～ 12	2 ～ 12	4 ～ 16	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 20	3 ～ 22	3 ～ 12	3 ～ 20	3 ～ 20	3 ～ 12	3 ～ 12	2 ～ 6	6 ～ 12	3 ～ 12	2 ～ 12	2 ～ 12	2 ～ 12	2 ～ 12	5 ～ 22	4 ～ 12	2 ～ 20	1 ～ 5	6 ～ 20	3 ～ 20	6 ～ 8	6 ～ 25	10 ～ 22	6 ～ 20	4 ～ 25	4 ～ 12
R Size(mm)	0.5 ～ 3	0.5 ～ 2	0.5 ～ 3	0.2 ～ 2	0.3 ～ 3	0.5 ～ 2	0.813 ～ 2.438	0.813 ～ 2.607	0.813 ～ 2.438	0.813 ～ 2.438	0.2 ～ 2	0.2 ～ 2	0.5 ～ 2	0.5 ～ 2	1 ～ 3	0.3 ～ 1	0.3 ～ 1	0.5 ～ 1	0.3 ～ 2	0.2 ～ 2	0.2 ～ 2	0.5 ～ 1	0.2 ～ 3	0.2 ～ 3	0.8 ～ 2	0.8 ～ 2	0.2 ～ 0.5	0.5 ～ 2	0.5 ～ 2	0.2 ～ 1	0.2 ～ 1	0.2 ～ 1	0.2 ～ 1	0.5 ～ 2	1 ～ 2	0.2 ～ 3	0.3 ～ 1	1.5 ～ 3	0.2 ～ 3	0.5	0.2 ～ 3	0.5 ～ 1	0.3 ～ 3	0.5 ～ 3	0.5 ～ 2
Blade length (ℓ)(mm)	4 ～ 40	2 ～ 12	4 ～ 40	13 ～ 38	15 ～ 50	8 ～ 24	8 ～ 24	8 ～ 40	8 ～ 24	8 ～ 24	16 ～ 48	18 ～ 38	2 ～ 12	4 ～ 24	6 ～ 24	4.5 ～ 18	4.5 ～ 18	4.5 ～ 18	5 ～ 26	5 ～ 56	4.5 ～ 30	4.5 ～ 18	5 ～ 38	5 ～ 56	4.5 ～ 18	4.5 ～ 18	3 ～ 9	5 ～ 12	7 ～ 18	5 ～ 36	5 ～ 36	5 ～ 36	5 ～ 36	9 ～ 33	8 ～ 24	4 ～ 45	2 ～ 10	12 ～ 40	5 ～ 30	9 ～ 12	15 ～ 50	15 ～ 33	15 ～ 45	9 ～ 56	8 ～ 24
Number of flutes(sheet)	3	4	4	6 ～ 8	4	4	3	4	3	4	3	4	3	3	4	3	4	3	3	3	4	4	4	4	3	4	4	6	3	2	3	2	3	3	3	4	3	3	4	4	6 ～ 8	4	6	4	4
Overall Length (L)(mm)	70 ～ 185	50 ～ 100	50 ～ 130	50 ～ 100	50 ～ 100	70 ～ 110	50 ～ 100	50 ～ 150	80 ～ 160	80 ～ 160	60 ～ 110	60 ～ 100	50 ～ 100	50 ～ 100	70 ～ 180	40 ～ 65	40 ～ 65	60 ～ 100	60 ～ 100	60 ～ 130	80 ～ 200	60 ～ 100	60 ～ 110	60 ～ 130	80 ～ 160	80 ～ 160	50	60 ～ 85	60 ～ 100	40 ～ 80	40 ～ 80	40 ～ 80	40 ～ 80	80 ～ 200	70 ～ 140	50 ～ 110	60 ～ 70	80 ～ 150	60 ～ 160	50 ～ 60	90 ～ 180	130 ～ 200	60 ～ 125	50 ～ 140	70 ～ 110
work material	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Stainless Steel[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]
Shank diameter (d)(mm)	6 ～ 20	4 ～ 12	4 ～ 20	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 12	6 ～ 20	6 ～ 12	6 ～ 12	6 ～ 16	6 ～ 12	4 ～ 12	4 ～ 12	4 ～ 16	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 16	6 ～ 16	6	6 ～ 12	6 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 20	4 ～ 12	4 ～ 20	6	6 ～ 20	6 ～ 20	6 ～ 8	6 ～ 25	8 ～ 20	6 ～ 20	4 ～ 25	6 ～ 12
Underneck length (ℓ1)(mm)	6 ～ 15	-	-	-	-	15 ～ 42	-	-	35 ～ 108	35 ～ 108	-	-	-	-	28 ～ 120	-	-	14 ～ 68	18 ～ 70	26 ～ 92	10 ～ 18	14 ～ 68	18 ～ 73	26 ～ 92	24 ～ 105	24 ～ 105	-	11 ～ 55	-	23 ～ 50	23 ～ 50	23 ～ 50	23 ～ 50	-	28 ～ 90	-	4 ～ 15	-	9 ～ 60	-	-	-	-	-	15 ～ 42
Machining Application	Side / Curved surface	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Groove	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Side / Curved surface	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Groove
Coating	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	DLC	DLC	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiAlN	For High Hardness (Silicon Group)	TiAlN	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)
Type	radius	High-Feed Radius	High-Feed Radius	radius	radius	radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	radius	radius	High-Feed Radius	High-Feed Radius	Long-Neck Radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	Tapered neck radius	Tapered neck radius	High-Feed Radius	radius	radius	radius	radius	radius	radius	radius	Long-Neck Radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius
Torsion Angle (θ)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)
R Precision(μm)	0.015～-0.015	±0.015	±0.015	-	0～-0.030	-	-	-	-	-	±0.02	±0.02	±0.015	±0.015	±0.015	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.02	±0.02	±0.005	±0.02	±0.02	±0.01 ～ ±0.02	±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.02	±0.015	±0.02	-	-	-	-	-	-	-	0～+0.04	-

Configure

Specification/Dimensions

Blade diameter (D)(φ)
0

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

1.2

1.4

1.5

1.6

1.8

2

2.5

2.8

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

12

13

14

16

17

18

20

22

25
Drawing

Clear

R Size(mm)
R0

0.05

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.75

0.76

0.8

0.813

0.9

1

R1

1.1

1.2

1.219

1.3

1.4

1.5

R1.5

1.6

1.625

1.7

1.8

1.9

2

R2

2.031

2.1

2.2

2.3

2.4

2.438

2.465

2.5

R2.5

2.6

2.607

2.7

2.8

2.9

3

R3

3.05

3.2

3.5

4

R4

5

R5

6

R6

6.35

6.5

8
Drawing

Clear

Blade length (ℓ)(mm)
0.16

0.24

0.25

0.28

0.3

0.32

0.4

0.5

0.6

0.64

0.7

0.75

0.8

0.9

1

1.2

1.5

1.6

1.8

2

2.1

2.25

2.3

2.4

2.5

2.7

3

3.5

3.7

4

4.5

5

5.25

5.5

5.6

6

6.75

7

7.5

8

8.25

8.4

9

10

10.5

11

12

12.5

13

13.5

14

15

16

16.5

17

17.5

18

19

19.5

20

21

22

22.5

24

25

25.5

26

27

27.5

28

30

32

33

34

35

36

37.5

38

40

42

45

48

50

55

56

60

75
[5-56/1mm Unit(s)]
Drawing

Clear

Number of flutes(sheet)
2

3

4

5

6

8
Drawing

Clear

Overall Length (L)(mm)
11

13

16

20

25

32

34

35

39

40

45

49

50

51

52

55

56

57

58

60

62

63

65

68

70

72

74

75

80

83

85

86

88.90

90

92

94

95

100

104

105

110

115

120

121

125

130

135

140

150

155

160

170

180

185

200

220

230
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Shank diameter (d)(mm)
3

4

5

5.8

6

7.8

8

9.8

10

11

12

13

14

15

16

17

18

20

25
Drawing

Clear

Underneck length (ℓ1)(mm)
1

1.5

1.8

2

2.4

2.5

3

3.5

3.8

4

4.5

5

6

7

7.5

8

9

10

12

12.5

13

14

15

16

18

19

20

21

22

24

25

27

28

29

30

32

34

35

36

38

40

42

44

45

48

50

54

55

56

60

65

66

70

72

75

80

82

84

85

90

95

100

105

108

120

-
[11-92/1mm Unit(s)]
Drawing

Clear

Machining Application
- Plane
- Side
- Curved surface
- Groove
- Plunging (Z feed)
- Inclined Cuts
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- Dia Coat
- Non-Coated
- AlTiN
- Other
Details

Clear

Type
- radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15 to 25˚)
- Standard torsion (30-40°)
- Powerful Torsion (45°-60°)
- Other
Clear

R Precision(μm)
-0.032～-0.059

-0.025～-0.047

-0.020～-0.038

-0.014～-0.028

-0.005 to 0.005

0～-20

0～-0.05

0～-0.030

0～-0.015

0～+0.04

±0.005

±0.01

±0.015

0.015～-0.015

±0.02

0.02～-0.02

0.025～-0.025

±0.03

±0.05

10
Drawing

Clear

Narrow search by specifying Manufacturer

- MISUMI (32)
- Economy series (0)
- DIJET (8)
- OSG (6)
- KYOWA SEIKO (3)
- GUHRING (2)
- NACHI(FUJIKOSHI) (2)
- OKAZAKI SEIKO (2)
- MITSUBISHI HITACHI TOOL (1)
- SANKO MFG (1)
- THE CUT (1)
- WATERMILLS (1)
- NS TOOL (0)
- KYOCERA (0)
- ATOM (0)
- UNION TOOL (0)
- SANDVIK (0)
- MAPAL (0)
- TAIYO-TOOL (0)
- 7 LEADERS (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Radius End Mills (Carbide)

- Radius End Mills (Carbide)
- Long Neck Radius End Mills (Carbide)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Radius End Mills (Carbide)（Torsion Angle (θ)：Powerful Torsion (45°-60°)）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

R Size(mm)

Blade length (ℓ)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Shank diameter (d)(mm)

Underneck length (ℓ1)(mm)

Machining Application

Coating

Type

Torsion Angle (θ)

R Precision(μm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Radius End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Radius End Mills (Carbide)（Torsion Angle (θ)：Powerful Torsion (45°-60°)）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

R Size(mm)

Blade length (ℓ)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Shank diameter (d)(mm)

Underneck length (ℓ1)(mm)

Machining Application

Coating

Type

Torsion Angle (θ)

R Precision(μm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Radius End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB