(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 19/1/2025 sampai dengan 5:00 pada tanggal 20/1/2025. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 19/1/2025 to 5:00 (WIB) 20/1/2025. We apologize for the inconvenience. - Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Radius End Mills (Carbide)（work material：High Hardness Steel-HRC65）
| Days to Ship |
|
|---|
-
One Cut Super Radius End Mill DV-OCSR
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: 2,601,105 IDR- Days to Ship: 10 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Standard Price: 608,226 IDR- Days to Ship: 8 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model
MISUMI
[Features]
·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Standard Price: 1,012,456 IDR- Days to Ship: 8 Day(s) or more -
NACHI(FUJIKOSHI)
Excellent in fracture resistance and is ideal for corner radius and contour machining of high hardness material.
Standard Price: 1,316,156 IDR- Days to Ship: 8 Day(s) or more -
OSG
The three-dimensional negative shape of the R section provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.
Standard Price: 2,446,857 IDR- Days to Ship: 8 Day(s) or more -
MISUMI
Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Standard Price: 1,582,058 IDR- Days to Ship: 8 Day(s) or more -
MISUMI
[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Standard Price: 1,149,365 IDR- Days to Ship: 8 Day(s) or more -
MISUMI
[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Standard Price: 936,394 IDR- Days to Ship: 8 Day(s) or more -
MISUMI
[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Standard Price: 952,186 IDR- Days to Ship: 8 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Standard Price: 971,889 IDR- Days to Ship: 8 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Standard Price: 963,439 IDR- Days to Ship: 8 Day(s) or more -
- On Sale Till 31/03/2025
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade
MISUMI
[Features]
·High rigidity is achieved by adopting negative radius and short blade length without helix angle and chattering is suppressed even at pocket corners
·Since it has back taper, it is possible to perform machining without peripheral edge hitting side when machining corners
·Even for bottom surface processing, single machine can handle from middle finish to final finish, realizing reduction in process time- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
Standard Price: 636,185 IDR- Special Price Days to Ship: Same day or more -
TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model
MISUMI
Long neck type with interference prevention can be selected from a number of effective lengths
- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Standard Price: 1,081,756 IDR- Days to Ship: 8 Day(s) or more -
TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model
MISUMI
By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Standard Price: 905,970 IDR- Days to Ship: 8 Day(s) or more -
TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Taper neck is effective in suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Standard Price: 982,030 IDR- Days to Ship: 8 Day(s) or more -
MISUMI
The high precision radius end mill for shrink fit holder achieves the high accuracy and high efficiency machining
- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Standard Price: 1,063,163 IDR- Days to Ship: 8 Day(s) or more -
MISUMI
[Features]
·High helix angle end mill with radius for machining high hardness steel
·High tool rigidity minimizes tool tilt during side milling
·Machining of high hardness steel up to 65HRC is possible
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- Multi-Flutes （5 ~）
- B (Stub)
Days to Ship: 8 Day(s) or more -
TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter and 45° helix angle, enabling high-efficiency machining with high feed
·Long neck type is ideal for deep cavity milling of deep pockets, etc.
·Versatile type that can be used for engraving, side surfaces, R, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
Standard Price: 951,607 IDR- Days to Ship: 8 Day(s) or more -
CBN End Mills 2 Flutes Short with Corner Radius
OSG
2-Flute Short Corner Radius CBN-CR-EDS
·Demonstrates high performance in machining high-rigid materialsStandard Price: 4,549,099 IDR- Days to Ship: 8 Day(s) or more -
OSG
A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.
Standard Price: 1,331,500 IDR- Days to Ship: 8 Day(s) or more -
WXS Coated Multiple Flutes Short Super
OSG
Radius end mill for high-speed processing with high rigidity. High speed machining of hardened steel is also possible.
Standard Price: 2,478,235 IDR- Days to Ship: 8 Day(s) or more -
![Epoch TH, Hard Regular Flute Length with Corner R CEPR6□□□-□□-TH [Alteration Supported Product]](//id.misumi-ec.com/linked/material/fs/HCT1/PHOTO/cepr-th.jpg?$product_view_b$)
Epoch TH, Hard Regular Flute Length with Corner R CEPR6□□□-□□-TH [Alteration Supported Product]
MITSUBISHI HITACHI TOOL
[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.
Excellent cutting chip discharge and high efficiencyStandard Price: 3,666,154 IDR- Days to Ship: 8 Day(s) or more -
SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated
OKAZAKI SEIKO
Multi-function type radius end mill capable of high speed machining of high hardness materials up to 65 HRC due to the effects of OK hard coating.
Standard Price: 1,008,202 IDR- Days to Ship: 12 Day(s) or more -
CBN 2-Flute Corner Radius End Mill SBRE-2
KYOWA SEIKO
Direct carving of high hardness material and hardened steel.
It is possible to increase the depth of cut.
Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cutStandard Price: 3,107,563 IDR- Days to Ship: 10 Day(s) or more -
CBN 2-Flute Corner Radius End Mill SBREF-2
KYOWA SEIKO
Direct carving of high hardness material and hardened steel.
It is possible to increase the depth of cut.
Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cutStandard Price: 2,975,984 IDR- Days to Ship: 10 Day(s) or more -
CBN 3-Flute Corner Radius End Mill SBRE-3
KYOWA SEIKO
Direct carving of high hardness material and hardened steel.
High-efficiency machining is possible with high feed.
Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cutStandard Price: 5,357,576 IDR- Days to Ship: 10 Day(s) or more -
CBN 3-Flute Corner Radius End Mill SBREF-3
KYOWA SEIKO
Direct carving of high hardness material and hardened steel.
High-efficiency machining is possible with high feed.
Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cutStandard Price: 3,502,303 IDR- Days to Ship: 10 Day(s) or more -
SHR320 CBN High Efficiency Radius End Mill
NS TOOL
[Features]
· 3 flutes and spiral-shaped corner R provide high accuracy and high efficiency machining.Standard Price: 2,873,177 IDR- Days to Ship: 8 Day(s) or more -
Solid Carbide Square End Mill For High Hardness (5 Flutes) IC5HSVR
THE CUT
[Features]
· Employs a special coating with excellent wear and heat resistance, good smoothness and non-welding properties.
· Can be used for a wide range of machining from raw materials through to difficult-to-cut materials.
· The innovative blade shape, the use of the hardest form of carbide and the special coating all combine to allow for high speeds and high feed rates.Standard Price: 2,111,967 IDR- Days to Ship: 10 Day(s) or more
![Epoch TH, Hard Regular Flute Length with Corner R CEPR6□□□-□□-TH [Alteration Supported Product]](http://id.misumi-ec.com/linked/material/fs/HCT1/PHOTO/cepr-th.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Blade diameter (D)(φ) |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Type |
| Torsion Angle (θ) |
| R Precision(μm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | DIJET | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | MITSUBISHI HITACHI TOOL | OKAZAKI SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | NS TOOL | THE CUT |
| Product Series | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade | TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model | TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model | TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model | TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model | Epoch TH, Hard Regular Flute Length with Corner R CEPR6□□□-□□-TH [Alteration Supported Product] | Solid Carbide Square End Mill For High Hardness (5 Flutes) IC5HSVR | ||||||||||||||||||
| Days to Ship | 10 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | Same day or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 12 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||
| Blade diameter (D)(φ) | 2 ～ 20 | 2 ～ 12 | 2 ～ 20 | 6 ～ 20 | 0.5 ～ 3 | 4 ～ 12 | 4 ～ 20 | 4 ～ 12 | 4 ～ 12 | 2 ～ 12 | 2 ～ 12 | 3 ～ 12 | 4 ～ 16 | 3 ～ 12 | 3 ～ 12 | 2 ～ 6 | 6 ～ 12 | 4 ～ 12 | 3 ～ 6 | 5 ～ 13 | 6 ～ 25 | 6 ～ 20 | 4 ～ 12 | 0.3 ～ 6 | 0.3 ～ 3 | 3 ～ 6 | 0.3 ～ 2 | 0.5 ～ 2 | 6 ～ 16 |
| R Size(mm) | 0.5 ～ 3 | 0.5 ～ 2 | 0.5 ～ 3 | 0.2 ～ 2 | 0.05 ～ 0.5 | 0.813 ～ 2.438 | 0.813 ～ 2.607 | 0.813 ～ 2.438 | 0.813 ～ 2.438 | 0.5 ～ 2 | 0.5 ～ 2 | 0.75 ～ 3 | 1 ～ 3 | 0.8 ～ 2 | 0.8 ～ 2 | 0.2 ～ 0.5 | 0.5 ～ 2 | 1 ～ 2 | 0.2 ～ 2 | 1.2 ～ 3 | 0.2 ～ 3 | 0.3 ～ 3 | 0.5 ～ 2 | - | - | - | - | 0.1 ～ 0.3 | 0.5 ～ 2 |
| Blade length (ℓ)(mm) | 4 ～ 40 | 2 ～ 12 | 4 ～ 40 | 13 ～ 38 | 0.3 ～ 1.8 | 8 ～ 24 | 8 ～ 40 | 8 ～ 24 | 8 ～ 24 | 2 ～ 12 | 4 ～ 24 | 1.2 ～ 5 | 6 ～ 24 | 4.5 ～ 18 | 4.5 ～ 18 | 3 ～ 9 | 5 ～ 12 | 8 ～ 24 | 3 ～ 6 | 2 ～ 5.5 | 15 ～ 50 | 15 ～ 45 | 8 ～ 24 | 0.3 ～ 2 | 0.3 ～ 2 | 1.5 ～ 2 | 0.5 ～ 1.5 | 0.25 ～ 1 | 17 ～ 45 |
| Number of flutes(sheet) | 3 | 4 | 4 | 6 ～ 8 | 2 | 3 | 4 | 3 | 4 | 3 | 3 | 4 | 4 | 3 | 4 | 4 | 6 | 3 | 2 | 4 | 6 ～ 8 | 6 | 4 | 2 | 2 | 3 | 3 | - | 5 |
| Overall Length (L)(mm) | 70 ～ 185 | 50 ～ 100 | 50 ～ 130 | 50 ～ 100 | 45 ～ 50 | 50 ～ 100 | 50 ～ 150 | 80 ～ 160 | 80 ～ 160 | 50 ～ 100 | 50 ～ 100 | 60 ～ 110 | 70 ～ 180 | 80 ～ 160 | 80 ～ 160 | 50 | 60 ～ 85 | 70 ～ 140 | 45 ～ 50 | 80 ～ 110 | 90 ～ 180 | 60 ～ 125 | 70 ～ 110 | 50 ～ 60 | 50 ～ 60 | 50 ～ 70 | 50 | 50 ～ 52 | 60 ～ 110 |
| work material | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[○] |
| Shank diameter (d)(mm) | 6 ～ 20 | 4 ～ 12 | 4 ～ 20 | 6 ～ 20 | 4 ～ 6 | 6 ～ 12 | 6 ～ 20 | 6 ～ 12 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 ～ 12 | 4 ～ 16 | 6 ～ 16 | 6 ～ 16 | 6 | 6 ～ 12 | 4 ～ 12 | 6 | 6 ～ 12 | 6 ～ 25 | 6 ～ 20 | 6 ～ 12 | 6 | 4 | 6 | 4 | 4 | 6 ～ 16 |
| Underneck length (ℓ1)(mm) | 6 ～ 15 | - | - | - | 1.5 ～ 6 | - | - | 35 ～ 108 | 35 ～ 108 | - | - | 7.5 ～ 24 | 28 ～ 120 | 24 ～ 105 | 24 ～ 105 | - | 11 ～ 55 | 28 ～ 90 | - | 12.5 | - | - | 15 ～ 42 | - | - | - | - | 1.5 ～ 10 | - |
| Machining Application | Side / Curved surface | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface | Side / Curved surface | Plane / Side / Groove | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Groove | Side / Curved surface |
| Coating | - | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | - | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Other |
| Type | radius | High-Feed Radius | High-Feed Radius | radius | radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | Long-Neck Radius | Tapered neck radius | Tapered neck radius | High-Feed Radius | radius | Long-Neck Radius | radius | radius | radius | radius | radius | radius | radius | High-Feed Radius | High-Feed Radius | radius | High-Feed Radius |
| Torsion Angle (θ) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | - | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | No torsion | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | No torsion | No torsion | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Powerful Torsion (45°-60°) |
| R Precision(μm) | 0.015～-0.015 | ±0.015 | ±0.015 | - | - | - | - | - | - | ±0.015 | ±0.015 | ±0.02 | ±0.015 | ±0.02 | ±0.02 | ±0.005 | ±0.02 | ±0.015 | - | - | - | - | - | - | - | - | - | -0.005 to 0.005 | - |
![Epoch TH, Hard Regular Flute Length with Corner R CEPR6□□□-□□-TH [Alteration Supported Product]](http://id.misumi-ec.com/linked/material/fs/HCT1/PHOTO/cepr-th.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
R Size(mm)
-
Blade length (ℓ)(mm)
- 0.16
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.5
- 0.6
- 0.64
- 0.7
- 0.75
- 0.8
- 0.9
- 1
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.1
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3.5
- 3.7
- 4
- 4.5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6.75
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10.5
- 11
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 22
- 22.5
- 24
- 25
- 25.5
- 26
- 27
- 27.5
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 42
- 45
- 48
- 50
- 55
- 56
- 60
- 75
[5-12/1mm Unit(s)]
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Type
- radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Torsion Angle (θ)
-
R Precision(μm)
Narrow search by specifying Manufacturer
-
- KYOWA SEIKO (4)
- OSG (4)
- DIJET (1)
- MITSUBISHI HITACHI TOOL (1)
- NACHI(FUJIKOSHI) (1)
- NS TOOL (1)
- OKAZAKI SEIKO (1)
- THE CUT (1)
- KYOCERA (0)
- ATOM (0)
- WATERMILLS (0)
- UNION TOOL (0)
- SANDVIK (0)
- SANKO MFG (0)
- MAPAL (0)
- TAIYO-TOOL (0)
- GUHRING (0)
- 7 LEADERS (0)
CAD
-
- 2D
- 3D
Related Categories to Radius End Mills (Carbide)
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy